The driver used NET_IP_ALIGN to remove some additional padding inside of
the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2
which removed the correct amount of bytes.

On MCORE2-machines commit ea812ca1
introduces a change which sets NET_IP_ALIGN to 0 by default. Which
triggered the bug on these machines.

This fix introduces a new RXW_PADDING define and uses this instead of
NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which
is provided by SMSC.
Signed-off-by: Nico Erfurth <ne@erfurth.eu>
Tested-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>

RFC 4291 Section 2.7 says Multicast addresses must not be used as source
addresses in IPv6 packets - drop them on input so we don't process the
packet further.
Signed-off-by: Brian Haley <brian.haley@hp.com>
Reported-and-Tested-by: Kumar Sanghvi <divinekumar@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The link down would occur when reseting PHY. And it would take about 2 ~ 5 seconds
from link down to link up. If the delay of pm_schedule_suspend is not long enough,
the device would enter runtime_suspend before link up. After link up, the device
would wake up and reset PHY again. Then, you would find the driver keep in a loop
of runtime_suspend and rumtime_resume.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

.. with new name.  Because nothing says "really solid kernel release"
like naming it after an extinct animal that just happened to be in the
news lately.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (31 commits)
  ARM: OMAP: Fix export.h or module.h includes
  ARM: OMAP: omap_device: Include linux/export.h
  ARM: OMAP2: Fix H4 matrix keyboard warning
  ARM: OMAP1: Remove unused omap-alsa.h
  ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
  ARM: OMAP2+: timer: Remove omap_device_pm_latency
  ARM: OMAP2+: clock data: Remove redundant timer clkdev
  ARM: OMAP: Devkit8000: Remove double omap_mux_init_gpio
  ARM: OMAP: usb: musb: OMAP: Delete unused function
  MAINTAINERS: Update linux-omap git repository
  ARM: OMAP: change get_context_loss_count ret value to int
  ARM: OMAP4: hsmmc: configure SDMMC1_DR0 properly
  ARM: OMAP4: hsmmc: Fix Pbias configuration on regulator OFF
  ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
  ARM: OMAP: I2C: Fix omap_register_i2c_bus() return value on success
  ARM: OMAP: dmtimer: Include linux/module.h
  ARM: OMAP2+: l3-noc: Include linux/module.h
  ARM: OMAP2+: devices: Fixes for McPDM
  ARM: OMAP: Fix errors and warnings when building for one board
  ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
  ...

Mountpoint crossing is similar to following procfs symlinks - we do
not get ->d_revalidate() called for dentry we have arrived at, with
unpleasant consequences for NFS4.

Simple way to reproduce the problem in mainline:

    cat >/tmp/a.c <<'EOF'
    #include <unistd.h>
    #include <fcntl.h>
    #include <stdio.h>
    main()
    {
            struct flock fl = {.l_type = F_RDLCK, .l_whence = SEEK_SET, .l_len = 1};
            if (fcntl(0, F_SETLK, &fl))
                    perror("setlk");
    }
    EOF
    cc /tmp/a.c -o /tmp/test

then on nfs4:

    mount --bind file1 file2
    /tmp/test < file1		# ok
    /tmp/test < file2		# spews "setlk: No locks available"...

What happens is the missing call of ->d_revalidate() after mountpoint
crossing and that's where NFS4 would issue OPEN request to server.

The fix is simple - treat mountpoint crossing the same way we deal with
following procfs-style symlinks.  I.e.  set LOOKUP_JUMPED...

Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf top: Fix live annotation in the --stdio interface
  perf top tui: Don't recalc column widths considering just the first page
  perf report: Add progress bar when processing time ordered events
  perf hists browser: Warn about lost events
  perf tools: Fix a typo of command name as trace-cmd
  perf hists: Fix recalculation of total_period when sorting entries
  perf header: Fix build on old systems
  perf ui browser: Handle K_RESIZE in dialog windows
  perf ui browser: No need to switch char sets that often
  perf hists browser: Use K_TIMER
  perf ui: Rename ui__warning_paranoid to ui__error_paranoid
  perf ui: Reimplement the popup windows using libslang
  perf ui: Reimplement ui__popup_menu using ui__browser
  perf ui: Reimplement ui_helpline using libslang
  perf ui: Improve handling sigwinch a bit
  perf ui progress: Reimplement using slang
  perf evlist: Fix grouping of multiple events

Commit 32aaeffb (Merge branch
'modsplit-Oct31_2011'...) caused some build errors. Fix these
and make sure we always have export.h or module.h included
for MODULE_ and EXPORT_SYMBOL users:

$ grep -rl ^MODULE_ arch/arm/*omap*/*.c | xargs \
  grep -L linux/module.h
  arch/arm/mach-omap2/dsp.c
  arch/arm/mach-omap2/mailbox.c
  arch/arm/mach-omap2/omap-iommu.c
  arch/arm/mach-omap2/smartreflex.c

Also check we either have export.h or module.h included
for the files exporting symbols:

$ grep -rl EXPORT_SYMBOL arch/arm/*omap*/*.c | xargs \
  grep -L linux/export.h | xargs grep -L linux/module.h

Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Include linux/export.h to fix below build warning:

  CC      arch/arm/plat-omap/omap_device.o
arch/arm/plat-omap/omap_device.c:1055: warning: data definition has no type or storage class
arch/arm/plat-omap/omap_device.c:1055: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL'
arch/arm/plat-omap/omap_device.c:1055: warning: parameter names (without types) in function declaration
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
  forcedeth: fix a few sparse warnings (variable shadowing)
  forcedeth: Improve stats counters
  forcedeth: remove unneeded stats updates
  forcedeth: Acknowledge only interrupts that are being processed
  forcedeth: fix race when unloading module
  MAINTAINERS/rds: update maintainer
  wanrouter: Remove kernel_lock annotations
  usbnet: fix oops in usbnet_start_xmit
  ixgbe: Fix compile for kernel without CONFIG_PCI_IOV defined
  etherh: Add MAINTAINERS entry for etherh
  bonding: comparing a u8 with -1 is always false
  sky2: fix regression on Yukon Optima
  netlink: clarify attribute length check documentation
  netlink: validate NLA_MSECS length
  i825xx:xscale:8390:freescale: Fix Kconfig dependancies
  macvlan: receive multicast with local address
  tg3: Update version to 3.121
  tg3: Eliminate timer race with reset_task
  tg3: Schedule at most one tg3_reset_task run
  tg3: Obtain PCI function number from device
  ...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This fixes the following sparse warnings:
drivers/net/ethernet/nvidia/forcedeth.c:2113:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2155:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2102:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2227:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2271:7: warning: symbol 'size' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2215:6: originally declared here
drivers/net/ethernet/nvidia/forcedeth.c:2986:20: warning: symbol 'addr' shadows an earlier one
drivers/net/ethernet/nvidia/forcedeth.c:2963:6: originally declared here
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rx byte count was off; instead use the hardware's count.  Tx packet
count was counting pre-TSO packets; instead count on-the-wire packets.
Report hardware dropped frame count as rx_fifo_errors.

- The count of transmitted packets reported by the forcedeth driver
  reports pre-TSO (TCP Segmentation Offload) packet counts and not the
  count of the number of packets sent on the wire. This change fixes
  the forcedeth driver to report the correct count. Fixed the code by
  copying the count stored in the NIC H/W to the value reported by the
  driver.

- Count rx_drop_frame errors as rx_fifo_errors:
  We see a lot of rx_drop_frame errors if we disable the rx bottom-halves
  for too long.  Normally, rx_fifo_errors would be counted in this case.
  The rx_drop_frame error count is private to forcedeth and is not
  reported by ifconfig or sysfs.  The rx_fifo_errors count is currently
  unused in the forcedeth driver.  It is reported by ifconfig as overruns.
  This change reports rx_drop_frame errors as rx_fifo_errors.
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function ndo_get_stats() updates most of the stats from hardware
registers, making the manual updates un-needed. This change removes
these manual updates. Main exception is rx_missed_errors which needs
manual update.

Another exception is rx_packets, still updated manually in this commit
to make sure this patch doesn't change behavior of driver. This will
be addressed by a future patch.
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is to avoid a race, accidentally acknowledging an interrupt that
we didn't notice and won't immediately process.  This is based solely
on code inspection; it is not known if there was an actual bug here.
Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When forcedeth module is unloaded, there exists a path that can lead
to mod_timer() after del_timer_sync(), causing an oops. This patch
short-circuits this unneeded path, which originates in
nv_get_ethtool_stats().

