- 06 Apr, 2012 2 commits
-
-
Bob Liu authored
Add __gpio_get_value()/__gpio_set_value() to fix compile error if CONFIG_GPIOLIB = n. Signed-off-by:
Bob Liu <lliubbo@gmail.com>
-
Mike Frysinger authored
This patch fix below compile error: "bfin-uclinux-ld: L1 data A overflow!" It is due to the recent lib/gen_crc32table.c change: 46c5801e crc32: bolt on crc32c it added 8KiB more data to __cacheline_aligned which cause blackfin L1 data cache overflow. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
Bob Liu <lliubbo@gmail.com>
-
- 05 Apr, 2012 20 commits
-
-
Linus Torvalds authored
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
-
Michal Hocko authored
Although mem_cgroup_uncharge_swap has an empty placeholder for !CONFIG_CGROUP_MEM_RES_CTLR_SWAP the definition is placed in the CONFIG_SWAP ifdef block so we are missing the same definition for !CONFIG_SWAP which implies !CONFIG_CGROUP_MEM_RES_CTLR_SWAP. This has not been an issue before, because mem_cgroup_uncharge_swap was not called from !CONFIG_SWAP context. But Hugh Dickins has a cleanup patch to call __mem_cgroup_commit_charge_swapin which is defined also for !CONFIG_SWAP. Let's move both the empty definition and declaration outside of the CONFIG_SWAP block to avoid the following compilation error: mm/memcontrol.c: In function '__mem_cgroup_commit_charge_swapin': mm/memcontrol.c:2837: error: implicit declaration of function 'mem_cgroup_uncharge_swap' if CONFIG_SWAP is disabled. Reported-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ashish Jangam authored
DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by:
David Dajun Chen <dchen@diasemi.com> Signed-off-by:
Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Acked-by:
Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christopher Li authored
Signed-off-by:
Christopher Li <sparse@chrisli.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
remoteproc.txt should have been .h Signed-off-by:
Joe Perches <joe@perches.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Fleming authored
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check for shared signals we're about to block. Also, use the new helper function introduced in commit 5e6292c0 ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Julia Lawall authored
Find instances of an open-coded simple_open() and replace them with calls to simple_open(). Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Reported-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Stephen Boyd authored
debugfs and a few other drivers use an open-coded version of simple_open() to pass a pointer from the file to the read/write file ops. Add support for this simple case to libfs so that we can remove the many duplicate copies of this simple function. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Hillf Danton authored
It was introduced by d1d5e05f ("hugetlbfs: return error code when initializing module") but as Al pointed out, is a bad idea. Quoted comments from Al: "Note that unregister_filesystem() in module init is *always* wrong; it's not an issue here (it's done too early to care about and realistically the box is not going anywhere - it'll panic when attempt to exec /sbin/init fails, if not earlier), but it's a damn bad example. Consider a normal fs module. Somebody loads it and in parallel with that we get a mount attempt on that fs type. It comes between register and failure exits that causes unregister; at that point we are screwed since grabbing a reference to module as done by mount is enough to prevent exit, but not to prevent the failure of init. As the result, module will get freed when init fails, mounted fs of that type be damned." So remove it. Signed-off-by:
Hillf Danton <dhillf@gmail.com> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jett.Zhou authored
According to 88pm860x spec, rtc alarm irq enable control is bit3 for RTC_ALARM_EN, so fix it. Signed-off-by:
Jett.Zhou <jtzhou@marvell.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
This allocation can be as large as 64k. - Add __GFP_NOWARN so the a falied kmalloc() is silent - Fall back to vmalloc() if the kmalloc() failed Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrew Morton authored
This allocation can be as large as 64k. As David points out, "falling back to vmalloc here is much better solution than failing to retreive the attribute - it will work no matter how fragmented memory gets. That means we don't get incomplete backups occurring after days or months of uptime and successful backups". Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Jones <davej@codemonkey.org.uk> Cc: David Rientjes <rientjes@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jones authored
This size is user controllable, up to a maximum of XATTR_LIST_MAX (64k). So it's trivial for someone to trigger a stream of order:4 page allocation errors. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Dave Chinner <david@fromorbit.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Vorontsov authored
