- 05 Jun, 2020 2 commits
-
-
Boris Brezillon authored
Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Ron Minnich <rminnich@google.com> Tested-by:
Richard Weinberger <richard@nod.at>
-
Jason Yan authored
It's not used by anyone now, remove it. Fix the following gcc warning: drivers/mtd/maps/physmap-gemini.c:49:34: warning: ‘syscon_match’ defined but not used [-Wunused-const-variable=] static const struct of_device_id syscon_match[] = { ^~~~~~~~~~~~ Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 03 Jun, 2020 1 commit
-
-
Richard Weinberger authored
CFI changes: * Support the absence of protection registers for Intel CFI flashes * Replace zero-length array with flexible-arrays
-
- 01 Jun, 2020 2 commits
-
-
Richard Weinberger authored
Merge tag 'spi-nor/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next SPI NOR core changes: - add, update support and fix few flashes - prepare BFPT parsing for JESD216 rev D - kernel doc fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxRichard Weinberger authored
Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).
-
- 31 May, 2020 35 commits
-
-
Linus Torvalds authored
-
Joe Perches authored
Yes, staying withing 80 columns is certainly still _preferred_. But it's not the hard limit that the checkpatch warnings imply, and other concerns can most certainly dominate. Increase the default limit to 100 characters. Not because 100 characters is some hard limit either, but that's certainly a "what are you doing" kind of value and less likely to be about the occasional slightly longer lines. Miscellanea: - to avoid unnecessary whitespace changes in files, checkpatch will no longer emit a warning about line length when scanning files unless --strict is also used - Add a bit to coding-style about alignment to open parenthesis Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A pile of x86 fixes: - Prevent a memory leak in ioperm which was caused by the stupid assumption that the exit cleanup is always called for current, which is not the case when fork fails after taking a reference on the ioperm bitmap. - Fix an arithmething overflow in the DMA code on 32bit systems - Fill gaps in the xstate copy with defaults instead of leaving them uninitialized - Revert: "Make __X32_SYSCALL_BIT be unsigned long" as it turned out that existing user space fails to build" * tag 'x86-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ioperm: Prevent a memory leak when fork fails x86/dma: Fix max PFN arithmetic overflow on 32 bit systems copy_xstate_to_kernel(): don't leave parts of destination uninitialized x86/syscalls: Revert "x86/syscalls: Make __X32_SYSCALL_BIT be unsigned long" -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix preventing a crash in NUMA balancing. The current->mm check is not reliable as the mm might be temporary due to use_mm() in a kthread. Check for PF_KTHREAD explictly" * tag 'sched-urgent-2020-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Don't NUMA balance for kthreads
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: "Another week, another set of bug fixes: 1) Fix pskb_pull length in __xfrm_transport_prep(), from Xin Long. 2) Fix double xfrm_state put in esp{4,6}_gro_receive(), also from Xin Long. 3) Re-arm discovery timer properly in mac80211 mesh code, from Linus Lüssing. 4) Prevent buffer overflows in nf_conntrack_pptp debug code, from Pablo Neira Ayuso. 5) Fix race in ktls code between tls_sw_recvmsg() and tls_decrypt_done(), from Vinay Kumar Yadav. 6) Fix crashes on TCP fallback in MPTCP code, from Paolo Abeni. 7) More validation is necessary of untrusted GSO packets coming from virtualization devices, from Willem de Bruijn. 8) Fix endianness of bnxt_en firmware message length accesses, from Edwin Peer. 9) Fix infinite loop in sch_fq_pie, from Davide Caratti. 10) Fix lockdep splat in DSA by setting lockless TX in netdev features for slave ports, from Vladimir Oltean. 11) Fix suspend/resume crashes in mlx5, from Mark Bloch. 12) Fix use after free in bpf fmod_ret, from Alexei Starovoitov. 13) ARP retransmit timer guard uses wrong offset, from Hongbin Liu. 14) Fix leak in inetdev_init(), from Yang Yingliang. 15) Don't try to use inet hash and unhash in l2tp code, results in crashes. From Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits) l2tp: add sk_family checks to l2tp_validate_socket l2tp: do not use inet_hash()/inet_unhash() net: qrtr: Allocate workqueue before kernel_bind mptcp: remove msk from the token container at destruction time. mptcp: fix race between MP_JOIN and close mptcp: fix unblocking connect() net/sched: act_ct: add nat mangle action only for NAT-conntrack devinet: fix memleak in inetdev_init() virtio_vsock: Fix race condition in virtio_transport_recv_pkt drivers/net/ibmvnic: Update VNIC protocol version reporting NFC: st21nfca: add missed kfree_skb() in an error path neigh: fix ARP retransmit timer guard bpf, selftests: Add a verifier test for assigning 32bit reg states to 64bit ones bpf, selftests: Verifier bounds tests need to be updated bpf: Fix a verifier issue when assigning 32bit reg states to 64bit ones bpf: Fix use-after-free in fmod_ret check net/mlx5e: replace EINVAL in mlx5e_flower_parse_meta() net/mlx5e: Fix MLX5_TC_CT dependencies net/mlx5e: Properly set default values when disabling adaptive moderation net/mlx5e: Fix arch depending casting issue in FEC ... -
Miquel Raynal authored
