Commits · ec686b017167e4d306f295d21399d532783a69a0 · nexedi / linux

16 Aug, 2016 40 commits

fs/dcache.c: avoid soft-lockup in dput() · ec686b01

Wei Fang authored Jul 06, 2016

commit 47be6184 upstream.

We triggered soft-lockup under stress test which
open/access/write/close one file concurrently on more than
five different CPUs:

WARN: soft lockup - CPU#0 stuck for 11s! [who:30631]
...
[<ffffffc0003986f8>] dput+0x100/0x298
[<ffffffc00038c2dc>] terminate_walk+0x4c/0x60
[<ffffffc00038f56c>] path_lookupat+0x5cc/0x7a8
[<ffffffc00038f780>] filename_lookup+0x38/0xf0
[<ffffffc000391180>] user_path_at_empty+0x78/0xd0
[<ffffffc0003911f4>] user_path_at+0x1c/0x28
[<ffffffc00037d4fc>] SyS_faccessat+0xb4/0x230

->d_lock trylock may failed many times because of concurrently
operations, and dput() may execute a long time.

Fix this by replacing cpu_relax() with cond_resched().
dput() used to be sleepable, so make it sleepable again
should be safe.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ec686b01

Revert "mm, mempool: only set __GFP_NOMEMALLOC if there are free elements" · 8d80b5e1

Michal Hocko authored Jul 28, 2016

commit 4e390b2b upstream.

This reverts commit f9054c70 ("mm, mempool: only set __GFP_NOMEMALLOC
if there are free elements").

There has been a report about OOM killer invoked when swapping out to a
dm-crypt device.  The primary reason seems to be that the swapout out IO
managed to completely deplete memory reserves.  Ondrej was able to
bisect and explained the issue by pointing to f9054c70 ("mm,
mempool: only set __GFP_NOMEMALLOC if there are free elements").

The reason is that the swapout path is not throttled properly because
the md-raid layer needs to allocate from the generic_make_request path
which means it allocates from the PF_MEMALLOC context.  dm layer uses
mempool_alloc in order to guarantee a forward progress which used to
inhibit access to memory reserves when using page allocator.  This has
changed by f9054c70 ("mm, mempool: only set __GFP_NOMEMALLOC if
there are free elements") which has dropped the __GFP_NOMEMALLOC
protection when the memory pool is depleted.

If we are running out of memory and the only way forward to free memory
is to perform swapout we just keep consuming memory reserves rather than
throttling the mempool allocations and allowing the pending IO to
complete up to a moment when the memory is depleted completely and there
is no way forward but invoking the OOM killer.  This is less than
optimal.

The original intention of f9054c70 was to help with the OOM
situations where the oom victim depends on mempool allocation to make a
forward progress.  David has mentioned the following backtrace:

  schedule
  schedule_timeout
  io_schedule_timeout
  mempool_alloc
  __split_and_process_bio
  dm_request
  generic_make_request
  submit_bio
  mpage_readpages
  ext4_readpages
  __do_page_cache_readahead
  ra_submit
  filemap_fault
  handle_mm_fault
  __do_page_fault
  do_page_fault
  page_fault

We do not know more about why the mempool is depleted without being
replenished in time, though.  In any case the dm layer shouldn't depend
on any allocations outside of the dedicated pools so a forward progress
should be guaranteed.  If this is not the case then the dm should be
fixed rather than papering over the problem and postponing it to later
by accessing more memory reserves.

mempools are a mechanism to maintain dedicated memory reserves to
guaratee forward progress.  Allowing them an unbounded access to the
page allocator memory reserves is going against the whole purpose of
this mechanism.

Bisected by Ondrej Kozina.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160721145309.GR26379@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: NeilBrown <neilb@suse.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8d80b5e1

fuse: fix wrong assignment of ->flags in fuse_send_init() · dac176f0

Wei Fang authored Jul 25, 2016

commit 9446385f upstream.

