These allocations are not freed upon release.
When on it; go for managed resources instead.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[kvalo: fix two checkpatch warnings]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The pointer ndev is being dereferenced before it is being null checked,
hence there is a potential null pointer deference. Fix this by only
dereferencing ndev after it has been null checked

Detected by CoverityScan, CID#1467010 ("Dereference before null check")

Fixes: e00243fa ("wil6210: infrastructure for multiple virtual interfaces")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The way that 'strncat' is used here raised a warning in gcc-8:

drivers/net/wireless/ath/ath10k/wmi.c: In function 'ath10k_wmi_tpc_stats_final_disp_tables':
drivers/net/wireless/ath/ath10k/wmi.c:4649:4: error: 'strncat' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation]

Effectively, this is simply a strcat() but the use of strncat() suggests
some form of overflow check. Regardless of whether this might actually
overflow, using strlcat() instead of strncat() avoids the warning and
makes the code more robust.

Fixes: bc64d052 ("ath10k: debugfs support to get final TPC stats for 10.4 variants")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Remove the static array and use the generic routine to set the
Ethernet broadcast address.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Currently vdev stats displayed in fw_stats are applicable
only for TLV based firmware and fix it for 10.4 firmware
as of now. The vdev stats in 10.4 firmware is split into two
parts (vdev_stats, vdev_stats_extended). The actual stats
are captured only in extended vdev stats. In order to enable
vdev stats, appropriate feature bit will be set on extended
resource config. As FTM related counters are available only on
newer 10.4 based firmware, these counters will be displayed
only on valid data.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The commit "cfg80211: make RATE_INFO_BW_20 the default" changed
the index of RATE_INFO_BW_20, but the updates to ath10k missed
the special bandwidth calculation case in
ath10k_update_per_peer_tx_stats().

This will fix below warning,

 WARNING: CPU: 0 PID: 609 at net/wireless/util.c:1254
 cfg80211_calculate_bitrate+0x174/0x220
 invalid rate bw=1, mcs=9, nss=2

 (unwind_backtrace) from
 (cfg80211_calculate_bitrate+0x174/0x220)
 (cfg80211_calculate_bitrate) from
 (nl80211_put_sta_rate+0x44/0x1dc)from
 (nl80211_put_sta_rate) from
 (nl80211_send_station+0x388/0xaf0)
 (nl80211_get_station+0xa8/0xec)
 [ end trace da8257d6a850e91a ]

Fixes: 842be75c ("cfg80211: make RATE_INFO_BW_20 the default")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This patch fixes regression caused by 0c317a02
("cfg80211: support virtual interfaces with different beacon intervals"),
with this change cfg80211 expects the driver to advertize
'beacon_int_min_gcd' to support different beacon intervals in multivap
scenario. This support is added for, QCA988X/QCA99X0/QCA9984/QCA4019.

Verifed AP + mesh bring up on QCA9984 with beacon interval 100msec and
1000msec respectively.
Frimware: firmware-5.bin_10.4-3.5.3-00053

Fixes: 0c317a02 ("cfg80211: support virtual interfaces with different beacon intervals")
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

For WPA encryption, QCA6174 firmware(version: WLAN.RM.4.4) will unblock
data when M4 was sent successfully. For other encryption which didn't need
4-way handshake firmware will unblock the data when peer authorized. Since
TDLS is 3-way handshake host need send authorize cmd to firmware to unblock
data.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

TDLS peer do not need WEP key. Setting WEP key will lead
to TDLS setup failure. Add fix to avoid setting WEP key
for TDLS peer.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Enable TDLS peer inactivity detetion feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS link inactivity detecting.
Set related parameters in TDLS WMI command to enable this feature.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Enable TDLS peer buffer STA feature.
QCA6174 firmware(version: WLAN.RM.4.4) support TDLS peer buffer STA,
it reports this capability through wmi service map in wmi service ready
event. Set related parameter in TDLS WMI command to enable this feature.
Signed-off-by: Yingying Tang <yintang@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

In case wcn36xx_smd_rsp_process() is called more than once before
hal_ind_work was dispatched, the messages will end up in hal_ind_queue,
but wcn36xx_ind_smd_work() will only look at the first message in that
list.

Fix this by dequeing the messages from the list in a loop, and only stop
when it's empty.