Tested:
  x86_64 16-way + 3 ethtool -S infinite loops + 100Mbps incoming traffic
  + rmmod/modprobe/ifconfig in a loop

Initial-Author: Salman Qazi <sqazi@google.com>
Discussion: http://patchwork.ozlabs.org/patch/123548/Signed-off-by: David Decotigny <david.decotigny@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

since it uses the module facilities.
Reported-by: Witold Baryluk <baryluk@smp.if.uj.edu.pl>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

For the files which are not themselves modular, we can change
them to include only the smaller export.h since all they are
doing is looking for EXPORT_SYMBOL.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These files didn't exist at the time of the module.h split, and
so were not fixed by the commits on that baseline.  Since they use
the EXPORT_SYMBOL and/or THIS_MODULE macros, they will need the
new export.h file included that provides them.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

update for the actual maintainer
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The BKL is gone, these annotations are useless.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the bug added in commit v3.1-rc7-1055-gf9b491ec
SKB can be NULL at this point, at least for cdc-ncm.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix compiler errors and warnings with CONFIG_PCI_IOV defined and not
defined.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  cpuidle: Single/Global registration of idle states
  cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
  cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
  cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
  ACPI: Fix CONFIG_ACPI_DOCK=n compiler warning
  ACPI: Export FADT pm_profile integer value to userspace
  thermal: Prevent polling from happening during system suspend
  ACPI: Drop ACPI_NO_HARDWARE_INIT
  ACPI atomicio: Convert width in bits to bytes in __acpi_ioremap_fast()
  PNPACPI: Simplify disabled resource registration
  ACPI: Fix possible recursive locking in hwregs.c
  ACPI: use kstrdup()
  mrst pmu: update comment
  tools/power turbostat: less verbose debugging

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (40 commits)
  vmwgfx: Snoop DMA transfers with non-covering sizes
  vmwgfx: Move the prefered mode first in the list
  vmwgfx: Unreference surface on cursor error path
  vmwgfx: Free prefered mode on error path
  vmwgfx: Use pointer return error codes
  vmwgfx: Fix hw cursor position
  vmwgfx: Infrastructure for explicit placement
  vmwgfx: Make the preferred autofit mode have a 60Hz vrefresh
  vmwgfx: Remove screen object active list
  vmwgfx: Screen object cleanups
  drm/radeon/kms: consolidate GART code, fix segfault after GPU lockup V2
  drm/radeon/kms: don't poll forever if MC GDDR link training fails
  drm/radeon/kms: fix DP setup on TRAVIS bridges
  drm/radeon/kms: set HPD polarity in hpd_init()
  drm/radeon/kms: add MSI module parameter
  drm/radeon/kms: Add MSI quirk for Dell RS690
  drm/radeon/kms: Add MSI quirk for HP RS690
  drm/radeon/kms: split MSI check into a separate function
  vmwgfx: Reinstate the update_layout ioctl
  drm/radeon/kms: always do extended edid probe
  ...

* 'urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
  writeback: fix uninitialized task_ratelimit

* git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Cleanup byte-range locking code style
  CIFS: Simplify setlk error handling for mandatory locking

* git://git.infradead.org/mtd-2.6: (226 commits)
  mtd: tests: annotate as DANGEROUS in Kconfig
  mtd: tests: don't use mtd0 as a default
  mtd: clean up usage of MTD_DOCPROBE_ADDRESS
  jffs2: add compr=lzo and compr=zlib options
  jffs2: implement mount option parsing and compression overriding
  mtd: nand: initialize ops.mode
  mtd: provide an alias for the redboot module name
  mtd: m25p80: don't probe device which has status of 'disabled'
  mtd: nand_h1900 never worked
  mtd: Add DiskOnChip G3 support
  mtd: m25p80: add EON flash EN25Q32B into spi flash id table
  mtd: mark block device queue as non-rotational
  mtd: r852: make r852_pm_ops static
  mtd: m25p80: add support for at25df321a spi data flash
  mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks
  mtd: nand: switch `check_pattern()' to standard `memcmp()'
  mtd: nand: invalidate cache on unaligned reads
  mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set
  mtd: nand: wait to set BBT version
  mtd: nand: scrub BBT on ECC errors
  ...

Fix up trivial conflicts:
 - arch/arm/mach-at91/board-usb-a9260.c
	Merged into board-usb-a926x.c
 - drivers/mtd/maps/lantiq-flash.c
	add_mtd_partitions -> mtd_device_register vs changed to use
	mtd_device_parse_register.

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix the dark space calculation
  UBIFS: introduce a helper to dump scanning info

Enough to get cursors working under Wayland.
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Make it possible to use explicit placement
(although not hooked up with a user-space interface yet)
and relax the single framebuffer limit to only apply to implicit placement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

It isn't used for anything. Replace with an active bool.

Also make a couple of functions return void instead of int
since their return value wasn't checked anyway.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakbo Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>