NAND ECC modes (or providers) have their own enumeration but, unlike their algorithms counterpart, there is no invalid or uninitialized value to discriminate between an error and having chosen a no-ECC situation. Add an "invalid" entry for this purpose. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
-
Miquel Raynal authored
There is an enumeration to list ECC algorithm, let's use it instead of returning an int. Signed-off-by:
-
Miquel Raynal authored
This scheme has been introduced for the Davinci controller and means that the OOB area must be read *before* the rest of the data. This has nothing to do with the ECC in OOB placement as it could be understood and most importantly, there is no point in having this function out of the Davinci NAND controller driver. A DT property for this scheme has been added but never used, even by the Davinci driver which only uses this scheme to change the default nand_read_page(). Move the main read_page() helper into the Davinci driver and remove the remaining boilerplate. Signed-off-by:
-
Miquel Raynal authored
In new code, the use of typedef is discouraged. Turn this one in the raw NAND core into a regular enumeration. Signed-off-by:
-
Miquel Raynal authored
Fix a probable copy/paste error: the function works like mtd_ooblayout_set_bytes(), not *_get_bytes(). Signed-off-by:
-
Miquel Raynal authored
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Now that all drivers have been converted to do not use nand_release() anymore, let's remove this helper. Signed-off-by:
-
Miquel Raynal authored
Reorganize ns_cleanup_module() to fit the reworked exit path of ns_init_module(). There is no need for a ns_free_lists() function anymore, so drop it. Signed-off-by:
-
Miquel Raynal authored
Rename the "error" label to gave it a meaning. Signed-off-by:
-
Miquel Raynal authored
Lists are filled with calls to ns_parse_weakblocks(), ns_parse_weakpages() and ns_parse_gravepages(). Handle them in the error path, all at the same time. Signed-off-by:
-
Miquel Raynal authored
Drop the generic err_exit. The remaining operation to do from this goto statement is to cleanup the NAND allocations, so rename it. Signed-off-by:
-
Miquel Raynal authored
Free erase_block_wear on error, which is allocated by ns_setup_wear_reporting(). Signed-off-by:
-
Miquel Raynal authored
Cosmetic change to give a meaning to all labels in this complicated error path. Signed-off-by:
-
Miquel Raynal authored
nand_release() basically calls mtd_device_unregister() and nand_cleanup(). Both helpers should be called after MTD device registration and NAND scan, respectively. Drop nand_release() and use the two helpers directly so that they fit the error path and the labels there. Signed-off-by:
-
Miquel Raynal authored
ns_free() is the helper that is called symmetrically to ns_init() and so should free the same objects, including the partition names. Now, callers of ns_free() do not need to free this partition names themselves. Signed-off-by:
-
Miquel Raynal authored
The nandsim device is allocated and initialized inside ns_init() by a call to ns_alloc_device(), free it on error. Signed-off-by:
-
Miquel Raynal authored
The ns_init() function shall free the partition names allocated by ns_get_partition_name() on error. Signed-off-by:
-
Miquel Raynal authored
The ns_alloc_device() helper has actually two distinct path. Handle errors in both of them. Signed-off-by:
-
Miquel Raynal authored
Create a ns_debugfs_remove() helper for that and call it in ns_cleanup_module(). Signed-off-by:
-
Miquel Raynal authored
Debugfs entries should be removed in the error path, so first, keep track of them. Signed-off-by:
-
Miquel Raynal authored
Many function calls are done this way: if ((retval = func()) != 0) return retval; while we expect in the kernel function calls like: retval = func(); if (retval) return retval; Apply this change where possible and also use "ret" instead of "retval" in ns_init_module for consistency, as it is only used in this function. Signed-off-by: -
Miquel Raynal authored
Some functions are prefixed "nandsim_", others "ns_" and many are simply not prefixed at all. Make this file consistent by prefixing all functions by "ns_". This is a mechanical change. Sometimes the line is a bit reworked as well to fit the kernel coding style. For instance, there are several places where displayed strings are cut. When one of this line is changed because of the naming update, the two parts of the strings gets concatenated. Signed-off-by:
-
Miquel Raynal authored
Symbolic permissions 'S_IRUSR' are not preferred. Checkpatch.pl advises to use octal permissions '0400'. Signed-off-by:
-
Miquel Raynal authored
The nandsim object is called 'ns' almost everywhere, keep it that way everywhere for consistency. Signed-off-by:
-
Álvaro Fernández Rojas authored
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Álvaro Fernández Rojas authored
Add brcm,brcmnand-v2.1 and brcm,brcmnand-v2.2 as possible compatible strings to support brcmnand controllers v2.1 and v2.2. Signed-off-by:
-
Álvaro Fernández Rojas authored
Current pages sizes apply to controllers after v3.4 Signed-off-by:
-
Álvaro Fernández Rojas authored
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17c ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by:
-
Álvaro Fernández Rojas authored
These registers are also used on v3.3. Signed-off-by:
-
Miquel Raynal authored
Drop the use of gpmi_copy_bits() in favor of the NAND helper nand_extract_bits(). Signed-off-by:
-
Dinghao Liu authored
pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by:
-
