- 19 Sep, 2012 38 commits
-
-
Anton Blanchard authored
commit 1021cb26 upstream. If the default DSCR is non zero we set thread.dscr_inherit in copy_thread() meaning the new thread and all its children will ignore future updates to the default DSCR. This is not intended and is a change in behaviour that a number of our users have hit. We just need to inherit thread.dscr and thread.dscr_inherit from the parent which ends up being much simpler. This was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_default_test.cSigned-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Anton Blanchard authored
commit 00ca0de0 upstream. When we update the DSCR either via emulation of mtspr(DSCR) or via a change to dscr_default in sysfs we don't update thread.dscr. We will eventually update it at context switch time but there is a period where thread.dscr is incorrect. If we fork at this point we will copy the old value of thread.dscr into the child. To avoid this, always keep thread.dscr in sync with reality. This issue was found with the following testcase: http://ozlabs.org/~anton/junkcode/dscr_inherit_test.cSigned-off-by:
-
Anton Blanchard authored
commit 1b6ca2a6 upstream. Writing to dscr_default in sysfs doesn't actually change the DSCR - we rely on a context switch on each CPU to do the work. There is no guarantee we will get a context switch in a reasonable amount of time so fire off an IPI to force an immediate change. This issue was found with the following test case: http://ozlabs.org/~anton/junkcode/dscr_explicit_test.cSigned-off-by:
-
Ian Chen authored
commit 3550ccdb upstream. For several MoviNAND eMMC parts, there are known issues with secure erase and secure trim. For these specific MoviNAND devices, we skip these operations. Specifically, there is a bug in the eMMC firmware that causes unrecoverable corruption when the MMC is erased with MMC_CAP_ERASE enabled. References: http://forum.xda-developers.com/showthread.php?t=1644364 https://plus.google.com/111398485184813224730/posts/21pTYfTsCkB#111398485184813224730/posts/21pTYfTsCkBSigned-off-by:
Ian Chen <ian.cy.chen@samsung.com> Reviewed-by:
Namjae Jeon <linkinjeon@gmail.com> Acked-by:
Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Chris Ball <cjb@laptop.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Shawn Guo authored
commit 74f330bc upstream. Since commit 30832ab5 ("mmc: sdhci: Always pass clock request value zero to set_clock host op") was merged, esdhc_set_clock starts hitting "if (clock == 0)" where ESDHC_SYSTEM_CONTROL has been operated. This causes SDHCI card-detection function being broken. Fix the regression by moving "if (clock == 0)" above ESDHC_SYSTEM_CONTROL operation. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Lauri Hintsala authored
commit fc108d24 upstream. Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_enable_sdio_irq. Backtrace: [ 65.470000] ============================================= [ 65.470000] [ INFO: possible recursive locking detected ] [ 65.470000] 3.5.0-rc5 #2 Not tainted [ 65.470000] --------------------------------------------- [ 65.470000] ksdioirqd/mmc0/73 is trying to acquire lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] but task is already holding lock: [ 65.470000] (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] other info that might help us debug this: [ 65.470000] Possible unsafe locking scenario: [ 65.470000] [ 65.470000] CPU0 [ 65.470000] ---- [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] lock(&(&host->lock)->rlock#2); [ 65.470000] [ 65.470000] *** DEADLOCK *** [ 65.470000] [ 65.470000] May be due to missing lock nesting notation [ 65.470000] [ 65.470000] 1 lock held by ksdioirqd/mmc0/73: [ 65.470000] #0: (&(&host->lock)->rlock#2){-.-...