- 25 May, 2011 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfinLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (37 commits) Blackfin: use new common PERCPU_INPUT define MAINTAINERS: Fix Analog Devices mailinglist address Blackfin: boards: update ASoC resources after machine driver overhaul Blackfin: work around anomaly 05000480 Blackfin: fix addr type with bfin_write_{or,and} helpers Blackfin: convert /proc/sram to seq_file Blackfin: switch /proc/gpio to seq_file Blackfin: fix indentation with bfin_read() helper Blackfin: convert old cpumask API to new one Blackfin: don't touch task->cpus_allowed directly Blackfin: don't touch cpu_possible_map and cpu_present_map directly Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout Blackfin: initial perf_event support Blackfin: update anomaly lists to latest public info Blackfin: use on-chip reset func with newer parts Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs Blackfin: optimize MMR reads during startup a bit Blackfin: bf537: demux port H mask A and emac rx ints Blackfin: bf537: fix excessive gpio int demuxing Blackfin: bf54x: drop unused pm gpio handling ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds authored
* 'rmobile-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (34 commits) ARM: mach-shmobile: mackerel: add renesas_usbhs support for USB1 ARM: mach-shmobile: Correct the G4EVM SDHI0 I/O range. ARM: arch-shmobile: sh7372: add renesas_usbhs irq support ARM: mach-shmobile: sh73a0: mark DMA slave ID 0 as invalid ARM: mach-shmobile: mark DMA slave ID 0 as invalid ARM: mach-shmobile: Enable DMAEngine for SDHI on AG5EVM ARM: mach-shmobile: Enable DMAEngine for MMCIF on AG5EVM ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC dmaengine: shdma: Update SH_DMAC_MAX_CHANNELS to 20 dmaengine: shdma: Fix SH_DMAC_MAX_CHANNELS handling dmaengine: shdma: Make second memory window optional ARM: mach-shmobile: Tidy up after SH7372 pm changes. ARM: mach-shmobile: sh7372 Core Standby CPUIdle ARM: mach-shmobile: CPUIdle support ARM: mach-shmobile: sh7372 Core Standby Suspend-to-RAM ARM: mach-shmobile: Suspend-to-RAM support mailmap: Add entry for Damian Hobson-Garcia. ARM: switch mackerel to dynamically manage the platform camera ARM: mach-shmobile: Add SDHI support for AG5EVM and sh73a0 ARM: arch-shmobile: Use multiple irq vectors for SDHI ...
-
Thomas Gleixner authored
commit 9ec26907 ("timerfd: Manage cancelable timers in timerfd") introduced a CONFIG_HIGHRES_TIMERS (should be CONFIG_HIGH_RES_TIMERS) typo, which caused applications depending on CLOCK_REALTIME timers to become sluggy due to the fact that the time base of the realtime timers was not updated when the wall clock time was set. This causes anything from 100% CPU use for some applications to odd delays and hickups. Reported-bisected-and-tested-by:
Anca Emanuel <anca.emanuel@gmail.com> Tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Fatfingered-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: export_report: use warn() to issue WARNING, so they go to stderr export_report: sort SECTION 2 output export_report: do collectcfiles work in perl itself kbuild: make versioncheck work in KBUILD_OUTDIR kbuild: make includecheck work in KBUILD_OUTDIR kbuild: make headerdep work in KBUILD_OUTDIR kbuild: add targets to PHONY kbuild: don't warn about include/linux/version.h not including itself eradicate bashisms in scripts/patch-kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6Linus Torvalds authored
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: kbuild: Create a kernel-headers RPM rpm-pkg: Fix when current directory is a symlink Replace '-' in kernel version with '_'
-
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-clientLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (23 commits) ceph: fix cap flush race reentrancy libceph: subscribe to osdmap when cluster is full libceph: handle new osdmap down/state change encoding rbd: handle online resize of underlying rbd image ceph: avoid inode lookup on nfs fh reconnect ceph: use LOOKUPINO to make unconnected nfs fh more reliable rbd: use snprintf for disk->disk_name rbd: cleanup: make kfree match kmalloc rbd: warn on update_snaps failure on notify ceph: check return value for start_request in writepages ceph: remove useless check libceph: add missing breaks in addr_set_port libceph: fix TAG_WAIT case ceph: fix broken comparison in readdir loop libceph: fix osdmap timestamp assignment ceph: fix rare potential cap leak libceph: use snprintf for unknown addrs libceph: use snprintf for formatting object name ceph: use snprintf for dirstat content libceph: fix uninitialized value when no get_authorizer method is set ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fsLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9p: update Documentation pointers net/9p: enable 9p to work in non-default network namespace net/9p: p9_idpool_get return -1 on error fs/9p: Don't clunk dentry fid when we fail to get a writeback inode 9p: Small cleanup in <net/9p/9p.h> 9p: remove experimental tag from tested configurations 9p: typo fixes and minor cleanups net/9p: Change linuxdoc names to match functions.
