- 02 Jul, 2020 1 commit
-
-
Sagi Grimberg authored
Commit 59c7c3ca intended to only silently ignore non retry-able errors (DNR bit set) such that we can still identify misbehaving controllers, and in the other hand propagate retry-able errors (DNR bit cleared) so we don't wrongly abandon a namespace just because it happens to be temporarily inaccessible. The goal remains the same as the original commit where this was introduced but unfortunately had the logic backwards. Fixes: 59c7c3ca ("nvme: fix possible hang when ns scanning fails during error recovery") Reported-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Christoph Hellwig <hch@lst.de>
-
- 01 Jul, 2020 1 commit
-
-
Hou Tao authored
Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 29 Jun, 2020 2 commits
-
-
Eric Biggers authored
Make blk_ksm_destroy() use the kvfree_sensitive() function (which was introduced in v5.8-rc1) instead of open-coding it. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Hou Tao authored
Else there may be magic numbers in /sys/kernel/debug/block/*/state. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
- 25 Jun, 2020 1 commit
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph. * 'nvme-5.8' of git://git.infradead.org/nvme: nvme-multipath: fix bogus request queue reference put nvme-multipath: fix deadlock due to head->lock nvme: don't protect ns mutation with ns->head->lock nvme-multipath: fix deadlock between ana_work and scan_work nvme: fix possible deadlock when I/O is blocked nvme-rdma: assign completion vector correctly nvme-loop: initialize tagset numa value to the value of the ctrl nvme-tcp: initialize tagset numa value to the value of the ctrl nvme-pci: initialize tagset numa value to the value of the ctrl nvme-pci: override the value of the controller's numa node nvme: set initial value for controller's numa node
-
- 24 Jun, 2020 12 commits
-
-
Sagi Grimberg authored
The mpath disk node takes a reference on the request mpath request queue when adding live path to the mpath gendisk. However if we connected to an inaccessible path device_add_disk is not called, so if we disconnect and remove the mpath gendisk we endup putting an reference on the request queue that was never taken [1]. Fix that to check if we ever added a live path (using NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue reference. [1]: ------------[ cut here ]------------ refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0 CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:refcount_warn_saturate+0xa6/0xf0 RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007 RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980 RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0 FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: disk_release+0xa2/0xc0 device_release+0x28/0x80 kobject_put+0xa5/0x1b0 nvme_put_ns_head+0x26/0x70 [nvme_core] nvme_put_ns+0x30/0x60 [nvme_core] nvme_remove_namespaces+0x9b/0xe0 [nvme_core] nvme_do_delete_ctrl+0x43/0x5c [nvme_core] nvme_sysfs_delete.cold+0x8/0xd [nvme_core] kernfs_fop_write+0xc1/0x1a0 vfs_write+0xb6/0x1a0 ksys_write+0x5f/0xe0 do_syscall_64+0x52/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by:
Anton Eidelman <anton@lightbitslabs.com> Tested-by:
-
Anton Eidelman authored
In the following scenario scan_work and ana_work will deadlock: When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on ANY ctrl will not be able to complete nvme_mpath_set_live() on the same ns->head, which is required in order to update the new accessible path and remove NVME_NS_ANA_PENDING.. Therefore IO never completes: deadlock [1]. Fix: Move device_add_disk out of the head->lock and protect it with an atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit. [1]: kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:2 D 0 160 2 0x80004000 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core] kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_read_ana_log+0x76/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u8:4 D 0 439 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x256/0x390 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f ("nvme: add ANA support") Signed-off-by:
-
Sagi Grimberg authored
