- 07 Jan, 2009 40 commits
-
-
Andrew Patterson authored
The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the PCIe AER driver. Signed-off-by:
Andrew Patterson <andrew.patterson@hp.com> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org>
-
Andrew Patterson authored
The _OSC capabilities OSC_ACTIVE_STATE_PWR_SUPPORT and OSC_CLOCK_PWR_CAPABILITY_SUPPORT are set when the root bridge is added with pci_acpi_osc_support(), so we no longer need to do it in the ASPM driver. Also add the function pcie_aspm_enabled, which returns true if pcie_aspm=off is not on the kernel command-line. Signed-off-by:
-
Andrew Patterson authored
The _OSC capability OSC_EXT_PCI_CONFIG_SUPPORT is set when the root bridge is added with pci_acpi_osc_support() if we can access PCI extended config space. This adds the function pci_ext_cfg_avail which returns true if we can access PCI extended config space (offset greater than 0xff). It currently only returns false if arch=x86 and raw_pci_ext_ops is not set (which might happen if pci=nommcfg is set on the kernel command-line). Signed-off-by:
-
Andrew Patterson authored
Add pci_acpi_osc_support() and call it when a PCI bridge is added. This allows us to avoid having every individual PCI root bridge driver call _OSC support for every root bridge in their probe functions, a significant savings in boot time. Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Signed-off-by:
-
Andrew Patterson authored
The pci-acpi.h file will not compile without including linux/acpi.h. Signed-off-by:
-
Benjamin Herrenschmidt authored
Currently, only PHBs get the legacy_* files, which makes it tricky for userland to get access to the legacy space. This commit exposes them in every bus, since even child buses may forward legacy cycles if configured properly. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Sheng Yang authored
Some PCI devices implement PCI Advanced Features, which means they support Function Level Reset(FLR). Implement support for that in pci_reset_function. Signed-off-by:
Sheng Yang <sheng@linux.intel.com> Signed-off-by:
-
Sheng Yang authored
PCI Advanced Features Capability is introduced by "Conventional PCI Advanced Caps ECN" (can be downloaded in pcisig.com). Add defines for the various AF capabilities, including function level reset (FLR). Reviewed-by:
-
Sheng Yang authored
Separate out function level reset so that pci_reset_function can be more easily extended. Signed-off-by:
-
Kay Sievers authored
This patch is part of a larger patch series which will remove the "char bus_id[20]" name string from struct device. The device name is managed in the kobject anyway, and without any size limitation, and just needlessly copied into "struct device". To set and read the device name dev_name(dev) and dev_set_name(dev) must be used. If your code uses static kobjects, which it shouldn't do, "const char *init_name" can be used to statically provide the name the registered device should have. At registration time, the init_name field is cleared, to enforce the use of dev_name(dev) to access the device name at a later time. We need to get rid of all occurrences of bus_id in the entire tree to be able to enable the new interface. Please apply this patch, and possibly convert any remaining remaining occurrences of bus_id. Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-Off-By:
Kay Sievers <kay.sievers@vrfy.org> Signed-off-by:
-
Jesse Barnes authored
Had a space before tab in do_fixups, prototype wasn't wrapped properly either. Signed-off-by: -
Kenji Kaneshige authored
The pciehp driver waits for 1000 msec after turning power off to make sure the power has been completely removed. But this 1000 msec wait is not needed if a slot doesn't implement power control because software cannot control the power. Power will be automatically removed at adapter removal time on such a slot Tested-by:
"Phil Endecott" <phil_pibbu_endecott@chezphil.org> Signed-off-by:
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by:
-
Jesse Barnes authored
/proc/bus/pci allows you to mmap resource ranges too, so we should probably be checking to make sure the mapping is somewhat valid. Uses the same code as the recent sysfs mmap range checking patch from Linus. Acked-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
Linus Torvalds authored
The __SWAB_64_THRU_32__ case of a 64-bit byte swap was depending on the no-longer-existant ___swab32() method (three underscores). We got rid of some of the worst indirection and complexity, and now it should just use the 32-bit swab function that was defined right above it. Reported-and-tested-by:
Nicolas Pitre <nico@cam.org> Reported-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Harvey Harrison authored
This implementation caused problems in userspace which can, and does define _both_ __LITTLE_ENDIAN and __BIG_ENDIAN. Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
Signed-off-by:
-
Harvey Harrison authored
The first step to make swab.h a regular header that will include an asm/swab.h with arch overrides. Avoid the gratuitous differences introduced in the new linux/swab.h by naming the ___constant_swabXX bits and __fswabXX bits exactly as found in the old implementation in byteorder/swab[b].h Use this new swab.h in byteorder/[big|little]_endian.h and remove the two old swab headers. Although the inclusion of asm/byteorder.h looks strange in linux/swab.h, this will allow each arch to move the actual arch overrides for the swab bits in an asm file and then the includes can be cleaned up without requiring a flag day for all arches at once. Keep providing __fswabXX in case some userspace was using them directly, but the revised __swabXX should be used instead in any new code and will always do constant folding not dependent on the optimization level, which means the __constant versions can be phased out in-kernel. Arches that use the old-style arch macros will lose their optimized versions until they move to the new style, but at least they will still compile. Many arches have already moved and the patches to move the remaining arches are trivial. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6Linus Torvalds authored
* 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: fix ordering of driver unload vs agp unload. drm/i915: Respect the other stolen memory sizes we know of. drm/i915: Non-mobile parts don't have integrated TV-out. drm/i915: Add support for integrated HDMI on G4X hardware. drm/i915: Pin cursor bo and unpin old bo when setting cursor. drm/i915: Don't allow objects to get bound while VT switched.
-
Dave Airlie authored
For KMS drivers, we really need to cleanup the driver before disabling the AGP subsystem. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
Eric Anholt authored
fd.o bug #19336. Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Dave Airlie <airlied@linux.ie>
-
Eric Anholt authored
Signed-off-by:
-
Eric Anholt authored
This is ported directly from the userland 2D driver code. The HDMI audio bits aren't hooked up yet. Signed-off-by:
-
Kristian Høgsberg authored
We also didn't track the cursor bo before and would leak a reference when the cursor image was change. Signed-off-by:
Kristian Høgsberg <krh@redhat.com> Signed-off-by:
-
Eric Anholt authored
This avoids a BUG_ON in the enter_vt path due to objects being in the GTT when we shouldn't have ever let them be (as we're not supposed to touch the device during that time). This was triggered by a change in the 2D driver to use the GTT mapping of objects after pinning them to improve software fallback performance. Signed-off-by:
-