This issue was found during a review of the driver. In my tests, that
race never actually occured.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

wcn36xx_start_tx function retrieves the buffer descriptor from the
channel control queue to start filling tx buffer information. However,
nothing prevents this same buffer to be concurrently accessed in a
concurent tx call, leading to potential buffer coruption and firmware
crash (observed during iperf test). The channel control queue should
only be accessed and updated with the channel lock.

Fix this issue by using a local buffer descriptor which will be copied
in the thread-safe wcn36xx_dxe_tx_frame.

Note that buffer descriptor size is few bytes so the introduced copy
overhead is insignificant. Moreover, this allows to keep the locked
section minimal.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

It appears that the WCN36xx firmware doesn't actually respond to
probe requests. Until it's resolved, switch the probe response
responsibility to the 802.11 layer to allow creation of
hidden SSID AP's.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

QCA9984/QCA99X0/QCA4019 chipsets have 8 memory regions, dump all of them to the
firmware coredump file. Some of the regions need to be read using ioread() so
add new region types for them.
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
[kvalo: refactoring etc]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

As QCA9984 needs two region types refactor the code to make it easier add the
new types. No functional changes.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

FW has Smart Logging feature enabled by default for detecting failures
and processing FATAL_CONDITION_EVENTID (36925 - 0x903D) back to host.

Since ath10k doesn't implement the Smart Logging and FATAL CONDITION
EVENT processing yet, suppressing the unknown event ID warning by moving
this under ATH10K_DBG_WMI.

Simulated the same issue by having associated STA powered off when
ping flood was running from AP backbone. This triggerd STA KICKOUT
in AP followed by FATAL CONDITION event 36925.

Issue was reproduced and verified in below DUT
------------------------------------------------
AP mode of OpenWRT QCA9984 running 6.0.8 with FW ver 10.4-3.5.3-00053
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Firmware WLAN.TF.2.1-00014-QCARMSWP-1 now supports reading the board ID
information and also required 9 IRAM bank, which older ath10k version
don't have the support will fail to be enabled, so in order to maintain
the backward compatibility, we need to update the FW API to 6.
Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The firmware of QCA6174/QCA9377 already support the feature, just enable
it to be able to handle the get_temperature command and process the event.

You can read the temperature by using the hwmon interface,

cat /sys/class/ieee80211/phy*/device/hwmon/hwmon2/temp1_input

Verified with the following hardware and software combination,
QCA6174, only firmware-4.bin doesn't support this, otherwise all support.
QCA9377, all the firmwares upstreamed support this command
Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This reverts commit 55884c04.

When Ath10k is in AP mode and an unassociated STA sends a VHT action frame
(Operating Mode Notification for the NSS change) periodically to AP this causes
ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during
NSS update. Over the time (with a certain client it can happen within 15 mins
when there are over 500 of these VHT action frames) continuous calls of
WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust.

To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS
updates and no need to call ath10k_station_assoc(). So revert the original
commit from 2014 as it's unclear why the change was really needed.
Now the firmware assert doesn't happen anymore.

Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053.
This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and
QCA988x platform with firmware version: 10.2.4-1.0-00036.

Firmware Assert log:

ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c)
ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386
ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344
ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0002:01:00.0: firmware register dump:
ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31
ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60
ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000
ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2
ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000
ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34
ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F
ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4
ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4
ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00
ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC
ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000
ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000
ath10k_pci 0002:01:00.0: Copy Engine register dump:
ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx:
ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3
ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213
ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21
ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25
ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104
ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156
ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12
ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1
ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0
ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1
ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0
ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f
ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather:
ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0
ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0
ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0
ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0
ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0
ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0
ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0
ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0
ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0
ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0
ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0
ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0
ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0
ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

some userspace programs (e.g. hostapd) need to set the regulatory domain
before selecting the operating channel. Synchronize DFS detector regardless of
the value of ah->curchan, to avoid situations where wireless scan can't be done
on some 5GHz sub-bands, because dfs_region is constantly UNSET.
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The use of stack Variable Length Arrays needs to be avoided, as they
can be a vector for stack exhaustion, which can be both a runtime bug
(kernel Oops) or a security flaw (overwriting memory beyond the
stack). Also, in general, as code evolves it is easy to lose track of
how big a VLA can get. Thus, we can end up having runtime failures
that are hard to debug. As part of the directive[1] to remove all VLAs
from the kernel, and build with -Wvla.