}, at: [<bf054120>] mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc] [ 65.470000] [ 65.470000] stack backtrace: [ 65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98) [ 65.470000] [<c005ccb8>] (__lock_acquire+0x14f8/0x1b98) from [<c005d3f8>] (lock_acquire+0xa0/0x108) [ 65.470000] [<c005d3f8>] (lock_acquire+0xa0/0x108) from [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c) [ 65.470000] [<c02f671c>] (_raw_spin_lock_irqsave+0x48/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98) [ 65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8) [ 65.470000] BUG: spinlock lockup suspected on CPU#0, ksdioirqd/mmc0/73 [ 65.470000] lock: 0xc3358724, .magic: dead4ead, .owner: ksdioirqd/mmc0/73, .owner_cpu: 0 [ 65.470000] [<c0014990>] (unwind_backtrace+0x0/0xf4) from [<c01b46b0>] (do_raw_spin_lock+0x100/0x144) [ 65.470000] [<c01b46b0>] (do_raw_spin_lock+0x100/0x144) from [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c) [ 65.470000] [<c02f6724>] (_raw_spin_lock_irqsave+0x50/0x5c) from [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) [ 65.470000] [<bf054120>] (mxs_mmc_enable_sdio_irq+0x18/0xdc [mxs_mmc]) from [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) [ 65.470000] [<bf0541d0>] (mxs_mmc_enable_sdio_irq+0xc8/0xdc [mxs_mmc]) from [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) [ 65.470000] [<c0219b38>] (sdio_irq_thread+0x1bc/0x274) from [<c003c324>] (kthread+0x8c/0x98) [ 65.470000] [<c003c324>] (kthread+0x8c/0x98) from [<c00101ac>] (kernel_thread_exit+0x0/0x8) Reported-by:
Attila Kinali <attila@kinali.ch> Signed-off-by:
Lauri Hintsala <lauri.hintsala@bluegiga.com> Acked-by:
-
Lauri Hintsala authored
commit 1af36b2a upstream. Release the lock before mmc_signal_sdio_irq is called by mxs_mmc_irq_handler. Backtrace: [ 79.660000] ============================================= [ 79.660000] [ INFO: possible recursive locking detected ] [ 79.660000] 3.4.0-00009-g3e96082-dirty #11 Not tainted [ 79.660000] --------------------------------------------- [ 79.660000] swapper/0 is trying to acquire lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026ea3c>] mxs_mmc_enable_sdio_irq+0x18/0xd4 [ 79.660000] [ 79.660000] but task is already holding lock: [ 79.660000] (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] other info that might help us debug this: [ 79.660000] Possible unsafe locking scenario: [ 79.660000] [ 79.660000] CPU0 [ 79.660000] ---- [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] lock(&(&host->lock)->rlock#2); [ 79.660000] [ 79.660000] *** DEADLOCK *** [ 79.660000] [ 79.660000] May be due to missing lock nesting notation [ 79.660000] [ 79.660000] 1 lock held by swapper/0: [ 79.660000] #0: (&(&host->lock)->rlock#2){-.....}, at: [<c026f744>] mxs_mmc_irq_handler+0x1c/0xe8 [ 79.660000] [ 79.660000] stack backtrace: [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) [ 79.660000] [<c005f9c0>] (__lock_acquire+0x1948/0x1d48) from [<c005fea0>] (lock_acquire+0xe0/0xf8) [ 79.660000] [<c005fea0>] (lock_acquire+0xe0/0xf8) from [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) [ 79.660000] [<c03a8460>] (_raw_spin_lock_irqsave+0x44/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) [ 79.660000] BUG: spinlock lockup on CPU#0, swapper/0 [ 79.660000] lock: c398cb2c, .magic: dead4ead, .owner: swapper/0, .owner_cpu: 0 [ 79.660000] [<c0014bd0>] (unwind_backtrace+0x0/0xf4) from [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) [ 79.660000] [<c01ddb1c>] (do_raw_spin_lock+0xf0/0x144) from [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) [ 79.660000] [<c03a8468>] (_raw_spin_lock_irqsave+0x4c/0x58) from [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) [ 79.660000] [<c026ea3c>] (mxs_mmc_enable_sdio_irq+0x18/0xd4) from [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) [ 79.660000] [<c026f7fc>] (mxs_mmc_irq_handler+0xd4/0xe8) from [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) [ 79.660000] [<c006bdd8>] (handle_irq_event_percpu+0x70/0x254) from [<c006bff8>] (handle_irq_event+0x3c/0x5c) [ 79.660000] [<c006bff8>] (handle_irq_event+0x3c/0x5c) from [<c006e6d0>] (handle_level_irq+0x90/0x110) [ 79.660000] [<c006e6d0>] (handle_level_irq+0x90/0x110) from [<c006b930>] (generic_handle_irq+0x38/0x50) [ 79.660000] [<c006b930>] (generic_handle_irq+0x38/0x50) from [<c00102fc>] (handle_IRQ+0x30/0x84) [ 79.660000] [<c00102fc>] (handle_IRQ+0x30/0x84) from [<c000f058>] (__irq_svc+0x38/0x60) [ 79.660000] [<c000f058>] (__irq_svc+0x38/0x60) from [<c0010520>] (default_idle+0x2c/0x40) [ 79.660000] [<c0010520>] (default_idle+0x2c/0x40) from [<c0010a90>] (cpu_idle+0x64/0xcc) [ 79.660000] [<c0010a90>] (cpu_idle+0x64/0xcc) from [<c04ff858>] (start_kernel+0x244/0x2c8) Signed-off-by:
-
Miklos Szeredi authored
commit c9e67d48 upstream. In some cases fuse_retrieve() would return a short byte count if offset was non-zero. The data returned was correct, though. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Artem Bityutskiy authored
