From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

mlx5 updates taken for dependencies on following patches.

* branche 'mlx5-next': (23 commits)
  IB/mlx5: Introduce uid as part of alloc/dealloc transport domain
  net/mlx5: Add shared Q counter bits
  net/mlx5: Continue driver initialization despite debugfs failure
  net/mlx5: Fold the modify lag code into function
  net/mlx5: Add lag affinity info to log
  net/mlx5: Split the activate lag function into two routines
  net/mlx5: E-Switch, Introduce flow counter affinity
  IB/mlx5: Unify e-switch representors load approach between uplink and VFs
  net/mlx5: Use lowercase 'X' for hex values
  net/mlx5: Remove duplicated include from eswitch.c
  net/mlx5: Remove the get protocol device interface entry
  net/mlx5: Support extended destination format in flow steering command
  net/mlx5: E-Switch, Change vhca id valid bool field to bit flag
  net/mlx5: Introduce extended destination fields
  net/mlx5: Revise gre and nvgre key formats
  net/mlx5: Add monitor commands layout and event data
  net/mlx5: Add support for plugged-disabled cable status in PME
  net/mlx5: Add support for PCIe power slot exceeded error in PME
  net/mlx5: Rework handling of port module events
  net/mlx5: Move flow counters data structures from flow steering header
  ...

Introduce uid as part of alloc/dealloc transport domain to match the
device specification.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Increasing the depth of control path command queue to 8K entries to handle
burst of commands. This feature needs support from FW and the driver/fw
compatibility is checked from the interface version number.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Get HWRM interface major, minor, build and patch version from FW for
checking the FW/Driver compatibility.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Acquiring the rtnl lock while holding usdev_lock could result in a
deadlock.

For example:

usnic_ib_query_port()
| mutex_lock(&us_ibdev->usdev_lock)
 | ib_get_eth_speed()
  | rtnl_lock()

rtnl_lock()
| usnic_ib_netdevice_event()
 | mutex_lock(&us_ibdev->usdev_lock)

This commit moves the usdev_lock acquisition after the rtnl lock has been
released.

This is safe to do because usdev_lock is not protecting anything being
accessed in ib_get_eth_speed(). Hence, the correct order of holding locks
(rtnl -> usdev_lock) is not violated.
Signed-off-by: Parvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When in a sleepable (non-atomic) context, wait for firmware completion
instead of polling for it.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Modify allocation of the non-SRQ receive queues such that immediate
data is aligned on a 512 byte boundary. That alignment is necessary
to pass the immediate data without copying to the block layer. When
receiving an SRP_CMD with immediate data, postpone the ib_post_recv()
call until target_execute_cmd() has finished. See also
srpt_release_cmd().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch does not change any functionality but makes the next patch
easier to read.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Neither a driver version number nor a release data is useful in
an upstream driver. Remove the word "InfiniBand" from the driver
description because recently RoCE support has been added to this
driver.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add documentation for those structure members for which it is missing.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Make sure that long strings occur on a single line as required by the
coding standard.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Use tabs instead of spaces for indentation. Make sure that multi-line
expressions have the operator at the end of a line instead of the start.
Avoid a complaint about a missing space in a ternary expression by
changing '(boolean) ? 1: 0' into 'boolean'.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch avoids that KASAN sporadically reports the following:

BUG: KASAN: use-after-free in rxe_run_task+0x1e/0x60 [rdma_rxe]
Read of size 1 at addr ffff88801c50d8f4 by task check/24830

CPU: 4 PID: 24830 Comm: check Not tainted 4.20.0-rc6-dbg+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
 dump_stack+0x86/0xca
 print_address_description+0x71/0x239
 kasan_report.cold.5+0x242/0x301
 __asan_load1+0x47/0x50
 rxe_run_task+0x1e/0x60 [rdma_rxe]
 rxe_post_send+0x4bd/0x8d0 [rdma_rxe]
 srpt_zerolength_write+0xe1/0x160 [ib_srpt]
 srpt_close_ch+0x8b/0xe0 [ib_srpt]
 srpt_set_enabled+0xe7/0x150 [ib_srpt]
 srpt_tpg_enable_store+0xc0/0x100 [ib_srpt]
 configfs_write_file+0x157/0x1d0
 __vfs_write+0xd7/0x3d0
 vfs_write+0x102/0x290
 ksys_write+0xab/0x130
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x71/0x210
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Allocated by task 13856:
 save_stack+0x43/0xd0
 kasan_kmalloc+0xc7/0xe0
 kasan_slab_alloc+0x11/0x20
 kmem_cache_alloc+0x105/0x320
 rxe_alloc+0xff/0x1f0 [rdma_rxe]
 rxe_create_qp+0x9f/0x160 [rdma_rxe]
 ib_create_qp+0xf5/0x690 [ib_core]
 rdma_create_qp+0x6a/0x140 [rdma_cm]
 srpt_cm_req_recv.cold.59+0x1588/0x237b [ib_srpt]
 srpt_rdma_cm_req_recv.isra.35+0x1d5/0x220 [ib_srpt]
 srpt_rdma_cm_handler+0x6f/0x100 [ib_srpt]
 cma_listen_handler+0x59/0x60 [rdma_cm]
 cma_ib_req_handler+0xd5b/0x2570 [rdma_cm]
 cm_process_work+0x2e/0x110 [ib_cm]
 cm_work_handler+0x2aae/0x502b [ib_cm]
 process_one_work+0x481/0x9e0
 worker_thread+0x67/0x5b0
 kthread+0x1cf/0x1f0
 ret_from_fork+0x24/0x30