FUSE_HAS_IOCTL_DIR should be assigned to ->flags, it may be a typo.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 69fe05c9 ("fuse: add missing INIT flags")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dac176f0

fuse: fuse_flush must check mapping->flags for errors · d34c0dab

Maxim Patlasov authored Jul 19, 2016

commit 9ebce595 upstream.

fuse_flush() calls write_inode_now() that triggers writeback, but actual
writeback will happen later, on fuse_sync_writes(). If an error happens,
fuse_writepage_end() will set error bit in mapping->flags. So, we have to
check mapping->flags after fuse_sync_writes().
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d34c0dab

fuse: fsync() did not return IO errors · 2bfc3723

Alexey Kuznetsov authored Jul 19, 2016

commit ac7f052b upstream.

Due to implementation of fuse writeback filemap_write_and_wait_range() does
not catch errors. We have to do this directly after fuse_sync_writes()
Signed-off-by: Alexey Kuznetsov <kuznet@virtuozzo.com>
Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 4d99ff8f ("fuse: Turn writeback cache on")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

2bfc3723

x86/power/64: Fix hibernation return address corruption · 75b52369

Josh Poimboeuf authored Jul 28, 2016

commit 4ce827b4 upstream.

In kernel bug 150021, a kernel panic was reported when restoring a
hibernate image. Only a picture of the oops was reported, so I can't
paste the whole thing here. But here are the most interesting parts:

kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle kernel paging request at ffff8804615cfd78
...
RIP: ffff8804615cfd78
RSP: ffff8804615f0000
RBP: ffff8804615cfdc0
...
Call Trace:
do_signal+0x23
exit_to_usermode_loop+0x64
...

The RIP is on the same page as RBP, so it apparently started executing
on the stack.

The bug was bisected to commit ef0f3ed5 (x86/asm/power: Create
stack frames in hibernate_asm_64.S), which in retrospect seems quite
dangerous, since that code saves and restores the stack pointer from a
global variable ('saved_context').

There are a lot of moving parts in the hibernate save and restore paths,
so I don't know exactly what caused the panic. Presumably, a FRAME_END
was executed without the corresponding FRAME_BEGIN, or vice versa. That
would corrupt the return address on the stack and would be consistent
with the details of the above panic.

[ rjw: One major problem is that by the time the FRAME_BEGIN in
restore_registers() is executed, the stack pointer value may not
be valid any more. Namely, the stack area pointed to by it
previously may have been overwritten by some image memory contents
and that page frame may now be used for whatever different purpose
it had been allocated for before hibernation. In that case, the
FRAME_BEGIN will corrupt that memory. ]

Instead of doing the frame pointer save/restore around the bounds of the
affected functions, just do it around the call to swsusp_save().

That has the same effect of ensuring that if swsusp_save() sleeps, the
frame pointers will be correct. It's also a much more obviously safe
way to do it than the original patch. And objtool still doesn't report
any warnings.

Fixes: ef0f3ed5 (x86/asm/power: Create stack frames in hibernate_asm_64.S)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=150021Reported-by: Andre Reinke <andre.reinke@mailbox.org>
Tested-by: Andre Reinke <andre.reinke@mailbox.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

75b52369

x86/microcode: Fix suspend to RAM with builtin microcode · 4d501510

Borislav Petkov authored Jun 06, 2016

commit 4b703305 upstream.

Usually, after we have found the proper microcode blob for the current
machine, we stash it away for later use with save_microcode_in_initrd().

However, with builtin microcode which doesn't come from the initrd, we
don't call that function because CONFIG_BLK_DEV_INITRD=n and even if
set, we don't have a valid initrd.

In order to fix this, let's make save_microcode_in_initrd() an
fs_initcall which runs before rootfs_initcall() as this was the time it
was called previously through:

 rootfs_initcall(populate_rootfs)
 |-> free_initrd()
     |-> free_initrd_mem()
         |-> save_microcode_in_initrd()

Also, we make it run independently from initrd functionality being
present or not.