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.40/splice' of git://git.kernel.dk/linux-2.6-block: splice: add wakeup_pipe_readers()
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.40/drivers' of git://git.kernel.dk/linux-2.6-block: (110 commits) loop: handle on-demand devices correctly loop: limit 'max_part' module param to DISK_MAX_PARTS drbd: fix warning drbd: fix warning drbd: Fix spelling drbd: fix schedule in atomic drbd: Take a more conservative approach when deciding max_bio_size drbd: Fixed state transitions after async outdate-peer-handler returned drbd: Disallow the peer_disk_state to be D_OUTDATED while connected drbd: Fix for the connection problems on high latency links drbd: fix potential activity log refcount imbalance in error path drbd: Only downgrade the disk state in case of disk failures drbd: fix disconnect/reconnect loop, if ping-timeout == ping-int drbd: fix potential distributed deadlock lru_cache.h: fix comments referring to ts_ instead of lc_ drbd: Fix for application IO with the on-io-error=pass-on policy xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions. xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override. xen/blkback: don't fail empty barrier requests xen/blkback: fix xenbus_transaction_start() hang caused by double xenbus_transaction_end() ...
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-2.6.40/core' of git://git.kernel.dk/linux-2.6-block: (40 commits) cfq-iosched: free cic_index if cfqd allocation fails cfq-iosched: remove unused 'group_changed' in cfq_service_tree_add() cfq-iosched: reduce bit operations in cfq_choose_req() cfq-iosched: algebraic simplification in cfq_prio_to_maxrq() blk-cgroup: Initialize ioc->cgroup_changed at ioc creation time block: move bd_set_size() above rescan_partitions() in __blkdev_get() block: call elv_bio_merged() when merged cfq-iosched: Make IO merge related stats per cpu cfq-iosched: Fix a memory leak of per cpu stats for root group backing-dev: Kill set but not used var in bdi_debug_stats_show() block: get rid of on-stack plugging debug checks blk-throttle: Make no throttling rule group processing lockless blk-cgroup: Make cgroup stat reset path blkg->lock free for dispatch stats blk-cgroup: Make 64bit per cpu stats safe on 32bit arch blk-throttle: Make dispatch stats per cpu blk-throttle: Free up a group only after one rcu grace period blk-throttle: Use helper function to add root throtl group to lists blk-throttle: Introduce a helper function to fill in device details blk-throttle: Dynamically allocate root group blk-cgroup: Allow sleeping while dynamically allocating a group ...
-
Linus Torvalds authored
Merge branch 'timers-ptp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-ptp-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: ptp: Fix dp83640 build warning when building statically ptp: Added a clock driver for the National Semiconductor PHYTER. ptp: Added a clock driver for the IXP46x. ptp: Added a clock that uses the eTSEC found on the MPC85xx. ptp: Added a brand new class driver for ptp clocks.