commit 78b495c3 upstream. UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875c UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by:
Richard Genoud <richard.genoud@gmail.com> Tested-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Jan Kara authored
commit 156bddd8 upstream. Code tracking when transaction needs to be committed on fdatasync(2) forgets to handle a situation when only inode's i_size is changed. Thus in such situations fdatasync(2) doesn't force transaction with new i_size to disk and that can result in wrong i_size after a crash. Fix the issue by updating inode's i_datasync_tid whenever its size is updated. Reported-by:
Kristian Nielsen <knielsen@knielsen-hq.org> Signed-off-by:
Jan Kara <jack@suse.cz> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Bruce Allan authored
commit d821a4c4 upstream. With a low enough MSS on the link partner and TSO enabled locally, the networking stack can periodically send a very large (e.g. 64KB) TCP message for which the driver will attempt to use more Tx descriptors than are available by default in the Tx ring. This is due to a workaround in the code that imposes a limit of only 4 MSS-sized segments per descriptor which appears to be a carry-over from the older e1000 driver and may be applicable only to some older PCI or PCIx parts which are not supported in e1000e. When the driver gets a message that is too large to fit across the configured number of Tx descriptors, it stops the upper stack from queueing any more and gets stuck in this state. After a timeout, the upper stack assumes the adapter is hung and calls the driver to reset it. Remove the unnecessary limitation of using up to only 4 MSS-sized segments per Tx descriptor, and put in a hard failure test to catch when attempting to check for message sizes larger than would fit in the whole Tx ring. Refactor the remaining logic that limits the size of data per Tx descriptor from a seemingly arbitrary 8KB to a limit based on the dynamic size of the Tx packet buffer as described in the hardware specification. Also, fix the logic in the check for space in the Tx ring for the next largest possible packet after the current one has been successfully queued for transmit, and use the appropriate defines for default ring sizes in e1000_probe instead of magic values. This issue goes back to the introduction of e1000e in 2.6.24 when it was split off from e1000. Reported-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.2: - Adjust context - Adjust for use of net_device vs e1000_ring parameter] Signed-off-by:
-
Paul Menzel authored
commit 6f33814b upstream. Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629Signed-off-by:
Paul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Adam Jackson authored
commit bc42aabc upstream. Entirely new class of fail for this one. The detailed timings are for normal CVT but the monitor really wanted CVT-R. Bugzilla: http://bugzilla.redhat/com/516471Signed-off-by:
Adam Jackson <ajax@redhat.com> Signed-off-by:
-
Jerome Glisse authored
commit 4a2b6662 upstream. It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 8d1af57a upstream. The ordering is important and the current drm code wasn't cutting it for modern DIG encoders. We need to have information about crtc before setting up the encoders so I've shifted the ordering a bit. Probably we'll need a full rework akin to danvet's recent intel patchs. This patch fixes numerous issues with DP bridge chips and makes link training much more reliable. Signed-off-by:
-
Alex Deucher authored
commit 4e58591c upstream. Some plls are shared for DP. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> [bwh: Backported to 3.2: add the dev and rdev variables, previously added upstream to support DCE6.1 which isn't supported in this version] Signed-off-by:
-
Alan Stern authored
commit 67ddbb3e upstream. This patch (as1603) adds a NOGET quirk for the Eaton Ellipse MAX UPS device. (The USB IDs were already present in hid-ids.h, apparently under a different name.) Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Laurent Bigonville <l.bigonville@edpnet.be> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Aaron Tian authored
