- 03 Dec, 2014 2 commits
-
-
Steven Rostedt (Red Hat) authored
Add support to allow not "!" for and (&&) and (||). That is: !(field1 == X && field2 == Y) Where the value of the full clause will be notted. Signed-off-by:Steven Rostedt <rostedt@goodmis.org>
-
Steven Rostedt (Red Hat) authored
Ted noticed that he could not filter on an event for a bit being cleared. That's because the filtering logic only tests event fields with a limited number of comparisons which, for bit logic, only include "&", which can test if a bit is set, but there's no good way to see if a bit is clear. This adds a way to do: !(field & 2048) Which returns true if the bit is not set, and false otherwise. Note, currently !(field1 == 10 && field2 == 15) is not supported. That is, the 'not' only works for direct comparisons, not for the AND and OR logic. Link: http://lkml.kernel.org/r/20141202021912.GA29096@thunk.org Link: http://lkml.kernel.org/r/20141202120430.71979060@gandalf.local.homeAcked-by:
Alexei Starovoitov <ast@plumgrid.com> Suggested-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
- 01 Dec, 2014 9 commits
-
-
Steven Rostedt (Red Hat) authored
The function graph helper function prepare_ftrace_return() which does the work to hijack the parent pointer has that parent pointer as its first parameter. Instead, if we make it the second parameter and have ip as the first parameter (self_addr), then it can use the %rdi from save_mcount_regs that loads it already. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
Move all the work from ftrace_caller_setup into save_mcount_regs. This simplifies the code and makes it easier to understand. Link: http://lkml.kernel.org/r/CA+55aFxUTUbdxpjVMW8X9c=o8sui7OB_MYPfcbJuDyfUWtNrNg@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
The save_mcount_regs macro saves and restores the required mcount regs that need to be saved before calling C code. It is done for all the function hook utilities (static tracing, dynamic tracing, regs, function graph). When frame pointers are enabled, the ftrace trampolines need to set up frames and pointers such that a back trace (dump stack) can continue passed them. Currently, a separate macro is used (create_frame) to do this, but it's only done for the ftrace_caller and ftrace_reg_caller functions. It is not done for the static tracer or function graph tracing. Instead of having a separate macro doing the recording of the frames, have the save_mcount_regs perform this task. This also has all tracers saving the frame pointers when needed. Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
The macro save_mcount_regs saves regs onto the stack. But to uncouple the amount of stack used in that macro from the users of the macro, we need to have a define that tells all the users how much stack is used by that macro. This way we can change the amount of stack the macro uses without breaking its users. Also remove some dead code that was left over from commit fdc841b5 "ftrace: x86: Remove check of obsolete variable function_trace_stop". Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
Currently save_mcount_regs is passed a "skip" parameter to know how much stack updated the pt_regs, as it tries to keep the saved pt_regs in the same location for all users. This is rather stupid, especially since the part stored on the pt_regs has nothing to do with what is suppose to be in that location. Instead of doing that, just pass in an "added" parameter that lets that macro know how much stack was added before it was called so that it can get to the RIP. But the difference is that it will now offset the pt_regs by that "added" count. The caller now needs to take care of the offset of the pt_regs. This will make it easier to simplify the code later. Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
Instead of having save_mcount_regs store the RIP in %rdx as a temp register to place it in the proper location of the pt_regs on the stack. Use the %rdi register as the temp register. This lets us remove the extra store in the ftrace_caller_setup macro. Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
The name MCOUNT_SAVE_FRAME is rather confusing as it really isn't a function frame that is saved, but just the required mcount registers that are needed to be saved before C code may be called. The word "frame" confuses it as being a function frame which it is not. Rename MCOUNT_SAVE_FRAME and MCOUNT_RESTORE_FRAME to save_mcount_regs and restore_mcount_regs respectively. Noticed the lower case, which keeps it from screaming at the reviewers. Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
Linus pointed out that MCOUNT_SAVE_FRAME is used in only a single file and that there's no reason that it should be in a header file. Move the macro to the code that uses it. Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
Steven Rostedt (Red Hat) authored