Change send_sig_all() to use do_send_sig_info(SEND_SIG_FORCED) instead of force_sig(SIGKILL). With the recent changes we do not need force_ to kill the CLONE_NEWPID tasks. And this is more correct. force_sig() can race with the exiting thread, while do_send_sig_info(group => true) kill the whole process. Some more notes from Oleg Nesterov: > Just one note. This change makes no difference for sysrq_handle_kill(). > But it obviously changes the behaviour sysrq_handle_term(). I think > this is fine, if you want to really kill the task which blocks/ignores > SIGTERM you can use sysrq_handle_kill(). > > Even ignoring the reasons why force_sig() is simply wrong here, > force_sig(SIGTERM) looks strange. The task won't be killed if it has > a handler, but SIG_IGN can't help. However if it has the handler > but blocks SIGTERM temporary (this is very common) it will be killed. Also, > force_sig() can't kill the process if the main thread has already > exited. IOW, it is trivial to create the process which can't be > killed by sysrq. So, this patch fixes the issue. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vasiliy Kulikov authored
The proc_parse_options() call from proc_mount() runs only once at boot time. So on any later mount attempt, any mount options are ignored because ->s_root is already initialized. As a consequence, "mount -o <options>" will ignore the options. The only way to change mount options is "mount -o remount,<options>". To fix this, parse the mount options unconditionally. Signed-off-by:
Vasiliy Kulikov <segoon@openwall.com> Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Tested-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull CIFS fixes from Steve French. * git://git.samba.org/sfrench/cifs-2.6: Fix UNC parsing on mount Remove unnecessary check for NULL in password parser CIFS: Fix VFS lock usage for oplocked files Revert "CIFS: Fix VFS lock usage for oplocked files" cifs: writing past end of struct in cifs_convert_address() cifs: silence compiler warnings showing up with gcc-4.7.0 CIFS: Fix VFS lock usage for oplocked files
-
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdbLinus Torvalds authored
Pull KGDB/KDB regression fixes from Jason Wessel: - Fix a Smatch warning that appeared in the 3.4 merge window - Fix kgdb test suite with SMP for all archs without HW single stepping - Fix kgdb sw breakpoints with CONFIG_DEBUG_RODATA=y limitations on x86 - Fix oops on kgdb test suite with CONFIG_DEBUG_RODATA - Fix kgdb test suite with SMP for all archs with HW single stepping * tag 'for_linus-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: x86,kgdb: Fix DEBUG_RODATA limitation using text_poke() kgdb,debug_core: pass the breakpoint struct instead of address and memory kgdbts: (2 of 2) fix single step awareness to work correctly with SMP kgdbts: (1 of 2) fix single step awareness to work correctly with SMP kgdbts: Fix kernel oops with CONFIG_DEBUG_RODATA kdb: Fix smatch warning on dbg_io_ops->is_console
-
git://git.linaro.org/people/mszyprowski/linux-dma-mappingLinus Torvalds authored
Pull DMA mapping branch from Marek Szyprowski: "Short summary for the whole series: A few limitations have been identified in the current dma-mapping design and its implementations for various architectures. There exist more than one function for allocating and freeing the buffers: currently these 3 are used dma_{alloc, free}_coherent, dma_{alloc,free}_writecombine, dma_{alloc,free}_noncoherent. For most of the systems these calls are almost equivalent and can be interchanged. For others, especially the truly non-coherent ones (like ARM), the difference can be easily noticed in overall driver performance. Sadly not all architectures provide implementations for all of them, so the drivers might need to be adapted and cannot be easily shared between different architectures. The provided patches unify all these functions and hide the differences under the already existing dma attributes concept. The thread with more references is available here: http://www.spinics.net/lists/linux-sh/msg09777.html These patches are also a prerequisite for unifying DMA-mapping implementation on ARM architecture with the common one provided by dma_map_ops structure and extending it with IOMMU support. More information is available in the following thread: http://thread.gmane.org/gmane.linux.kernel.cross-arch/12819 More works on dma-mapping framework are planned, especially in the area of buffer sharing and managing the shared mappings (together with the recently introduced dma_buf interface: commit d15bd7ee "dma-buf: Introduce dma buffer sharing mechanism"). The patches in the current set introduce a new alloc/free methods (with support for memory attributes) in dma_map_ops structure, which will later replace dma_alloc_coherent and dma_alloc_writecombine functions." People finally started piping up with support for merging this, so I'm merging it as the last of the pending stuff from the merge window. Looks like pohmelfs is going to wait for 3.5 and more external support for merging. * 'for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: common: DMA-mapping: add NON-CONSISTENT attribute common: DMA-mapping: add WRITE_COMBINE attribute common: dma-mapping: introduce mmap method common: dma-mapping: remove old alloc_coherent and free_coherent methods Hexagon: adapt for dma_map_ops changes Unicore32: adapt for dma_map_ops changes Microblaze: adapt for dma_map_ops changes SH: adapt for dma_map_ops changes Alpha: adapt for dma_map_ops changes SPARC: adapt for dma_map_ops changes PowerPC: adapt for dma_map_ops changes MIPS: adapt for dma_map_ops changes X86 & IA64: adapt for dma_map_ops changes common: dma-mapping: introduce generic alloc() and free() methods
-
