The variable i is always checked against unsigned value and cannot be
negative.
This patch set it as unsigned.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The sentence 'Based on' is misspelled, respell it.
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Don't use 64 'as is', as max block size in mv_cesa_ahash_cache_req. Use
CESA_MAX_HASH_BLOCK_SIZE instead, this is better for readability.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently, in mv_cesa_{md5,sha1,sha256}_init creq->state is initialized
before the call to mv_cesa_ahash_init. This is wrong because this
function fills creq with zero by using memset, so its 'state' that
contains the default DIGEST is overwritten. This commit fixes the issue
by initializing creq->state just after the call to mv_cesa_ahash_init.

Fixes: commit b0ef5106 ("crypto: marvell/cesa - initialize hash...")
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

So far, sub part of mv_cesa_int was responsible of dequeuing complete
requests, then call the 'cleanup' operation on these reqs and call the
crypto api callback 'complete'. The problem is that the transformation
context 'ctx' is retrieved only once before the while loop. Which means
that the wrong 'cleanup' operation might be called on the wrong type of
cesa requests, it can lead to memory corruptions with this message:

marvell-cesa f1090000.crypto: dma_pool_free cesa_padding, 5a5a5a5a/5a5a5a5a (bad dma)

This commit fixes the issue, by updating the transformation context for
each dequeued cesa request.

Fixes: commit 85030c51 ("crypto: marvell - Add support for chai...")
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mv_cesa_ahash_cache_req() function always returns 0, which makes
its return value pretty much useless. However, in addition to
returning a useless value, it also returns a boolean in a variable
passed by reference to indicate if the request was already cached.

So, this commit changes mv_cesa_ahash_cache_req() to return this
boolean. It consequently simplifies the only call site of
mv_cesa_ahash_cache_req(), where the "ret" variable is no longer
needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mv_cesa_ahash_init() function always returns 0, and the return
value is anyway never checked. Turn it into a function returning void.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The dma_iter parameter of mv_cesa_ahash_dma_add_cache() is never used,
so get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mv_cesa_dma_add_op() function builds a mv_cesa_tdma_desc structure
to copy the operation description to the SRAM, but doesn't explicitly
initialize the destination of the copy. It works fine because the
operatin description must be copied at the beginning of the SRAM, and
the mv_cesa_tdma_desc structure is initialized to zero when
allocated. However, it is somewhat confusing to not have a destination
defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

While debugging setkey issues, the following warnings were found while
trying to reinsert the caam module.  Fix this by avoiding the duplicated
cleanup in the probe path after caam_remove(), which has already cleaned
up the resources.