commit b7ea95ff upstream. This patch modifies hid-multitouch driver for supporting PixArt optical touch screen. Because of the device does not have to set initial report, we apply "HID_QUIRK_NO_INIT_REPORTS" quirk and add the device into hid_blacklist[] Signed-off-by:
Aaron Tian <aaron_tian@pixart.com.tw> Signed-off-by:
-
Jakob Bornecrantz authored
commit 7c4eaca4 upstream. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Jesse Barnes authored
commit acb4b992 upstream. Each of these error messages can be caused by a broken or malicious userspace wanting to spam the dmesg with useless info. They're really not worthy of DRM_DEBUG statements either; those are generally only useful during bringup of new hardware or versions, and ought to be removed before going upstream anyway. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit f637c4c9 upstream. The i.MX cpufreq implementation uses the CPU_FREQ_TABLE helpers, so it needs to select that code to be built. This problem has apparently existed since the i.MX cpufreq code was first merged in v2.6.37. Building IMX without CPU_FREQ_TABLE results in: arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_exit': arch/arm/plat-mxc/cpufreq.c:173: undefined reference to `cpufreq_frequency_table_put_attr' arch/arm/plat-mxc/built-in.o: In function `mxc_set_target': arch/arm/plat-mxc/cpufreq.c:84: undefined reference to `cpufreq_frequency_table_target' arch/arm/plat-mxc/built-in.o: In function `mxc_verify_speed': arch/arm/plat-mxc/cpufreq.c:65: undefined reference to `cpufreq_frequency_table_verify' arch/arm/plat-mxc/built-in.o: In function `mxc_cpufreq_init': arch/arm/plat-mxc/cpufreq.c:154: undefined reference to `cpufreq_frequency_table_cpuinfo' arch/arm/plat-mxc/cpufreq.c:162: undefined reference to `cpufreq_frequency_table_get_attr' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
Konrad Rzeszutek Wilk authored
commit c96aae1f upstream. When we are finished with return PFNs to the hypervisor, then populate it back, and also mark the E820 MMIO and E820 gaps as IDENTITY_FRAMEs, we then call P2M to set areas that can be used for ballooning. We were off by one, and ended up over-writting a P2M entry that most likely was an IDENTITY_FRAME. For example: 1-1 mapping on 40000->40200 1-1 mapping on bc558->bc5ac 1-1 mapping on bc5b4->bc8c5 1-1 mapping on bc8c6->bcb7c 1-1 mapping on bcd00->100000 Released 614 pages of unused memory Set 277889 page(s) to 1-1 mapping Populating 40200-40466 pfn range: 614 pages added => here we set from 40466 up to bc559 P2M tree to be INVALID_P2M_ENTRY. We should have done it up to bc558. The end result is that if anybody is trying to construct a PTE for PFN bc558 they end up with ~PAGE_PRESENT. Reported-by-and-Tested-by:
Andre Przywara <andre.przywara@amd.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Shawn Guo authored
commit a46d2619 upstream. The binding doc and dts use properties "fsl,{cd,wp}-internal" while esdhc driver uses "fsl,{cd,wp}-controller". Fix binding doc and dts to get them match driver code. Reported-by:
-
Shawn Guo authored
commit c944b0b9 upstream. Though commit 602bf409 (ARM: imx6: exit coherency when shutting down a cpu) improves the stability of imx6q cpu hotplug a lot, there are still hangs seen with a more stressful hotplug testing. It's expected that once imx_enable_cpu(cpu, false) is called, the cpu will be taken down by hardware immediately, and the code after that will not get any chance to execute. However, this is not always the case from the testing. The cpu could possibly be alive for a few cycles before hardware actually takes it down. So rather than letting cpu execute some code that could cause a hang in these cycles, let's make the cpu spin there and wait for hardware to take it down. Signed-off-by:
-
Grazvydas Ignotas authored
commit c1c52848 upstream. omapfb does not currently set pseudo palette correctly for color depths above 16bpp, making red text invisible, command like echo -e '\e[0;31mRED' > /dev/tty1 will display nothing on framebuffer console in 24bpp mode. This is because temporary variable is declared incorrectly, fix it. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Xu, Anhua authored