Currently rsi code uses a VLA based on a function argument to
`rsi_sdio_load_data_master_write()`.  The function call chain is

Both these functions

	rsi_sdio_reinit_device()
	rsi_probe()

start the call chain:

	rsi_hal_device_init()
	rsi_load_fw()
	auto_fw_upgrade()
	ping_pong_write()
	rsi_sdio_load_data_master_write()

[Without familiarity with the code] it appears that none of the 4 locks

	mutex
	rx_mutex
	tx_mutex
	tx_bus_mutex

are held when `rsi_sdio_load_data_master_write()` is called.  It is therefore
safe to use kmalloc with GFP_KERNEL.

We can avoid using the VLA by using `kmalloc()` and free'ing the memory on all
exit paths.

Change buffer from 'u8 array' to 'u8 *'.  Call `kmalloc()` to allocate memory for
the buffer.  Using goto statement to call `kfree()` on all return paths.

It can be expected that this patch will result in a small increase in overhead
due to the use of `kmalloc()` however this code is only called on initialization
(and re-initialization) so this overhead should not degrade performance.

[1] https://lkml.org/lkml/2018/3/7/621Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Fix the following sparse warning in mwifiex_cmd_append_11n_tlv:

drivers/net/wireless/marvell/mwifiex/11n.c:358:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:358:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:360:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:360:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:366:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:366:65:    right side has type int
drivers/net/wireless/marvell/mwifiex/11n.c:368:65: warning: invalid assignment: &=
drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    left side has type restricted __le16
drivers/net/wireless/marvell/mwifiex/11n.c:368:65:    right side has type int

Fixes: 77423fa7 ("mwifiex: fix incorrect ht capability problem")
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Prefer the direct use of octal for permissions.

Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace
and some typing.

Miscellanea:

o Whitespace neatening around these conversions.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The linkage between the bluetooth driver and the wireless
driver is not defined properly, leading to build problems
such as:

warning: (BT_HCIRSI) selects RSI_COEX which has unmet direct dependencies (NETDEVICES && WLAN && WLAN_VENDOR_RSI && BT_HCIRSI && RSI_91X)
drivers/net/wireless/rsi/rsi_91x_main.o: In function `rsi_read_pkt':
(.text+0x205): undefined reference to `rsi_bt_ops'

As the dependency is actually the reverse (RSI_91X uses
the BT_RSI driver, not the other way round), this changes
the dependency to match, and enables the bluetooth driver
from the RSI_COEX symbol.

Fixes: 38aa4da5 ("Bluetooth: btrsi: add new rsi bluetooth driver")
Acked-by; Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

ath.git patches for 4.17. Major changes:

wil6210

* support multiple virtual interfaces

IRQ reason was not cheked for errors.
Although error handing is not currently supported, it
will be nice to output an error value to the log if the
DMA operation failed.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

DXE channel defaults used hardcoded magic values.
Added bit definitions of the control register and
calculate this values in compilation for clarity.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

DXE descriptor control registers used hardcoded magic values.  Added bit
definitions of the control register and calculate this values in compilation
for clarity. No functional changes.
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Signed-off-by: Peter Große <pegro@friiks.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Fixes crash seen on arm smp systems (gateworks ventana imx6):