-
Linus Torvalds authored
Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: RCU conversion
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: (126 commits) sh_mobile_meram: Safely disable MERAM operation when not initialized video: mb862xxfb: add support for L1 displaying video: mb862xx: add support for controller's I2C bus adapter video: mb862xxfb: relocate register space to get contiguous vram video: mb862xxfb: use pre-initialized configuration for PCI GDCs video: mb862xxfb: correct fix.smem_len field initialization video: s3c-fb: correct transparency checking in 32bpp video: s3c-fb: add gpio setup function to resume function fbdev/amifb: Remove superfluous alignment of frame buffer memory fbdev/amifb: Do not call panic() if there's not enough Chip RAM fbdev/amifb: Correct check for video memory size video: mb862xxfb: Require either FB_MB862XX_PCI_GDC or FB_MB862XX_LIME video: s3c-fb: add window variant information for S5P video: s3c-fb: add additional validate bpps video: s3c-fb: correct window osd size offset values udlfb: include prefetch.h explicitly drivers/video/s3c2410fb.c: Convert release_resource to release_mem_region drivers/video/sm501fb.c: Convert release_resource to release_mem_region drivers/video: Convert release_resource to release_mem_region video, udlfb: Fix two build warnings about 'ignoring return value' ...
-
Andrew Morton authored
alpha allmodconfig: drivers/tty/serial/pch_uart.c: In function 'dma_handle_tx': drivers/tty/serial/pch_uart.c:873: error: implicit declaration of function 'kzalloc' drivers/tty/serial/pch_uart.c:873: warning: assignment makes pointer from integer without a cast drivers/tty/serial/pch_uart.c: In function 'pch_uart_init_port': drivers/tty/serial/pch_uart.c:1403: warning: assignment makes pointer from integer without a cast Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Andrew Morton authored
alpha allmodconfig: drivers/gpio/ml_ioh_gpio.c: In function 'ioh_gpio_probe': drivers/gpio/ml_ioh_gpio.c:205: error: implicit declaration of function 'kzalloc' drivers/gpio/ml_ioh_gpio.c:205: warning: assignment makes pointer from integer without a cast also fix this: drivers/gpio/ml_ioh_gpio.c:145: warning: 'ioh_gpio_save_reg_conf' defined but not used drivers/gpio/ml_ioh_gpio.c:154: warning: 'ioh_gpio_restore_reg_conf' defined but not used Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Andrew Morton authored
alpha allmodconfig: drivers/gpio/vx855_gpio.c: In function 'vx855gpio_probe': drivers/gpio/vx855_gpio.c:233: error: implicit declaration of function 'kzalloc' drivers/gpio/vx855_gpio.c:233: warning: assignment makes pointer from integer without a cast Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Andrew Morton authored
We get this spurious warning: fs/ncpfs/inode.c: In function 'ncp_fill_super': fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[1u]' may be used uninitialized in this function fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[2u]' may be used uninitialized in this function fs/ncpfs/inode.c:451: warning: 'data.mounted_vol[3u]' may be used uninitialized in this function ... It's notabug, but we can easily fix it with a memset(). Reported-by:
Harry Wei <jiaweiwei.xiyou@gmail.com> Cc: Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
-
Joe Perches authored
Currently, printk lines with a only KERN_PREFIX and a quoted string without a comma or close paren that exceed 80 columns are flagged with a warning. ie: printk(KERN_WARNING "some long string that extends beond 80 cols..." "and is continued on another line\n"); Allow this form instead of emitting a warning. Signed-off-by:
Joe Perches <joe@perches.com> Cc: Andy Whitcroft <apw@canonical.com> Signed-off-by:
-
Joe Perches authored
Many module or file local logging functions use specific prefixes other than pr|dev|netdev. Allow all forms like foo_printk and foo_err to be longer than 80 columns. Also allow MODULE_<BAR> declarations to be longer than 80 columns. Signed-off-by:
-
Joe Perches authored
Add a warning for unterminated quoted strings with line continuations as these frequently add unwanted whitespace. Signed-off-by:
-
Stephen Boyd authored