- 04 Apr, 2012 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull more power management updates from Rafael Wysocki: - Patch series that hopefully fixes races between the freezer and request_firmware() and request_firmware_nowait() for good, with two cleanups from Stephen Boyd on top. - Runtime PM fix from Alan Stern preventing tasks from getting stuck indefinitely in the runtime PM wait queue. - Device PM QoS update from MyungJoo Ham introducing a new variant of pm_qos_update_request() allowing the callers to specify a timeout. * tag 'pm-for-3.4-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / QoS: add pm_qos_update_request_timeout() API firmware_class: Move request_firmware_nowait() to workqueues firmware_class: Reorganize fw_create_instance() PM / Sleep: Mitigate race between the freezer and request_firmware() PM / Sleep: Move disabling of usermode helpers to the freezer PM / Hibernate: Disable usermode helpers right before freezing tasks firmware_class: Do not warn that system is not ready from async loads firmware_class: Split _request_firmware() into three functions, v2 firmware_class: Rework usermodehelper check PM / Runtime: don't forget to wake up waitqueue on failure
-
Linus Torvalds authored
Merge common_audit_data cleanup patches from Eric Paris. This is really too late, but it's a long-overdue cleanup of the costly wrapper functions for the security layer. The "struct common_audit_data" is used all over in critical paths, allocated and initialized on the stack. And used to be much too large, causing not only unnecessarily big stack frames but the clearing of the (mostly useless) data was also very visible in profiles. As a particular example, in one microbenchmark for just doing "stat()" over files a lot, selinux_inode_permission() used 7% of the CPU time. That's despite the fact that it doesn't actually *do* anything: it is just a helper wrapper function in the selinux security layer. This patch-series shrinks "struct common_audit_data" sufficiently that code generation for these kinds of wrapper functions is improved noticeably, and we spend much less time just initializing data that we will never use. The functions still get called all the time, and it still shows up at 3.5+% in my microbenchmark, but it's quite a bit lower down the list, and much less noticeable. * Emailed patches from Eric Paris <eparis@redhat.com>: lsm_audit: don't specify the audit pre/post callbacks in 'struct common_audit_data' SELinux: do not allocate stack space for AVC data unless needed SELinux: remove avd from slow_avc_audit() SELinux: remove avd from selinux_audit_data LSM: shrink the common_audit_data data union LSM: shrink sizeof LSM specific portion of common_audit_data
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull a single regmap fix from Mark Brown: "A simple bug that's been lurking for a while but not terribly visible since a high proportion of chips have no register 0 so the normal failure is that we end up doing a bit of extra I/O." * tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: rbtree: Fix register default look-up in sync
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator fixes from Mark Brown: "A bunch of smallish fixes that came up during the merge window as things got more testing - even more fixes from Axel, a fix for error handling in more complex systems using -EPROBE_DEFER and a couple of small fixes for the new dummy regulators." * tag 'regulator-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Remove non-existent parameter from fixed-helper.c kernel doc regulator: Fix setting new voltage in s5m8767_set_voltage regulator: fix sysfs name collision between dummy and fixed dummy regulator regulator: Fix deadlock on removal of regulators with supplies regulator: Fix comments in include/linux/regulator/machine.h regulator: Only update [LDOx|DCx]_HIB_MODE bits in wm8350_[ldo|dcdc]_set_suspend_disable regulator: Fix setting low power mode for wm831x aldo regulator: Return microamps in wm8350_isink_get_current regulator: wm8350: Fix the logic to choose best current limit setting regulator: wm831x-isink: Fix the logic to choose best current limit setting regulator: wm831x-dcdc: Fix the logic to choose best current limit setting regulator: anatop: patching to device-tree property "reg". regulator: Do proper shift to set correct bit for DC[2|5]_HIB_MODE setting regulator: Fix restoring pmic.dcdcx_hib_mode settings in wm8350_dcdc_set_suspend_enable regulator: Fix unbalanced lock/unlock in mc13892_regulator_probe error path regulator: Fix set and get current limit for wm831x_buckv regulator: tps6586x: Fix list minimal voltage setting for LDO0
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/p4: Add format attributes tracing, sched, vfs: Fix 'old_pid' usage in trace_sched_process_exec()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kvm: Call restore_sched_clock_state() only after %gs is initialized x86: Use -mno-avx when available x86: Remove the ancient and deprecated disable_hlt() and enable_hlt() facility x86: Preserve lazy irq disable semantics in fixup_irqs()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-stagingLinus Torvalds authored