commit b70ad586 upstream. Wrong order of parameters passed-in when calling hdmi/adpa /lvds_pipe_enabled(), 2nd and 3rd parameters are reversed. This bug was indroduced by commit 1519b995 Author: Keith Packard <keithp@keithp.com> Date: Sat Aug 6 10:35:34 2011 -0700 drm/i915: Fix PCH port pipe select in CPT disable paths The reachable tag for this commit is v3.1-rc1-3-g1519b995Signed-off-by:
Anhua Xu <anhua.xu@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44876Tested-by:
Daniel Schroeder <sec@dschroeder.info> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Adam Jackson authored
commit 23c99e77 upstream. Signed-off-by:
-
Luca Tettamanti authored
commit 43ca6cb2 upstream. The old interface is bugged and reads the wrong sensor when retrieving the reading for the chassis fan (it reads the CPU sensor); the new interface works fine. Reported-by:
Göran Uddeborg <goeran@uddeborg.se> Tested-by:
Luca Tettamanti <kronos.it@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
James Bottomley authored
commit 14216561 upstream. This is a particularly nasty SCSI ATA Translation Layer (SATL) problem. SAT-2 says (section 8.12.2) if the device is in the stopped state as the result of processing a START STOP UNIT command (see 9.11), then the SATL shall terminate the TEST UNIT READY command with CHECK CONDITION status with the sense key set to NOT READY and the additional sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED; mpt2sas internal SATL seems to implement this. The result is very confusing standby behaviour (using hdparm -y). If you suspend a drive and then send another command, usually it wakes up. However, if the next command is a TEST UNIT READY, the SATL sees that the drive is suspended and proceeds to follow the SATL rules for this, returning NOT READY to all subsequent commands. This means that the ordering of TEST UNIT READY is crucial: if you send TUR and then a command, you get a NOT READY to both back. If you send a command and then a TUR, you get GOOD status because the preceeding command woke the drive. This bit us badly because commit 85ef06d1 Author: Tejun Heo <tj@kernel.org> Date: Fri Jul 1 16:17:47 2011 +0200 block: flush MEDIA_CHANGE from drivers on close(2) Changed our ordering on TEST UNIT READY commands meaning that SATA drives connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas SATL sees the suspend *before* the drives get awoken by the next ATA command) resulting in lots of failed commands. The standard is completely nuts forcing this inconsistent behaviour, but we have to work around it. The fix for this is twofold: 1. Set the allow_restart flag so we wake the drive when we see it has been suspended 2. Return all TEST UNIT READY status directly to the mid layer without any further error handling which prevents us causing error handling which may offline the device just because of a media check TUR. Reported-by:
Matthias Prager <linux@matthiasprager.de> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Kashyap Desai authored
commit bd8d6dd4 upstream. The following patch moves the poll_aen_lock initializer from megasas_probe_one() to megasas_init(). This prevents a crash when a user loads the driver and tries to issue a poll() system call on the ioctl interface with no adapters present. Signed-off-by:
Kashyap Desai <Kashyap.Desai@lsi.com> Signed-off-by:
Adam Radford <aradford@gmail.com> Signed-off-by:
-
sreekanth.reddy@lsi.com authored
mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value commit 338b131a upstream. If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@lsi.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 7b125b94 upstream. They all define their chassis type as "Other" and therefore are not categorized as "laptops" by the driver, which tries to perform AUX IRQ delivery test which fails and causes touchpad not working. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42620Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johannes Berg authored
commit 4fc79db1 upstream. If the device is not started, we can't read its SRAM and attempting to do so will cause issues. Protect the debugfs read. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: - Adjust context - Pass iwl_shared not iwl_priv pointer to iwl_is_ready_rf()] Signed-off-by:
-
Johannes Berg authored