Unable to handle kernel NULL pointer dereference at virtual address 00000014
pgd = 80004000
[00000014] *pgd=00000000
Internal error: Oops - BUG: 17 [#1] PREEMPT SMP ARM
Modules linked in: ip6table_filter nf_conntrack_ipv6 ip6_tables nf_log_ipv6 nf_defrag_ipv6 shortcut_fe ipcomp6 xfrm_ipcomp xfrm6_tunnel xfrm6_mode_tunnel xfrm6_mode_transport xfrm6_mode_ro xfrm6_mode_beet ip6_tunnel tunnel6 mip6 ah6 esp6 xfrm_algo sit ip_tunnel tunnel4 ipv6 ath10k_pci ath10k_core ath9k ath mac80211 cfg80211 compat ath_pci ath_hal(P) caamalg authencesn authenc caamrng caamhash caam_jr caam cdc_ncm usbnet usbcore sky2 imx2_wdt
CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: P                4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
task: bf064980 task.stack: bf07c000
PC is at relay_buf_full+0xc/0x30
LR is at _674+0x740/0xf10 [ath9k]
pc : [<8018bce0>]    lr : [<7f1aa604>]    psr: 80000013
sp : bf07dbf0  ip : bf07dc00  fp : bf07dbfc
r10: 0000003f  r9 : bf130e00  r8 : 809044b0
r7 : 00000000  r6 : be67a9f0  r5 : 00000000  r4 : 809043e4
r3 : c0864c24  r2 : 00000000  r1 : 00000004  r0 : 00000000
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 10c5387d  Table: 4e6a004a  DAC: 00000055
Process ksoftirqd/0 (pid: 3, stack limit = 0xbf07c210)
Stack: (0xbf07dbf0 to 0xbf07e000)
dbe0:                                     bf07dd04 bf07dc00 7f1aa604 8018bce0
dc00: 00004014 be59e010 bf07dc34 bf07dc18 7f1a7084 7f19c07c be59c010 be6470a0
dc20: 0000096c be648954 bf07dc6c bf07dc38 7f1c286c bf07dd90 bf07dc5c bf07dc48
dc40: 8029ea4c 0000003c 00000001 be59c010 00000094 00000000 00000000 00000000
dc60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dc80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dcc0: 00000000 00000000 00000000 00000000 00000000 00000000 8010ef24 00000030
dce0: be94f5e8 be6485a0 bddf0200 be59c010 be6465a0 be6415a0 bf07ddf4 bf07dd08
dd00: 7f1cf800 7f1aa55c 1fc38c4c 00000000 bf07dd58 cccccccd 66666667 be640bc0
dd20: bf07dd54 be6415a0 1fc38c4c 00000000 00000000 be59c038 be67a9c0 be59e010
dd40: be67a9f0 be647170 8090c904 be59c010 00000000 00000001 1fc38e84 00000000
dd60: be640bc0 bddf0200 00000200 00000010 0000003f 00000002 20000013 be59c010
dd80: 8092d940 bf7ca2c0 bf07ddb4 bf07dd98 1fc38c4c 2602003f 0100ff1b 80ff1b00
dda0: 00808080 00000000 00000000 80808080 80808080 80808080 80808080 00008080
ddc0: 00000000 00000000 7f1b62b8 00000002 be6470ec be6470f0 00000000 bf07de98
dde0: 8092d940 be6415a0 bf07de94 bf07ddf8 7f1d1ed8 7f1cf1fc 00000000 00000000
de00: bf7cc4c0 00000400 be6470f0 bf07de18 8015165c be59c010 8090453c 8090453c
de20: bf07dec4 be6465a0 8014f614 80148884 0000619a 00000001 bf07c000 00000100
de40: bf07de78 00000001 7f327850 00000002 afb50401 bf064980 bf07de9c bf07de68
de60: bf064a00 803cc668 bf064a00 be6470b4 be6470b8 80844180 00000000 bf07de98
de80: 8092d940 bf07c000 bf07dec4 bf07de98 80124d18 7f1d1c44 80124c94 00000000
dea0: 00000006 80902098 80902080 40000006 00000100 bf07c000 bf07df24 bf07dec8
dec0: 8012501c 80124ca0 bf7cc4c0 bf064980 be95e1c0 04208040 80902d00 000061c7
dee0: 0000000a 80600b54 8092d940 808441f8 80902080 bf07dec8 bf03b200 bf07c000
df00: bf03b200 8090fe54 00000000 00000000 00000000 00000000 bf07df34 bf07df28
df20: 80125148 80124f28 bf07df5c bf07df38 8013deb4 8012511c 00000000 bf03b240