------------[ cut here ]------------
WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/mm/vmalloc.c:1490 __vunmap+0xcc/0xf4
Trying to vfree() nonexistent vm area (f2400000)
Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam]
CPU: 0 PID: 2346 Comm: modprobe Tainted: G        W       4.8.0-rc1+ #2014
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c)
[<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc)
[<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108)
[<c002e574>] (__warn) from [<c002e734>] (warn_slowpath_fmt+0x40/0x48)
[<c002e6f8>] (warn_slowpath_fmt) from [<c0151708>] (__vunmap+0xcc/0xf4)
[<c015163c>] (__vunmap) from [<c015177c>] (vunmap+0x4c/0x54)
[<c0151730>] (vunmap) from [<c001f48c>] (__iounmap+0x2c/0x30)
[<c001f460>] (__iounmap) from [<c001f118>] (iounmap+0x1c/0x20)
[<c001f0fc>] (iounmap) from [<bf247ae4>] (caam_probe+0x3dc/0x1498 [caam])
[<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8)
[<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8)
[<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810
[<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90)
[<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28)
[<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200)
[<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc)
[<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c)
[<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam])
[<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178)
[<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8)
[<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0)
[<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0)
[<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c)
---[ end trace 34e3370d88bb1786 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:594 clk_core_disable+0xe4/0x26c
Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam]
CPU: 0 PID: 2346 Comm: modprobe Tainted: G        W       4.8.0-rc1+ #2014
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c)
[<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc)
[<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108)
[<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30)
[<c002e67c>] (warn_slowpath_null) from [<c05b113c>] (clk_core_disable+0xe4/0x26c)
[<c05b1058>] (clk_core_disable) from [<c05b2e3c>] (clk_core_disable_lock+0x20/0x2c)
[<c05b2e1c>] (clk_core_disable_lock) from [<c05b2e6c>] (clk_disable+0x24/0x28)
[<c05b2e48>] (clk_disable) from [<bf247b04>] (caam_probe+0x3fc/0x1498 [caam])
[<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8)
[<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8)
[<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810
[<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90)
[<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28)
[<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200)
[<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc)
[<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c)
[<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam])
[<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178)
[<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8)
[<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0)
[<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0)
[<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c)
---[ end trace 34e3370d88bb1787 ]---
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2346 at /home/rmk/git/linux-rmk/drivers/clk/clk.c:476 clk_core_unprepare+0x204/0x388
Modules linked in: caam(+) cbc rfcomm bnep bluetooth nfsd em28xx_rc si2157 si2168 em28xx_dvb uvcvideo snd_soc_imx_sgtl5000 em28xx snd_soc_imx_spdif tveeprom snd_soc_fsl_asoc_card snd_soc_imx_audmux snd_soc_sgtl5000 imx_sdma imx2_wdt coda v4l2_mem2mem videobuf2_dma_contig snd_soc_fsl_ssi rc_cec snd_soc_fsl_spdif imx_pcm_dma videobuf2_vmalloc videobuf2_memops imx_thermal dw_hdmi_ahb_audio dw_hdmi_cec etnaviv fuse rc_pinnacle_pctv_hd [last unloaded: caam]
CPU: 0 PID: 2346 Comm: modprobe Tainted: G        W       4.8.0-rc1+ #2014
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<c0013bb0>] (dump_backtrace) from [<c0013d4c>] (show_stack+0x18/0x1c)
[<c0013d34>] (show_stack) from [<c0357c00>] (dump_stack+0xa4/0xdc)
[<c0357b5c>] (dump_stack) from [<c002e650>] (__warn+0xdc/0x108)
[<c002e574>] (__warn) from [<c002e6a4>] (warn_slowpath_null+0x28/0x30)
[<c002e67c>] (warn_slowpath_null) from [<c05b0834>] (clk_core_unprepare+0x204/0x388)
[<c05b0630>] (clk_core_unprepare) from [<c05b4c0c>] (clk_unprepare+0x2c/0x34)
[<c05b4be0>] (clk_unprepare) from [<bf247b0c>] (caam_probe+0x404/0x1498 [caam])
[<bf247708>] (caam_probe [caam]) from [<c042da8c>] (platform_drv_probe+0x58/0xb8)
[<c042da34>] (platform_drv_probe) from [<c042bb4c>] (driver_probe_device+0x1fc/0x2b8)
[<c042b950>] (driver_probe_device) from [<c042bcc4>] (__driver_attach+0xbc/0xc0) r10:00000000 r8:bf24b000 r7:00000000 r6:ef215844 r5:bf2490c4 r4:ef215810
[<c042bc08>] (__driver_attach) from [<c0429f14>] (bus_for_each_dev+0x5c/0x90)
[<c0429eb8>] (bus_for_each_dev) from [<c042b358>] (driver_attach+0x24/0x28)
[<c042b334>] (driver_attach) from [<c042b058>] (bus_add_driver+0xf4/0x200)
[<c042af64>] (bus_add_driver) from [<c042cadc>] (driver_register+0x80/0xfc)
[<c042ca5c>] (driver_register) from [<c042d960>] (__platform_driver_register+0x48/0x4c)
[<c042d918>] (__platform_driver_register) from [<bf24b018>] (caam_driver_init+0x18/0x24 [caam])
[<bf24b000>] (caam_driver_init [caam]) from [<c00098ac>] (do_one_initcall+0x44/0x178)
[<c0009868>] (do_one_initcall) from [<c010e034>] (do_init_module+0x68/0x1d8)
[<c010dfcc>] (do_init_module) from [<c00c8fbc>] (load_module+0x1974/0x20b0)
[<c00c7648>] (load_module) from [<c00c98d0>] (SyS_finit_module+0x94/0xa0)
[<c00c983c>] (SyS_finit_module) from [<c000fda0>] (ret_fast_syscall+0x0/0x1c)
---[ end trace 34e3370d88bb1788 ]---
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Threaded interrupts can perform the function of the tasklet, and much
more safely too - without races when trying to take the tasklet and
interrupt down on device removal.

With the old code, there is a window where we call tasklet_kill().  If
the interrupt handler happens to be running on a different CPU, and
subsequently calls tasklet_schedule(), the tasklet will be re-scheduled
for execution.

Switching to a hardirq/threadirq combination implementation avoids this,
and it also means generic code deals with the teardown sequencing of the
threaded and non-threaded parts.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a helper to map the source scatterlist into the descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a helper function to perform the descriptor allocation.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Strictly, dma_map_sg() may coalesce SG entries, but in practise on iMX
hardware, this will never happen.  However, dma_map_sg() can fail, and
we completely fail to check its return value.  So, fix this properly.