Right now ns->head->lock is protecting namespace mutation which is wrong and unneeded. Move it to only protect against head mutations. While we're at it, remove unnecessary ns->head reference as we already have head pointer. The problem with this is that the head->lock spans mpath disk node I/O that may block under some conditions (if for example the controller is disconnecting or the path became inaccessible), The locking scheme does not allow any other path to enable itself, preventing blocked I/O to complete and forward-progress from there. This is a preparation patch for the fix in a subsequent patch where the disk I/O will also be done outside the head->lock. Fixes: 0d0b660f ("nvme: add ANA support") Signed-off-by:
-
Anton Eidelman authored
When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. In order to recover and complete the IO ana_work on the same ctrl should be able to update the path state and remove NVME_NS_ANA_PENDING. The deadlock occurs because scan_work keeps holding ana_lock, so ana_work hangs [1]. Fix: Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy of the ANA group desc, and then calls nvme_update_ns_ana_state() without holding ana_lock. [1]: kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? select_task_rq_fair+0x1aa/0x5c0 kernel: ? kvm_sched_clock_read+0x11/0x20 kernel: ? sched_clock+0x9/0x10 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f ("nvme: add ANA support") Signed-off-by:
-
Sagi Grimberg authored
Revert fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") When adding a new namespace to the head disk (via nvme_mpath_set_live) we will see partition scan which triggers I/O on the mpath device node. This process will usually be triggered from the scan_work which holds the scan_lock. If I/O blocks (if we got ana change currently have only available paths but none are accessible) this can deadlock on the head disk bd_mutex as both partition scan I/O takes it, and head disk revalidation takes it to check for resize (also triggered from scan_work on a different path). See trace [1]. The mpath disk revalidation was originally added to detect online disk size change, but this is no longer needed since commit cb224c3a ("nvme: Convert to use set_capacity_revalidate_and_notify") which already updates resize info without unnecessarily revalidating the disk (the mpath disk doesn't even implement .revalidate_disk fop). [1]: -- kernel: INFO: task kworker/u65:9:494 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:9 D 0 494 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: revalidate_disk+0x63/0xa0 kernel: __nvme_revalidate_disk+0xfe/0x110 [nvme_core] kernel: nvme_revalidate_disk+0xa4/0x160 [nvme_core] kernel: ? evict+0x14c/0x1b0 kernel: revalidate_disk+0x2b/0xa0 kernel: nvme_validate_ns+0x49/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: ? __nvme_submit_sync_cmd+0xbe/0x1e0 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 ... kernel: INFO: task kworker/u65:1:2630 blocked for more than 241 seconds. kernel: Tainted: G OE 5.3.5-050305-generic #201910071830 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: kworker/u65:1 D 0 2630 2 0x80004000 kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? file_fdatawait_range+0x30/0x30 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: ? kmem_cache_alloc_trace+0x19c/0x230 kernel: efi_partition+0x1e6/0x708 kernel: ? vsnprintf+0x39e/0x4e0 kernel: ? snprintf+0x49/0x60 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: ? nvme_update_ns_ana_state+0x60/0x60 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: ? blk_mq_free_request+0xd2/0x100 kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x1f/0x40 -- Fixes: fab7772b ("nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns") Signed-off-by:
-
Max Gurtovoy authored
The completion vector index that is given during CQ creation can't exceed the number of support vectors by the underlying RDMA device. This violation currently can accure, for example, in case one will try to connect with N regular read/write queues and M poll queues and the sum of N + M > num_supported_vectors. This will lead to failure in establish a connection to remote target. Instead, in that case, share a completion vector between queues. Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Max Gurtovoy authored
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by:
-
Max Gurtovoy authored
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by:
-
Max Gurtovoy authored
Both admin's and drive's tagsets should be set according the numa node of the controller. Signed-off-by:
-
Max Gurtovoy authored
Set the node value according to the PCI device numa node. Signed-off-by:
-