And since it is called in the microcode loader only now, we can also
make it static.
Reported-and-tested-by: Jim Bos <jim876@xs4all.nl>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1465225850-7352-3-git-send-email-bp@alien8.deSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

4d501510

radix-tree: account nodes to memcg only if explicitly requested · 0ac814ee

Vladimir Davydov authored Aug 02, 2016

commit 05eb6e72 upstream.

Radix trees may be used not only for storing page cache pages, so
unconditionally accounting radix tree nodes to the current memory cgroup
is bad: if a radix tree node is used for storing data shared among
different cgroups we risk pinning dead memory cgroups forever.

So let's only account radix tree nodes if it was explicitly requested by
passing __GFP_ACCOUNT to INIT_RADIX_TREE. Currently, we only want to
account page cache entries, so mark mapping->page_tree so.

Fixes: 58e698af ("radix-tree: account radix_tree_node to memory cgroup")
Link: http://lkml.kernel.org/r/1470057188-7864-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

0ac814ee

sysv, ipc: fix security-layer leaking · efd09342

Fabian Frederick authored Aug 02, 2016

commit 9b24fef9 upstream.

Commit 53dad6d3 ("ipc: fix race with LSMs") updated ipc_rcu_putref()
to receive rcu freeing function but used generic ipc_rcu_free() instead
of msg_rcu_free() which does security cleaning.

Running LTP msgsnd06 with kmemleak gives the following:

  cat /sys/kernel/debug/kmemleak

  unreferenced object 0xffff88003c0a11f8 (size 8):
    comm "msgsnd06", pid 1645, jiffies 4294672526 (age 6.549s)
    hex dump (first 8 bytes):
      1b 00 00 00 01 00 00 00                          ........
    backtrace:
      kmemleak_alloc+0x23/0x40
      kmem_cache_alloc_trace+0xe1/0x180
      selinux_msg_queue_alloc_security+0x3f/0xd0
      security_msg_queue_alloc+0x2e/0x40
      newque+0x4e/0x150
      ipcget+0x159/0x1b0
      SyS_msgget+0x39/0x40
      entry_SYSCALL_64_fastpath+0x13/0x8f

Manfred Spraul suggested to fix sem.c as well and Davidlohr Bueso to
only use ipc_rcu_free in case of security allocation failure in newary()

Fixes: 53dad6d3 ("ipc: fix race with LSMs")
Link: http://lkml.kernel.org/r/1470083552-22966-1-git-send-email-fabf@skynet.beSigned-off-by: Fabian Frederick <fabf@skynet.be>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

efd09342

block: fix use-after-free in seq file · 199e5c22

Vegard Nossum authored Jul 29, 2016

commit 77da1605 upstream.

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

199e5c22

x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace · fe128ba3

David Howells authored Jul 27, 2016

commit f7d66562 upstream.

x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl(). The latter will work in a lot of cases, thereby
hiding the issue.
Reported-by: Stephan Mueller <smueller@chronox.de>
Tested-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.ukSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fe128ba3

mm: memcontrol: fix memcg id ref counter on swap charge move · 65eee9e0

Vladimir Davydov authored Aug 11, 2016

commit 615d66c3 upstream.

Since commit 73f576c0 ("mm: memcontrol: fix cgroup creation failure
after many small jobs") swap entries do not pin memcg->css.refcnt
directly. Instead, they pin memcg->id.ref. So we should adjust the
reference counters accordingly when moving swap charges between cgroups.

Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.comSigned-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

65eee9e0

mm: memcontrol: fix swap counter leak on swapout from offline cgroup · 8d87f55b

Vladimir Davydov authored Aug 11, 2016

commit 1f47b61f upstream.

An offline memory cgroup might have anonymous memory or shmem left
charged to it and no swap.  Since only swap entries pin the id of an
offline cgroup, such a cgroup will have no id and so an attempt to
swapout its anon/shmem will not store memory cgroup info in the swap
cgroup map.  As a result, memcg->swap or memcg->memsw will never get
uncharged from it and any of its ascendants.

Fix this by always charging swapout to the first ancestor cgroup that
hasn't released its id yet.