Arrange the code to map the scatterlist early, so we know how many
scatter table entries to allocate, and then fill them in.  This allows
us to keep relatively simple error cleanup paths.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Ensure that we clean up allocations and DMA mappings after encountering
an error rather than just giving up and leaking memory and resources.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Since the extended descriptor includes the hardware descriptor, and the
sec4 scatterlist immediately follows this, we can declare it as a array
at the very end of the extended descriptor.  This allows us to get rid
of an initialiser for every site where we allocate an extended
descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Mark the hardware descriptor as being cache line aligned; on DMA
incoherent architectures, the hardware descriptor should sit in a
separate cache line from the CPU accessed data to avoid polluting
the caches.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rather than giving the descriptor as hw_desc[0], give it's real size.
All places where we allocate an ahash_edesc incorporate DESC_JOB_IO_LEN
bytes of job descriptor.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

caamhash contains this weird code:

	src_nents = sg_count(req->src, req->nbytes);
	dma_map_sg(jrdev, req->src, src_nents ? : 1, DMA_TO_DEVICE);
	...
	edesc->src_nents = src_nents;

sg_count() returns zero when sg_nents_for_len() returns zero or one.
This means we don't need to use a hardware scatterlist.  However,
setting src_nents to zero causes problems when we unmap:

	if (edesc->src_nents)
		dma_unmap_sg_chained(dev, req->src, edesc->src_nents,
				     DMA_TO_DEVICE, edesc->chained);

as zero here means that we have no entries to unmap.  This causes us
to leak DMA mappings, where we map one scatterlist entry and then
fail to unmap it.

This can be fixed in two ways: either by writing the number of entries
that were requested of dma_map_sg(), or by reworking the "no SG
required" case.

We adopt the re-work solution here - we replace sg_count() with
sg_nents_for_len(), so src_nents now contains the real number of
scatterlist entries, and we then change the test for using the
hardware scatterlist to src_nents > 1 rather than just non-zero.

This change passes my sshd, openssl tests hashing /bin and tcrypt
tests.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Properly allocate enough memory to respect the fallback.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the probe function only emits an output on success
when debug is specifically enabled. It would be more useful
if this happens by default.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently the img-hash accelerator does not probe
successfully due to a change in the checks made during
registration with the crypto framework. This is due to
import and export functions not being defined. Correct
this.
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Current img hash claims sys and periph gate clocks
and this can be gated in system suspend scenarios.

Add support for Device pm ops for img hash to gate
the clocks claimed by img hash.
Signed-off-by: Govindraj Raja <Govindraj.Raja@imgtec.com>
Reviewed-by: Will Thomas <will.thomas@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Burst length of 16 drives the hash accelerator out of spec
and causes stability issues in some cases. Reduce this to
stop data being lost.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move 0 length buffer to end of structure to stop overwriting
fallback request data. This doesn't cause a bug itself as the
buffer is never used alongside the fallback but should be
changed.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Sporadic null pointer exceptions came from here. Fix them.
Signed-off-by: Will Thomas <will.thomas@imgtec.com>
Reviewed-by: James Hartley <james.hartley@imgtec.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

"if (!ret == template[i].fail)" is confusing to compilers (gcc5):

crypto/testmgr.c: In function '__test_aead':
crypto/testmgr.c:531:12: warning: logical not is only applied to the
left hand side of comparison [-Wlogical-not-parentheses]
   if (!ret == template[i].fail) {
            ^

Let there be 'if (template[i].fail == !ret) '.
Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

A second CCP is available, identical to the first, with
its ownn PCI ID. Make it available for use by the crypto
subsystem, as well as for DMA activity and random
number generation.

This device is not pre-configured at at boot time. The
driver must configure it (during the probe) for use.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Every CCP is capable of providing general DMA services.
Register the device as a provider.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Enable equivalent function on a v5 CCP. Add support for a
version 5 CCP which enables AES/XTS/SHA services. Also,
more work on the data structures to virtualize
functionality.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Available queue space is used to decide (by counting free slots)
if we have to put a command on hold or if it can be sent
to the engine immediately.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Make the RNG support code common (where possible) in
preparation for adding a v5 device.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Move the KSB access/management functions to the v3
device file, and add function pointers to the actions
structure. At the operations layer all of the references
to the storage block will be generic (virtual). This is
in preparation for a version 5 device, in which the
private storage block is managed differently.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Form and use of the local storage block in the CCP is
particular to the device version. Much of the code that
accesses the storage block can treat it as a virtual
resource, and will under go some renaming. Device-specific
access to the memory will be moved into device file.
Service functions will be added to the actions
structure.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use more concise field names; "perform_" is too verbose.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Device-specific values for the BAR and offset should be found
in the version data structure.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Adhere to the cryptodev comment convention.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>