Linus pointed out that there were locations that did the hard coded update of the parent and rip parameters. One of them was the static tracer which could also use the ftrace_caller_setup to do that work. In fact, because it did not use it, it is prone to bugs, and since the static tracer is hardly ever used (who wants function tracing code always being called?) it doesn't get tested very often. I only run a few "does it still work" tests on it. But I do not run stress tests on that code. Although, since it is never turned off, just having it on should be stressful enough. (especially for the performance folks) There's no reason that the static tracer can't also use ftrace_caller_setup. Have it do so. Link: http://lkml.kernel.org/r/CA+55aFwF+qCGSKdGaEgW4p6N65GZ5_XTV=1NbtWDvxnd5yYLiw@mail.gmail.com Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1411262304010.3961@nanosReviewed-by:
-
- 24 Nov, 2014 1 commit
-
-
Steven Rostedt (Red Hat) authored
New updates to the ftrace generic code had ftrace_stub not always being called when ftrace is off. This causes the static tracer to always save and restore functions. But it also showed that when function tracing is running, the function graph tracer can not. We should always check to see if function graph tracing is running even if the function tracer is running too. The function tracer code is not the only one that uses the hook to function mcount. Cc: Markos Chandras <Markos.Chandras@imgtec.com> Signed-off-by:
-
- 21 Nov, 2014 2 commits
-
-
Masami Hiramatsu authored
Add FTRACE_OPS_FL_IPMODIFY flag to kprobe_ftrace_ops since kprobes can changes regs->ip. Link: http://lkml.kernel.org/r/20141121102523.11844.21298.stgit@localhost.localdomainSigned-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
-
Masami Hiramatsu authored
Introduce FTRACE_OPS_FL_IPMODIFY to avoid conflict among ftrace users who may modify regs->ip to change the execution path. If two or more users modify the regs->ip on the same function entry, one of them will be broken. So they must add IPMODIFY flag and make sure that ftrace_set_filter_ip() succeeds. Note that ftrace doesn't allow ftrace_ops which has IPMODIFY flag to have notrace hash, and the ftrace_ops must have a filter hash (so that the ftrace_ops can hook only specific entries), because it strongly depends on the address and must be allowed for only few selected functions. Link: http://lkml.kernel.org/r/20141121102516.11844.27829.stgit@localhost.localdomain Cc: Jiri Kosina <jkosina@suse.cz> Cc: Seth Jennings <sjenning@redhat.com> Cc: Petr Mladek <pmladek@suse.cz> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Ingo Molnar <mingo@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
- 20 Nov, 2014 2 commits
-
-
Masami Hiramatsu authored
Recover original IP register if the pre_handler doesn't change it. Since current kprobes doesn't expect that another ftrace handler may change regs->ip, it sets kprobe.addr + MCOUNT_INSN_SIZE to regs->ip and returns to ftrace. This seems wrong behavior since kprobes can recover regs->ip and safely pass it to another handler. This adds code which recovers original regs->ip passed from ftrace right before returning to ftrace, so that another ftrace user can change regs->ip. Link: http://lkml.kernel.org/r/20141009130106.4698.26362.stgit@kbuild-f20.novalocalSigned-off-by:
-
Steven Rostedt (Red Hat) authored
Fix up a few typos in comments and convert an int into a bool in update_traceon_count(). Link: http://lkml.kernel.org/r/546DD445.5080108@hitachi.comSuggested-by:
-
- 19 Nov, 2014 19 commits
-
-
Markus Elfring authored
The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Link: http://lkml.kernel.org/r/5468F875.7080907@users.sourceforge.netSigned-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
If the trace_seq of ftrace_raw_output_prep() is full this function returns TRACE_TYPE_PARTIAL_LINE, otherwise it returns zero. The problem is that TRACE_TYPE_PARTIAL_LINE happens to be zero! The thing is, the caller of ftrace_raw_output_prep() expects a success to be zero. Change that to expect it to be TRACE_TYPE_HANDLED. Link: http://lkml.kernel.org/r/20141114112522.GA2988@dhcp128.suse.czReminded-by:
Petr Mladek <pmladek@suse.cz> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.orgSigned-off-by:
-
Steven Rostedt (Red Hat) authored
The functions trace_seq_printf() and friends will not be returning values soon and will be void functions. To know if they succeeded or not, the functions trace_seq_has_overflowed() and trace_handle_return() should be used instead. Reviewed-by:
-
Steven Rostedt (Red Hat) authored
The functions trace_seq_printf() and friends will soon no longer have return values. Using trace_seq_has_overflowed() and trace_handle_return() should be used instead. Link: http://lkml.kernel.org/r/20141114011411.693008134@goodmis.org Link: http://lkml.kernel.org/r/20141115050602.333705855@goodmis.orgReviewed-by:
Masami Hiramatsu <masami.hiramatu.pt@hitachi.com> Acked-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
The functions trace_seq_printf() and friends will soon not have a return value and will only be a void function. Use trace_seq_has_overflowed() instead to know if the trace_seq operations succeeded or not. Link: http://lkml.kernel.org/r/20141114011411.530216306@goodmis.orgReviewed-by:
-
Steven Rostedt (Red Hat) authored