[hannes@cmpxchg.org: add comment to mem_cgroup_swapout]
[vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()]
  Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza
Fixes: 73f576c0 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.comSigned-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

8d87f55b

powerpc/bpf/jit: Disable classic BPF JIT on ppc64le · d71e050d

Naveen N. Rao authored Jun 22, 2016

commit 844e3be4 upstream.

Classic BPF JIT was never ported completely to work on little endian
powerpc. However, it can be enabled and will crash the system when used.
As such, disable use of BPF JIT on ppc64le.

Fixes: 7c105b63 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d71e050d

powerpc/eeh: Fix invalid cached PE primary bus · 77bf0465

Gavin Shan authored Jun 17, 2016

commit a3aa256b upstream.

The PE primary bus cannot be got from its child devices when having
full hotplug in error recovery. The PE primary bus is cached, which
is done in commit <05ba75f8> ("powerpc/eeh: Fix stale cached primary
bus"). In eeh_reset_device(), the flag (EEH_PE_PRI_BUS) is cleared
before the PCI hot remove. eeh_pe_bus_get() then returns NULL as the
PE primary bus in pnv_eeh_reset() and it crashes the kernel eventually.

This fixes the issue by clearing the flag (EEH_PE_PRI_BUS) before the
PCI hot add. With it, the PowerNV EEH reset backend (pnv_eeh_reset())
can get valid PE primary bus through eeh_pe_bus_get().

Fixes: 67086e32 ("powerpc/eeh: powerpc/eeh: Support error recovery for VF PE")
Reported-by: Pridhiviraj Paidipeddi <ppaiddipe@in.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

77bf0465

udf: Prevent stack overflow on corrupted filesystem mount · 1e80f40d

Alden Tondettar authored Apr 25, 2016

commit a47241cd upstream.

Presently, a corrupted or malicious UDF filesystem containing a very large
number (or cycle) of Logical Volume Integrity Descriptor extent
indirections may trigger a stack overflow and kernel panic in
udf_load_logicalvolint() on mount.

Replace the unnecessary recursion in udf_load_logicalvolint() with
simple iteration. Set an arbitrary limit of 1000 indirections (which would
have almost certainly overflowed the stack without this fix), and treat
such cases as if there were no LVID.
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1e80f40d

x86/mm/pat: Fix BUG_ON() in mmap_mem() on QEMU/i386 · 1537fac9

Toshi Kani authored Apr 11, 2016

commit 1886297c upstream.

The following BUG_ON() crash was reported on QEMU/i386:

  kernel BUG at arch/x86/mm/physaddr.c:79!
  Call Trace:
  phys_mem_access_prot_allowed
  mmap_mem
  ? mmap_region
  mmap_region
  do_mmap
  vm_mmap_pgoff
  SyS_mmap_pgoff
  do_int80_syscall_32
  entry_INT80_32

after commit:

  edfe63ec ("x86/mtrr: Fix Xorg crashes in Qemu sessions")

PAT is now set to disabled state when MTRRs are disabled.
Thus, reactivating the __pa(high_memory) check in
phys_mem_access_prot_allowed().

When CONFIG_DEBUG_VIRTUAL is set, __pa() calls __phys_addr(),
which in turn calls slow_virt_to_phys() for 'high_memory'.
Because 'high_memory' is set to (the max direct mapped virt
addr + 1), it is not a valid virtual address.  Hence,
slow_virt_to_phys() returns 0 and hit the BUG_ON.  Using
__pa_nodebug() instead of __pa() will fix this BUG_ON.

However, this code block, originally written for Pentiums and
earlier, is no longer adequate since a 32-bit Xen guest has
MTRRs disabled and supports ZONE_HIGHMEM.  In this setup,
this code sets UC attribute for accessing RAM in high memory
range.

Delete this code block as it has been unused for a long time.
Reported-by: kernel test robot <ying.huang@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1460403360-25441-1-git-send-email-toshi.kani@hpe.com
Link: https://lkml.org/lkml/2016/4/1/608Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>