Pull hwmon patches from Guenter Roeck: - Fix crash in ad7314 driver - Add support for AMD Trinity CPUs to k10temp driver - Fix __initdata/__initconst mixup in w83627ehf driver - Fix runtime warnings in acpi_power_meter and max6639 drivers - Fix build warnings in adm1031, f75375s, sht15, and gpio-fan drivers * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (ad7314) Adds missing spi_dev initialization hwmon: (k10temp) Add support for AMD Trinity CPUs hwmon: (w83627ehf) mark const init data with __initconst instead of __initdata hwmon: (acpi_power_meter) fix lockdep spew due to non-static lock class hwmon: (adm1031) Fix compiler warning hwmon: (f75375s) Fix warning message seen in some configurations hwmon: (max6639) Convert to dev_pm_ops hwmon: (sht15) Fix Kconfig dependencies hwmon: (gpio-fan) Fix Kconfig dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds authored
Pull MCE fixlet from Borislav Petkov: "One fix which makes MCE decoding much more "liberal" wrt families." * tag 'mce-fix-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: MCE, AMD: Drop too granulary family model checks
-
git://neil.brown.name/mdLinus Torvalds authored
Pull assorted md fixes from Neil Brown: - some RAID levels didn't clear up properly if md_integrity_register failed - a 'check' of RAID5/RAID6 doesn't actually read any data since a recent patch - so fix that (and mark for -stable) - a couple of other minor bugs. * tag 'md-3.4-fixes' of git://neil.brown.name/md: md/raid1,raid10: don't compare excess byte during consistency check. md/raid5: Fix a bug about judging if the operation is syncing or replacing md/raid1:Remove unnecessary rcu_dereference(conf->mirrors[i].rdev). md: Avoid OOPS when reshaping raid1 to raid0 md/raid5: fix handling of bad blocks during recovery. md/raid1: If md_integrity_register() failed,run() must free the mem md/raid0: If md_integrity_register() fails, raid0_run() must free the mem. md/linear: If md_integrity_register() fails, linear_run() must free the mem.
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Nothing too big here, just small fixes." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix more fallout from 9f97da78 (Disintegrate asm/system.h for ARM) ARM: fix bios32.c build warning ARM: 7337/1: ptrace: fix ptrace_read_user for !CONFIG_MMU platforms ARM: fix missing bug.h include in arch/arm/kernel/insn.c ARM: sa11x0: fix build errors from DMA engine API updates
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull Sparc fixes from David Miller: "One build regression and one serial probe regression fix on sparc." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: serial/sunzilog: fix keyboard on SUN SPARCstation sparc: pgtable_64: change include order
-
Paul Gortmaker authored
To fix: In file included from kernel/exit.c:61: arch/avr32/include/asm/mmu_context.h: In function 'enable_mmu': arch/avr32/include/asm/mmu_context.h:135: error: implicit declaration of function 'nop' It needs an include of the new file created in commit ae473946 ("Disintegrate asm/system.h for AVR32"), but since that file only contains "nop", and since other arch already have precedent of putting nop in asm/barrier.h we should just delete the new file and put nop in barrier.h Suggested-and-acked-by:
David Howells <dhowells@redhat.com> Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
This reverts commit d06221c0. It turns out to trigger the "BUG_ON(!PageCompound(page))" in kfree(), apparently because the code ends up trying to free somethng that was never kmalloced in the first place. BenH points out that the patch was untested and wasn't meant to go into the upstream kernel that quickly in the first place. Backtrace: bios_shadow bios_shadow_prom nv_mask init_io bios_shadow nouveau_bios_init NVReadVgaCrtc NVSetOwner nouveau_card_init nouveau_load Reported-by:
Meelis Roos <mroos@linux.ee> Requested-by:
Dave Airlie <airlied@gmail.com> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Borislav Petkov authored
MCA details seldom change inbetween the models of a family so don't be too conservative and enable decoding on everything starting from K8 onwards. Minor adjustments can come in later but most importantly, we have some decoding infrastructure in place for upcoming models by default. Signed-off-by:
Borislav Petkov <borislav.petkov@amd.com>
-
Sam Ravnborg authored
The keyboard on my SUN SPARCstation 5 no longer worked. The culprint was: d4e33fac ("serial: Kill off NO_IRQ") Fix up logic for no irq / irq so the keyboard works again. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Cc: Alan Cox <alan@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Sachin Prabhu authored
The code cleanup of cifs_parse_mount_options resulted in a new bug being introduced in the parsing of the UNC. This results in vol->UNC being modified before vol->UNC was allocated. Reported-by:
Steve French <smfrench@gmail.com> Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-
Graeme Smecher authored
This driver was recently moved from IIO (where it worked) to hwmon (where it doesn't.) This breakage occured because the hwmon version neglected to correctly initialize a reference to spi_dev in its drvdata. The result is a segfault every time the temperature is queried. Signed-off-by:
Graeme Smecher <gsmecher@threespeedlogic.com> Cc: stable@vger.kernel.org # 3.2+ Signed-off-by:
Guenter Roeck <guenter.roeck@ericsson.com>
-
- 03 Apr, 2012 1 commit
-
-
Sachin Prabhu authored
The password parser has an unnecessary check for a NULL value which triggers warnings in source checking tools. The code contains artifacts from the old parsing code which are no longer required. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steve French <sfrench@us.ibm.com>
-