Max Gurtovoy authored
Initialize the node to NUMA_NO_NODE value. Transports that are aware of numa node affinity can override it (e.g. RDMA transport set the affinity according to the RDMA HCA). Signed-off-by:
-
Chengguang Xu authored
Release bip using kfree() in error path when that was allocated by kmalloc(). Signed-off-by:
Chengguang Xu <cgxu519@mykernel.net> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
- 18 Jun, 2020 4 commits
-
-
Zheng Bin authored
kill_bdev does not have any external user, so make it static. Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
-
Zheng Bin authored
When a filesystem is mounted on a loop device and on a loop ioctl LOOP_SET_STATUS64, because of kill_bdev, buffer_head mappings are getting destroyed. kill_bdev truncate_inode_pages truncate_inode_pages_range do_invalidatepage block_invalidatepage discard_buffer -->clear BH_Mapped flag sb_bread __bread_gfp bh = __getblk_gfp -->discard_buffer clear BH_Mapped flag __bread_slow submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) --> hit this BUG_ON Fixes: 5db470e2 ("loop: drop caches if offset or block_size are changed") Signed-off-by: -
Andy Shevchenko authored
There is a specific API to treat raw data as UUID, i.e. import_uuid(). Use it instead of uuid_copy() with explicit casting. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Weiping Zhang authored
There is an issue when tune the number for read and write queues, if the total queue count was not changed. The hctx->type cannot be updated, since __blk_mq_update_nr_hw_queues will return directly if the total queue count has not been changed. Reproduce: dmesg | grep "default/read/poll" [ 2.607459] nvme nvme0: 48/0/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default tune the write queues to 24: echo 24 > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dmesg | grep "default/read/poll" [ 433.547235] nvme nvme0: 24/24/0 default/read/poll queues cat /sys/kernel/debug/block/nvme0n1/hctx*/type | sort | uniq -c 48 default The driver's hardware queue mapping is not same as block layer. Signed-off-by:Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by:
-
- 17 Jun, 2020 2 commits
-
-
Jan Kara authored
Mostly for historical reasons, q->blk_trace is assigned through xchg() and cmpxchg() atomic operations. Although this is correct, sparse complains about this because it violates rcu annotations since commit c780e86d ("blktrace: Protect q->blk_trace with RCU") which started to use rcu for accessing q->blk_trace. Furthermore there's no real need for atomic operations anymore since all changes to q->blk_trace happen under q->blk_trace_mutex and since it also makes more sense to check if q->blk_trace is set with the mutex held earlier. So let's just replace xchg() with rcu_replace_pointer() and cmpxchg() with explicit check and rcu_assign_pointer(). This makes the code more efficient and sparse happy. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Luis Chamberlain authored
We use one blktrace per request_queue, that means one per the entire disk. So we cannot run one blktrace on say /dev/vda and then /dev/vda1, or just two calls on /dev/vda. We check for concurrent setup only at the very end of the blktrace setup though. If we try to run two concurrent blktraces on the same block device the second one will fail, and the first one seems to go on. However when one tries to kill the first one one will see things like this: The kernel will show these: ``` debugfs: File 'dropped' in directory 'nvme1n1' already present! debugfs: File 'msg' in directory 'nvme1n1' already present! debugfs: File 'trace0' in directory 'nvme1n1' already present! `` And userspace just sees this error message for the second call: ``` blktrace /dev/nvme1n1 BLKTRACESETUP(2) /dev/nvme1n1 failed: 5/Input/output error ``` The first userspace process #1 will also claim that the files were taken underneath their nose as well. The files are taken away form the first process given that when the second blktrace fails, it will follow up with a BLKTRACESTOP and BLKTRACETEARDOWN. This means that even if go-happy process #1 is waiting for blktrace data, we *have* been asked to take teardown the blktrace. This can easily be reproduced with break-blktrace [0] run_0005.sh test. Just break out early if we know we're already going to fail, this will prevent trying to create the files all over again, which we know still exist. [0] https://github.com/mcgrof/break-blktraceSigned-off-by:
Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
- 16 Jun, 2020 1 commit
-
-
Jason Yan authored
In blkdev_get() we call __blkdev_get() to do some internal jobs and if there is some errors in __blkdev_get(), the bdput() is called which means we have released the refcount of the bdev (actually the refcount of the bdev inode). This means we cannot access bdev after that point. But acctually bdev is still accessed in blkdev_get() after calling __blkdev_get(). This results in use-after-free if the refcount is the last one we released in __blkdev_get(). Let's take a look at the following scenerio: CPU0 CPU1 CPU2 blkdev_open blkdev_open Remove disk bd_acquire blkdev_get __blkdev_get del_gendisk bdev_unhash_inode bd_acquire bdev_get_gendisk bd_forget failed because of unhashed bdput bdput (the last one) bdev_evict_inode access bdev => use after free [ 459.350216] BUG: KASAN: use-after-free in __lock_acquire+0x24c1/0x31b0 [ 459.351190] Read of size 8 at addr ffff88806c815a80 by task syz-executor.0/20132 [ 459.352347] [ 459.352594] CPU: 0 PID: 20132 Comm: syz-executor.0 Not tainted 4.19.90 #2 [ 459.353628] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 459.354947] Call Trace: [ 459.355337] dump_stack+0x111/0x19e [ 459.355879] ? __lock_acquire+0x24c1/0x31b0 [ 459.356523] print_address_description+0x60/0x223 [ 459.357248] ? __lock_acquire+0x24c1/0x31b0 [ 459.357887] kasan_report.cold+0xae/0x2d8 [ 459.358503] __lock_acquire+0x24c1/0x31b0 [ 459.359120] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.359784] ? lockdep_hardirqs_on+0x37b/0x580 [ 459.360465] ? _raw_spin_unlock_irq+0x24/0x40 [ 459.361123] ? finish_task_switch+0x125/0x600 [ 459.361812] ? finish_task_switch+0xee/0x600 [ 459.362471] ? mark_held_locks+0xf0/0xf0 [ 459.363108] ? __schedule+0x96f/0x21d0 [ 459.363716] lock_acquire+0x111/0x320 [ 459.364285] ? blkdev_get+0xce/0xbe0 [ 459.364846] ? blkdev_get+0xce/0xbe0 [ 459.365390] __mutex_lock+0xf9/0x12a0 [ 459.365948] ? blkdev_get+0xce/0xbe0 [ 459.366493] ? bdev_evict_inode+0x1f0/0x1f0 [ 459.367130] ? blkdev_get+0xce/0xbe0 [ 459.367678] ? destroy_inode+0xbc/0x110 [ 459.368261] ? mutex_trylock+0x1a0/0x1a0 [ 459.368867] ? __blkdev_get+0x3e6/0x1280 [ 459.369463] ? bdev_disk_changed+0x1d0/0x1d0 [ 459.370114] ? blkdev_get+0xce/0xbe0 [ 459.370656] blkdev_get+0xce/0xbe0 [ 459.371178] ? find_held_lock+0x2c/0x110 [ 459.371774] ? __blkdev_get+0x1280/0x1280 [ 459.372383] ? lock_downgrade+0x680/0x680 [ 459.373002] ? lock_acquire+0x111/0x320 [ 459.373587] ? bd_acquire+0x21/0x2c0 [ 459.374134] ? do_raw_spin_unlock+0x4f/0x250 [ 459.374780] blkdev_open+0x202/0x290 [ 459.375325] do_dentry_open+0x49e/0x1050 [ 459.375924] ? blkdev_get_by_dev+0x70/0x70 [ 459.376543] ? __x64_sys_fchdir+0x1f0/0x1f0 [ 459.377192] ? inode_permission+0xbe/0x3a0 [ 459.377818] path_openat+0x148c/0x3f50 [ 459.378392] ? kmem_cache_alloc+0xd5/0x280 [ 459.379016] ? entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.379802] ? path_lookupat.isra.0+0x900/0x900 [ 459.380489] ? __lock_is_held+0xad/0x140 [ 459.381093] do_filp_open+0x1a1/0x280 [ 459.381654] ? may_open_dev+0xf0/0xf0 [ 459.382214] ? find_held_lock+0x2c/0x110 [ 459.382816] ? lock_downgrade+0x680/0x680 [ 459.383425] ? __lock_is_held+0xad/0x140 [ 459.384024] ? do_raw_spin_unlock+0x4f/0x250 [ 459.384668] ? _raw_spin_unlock+0x1f/0x30 [ 459.385280] ? __alloc_fd+0x448/0x560 [ 459.385841] do_sys_open+0x3c3/0x500 [ 459.386386] ? filp_open+0x70/0x70 [ 459.386911] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 459.387610] ? trace_hardirqs_off_caller+0x55/0x1c0 [ 459.388342] ? do_syscall_64+0x1a/0x520 [ 459.388930] do_syscall_64+0xc3/0x520 [ 459.389490] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.390248] RIP: 0033:0x416211 [ 459.390720] Code: 75 14 b8 02 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 04 19 00 00 c3 48 83 ec 08 e8 0a fa ff ff 48 89 04 24 b8 02 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 53 fa ff ff 48 89 d0 48 83 c4 08 48 3d 01 [ 459.393483] RSP: 002b:00007fe45dfe9a60 EFLAGS: 00000293 ORIG_RAX: 0000000000000002 [ 459.394610] RAX: ffffffffffffffda RBX: 00007fe45dfea6d4 RCX: 0000000000416211 [ 459.395678] RDX: 00007fe45dfe9b0a RSI: 0000000000000002 RDI: 00007fe45dfe9b00 [ 459.396758] RBP: 000000000076bf20 R08: 0000000000000000 R09: 000000000000000a [ 459.397930] R10: 0000000000000075 R11: 0000000000000293 R12: 00000000ffffffff [ 459.399022] R13: 0000000000000bd9 R14: 00000000004cdb80 R15: 000000000076bf2c [ 459.400168] [ 459.400430] Allocated by task 20132: [ 459.401038] kasan_kmalloc+0xbf/0xe0 [ 459.401652] kmem_cache_alloc+0xd5/0x280 [ 459.402330] bdev_alloc_inode+0x18/0x40 [ 459.402970] alloc_inode+0x5f/0x180 [ 459.403510] iget5_locked+0x57/0xd0 [ 459.404095] bdget+0x94/0x4e0 [ 459.404607] bd_acquire+0xfa/0x2c0 [ 459.405113] blkdev_open+0x110/0x290 [ 459.405702] do_dentry_open+0x49e/0x1050 [ 459.406340] path_openat+0x148c/0x3f50 [ 459.406926] do_filp_open+0x1a1/0x280 [ 459.407471] do_sys_open+0x3c3/0x500 [ 459.408010] do_syscall_64+0xc3/0x520 [ 459.408572] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 459.409415] [ 459.409679] Freed by task 1262: [ 459.410212] __kasan_slab_free+0x129/0x170 [ 459.410919] kmem_cache_free+0xb2/0x2a0 [ 459.411564] rcu_process_callbacks+0xbb2/0x2320 [ 459.412318] __do_softirq+0x225/0x8ac Fix this by delaying bdput() to the end of blkdev_get() which means we have finished accessing bdev. Fixes: 77ea887e ("implement in-kernel gendisk events handling") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 15 Jun, 2020 2 commits
-
-
Randy Dunlap authored
Fix kernel-doc warning: the parameter was removed, so also remove the kernel-doc notation for it. ../include/trace/events/block.h:278: warning: Excess function parameter 'error' description in 'trace_block_bio_complete' Fixes: d24de76a ("block: remove the error argument to the block_bio_complete tracepoint") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Baolin Wang authored
The blk_mq_all_tag_iter() is a void function, thus remove the redundant 'return' statement in this function. Signed-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by:
-
- 14 Jun, 2020 8 commits
-
-
Coly Li authored
scripts/checkpatch.pl reports following warning for patch ("bcache: check and adjust logical block size for backing devices"), WARNING: quoted string split across lines #146: FILE: drivers/md/bcache/super.c:896: + pr_info("%s: sb/logical block size (%u) greater than page size " + "(%lu) falling back to device logical block size (%u)", There are two things to fix up, - The kernel message print should be in a single line. - pr_info() won't automatically add new line since v5.8, a '\n' should be added. This patch just does the above cleanup in bcache_device_init(). Signed-off-by:Coly Li <colyli@suse.de> Signed-off-by:
-
Coly Li authored
This patch changes the asynchronous registration kworker to a delayed kworker. There is probability queue_work() queues the async registration kworker to the same CPU (even though very little), then the process which writing sysfs interface to reigster bcache device may won't return immeidately. queue_delayed_work() in this patch will delay 10 jiffies before insert the kworker to run queue, which makes sure the registering process may always returns to user space in time. Fixes: 9e23ccf8 ("bcache: asynchronous devices registration") Signed-off-by:
-
Mauricio Faria de Oliveira authored
It's possible for a block driver to set logical block size to a value greater than page size incorrectly; e.g. bcache takes the value from the superblock, set by the user w/ make-bcache. This causes a BUG/NULL pointer dereference in the path: __blkdev_get() -> set_init_blocksize() // set i_blkbits based on ... -> bdev_logical_block_size() -> queue_logical_block_size() // ... this value -> bdev_disk_changed() ... -> blkdev_readpage() -> block_read_full_page() -> create_page_buffers() // size = 1 << i_blkbits -> create_empty_buffers() // give size/take pointer -> alloc_page_buffers() // return NULL .. BUG! Because alloc_page_buffers() is called with size > PAGE_SIZE, thus it initializes head = NULL, skips the loop, return head; then create_empty_buffers() gets (and uses) the NULL pointer. This has been around longer than commit ad6bf88a ("block: fix an integer overflow in logical block size"); however, it increased the range of values that can trigger the issue. Previously only 8k/16k/32k (on x86/4k page size) would do it, as greater values overflow unsigned short to zero, and queue_ logical_block_size() would then use the default of 512. Now the range with unsigned int is much larger, and users w/ the 512k value, which happened to be zero'ed previously and work fine, started to hit this issue -- as the zero is gone, and queue_logical_block_size() does return 512k (>PAGE_SIZE.) Fix this by checking the bcache device's logical block size, and if it's greater than page size, fallback