The return values for trace_seq_printf() and friends are going to be removed and they will become void functions. The mmio tracer checked their return and even did so incorrectly. Some of the funtions which returned the values were never checked themselves. Removing all the checks simplifies the code. Use trace_seq_has_overflowed() and trace_handle_return() where necessary instead. Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Instead of checking the return value of trace_seq_printf() and friends for overflowing of the buffer, use the trace_seq_has_overflowed() helper function. This cleans up the code quite a bit and also takes us a step closer to changing the return values of trace_seq_printf() and friends to void. Link: http://lkml.kernel.org/r/20141114011411.181812785@goodmis.orgReviewed-by:
-
Steven Rostedt (Red Hat) authored
Instead of doing individual checks all over the place that makes the code very messy. Just check trace_seq_has_overflowed() at the end or in strategic places. This makes the code much cleaner and also helps with getting closer to removing the return values of trace_seq_printf() and friends. Link: http://lkml.kernel.org/r/20141114011410.987913836@goodmis.orgReviewed-by:
-
Steven Rostedt (Red Hat) authored
The branch tracer should not be checking the trace_seq_printf() return value as that will soon be void. There's a new trace_handle_return() helper function that will return TRACE_TYPE_PARTIAL_LINE if the trace_seq overflowed and TRACE_TYPE_HANDLED otherwise. Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Remove checking the return value of all trace_seq_puts(). It was wrong anyway as only the last return value mattered. But as the trace_seq_puts() is going to be a void function in the future, we should not be checking the return value of it anyway. Just return !trace_seq_has_overflowed() instead. Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Checking the return code of every trace_seq_printf() operation and having to return early if it overflowed makes the code messy. Using the new trace_seq_has_overflowed() and trace_handle_return() functions allows us to clean up the code. In the future, trace_seq_printf() and friends will be turning into void functions and not returning a value. The trace_seq_has_overflowed() is to be used instead. This cleanup allows that change to take place. Cc: Jens Axboe <axboe@fb.com> Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Adding a trace_seq_has_overflowed() which returns true if the trace_seq had too much written into it allows us to simplify the code. Instead of checking the return value of every call to trace_seq_printf() and friends, they can all be called normally, and at the end we can return !trace_seq_has_overflowed() instead. Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function was created called trace_handle_return() which takes a trace_seq and returns these enums. Using this helper function also simplifies the code. This change also makes it possible to remove the return values of trace_seq_printf() and friends. They should instead just be void functions. Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.orgReviewed-by:
-
Steven Rostedt (Red Hat) authored
In trace_seq_bitmask() it calls bitmap_scnprintf() not from the current position of the trace_seq buffer (s->buffer + s->len), but instead from the beginning of the buffer (s->buffer). Luckily, the only user of this "ipi_raise tracepoint" uses it as the first parameter, and as such, the start of the temp buffer in include/trace/ftrace.h (see __get_bitmask()). Reported-by:
-
Steven Rostedt (Red Hat) authored
Use the helper function trace_seq_buffer_ptr() to get the current location of the next buffer write of a trace_seq object, instead of open coding it. This facilitates the conversion of trace_seq to use seq_buf. Tested-by:
Jiri Kosina <jkosina@suse.cz> Acked-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Steven Rostedt (Red Hat) authored
To allow for the restructiong of the trace_seq code, we need users of it to use the helper functions instead of accessing the internals of the trace_seq structure itself. Link: http://lkml.kernel.org/r/20141104160221.585025609@goodmis.orgTested-by:
Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Mark Rustad <mark.d.rustad@intel.com> Reviewed-by:
-
Steven Rostedt (Red Hat) authored
Stack traces that happen from function tracing check if the address on the stack is a __kernel_text_address(). That is, is the address kernel code. This calls core_kernel_text() which returns true if the address is part of the builtin kernel code. It also calls is_module_text_address() which returns true if the address belongs to module code. But what is missing is ftrace dynamically allocated trampolines. These trampolines are allocated for individual ftrace_ops that call the ftrace_ops callback functions directly. But if they do a stack trace, the code checking the stack wont detect them as they are neither core kernel code nor module address space. Adding another field to ftrace_ops that also stores the size of the trampoline assigned to it we can create a new function called is_ftrace_trampoline() that returns true if the address is a dynamically allocate ftrace trampoline. Note, it ignores trampolines that are not dynamically allocated as they will return true with the core_kernel_text() function. Link: http://lkml.kernel.org/r/20141119034829.497125839@goodmis.org Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by:
-
Steven Rostedt (Red Hat) authored
When CONFIG_FRAME_POINTERS are enabled, it is required that the ftrace_caller and ftrace_regs_caller trampolines set up frame pointers otherwise a stack trace from a function call wont print the functions that called the trampoline. This is due to a check in __save_stack_address(): #ifdef CONFIG_FRAME_POINTER if (!reliable) return; #endif The "reliable" variable is only set if the function address is equal to contents of the address before the address the frame pointer register points to. If the frame pointer is not set up for the ftrace caller then this will fail the reliable test. It will miss the function that called the trampoline. Worse yet, if fentry is used (gcc 4.6 and beyond), it will also miss the parent, as the fentry is called before the stack frame is set up. That means the bp frame pointer points to the stack of just before the parent function was called. Link: http://lkml.kernel.org/r/20141119034829.355440340@goodmis.org Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Cc: stable@vger.kernel.org # 3.7+ Acked-by:
-
Steven Rostedt (Red Hat) authored
The function probe counting for traceon and traceoff suffered a race condition where if the probe was executing on two or more CPUs at the same time, it could decrement the counter by more than one when disabling (or enabling) the tracer only once. The way the traceon and traceoff probes are suppose to work is that they disable (or enable) tracing once per count. If a user were to echo 'schedule:traceoff:3' into set_ftrace_filter, then when the schedule function was called, it would disable tracing. But the count should only be decremented once (to 2). Then if the user enabled tracing again (via tracing_on file), the next call to schedule would disable tracing again and the count would be decremented to 1. But if multiple CPUS called schedule at the same time, it is possible that the count would be decremented more than once because of the simple "count--" used. By reading the count into a local variable and using memory barriers we can guarantee that the count would only be decremented once per disable (or enable). The stack trace probe had a similar race, but here the stack trace will decrement for each time it is called. But this had the read-modify- write race, where it could stack trace more than the number of times that was specified. This case we use a cmpxchg to stack trace only the number of times specified. The dump probes can still use the old "update_count()" function as they only run once, and that is controlled by the dump logic itself. Link: http://lkml.kernel.org/r/20141118134643.4b550ee4@gandalf.local.homeSigned-off-by:
-
- 14 Nov, 2014 5 commits
-
-
Byungchul Park authored
Usually, "msecs" notation means milli-seconds, and "usecs" notation means micro-seconds. Since the unit used in the code is micro-seconds, the notation should be replaced from msecs to usecs. Link: http://lkml.kernel.org/r/1415171926-9782-2-git-send-email-byungchul.park@lge.comSigned-off-by:
Byungchul Park <byungchul.park@lge.com> Signed-off-by:
-
Daniel Bristot de Oliveira authored
On the function_graph tracer, the print_graph_irq() function prints a trace line with the flag ==========> on an irq handler entry, and the flag <========== on an irq handler return. But when the latency-format is enable, it is not printing the latency-format flags, causing the following error in the trace output: 0) ==========> | 0) d... | smp_apic_timer_interrupt() { This patch fixes this issue by printing the latency-format flags when it is enable. Link: http://lkml.kernel.org/r/7c2e226dac20c940b6242178fab7f0e3c9b5ce58.1415233316.git.bristot@redhat.comReviewed-by:Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Rasmus Villemoes authored
Printing a single character to a seqfile might as well be done with seq_putc instead of seq_puts; this avoids a strlen() call and a memory access. It also shaves another few bytes off the generated code. Link: http://lkml.kernel.org/r/1415479332-25944-4-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Rasmus Villemoes authored
Consecutive seq_puts calls with literal strings can be merged to a single call. This reduces the size of the generated code, and can also lead to slight .rodata reduction (because of fewer nul and padding bytes). It should also shave a off a few clock cycles. Link: http://lkml.kernel.org/r/1415479332-25944-3-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Using seq_printf to print a simple string or a single character is a lot more expensive than it needs to be, since seq_puts and seq_putc exist. These patches do seq_printf(m, s) -> seq_puts(m, s) seq_printf(m, "%s", s) -> seq_puts(m, s) seq_printf(m, "%c", c) -> seq_putc(m, c) Subsequent patches will simplify further. Link: http://lkml.kernel.org/r/1415479332-25944-2-git-send-email-linux@rasmusvillemoes.dkSigned-off-by:
-