df40: bf03b200 8013dc90 00000000 00000000 bf07dfac bf07df60 8013ad40 8013dc9c
df60: 70448040 00000001 00000000 bf03b200 00000000 00030003 bf07df78 bf07df78
df80: 00000000 00000000 bf07df88 bf07df88 bf03b240 8013ac48 00000000 00000000
dfa0: 00000000 bf07dfb0 80107760 8013ac54 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 8c120004 1190ad04
Backtrace:
[<8018bcd4>] (relay_buf_full) from [<7f1aa604>] (_674+0x740/0xf10 [ath9k])
[<7f1aa550>] (_674 [ath9k]) from [<7f1cf800>] (_582+0x14b4/0x3708 [ath9k])
 r10:be6415a0 r9:be6465a0 r8:be59c010 r7:bddf0200 r6:be6485a0 r5:be94f5e8
 r4:00000030
[<7f1cf1f0>] (_582 [ath9k]) from [<7f1d1ed8>] (_735+0x2a0/0xec4 [ath9k])
 r10:be6415a0 r9:8092d940 r8:bf07de98 r7:00000000 r6:be6470f0 r5:be6470ec
 r4:00000002
[<7f1d1c38>] (_735 [ath9k]) from [<80124d18>] (tasklet_action+0x84/0xf8)
 r10:bf07c000 r9:8092d940 r8:bf07de98 r7:00000000 r6:80844180 r5:be6470b8
 r4:be6470b4
[<80124c94>] (tasklet_action) from [<8012501c>] (__do_softirq+0x100/0x1f4)
 r10:bf07c000 r9:00000100 r8:40000006 r7:80902080 r6:80902098 r5:00000006
 r4:00000000 r3:80124c94
[<80124f1c>] (__do_softirq) from [<80125148>] (run_ksoftirqd+0x38/0x4c)
 r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:8090fe54 r5:bf03b200
 r4:bf07c000
[<80125110>] (run_ksoftirqd) from [<8013deb4>] (smpboot_thread_fn+0x224/0x260)
[<8013dc90>] (smpboot_thread_fn) from [<8013ad40>] (kthread+0xf8/0x100)
 r9:00000000 r8:00000000 r7:8013dc90 r6:bf03b200 r5:bf03b240 r4:00000000
[<8013ac48>] (kthread) from [<80107760>] (ret_from_fork+0x14/0x34)
 r7:00000000 r6:00000000 r5:8013ac48 r4:bf03b240
Code: e89da800 e1a0c00d e92dd800 e24cb004 (e5901014)
---[ end trace dddf11ac9111b272 ]---
Kernel panic - not syncing: Fatal exception in interrupt
CPU1: stopping
CPU: 1 PID: 0 Comm: swapper/1 Tainted: P      D         4.9.85 #19
Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
Backtrace:
[<8010a708>] (dump_backtrace) from [<8010a99c>] (show_stack+0x18/0x1c)
 r7:bf093f58 r6:20000193 r5:809168e8 r4:00000000
[<8010a984>] (show_stack) from [<802a09c4>] (dump_stack+0x94/0xa8)
[<802a0930>] (dump_stack) from [<8010d184>] (handle_IPI+0xe8/0x180)
 r7:bf093f58 r6:00000000 r5:00000001 r4:808478c4
[<8010d09c>] (handle_IPI) from [<801013e8>] (gic_handle_irq+0x78/0x7c)
 r7:f4000100 r6:bf093f58 r5:f400010c r4:8090467c
[<80101370>] (gic_handle_irq) from [<8010b378>] (__irq_svc+0x58/0x8c)
Exception stack(0xbf093f58 to 0xbf093fa0)
3f40:                                                       bf7d62a0 00000000
3f60: 0010a5f4 80113460 bf092000 809043e4 00000002 80904434 bf092008 412fc09a
3f80: 00000000 bf093fb4 bf093fb8 bf093fa8 8010804c 80108050 60000013 ffffffff
 r9:bf092000 r8:bf092008 r7:bf093f8c r6:ffffffff r5:60000013 r4:80108050
[<80108014>] (arch_cpu_idle) from [<80553c2c>] (default_idle_call+0x30/0x34)
[<80553bfc>] (default_idle_call) from [<80158394>] (cpu_startup_entry+0xc4/0xfc)
[<801582d0>] (cpu_startup_entry) from [<8010ce40>] (secondary_start_kernel+0x168/0x174)
 r7:8092d2f8 r4:80913568
[<8010ccd8>] (secondary_start_kernel) from [<10101488>] (0x10101488)
 r5:00000055 r4:4f07806a
Rebooting in 10 seconds..
Reboot failed -- System halted
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