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it to lib/Kconfig.debug so each arch doesn't have to define it. This obviously makes the option generic, but that's fine because the config is already used in generic code. It's not obvious to me that sysrq-P actually does anything caution by keeping the most inclusive wording. Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Acked-by:
David S. Miller <davem@davemloft.net> Acked-by:
Richard Weinberger <richard@nod.at> Acked-by:
Mike Frysinger <vapier@gentoo.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Shaohua Li authored
The percpu_counter_*_positive() API in UP case doesn't check if return value is positive. Add comments to explain why we don't. Also if count < 0, returns 0 instead of 1 for *read_positive(). [akpm@linux-foundation.org: tweak comment] Signed-off-by:
Shaohua Li <shaohua.li@intel.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
So we can specify the virtual address as the base of the pool chunk and then get physical addresses for hardware IP. For example on at91 we will use this on spi, uart or macb Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com> Cc: Jes Sorensen <jes@wildopensource.com> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
Signed-off-by:
-
Stephen Boyd authored
DEBUG_PER_CPU_MAPS is used in lib/cpumask.c as well as in inlcude/linux/cpumask.h and thus it has outgrown its use within x86 and powerpc alone. Any arch with SMP support may want to get some more debugging, so make this option generic. Signed-off-by:
-
Alexey Dobriyan authored
There is quite a lot of code which does copy_from_user() + strict_strto*() or simple_strto*() combo in slightly different ways. Before doing conversions all over tree, let's get final API correct. Enter kstrtoull_from_user() and friends. Typical code which uses them looks very simple: TYPE val; int rv; rv = kstrtoTYPE_from_user(buf, count, 0, &val); if (rv < 0) return rv; [use val] return count; There is a tiny semantic difference from the plain kstrto*() API -- the latter allows any amount of leading zeroes, while the former copies data into buffer on stack and thus allows leading zeroes as long as it fits into buffer. This shouldn't be a problem for typical usecase "echo 42 > /proc/x". The point is to make reading one integer from userspace _very_ simple and very bug free. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Ilia Mirkin authored
This has no actual effect, since sizeof(struct hlist_head) == sizeof(struct hlist_head *), but it's still the wrong type to use. The semantic match that finds this problem: // <smpl> @@ type T; identifier x; @@ T *x; ... * x = kzalloc(... * sizeof(T*) * ..., ...); // </smpl> [akpm@linux-foundation.org: use kcalloc()] Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Acked-by:
Lars Ellenberg <lars@linbit.com> Signed-off-by:
-
Uwe Kleine-König authored
This function makes a deep copy of the platform data to allow it to live in init memory. For a kernel that supports several machines and so includes the definition for several leds-gpio devices this saves quite some memory because all but one definition can be free'd after boot. As the function is used by arch code it must be builtin and so cannot go into leds-gpio.c. [akpm@linux-foundation.org: s/CONFIG_LED_REGISTER_GPIO/CONFIG_LEDS_REGISTER_GPIO/] Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by:
Richard Purdie <richard.purdie@linuxfoundation.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Tested-by:
H Hartley Sweeten <hartleys@visionengravers.com> Signed-off-by:
-
Shreshtha Kumar Sahu authored
Add add regulator support to lm3530 driver. The lm3530 driver needs to get proper regulator during device probe and enable it before accessing the device. Also it disables the regulator in case of brightness == LED_OFF, and puts it back during driver removal. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Vasily Khoruzhick authored
The H1940 machine now uses leds-gpio and leds-h1940 has no users anymore. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Cc: "Arnaud Patard (Rtp)" <arnaud.patard@rtp-net.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Jan Weitzel authored
