- 20 Oct, 2010 40 commits
-
-
Jongpill Lee authored
This patch adds suspend-to-ram support for S5PV210. Note. This patch is confirmed on SMDKV210 and SMDKC110 board. Signed-off-by:
Jongpill Lee <boyko.lee@samsung.com> Signed-off-by:
Sangbeom Kim <sbkim73@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com>
-
Sangbeom Kim authored
This patch fixes build error by S3C2410 PM Suspend debug option due to undefined address. Signed-off-by:
-
Marek Szyprowski authored
Samsung S5P SoCs have the same interrupt type defines for both external interrupts and gpio interrupts. This patch removes all duplicates from S5PC100 and S5PV210 specific includes as well as gpio interrupt code and put a common defines to plat/irqs.h NOTE: Do not use this for S5P6440 and S5P6450. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> [kgene.kim@samsung.com: add note for S5P64X0] Signed-off-by:
-
Joonyoung Shim authored
This patch adds a common callback for gpio_to_irq() for external and gpio interrupts for Samsung SoCs. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
This patch moves external interrupt definitions from mach/gpio.h to mach/regs-gpio.h for consistency with S5PV210. Signed-off-by:
-
Joonyoung Shim authored
S5PC100 SoC can use common S5P GPIO interrupt code. This patch removes specific S5PC100 gpio interrupts code and adds required defines and code to make use of common S5P code. Signed-off-by:
-
Marek Szyprowski authored
S5PV210/S5PC110 can use common S5P GPIO interrupt code. This patch adds required defines and code to make use of it. Signed-off-by:
-
Marek Szyprowski authored
This patch adds common code to enable support of GPIO interrupt on S5P SoCs. The total number of GPIO pins is quite large on S5P SoCs. Registering irq support for all of them would be a resource waste. Because of that the interrupt support for standard GPIO pins is registered dynamically by the s5p_register_gpio_interrupt() function. Signed-off-by:
-
Marek Szyprowski authored
Add the necessary definitions and mapping information to enable the s3c-hsotg gadget to build. Signed-off-by:
-
Marek Szyprowski authored
Add required platform definitions for MMC power regulators on Samsung Goni board. GPIO pin GONI_EXT_FLASH_EN has been transferred from machine startup code to fixed voltage regulator. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Marek Szyprowski authored
Add required platform definitions for s3c-hsotg driver to enable usb gadget support on Samsung Goni board. Signed-off-by:
-
Marek Szyprowski authored
Since commit 67a38950f0917aecfe1a3e46720d8bbb0020 there is no need to set pixel clock for the s3c-fb driver's window information. The correct pixel clock value can be automatically calculated from the other screen parameters. This patch removes the redundant pixel clock parameter. Signed-off-by:
-
Marek Szyprowski authored
Change the default upper_margin and vsync_len to get rid of repeated last line on the display. Signed-off-by:
-
Thomas Abraham authored
All the S5P series SoCs use the 'struct clksrc_clk' type to represent the armclk. So the clk_arm clock instance available in the plat-s5p clock code is not used in any of the S5P series SoCs. This patch removes the unused clk_arm instance from plat-s5p clock code. Reported-by:
Jaecheol Lee <jc.lee@samsung.com> Signed-off-by:
Thomas Abraham <thomas.ab@samsung.com> Signed-off-by:
-
Kukjin Kim authored
This patch removes redundant selection PLAT_S5P in the CPU_S5P64XX config. Because PLAT_S5P is selected if select ARCH_S5P64XX in the plat-s5p/Kconfig. Signed-off-by: -
Kyungmin Park authored