to the backing/ cached device's logical page size. This doesn't affect cache devices as those are still checked for block/page size in read_super(); only the backing/cached devices are not. Apparently it's a regression from commit 2903381f ("bcache: Take data offset from the bdev superblock."), moving the check into BCACHE_SB_VERSION_CDEV only. Now that we have superblocks of backing devices out there with this larger value, we cannot refuse to load them (i.e., have a similar check in _BDEV.) Ideally perhaps bcache should use all values from the backing device (physical/logical/io_min block size)? But for now just fix the problematic case. Test-case: # IMG=/root/disk.img # dd if=/dev/zero of=$IMG bs=1 count=0 seek=1G # DEV=$(losetup --find --show $IMG) # make-bcache --bdev $DEV --block 8k < see dmesg > Before: # uname -r 5.7.0-rc7 [ 55.944046] BUG: kernel NULL pointer dereference, address: 0000000000000000 ... [ 55.949742] CPU: 3 PID: 610 Comm: bcache-register Not tainted 5.7.0-rc7 #4 ... [ 55.952281] RIP: 0010:create_empty_buffers+0x1a/0x100 ... [ 55.966434] Call Trace: [ 55.967021] create_page_buffers+0x48/0x50 [ 55.967834] block_read_full_page+0x49/0x380 [ 55.972181] do_read_cache_page+0x494/0x610 [ 55.974780] read_part_sector+0x2d/0xaa [ 55.975558] read_lba+0x10e/0x1e0 [ 55.977904] efi_partition+0x120/0x5a6 [ 55.980227] blk_add_partitions+0x161/0x390 [ 55.982177] bdev_disk_changed+0x61/0xd0 [ 55.982961] __blkdev_get+0x350/0x490 [ 55.983715] __device_add_disk+0x318/0x480 [ 55.984539] bch_cached_dev_run+0xc5/0x270 [ 55.986010] register_bcache.cold+0x122/0x179 [ 55.987628] kernfs_fop_write+0xbc/0x1a0 [ 55.988416] vfs_write+0xb1/0x1a0 [ 55.989134] ksys_write+0x5a/0xd0 [ 55.989825] do_syscall_64+0x43/0x140 [ 55.990563] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 55.991519] RIP: 0033:0x7f7d60ba3154 ... After: # uname -r 5.7.0.bcachelbspgsz [ 31.672460] bcache: bcache_device_init() bcache0: sb/logical block size (8192) greater than page size (4096) falling back to device logical block size (512) [ 31.675133] bcache: register_bdev() registered backing device loop0 # grep ^ /sys/block/bcache0/queue/*_block_size /sys/block/bcache0/queue/logical_block_size:512 /sys/block/bcache0/queue/physical_block_size:8192 Reported-by:Ryan Finnie <ryan@finnie.org> Reported-by:
Sebastian Marsching <sebastian@marsching.com> Signed-off-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Signed-off-by:
-
Zhiqiang Liu authored
coccicheck reports: drivers/md//bcache/btree.c:1538:1-7: preceding lock on line 1417 In btree_gc_coalesce func, if the coalescing process fails, we will goto to out_nocoalesce tag directly without releasing new_nodes[i]->write_lock. Then, it will cause a deadlock when trying to acquire new_nodes[i]-> write_lock for freeing new_nodes[i] before return. btree_gc_coalesce func details as follows: if alloc new_nodes[i] fails: goto out_nocoalesce; // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock) // main coalescing process for (i = nodes - 1; i > 0; --i) [snipped] if coalescing process fails: // Here, directly goto out_nocoalesce // tag will cause a deadlock goto out_nocoalesce; [snipped] // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock) // coalesing succ, return return; out_nocoalesce: btree_node_free(new_nodes[i]) // free new_nodes[i] // obtain new_nodes[i]->write_lock mutex_lock(&new_nodes[i]->write_lock); // set flag for reuse clear_bit(BTREE_NODE_dirty, &ew_nodes[i]->flags); // release new_nodes[i]->write_lock mutex_unlock(&new_nodes[i]->write_lock); To fix the problem, we add a new tag 'out_unlock_nocoalesce' for releasing new_nodes[i]->write_lock before out_nocoalesce tag. If coalescing process fails, we will go to out_unlock_nocoalesce tag for releasing new_nodes[i]->write_lock before free new_nodes[i] in out_nocoalesce tag. (Coly Li helps to clean up commit log format.) Fixes: 2a285686 ("bcache: btree locking rework") Signed-off-by:
Zhiqiang Liu <liuzhiqiang26@huawei.com> Signed-off-by:
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by:
Thomas Cedeno <thomascedeno@google.com> Signed-off-by:
Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ... -
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by:
David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: -
Liao Pingfang authored
Looking into the context (atomic!) and the error message should be dropped. Signed-off-by:
Liao Pingfang <liao.pingfang@zte.com.cn> Signed-off-by:
-