The pca953x family are only different in number of leds and register layout Adding chipinfo to use driver with whole pca953x family Rename driver to pca953x, but left files and platformflags named pca9532. Tested with pca9530 and pca9533 Tested-by:
Juergen Kilb <j.kilb@phytec.de> Signed-off-by:
Jan Weitzel <j.weitzel@phytec.de> Acked-by:
Joachim Eastwood <joachim.eastwood@jotron.com> Tested-by:
-
Joachim Eastwood authored
Allow unused leds on pca9532 to be used as gpio. The board I am working on now has no less than 6 pca9532 chips. One chips is used for only leds, one has 14 leds and 2 gpio and the rest of the chips are gpio only. There is also one board in mainline which could use this capabilty; arch/arm/mach-iop32x/n2100.c 232 { .type = PCA9532_TYPE_NONE }, /* power OFF gpio */ 233 { .type = PCA9532_TYPE_NONE }, /* reset gpio */ This patch defines a new pin type, PCA9532_TYPE_GPIO, and registers a gpiochip if any pin has this type set. The gpio will registers all chip pins but will filter on gpio_request. [randy.dunlap@oracle.com: fix build when GPIOLIB is not enabled] Signed-off-by:Wolfram Sang <w.sang@pengutronix.de> Reviewed-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Jan Weitzel <j.weitzel@phytec.de> Cc: Juergen Kilb <j.kilb@phytec.de> Signed-off-by:
-
Esben Haabendal authored
By setting initial values blink_delay_on and blink_delay_off in a led_classdev struct, this change starts the blinking when the led is initialized. With this patch, you can initialize blink_delay_on and blink_delay_off in led_classdev with default_trigger set to "timer", and the led will start up blinking. The current ledtrig-timer implementation ignores any initial blink_delay_on/blink_delay_off settings, and requires setting blink_delay_on/blink_delay_off (typically from userspace) before the led blinks. Signed-off-by:
Esben Haabendal <eha@doredevelopment.dk> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Joe Perches authored
Tobias's email bounces and he hasn't submitted or acked a patch in git history. Signed-off-by:
-
Lucian Adrian Grijincu authored
This tree hasn't been updated since June 2008. Signed-off-by:
Lucian Adrian Grijincu <lucian.grijincu@gmail.com> Acked-by:
Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by:
-
Mike Travis authored
On larger systems, because of the numerous ACPI, Bootmem and EFI messages, the static log buffer overflows before the larger one specified by the log_buf_len param is allocated. Minimize the overflow by allocating the new log buffer as soon as possible. On kernels without memblock, a later call to setup_log_buf from kernel/init.c is the fallback. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: fix CONFIG_PRINTK=n build] Signed-off-by:
Mike Travis <travis@sgi.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jack Steiner <steiner@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Yinghai Lu authored
On larger systems, information in the kernel log is lost because there is so much early text printed, that it overflows the static log buffer before the log_buf_len kernel parameter can be processed, and a bigger log buffer allocated. Distros are relunctant to increase memory usage by increasing the size of the static log buffer, so minimize the problem by allocating the new log buffer as early as possible. This patch: Add an error return if CONFIG_HAVE_MEMBLOCK is not set instead of having to add #ifdef CONFIG_HAVE_MEMBLOCK around blocks of code calling that function. Signed-off-by:
-
Jan Beulich authored
Otherwise, the warning at the top of vsnprintf() gets triggered by kvasprintf()'s first invocation (with NULL buffer and zero size) of vsnprintf(). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
KOSAKI Motohiro authored
sparse can't parse warning and error attribute. then they should be hidden from sparse. Signed-off-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by:
-
KOSAKI Motohiro authored
commit c5e631cf ("ARRAY_SIZE: check for type") added __must_be_array(). But sparse can't parse this gcc extention. Now make C=2 makes following sparse errors a lot. kernel/futex.c:2699:25: error: No right hand side of '+'-expression Because __must_be_array() is used for ARRAY_SIZE() macro and it is used very widely. This patch fixes it. Signed-off-by:
-