The selection PLAT_S5P is selected with plat-s5p/Kconfig. So remove it form each CPU_S5PXXXX config. Signed-off-by:
-
Kyungmin Park authored
In case of S5PV310/S5PC210, it uses the SPARSEMEM as default memory configuration. So moved to ARCH_S5PV310 config. Signed-off-by:
-
Kyungmin Park authored
In case of S5PV210/S5PC110, it uses the SPARSEMEM as default memory configuration. So moved to ARCH_S5PV210 config. Signed-off-by:
-
Kyuho Choi authored
This patch adds to support Torbreck board of aESOP community using Samsung S5PV210 SoC. Signed-off-by:
Kyuho Choi <chlrbgh0@gmail.com> Signed-off-by:
Hyunchul Ko <ghcstop@gmail.com> Signed-off-by:
-
Boojin Kim authored
The physical address of SYSCON(System Controller) is wrong. This patch fixs this wrong physical address value from 0x10020000 to 0x10010000. Signed-off-by:
Boojin Kim <boojin.kim@samsung.com> Signed-off-by:
-
Changhwan Youn authored
It is reported by Junseok Jung that using clz instruction is better instead of using for-loop to find the interrupt source. This patch modifies interrupt source searching code using __ffs(). The __ffs() is implemented using clz instruction. Suggested-by:
Junseok Jung <jundols.jung@samsung.com> Signed-off-by:
Changhwan Youn <chaos.youn@samsung.com> Signed-off-by:
-
Jemings Ko authored
This patch adds support Watchdog Timer for S5PV310 and S5PC210. Signed-off-by:
Jemings Ko <jemings@samsung.com> Signed-off-by:
-
Changhwan Youn authored
This patch adds support RTC for S5PV310 and S5PC210. Signed-off-by:
-
Jaecheol Lee authored
This patch adds DMC(DRAM Memory Controller) map_desc table. Because some driver such as CPUFREQ need to access DMC register. Signed-off-by:
-
Joonyoung Shim authored
This patch is to support keypad device to the GONI board. Signed-off-by:
-
Jaecheol Lee authored
This patch fixes source clocks of moutcore. That should be clk_mout_apll instead of clk_sclk_apll. Signed-off-by:
-
Kukjin Kim authored
This patch changes the 3rd HSMMC interrupt name for compatibility from IRQ_MMC to IRQ_HSMMC3. Signed-off-by: -
Jongpill Lee authored
This patch adds various special clocks for S5PV310/S5PC210. Signed-off-by:
-
Jongpill Lee authored
This patch adds video clocks for S5PV310/S5PC210. Signed-off-by:
-
Jongpill Lee authored
This patch adds various clocks for S5PV310/S5PC210. Signed-off-by:
-
Jongpill Lee authored
This patch adds SDMMC clocks for S5PV310/S5PC210. Signed-off-by:
-
Jongpill Lee authored
This patch adds enable and ctrlbit for struct clksrc_clk clk_vpllsrc Signed-off-by:
-
Jongpill Lee authored
This patch adds log messages of aclk_200, aclk_100, aclk_160, and aclk_133. And adds clk_p.rate from calculated aclk_100. Signed-off-by:
-
Jongpill Lee authored
This patch adds struct clk clk_sclk_usbphy0, _usbphy1, and _hdmiphy for adding member of clkset_group_list. Signed-off-by:
-
Kukjin Kim authored
This patch adds 'clkset_aclk' to use commonly. And removed struct clksrc_sources clkset_aclk_200, clkset_aclk_100, clkset_aclk_160, and clkset_aclk_133. Signed-off-by: -
Kukjin Kim authored
This pach removed unused clock on S5PV310/S5PC210. Signed-off-by: -
Kukjin Kim authored
This patch adds definition of clock address. Signed-off-by: -
Changhwan Youn authored
This patch adds CPU hotplug support for S5PV310/S5PC210. Signed-off-by:
-
Kyungmin Park authored
Universal board has 5 GPIO keys. Signed-off-by:
-
Kukjin Kim authored
This patch updates Kconfig of mach-s5pv310 for easily dividing S5PC210 and S5PV310 boards. S5PC210(MCP) machines and S5PV310 machines can be build into one kernel, this will be provied/submitted when new defconfig can be merged. Signed-off-by:
-