When attempt to run worker (ath10k_sta_rc_update_wk) after the station object
(ieee80211_sta) delete will trigger the kernel panic.

This problem arise in AP + Mesh configuration, Where the current node AP VAP
and neighbor node mesh VAP MAC address are same. When the current mesh node
try to establish the mesh link with neighbor node, driver peer creation for
the neighbor mesh node fails due to duplication MAC address. Already the AP
VAP created with same MAC address.

It is caused by the following scenario steps.

Steps:
1. In above condition, ath10k driver sta_state callback (ath10k_sta_state)
   fails to do the state change for a station from IEEE80211_STA_NOTEXIST
   to IEEE80211_STA_NONE due to peer creation fails. Sta_state callback is
   called from ieee80211_add_station() to handle the new station
   (neighbor mesh node) request from the wpa_supplicant.
2. Concurrently ath10k receive the sta_rc_update callback notification from
   the mesh_neighbour_update() to handle the beacon frames of the above
   neighbor mesh node. since its atomic callback, ath10k driver queue the
   work (ath10k_sta_rc_update_wk) to handle rc update.
3. Due to driver sta_state callback fails (step 1), mac80211 free the station
   object.
4. When the worker (ath10k_sta_rc_update_wk) scheduled to run, it will access
   the station object which is already deleted. so it will trigger kernel
   panic.

Added the peer exist check in sta_rc_update callback before queue the work.

Kernel Panic log:

Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0204000
[00000000] *pgd=00000000
Internal error: Oops: 17 [#1] PREEMPT SMP ARM
CPU: 1 PID: 1833 Comm: kworker/u4:2 Not tainted 3.14.77 #1
task: dcef0000 ti: d72b6000 task.ti: d72b6000
PC is at pwq_activate_delayed_work+0x10/0x40
LR is at pwq_activate_delayed_work+0xc/0x40
pc : [<c023f988>]    lr : [<c023f984>]    psr: 40000193
sp : d72b7f18  ip : 0000007a  fp : d72b6000
r10: 00000000  r9 : dd404414  r8 : d8c31998
r7 : d72b6038  r6 : 00000004  r5 : d4907ec8  r4 : dcee1300
r3 : ffffffe0  r2 : 00000000  r1 : 00000001  r0 : 00000000
Flags: nZcv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 595bc06a  DAC: 00000015
...
Process kworker/u4:2 (pid: 1833, stack limit = 0xd72b6238)
Stack: (0xd72b7f18 to 0xd72b8000)
7f00:                                                       00000001 dcee1300
7f20: 00000001 c02410dc d8c31980 dd404400 dd404400 c0242790 d8c31980 00000089
7f40: 00000000 d93e1340 00000000 d8c31980 c0242568 00000000 00000000 00000000
7f60: 00000000 c02474dc 00000000 00000000 000000f8 d8c31980 00000000 00000000
7f80: d72b7f80 d72b7f80 00000000 00000000 d72b7f90 d72b7f90 d72b7fac d93e1340
7fa0: c0247404 00000000 00000000 c0208d20 00000000 00000000 00000000 00000000
7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c023f988>] (pwq_activate_delayed_work) from [<c02410dc>] (pwq_dec_nr_in_flight+0x58/0xc4)
[<c02410dc>] (pwq_dec_nr_in_flight) from [<c0242790>] (worker_thread+0x228/0x360)
[<c0242790>] (worker_thread) from [<c02474dc>] (kthread+0xd8/0xec)
[<c02474dc>] (kthread) from [<c0208d20>] (ret_from_fork+0x14/0x34)
Code: e92d4038 e1a05000 ebffffbc[69210.619376] SMP: failed to stop secondary CPUs
Rebooting in 3 seconds..
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

The skb may be freed in tx completion context before
trace_ath10k_wmi_cmd is called. This can be easily captured when
KASAN(Kernel Address Sanitizer) is enabled. The fix is to move
trace_ath10k_wmi_cmd before the send operation. As the ret has no
meaning in trace_ath10k_wmi_cmd then, so remove this parameter too.
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Whenever the WLAN interface is started the FW
version and caps are printed.
The caps now will be displayed only in debug mode.
Firmware version will be displayed only once on first
startup of the interface.

Change-Id: I4db6ea7f384fe15eebe4c3ddb1d1ccab00094332
Signed-off-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

This fixes false radar detection (of radar type 7)
in Japan region by correcting the radar pulse type
to Chirp as per specification.
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Export the final Transmit Power Control (TPC) value, which is the
minimum of control power and existing TPC value to user space via
a new debugfs file "tpc_stats_final" to help with debugging.
It works with the new wmi cmd and event introduced in 10.4 firmware
branch.