commit 94543a8d upstream. iwl_dbgfs_fh_reg_read() can cause crashes and/or BUG_ON in slub because the ifdefs are wrong, the code in iwl_dump_fh() should use DEBUGFS, not DEBUG to protect the buffer writing code. Also, while at it, clean up the arguments to the function, some code and make it generally safer. Reported-by:
-
Arnaud Patard (Rtp) authored
commit 58569aee upstream. The mv643xx ethernet controller limits the packet size for the TX checksum offloading. This patch sets this limits for Kirkwood and Dove which have smaller limits that the default. As a side note, this patch is an updated version of a patch sent some years ago: http://lists.infradead.org/pipermail/linux-arm-kernel/2010-June/017320.html which seems to have been lost. Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> [bwh: Backported to 3.2: adjust for the extra two parameters of orion_ge0{0,1}_init()] Signed-off-by:
-
Jon Hunter authored
commit 54f32a35 upstream. Calling the dmtimer function omap_dm_timer_set_source() fails if following a call to pm_runtime_put() to disable the timer. For example the following sequence would fail to set the parent clock ... omap_dm_timer_stop(gptimer); omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ); The following error message would be seen ... omap_dm_timer_set_source: failed to set timer_32k_ck as parent The problem is that, by design, pm_runtime_put() simply decrements the usage count and returns before the timer has actually been disabled. Therefore, setting the parent clock failed because the timer was still active when the trying to set the parent clock. Setting a parent clock will fail if the clock you are setting the parent of has a non-zero usage count. To ensure that this does not fail use pm_runtime_put_sync() when disabling the timer. Note that this will not be seen on OMAP1 devices, because these devices do not use the clock framework for dmtimers. Signed-off-by:
Jon Hunter <jon-hunter@ti.com> Acked-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Heiko Stuebner authored
commit b01858c7 upstream. Commit d670ac01 (ARM: SAMSUNG: DMA Cleanup as per sparse) changed the prototype of the s3c2410_dma_* functions to use the enum dma_ch instead of an generic unsigned int. In the s3c24xx dma.c s3c2410_dma_enqueue seems to have been forgotten, the other functions there were changed correctly. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Mel Gorman authored
commit bba3d8c3 upstream. The following build error occured during a parisc build with swap-over-NFS patches applied. net/core/sock.c:274:36: error: initializer element is not constant net/core/sock.c:274:36: error: (near initialization for 'memalloc_socks') net/core/sock.c:274:36: error: initializer element is not constant Dave Anglin says: > Here is the line in sock.i: > > struct static_key memalloc_socks = ((struct static_key) { .enabled = > ((atomic_t) { (0) }) }); The above line contains two compound literals. It also uses a designated initializer to initialize the field enabled. A compound literal is not a constant expression. The location of the above statement isn't fully clear, but if a compound literal occurs outside the body of a function, the initializer list must consist of constant expressions. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
- 12 Sep, 2012 2 commits
-
-
Ben Hutchings authored
-
Satoru Moriya authored
commit fe35004f upstream. Sometimes we'd like to avoid swapping out anonymous memory. In particular, avoid swapping out pages of important process or process groups while there is a reasonable amount of pagecache on RAM so that we can satisfy our customers' requirements. OTOH, we can control how aggressive the kernel will swap memory pages with /proc/sys/vm/swappiness for global and /sys/fs/cgroup/memory/memory.swappiness for each memcg. But with current reclaim implementation, the kernel may swap out even if we set swappiness=0 and there is pagecache in RAM. This patch changes the behavior with swappiness==0. If we set swappiness==0, the kernel does not swap out completely (for global reclaim until the amount of free pages and filebacked pages in a zone has been reduced to something very very small (nr_free + nr_filebacked < high watermark)). Signed-off-by:
Satoru Moriya <satoru.moriya@hds.com> Acked-by:
Minchan Kim <minchan@kernel.org> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - vmscan_swappiness() does not have a zone parameter] Signed-off-by:
-
