Fix TKIP MIC verification failure when receiving QoS frames from AP.
Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This reduces codesize.
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Make all Orinoco PCI drivers (orinoco_pci, orinoco_plx, orinoco_tmd and
orinoco_nortel) as similar as possible.  Use the best implementation of
error handling, the best error messages, the best comments.

Put common code to orinoco_pci.h.  For now, it's suspend and resume
functions and function for registering the network device.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Copy PCI suspend/resume functions from orinoco_pci.c.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This is needed to identify the card before possible allocation problems,
so that the user at least can report the firmware version that fails.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

After several days of operation of Netgear MA311 card, the card becomes
to seek improperly and needs reset. This patch tries to reset the card
when this situation occurs.

Mar  9 06:45:16 berkeley kernel: wlan0: Error -5 writing packet to BAP
Mar  9 06:45:16 berkeley kernel: hermes @ f992a000: BAP0 offset error: reg=0x4044 id=0x128 offset=0x44
Mar  9 06:45:16 berkeley kernel: wlan0: Error -5 writing packet to BAP
Mar  9 06:45:16 berkeley kernel: hermes @ f992a000: BAP0 offset error: reg=0x4044 id=0x128 offset=0x44
(etc.)

A more detailed description of the problem can be found at
https://bugzilla.novell.com/show_bug.cgi?id=154773
The same problem with different card is reported at
http://sourceforge.net/mailarchive/message.php?msg_id=14597046Signed-off-by: Jiri Benc <jbenc@suse.cz>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Use skb_pull() to strip the addresses from the original packet.  Don't
strip protocol bytes.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The result of orinoco_xmit() can be OK, dropped packet and busy
transmitter.  Rename labels accordingly.  Increment stats->tx_errors in
one place.  Increment stats->tx_dropped - nobody is doing it for us.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

hermes_bap_pwrite() supports odd-sized packets now.   There is no
minimal packet size for 802.11.  Also, hermes_bap_pwrite() supports
odd-sized packets now.  This removes all reasons to pad the Tx data.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The new function can write an odd number of bytes, thus making padding
unnecessary.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Don't ever return -errno from orinoco_xmit() - the network layer doesn't
expect it.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When processing Tx exception, only read data until addr1.  Rename
hermes_tx_descriptor_802_11 to hermes_txexc_data since it's only used to
Tx exceptions.  Reuse existing hermes_tx_descriptor structure.  Remove
fields after addr1 - they are not read from the card.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Sparse is much better at finding endianess issues than such visual cues.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The PCMCIA drivers would never be loaded if the CIS were wrong.
No other PCMCIA drivers validate CIS.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes PIO mode on the softmac bcm43xx
driver. (A dscape patch will follow).
It mainly fixes endianess issues.
This patch is tested on PowerPC32 and i386.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

There are some bugs in the current implementation of the SIOCSIWAP wext,
for example that when you do it twice and it fails, it may still try
another access point for some reason. This patch fixes this by introducing
a new flag that tells the association code that the bssid that is in use
was fixed by the user and shouldn't be deviated from.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The original code was doing arithmetics on a little-endian value.
Reported by Stelios Koroneos <stelios@stelioscellar.com>
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  [PARISC] MAINTAINERS
  [PARISC] Make ioremap default to _nocache
  [PARISC] Add new entries to the syscall table
  [PARISC] Further work for multiple page sizes
  [PARISC] Fix up hil_kbd.c mismerge
  [PARISC] defconfig updates
  [PARISC] Document that we tolerate "Relaxed Ordering"
  [PARISC] Misc. janitorial work
  [PARISC] EISA regions must be mapped NO_CACHE
  [PARISC] OSS ad1889: Match register names with ALSA driver

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6:
  [PATCH] pcmcia/pcmcia_resource.c: fix crash when using Cardbus cards
  [PATCH] vrc4171: update config
  [PATCH] pcmcia: fix oops in static mapping case
  [PATCH] pcmcia: remove unneeded forward declarations
  [PATCH] pcmcia: do not set dev_node to NULL too early
  [PATCH] pcmcia: fix comment for pcmcia_load_firmware
  [PATCH] pcmcia: unload second device first
  [PATCH] pcmcia: add new ID to pcnet_cs

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm: possible cleanups
  drm: fixup r300 scratch on BE machines

* master.kernel.org:/pub/scm/linux/kernel/git/sfrench/cifs-2.6-stable:
  [CIFS] Fix typo in previous
  [CIFS] Readdir fixes to allow search to start at arbitrary position
  [CIFS] Use the kthread_ API instead of opencoding lots of hairy code for kernel
  [CIFS] Don't allow a backslash in a path component
  [CIFS] [CIFS] Do not take rename sem on most path based calls (during

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-merge:
  powerpc: Fix define_machine so machine_is() works from modules
  powerpc/ppc: export strncasecmp
  [PATCH] powerpc: fix oops in alsa powermac driver
  [PATCH] powerpc: update {g5,iseries,pseries}_defconfigs
  [PATCH] ppc: Fix powersave code on arch/ppc
  [PATCH] powerpc/cell: remove BUILD_BUG_ON and add sys_tee to spu_syscall_table
  [PATCH] powermac: Fix i2c on keywest based chips
  [PATCH] powerpc: Lower threshold for DART enablement to 1GB
  [PATCH] powerpc: IOMMU support for honoring dma_mask

This patch contains the following possible cleanups:
- make the following needlessly global function static:
 - drm_bufs.c: drm_addbufs_fb()
- remove the following unused EXPORT_SYMBOL's:
 - drm_agpsupport.c: drm_agp_bind_memory
 - drm_bufs.c: drm_rmmap_locked
 - drm_bufs.c: drm_rmmap
 - drm_stub.c: drm_get_dev
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Airlie <airlied@linux.ie>

This fixes the r300 scratch stuff to work on PPC,
from Ben Herrenschmidt on IRC.
Signed-off-by: Dave Airlie <airlied@linux.ie>

Signed-off-by: Steve French <sfrench@us.ibm.com>

machine_is() was always returning 0 when used in a module, because
we weren't exporting the machine definitions.  This was why sound
wasn't working on powermacs when CONFIG_SND_POWERMAC=m.  Original
fix from Ben Herrenschmidt, further fixed by me.
Signed-off-by: Paul Mackerras <paulus@samba.org>

I recently found that not all BIOS manufacturers are using the specified
generic PNP id in their TPM ACPI table entry.  I have added the vendor
specific IDs that I know about and added a module parameter that a user can
specify another HID to the probe list if their device isn't being found by the
default list.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds a boolean module parameter that allows the user to turn
interrupt support on and off.  The default behavior is to attempt to use
interrupts.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixes minor spacing issues.
Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Use __devexit_p() for the exit/remove function to protect against
discarding it.

WARNING: drivers/char/tpm/tpm_infineon.o - Section mismatch: reference to .exit.text:tpm_inf_pnp_remove from .data between 'tpm_inf_pnp' (at offset 0x20) and 'tpm_inf'
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The acpi table which contains the BIOS log events was updated for 1.2.
There are now client and server modes as defined in the specifications with
slightly different formats.  Additionally, the start field was even too
small for the 1.1 version but had been working anyway.  This patch updates
the code to deal with any of the three types of headers probperly (1.1, 1.2
client and 1.2 server).
Signed-off-by: Kylie Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>