WMI command ID: WMI_PDEV_GET_TPC_TABLE_CMDID
WMI event ID: WMI_PDEV_TPC_TABLE_EVENTID

cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final

$ cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats_final

TPC config for channel 5180 mode 10

CTL             =  0x 0 Reg. Domain             = 58
Antenna Gain    =  0 Reg. Max Antenna Gain      =   0
Power Limit     = 60 Reg. Max Power             = 60
Num tx chains   =  2 Num supported rates        = 109

******************* CDD POWER TABLE ****************

No.  Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0    CCK      0x40        0          0
1    CCK      0x41        0          0
[...]
107  HTCUP    0x 0       46          46
108  HTCUP    0x 0       46          46

******************* STBC POWER TABLE ****************

No.  Preamble Rate_code tpc_value1 tpc_value2 tpc_value3
0    CCK      0x40        0          0
1    CCK      0x41        0          0
[...]
107  HTCUP    0x 0        46         46
108  HTCUP    0x 0        46         46

***********************************
TXBF not supported
**********************************

The existing tpc_stats debugfs file provides the dump
which is minimum of target power and regulatory domain.

cat /sys/kernel/debug/ieee80211/phyX/ath10k/tpc_stats

Hardware_used: QCA4019
Firmware version: firmware-5.bin_10.4-3.0-00209
Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Added per tid sta counters for the following

- Total number MSDUs received from firmware
- Number of MSDUs received with errors like decryption, crc, mic ,etc.
- Number of MSDUs dropped in the driver
- A-MPDU/A-MSDU subframe stats
- Number of MSDUS passed to mac80211

All stats other than A-MPDU stats are only for received data frames.
A-MPDU stats might have stats for management frames when monitor
interface is active where management frames are notified both in wmi
and HTT interfaces.

These per tid stats can be enabled with tid bitmask through a debugfs
like below

 echo <tid_bitmask> > /sys/kernel/debug/ieee80211/phyX/ath10k/sta_tid_stats_mask

 tid 16 (tid_bitmask 0x10000) is used for non-qos data/management frames

The stats are read from
/sys/kernel/debug/ieee80211/phyX/netdev\:wlanX/stations/<sta_mac>/dump_tid_stats

Sample output:

 To enable rx stats for tid 0, 5 and 6,

 echo 0x00000061 > /sys/kernel/debug/ieee80211/phy0/ath10k/sta_tid_stats_mask

cat /sys/kernel/debug/ieee80211/phy0/netdev\:wlan15/stations/8c\:fd\:f0\:0a\:8e\:df/dump_tid_stats

  		Driver Rx pkt stats per tid, ([tid] count)
                ------------------------------------------
MSDUs from FW                   [00] 2567        [05] 3178        [06] 1089
MSDUs unchained                 [00] 0           [05] 0           [06] 0
MSDUs locally dropped:chained   [00] 0           [05] 0           [06] 0
MSDUs locally dropped:filtered  [00] 0           [05] 0           [06] 0
MSDUs queued for mac80211       [00] 2567        [05] 3178        [06] 1089
MSDUs with error:fcs_err        [00] 0           [05] 0           [06] 2
MSDUs with error:tkip_err       [00] 0           [05] 0           [06] 0
MSDUs with error:crypt_err      [00] 0           [05] 0           [06] 0
MSDUs with error:peer_idx_inval [00] 0           [05] 0           [06] 0

A-MPDU num subframes upto 10    [00] 2567        [05] 3178        [06] 1087
A-MPDU num subframes 11-20      [00] 0           [05] 0           [06] 0
A-MPDU num subframes 21-30      [00] 0           [05] 0           [06] 0
A-MPDU num subframes 31-40      [00] 0           [05] 0           [06] 0
A-MPDU num subframes 41-50      [00] 0           [05] 0           [06] 0
A-MPDU num subframes 51-60      [00] 0           [05] 0           [06] 0
A-MPDU num subframes >60        [00] 0           [05] 0           [06] 0

A-MSDU num subframes 1          [00] 2567        [05] 3178        [06] 1089
A-MSDU num subframes 2          [00] 0           [05] 0           [06] 0
A-MSDU num subframes 3          [00] 0           [05] 0           [06] 0
A-MSDU num subframes 4          [00] 0           [05] 0           [06] 0
A-MSDU num subframes >4         [00] 0           [05] 0           [06] 0
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.17

The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.

Major changes:

wl1251

* read the MAC address from the NVS file

rtlwifi

* enable mac80211 fast-tx support

mt76

* add capability to select tx/rx antennas

mt7601

* let mac80211 validate rx CCMP Packet Number (PN)

rsi

* bluetooth: add new btrsi driver

* btcoex support with the new btrsi driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 25b0b9c4 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Jon Maloy jon.maloy@ericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>

There is an && vs || typo here, which potentially leads to a NULL
dereference.

Fixes: e9e1e978 ("ibmvnic: Update TX pool cleaning routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>