Freed by task 3440:
 save_stack+0x43/0xd0
 __kasan_slab_free+0x139/0x190
 kasan_slab_free+0xe/0x10
 kmem_cache_free+0xbc/0x330
 rxe_elem_release+0x66/0xe0 [rdma_rxe]
 rxe_destroy_qp+0x3f/0x50 [rdma_rxe]
 ib_destroy_qp+0x140/0x360 [ib_core]
 srpt_release_channel_work+0xdc/0x310 [ib_srpt]
 process_one_work+0x481/0x9e0
 worker_thread+0x67/0x5b0
 kthread+0x1cf/0x1f0
 ret_from_fork+0x24/0x30

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Request permission to send immediate data during login. If the SRP
target grants this request, send the payload of write requests <= 8 KB
as immediate data.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Move the maximum initiator to target information unit length parameter
from struct srp_target_port into struct srp_rdma_ch. This patch does
not change any functionality but makes the next patch easier to read.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Since srp_rdma_ch.max_ti_iu_len is used in the hot path, move it to the
section with data structure members used in the hot path.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch avoids that the SCSI mid-layer keeps retrying forever if
ib_post_send() fails. This was discovered while testing immediate
data support and passing a too large num_sge value to ib_post_send().

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Reserve additional space for CDBs that contain more than sixteen bytes
and set the add_cdb_len field for such CDBs as required. From the SRP
standard: "The ADDITIONAL CDB LENGTH field contains the length in
dwords of the ADDITIONAL CDB field."

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch avoids that a warning is reported when building with W=1.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Add constants and data structures to support immediate data. These
changes conform to SRP2r04.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

This patch moves all constants that come from the SRP standard into the
include/scsi/srp.h header file.

Cc: Sergey Gorenko <sergeygo@mellanox.com>
Cc: Max Gurtovoy <maxg@mellanox.com>
Cc: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>

When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not enabled, we were getting
build failures for defined but not used code.  Fix that.

Fixes: 813e90b1 ("IB/mlx5: Add advise_mr() support")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Updated HW specification file with needed bits to allow
sharing of Q counters between DEVX contexts and kernel.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.

Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Having uobject pointer embedded in ib core objects is not aligned with a
future shared ib_x model. The resource tracker only does this to keep
track of user/kernel objects - track this directly instead.
Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The verb advise_mr() is used to give advice to the kernel about an address
range that belongs to a MR.  Implement the verb and register it on the
device. The current implementation supports the only known advice to date,
prefetch.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add new ioctl method for the MR object - ADVISE_MR.

This command can be used by users to give an advice or directions to the
kernel about an address range that belongs to memory regions.

A new ib_device callback, advise_mr(), is introduced here to suupport the
new command. This command takes the following arguments:

- pd:		The protection domain to which all memory regions belong
- advice: 	The type of the advice
	  	* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH - Pre-fetch a range of
		an on-demand paging MR
	  	* IB_UVERBS_ADVISE_MR_ADVICE_PREFETCH_WRITE - Pre-fetch a range
		of an on-demand paging MR with write intention
- flags:	The properties of the advice
		* IB_UVERBS_ADVISE_MR_FLAG_FLUSH - Operation must end before
		return to the caller
- sg_list:	The list of memory ranges
- num_sge:	The number of memory ranges in the list
- attrs:	More attributes to be parsed by the provider
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When the parser of an ioctl command has the knowledge that a ptr attribute
in a bundle represents an array of structures, it is useful for it to know
the number of elements in the array. This is done by dividing the
attribute length with the element size.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add an ioctl method to destroy the PD, MR, MW, AH, flow, RWQ indirection
table and XRCD objects by handle which doesn't require any output response
during destruction.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Introduce a helper function gather_objects_handle() to copy object handles
under a spin lock.

Expose these objects handles via the uverbs ioctl interface.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

The macro MLX4_IB_SQ_HEADROOM calculates the spare room needed to be
left. Use it instead of hard-coding the HW prefetch size.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The function accidentally returns success on this error path.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

We accidentally return success on this error path.

Fixes: f931551b ("IB/qib: Add new qib driver for QLogic PCIe InfiniBand adapters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Currently a RoCE GID entry is removed from the hardware when all
references to the GID entry drop to zero. This is a change in behavior
from before the fixed patch. The GID entry should be removed from the
hardware when GID entry deletion is requested. This allows the driver
terminate ongoing traffic through the RoCE GID.

While a GID is deleted from the hardware, GID slot in the software GID
cache is not freed. GID slot is freed once all references of such GID are
dropped. This continue to ensure that such GID slot of hardware is not
allocated to new GID entry allocation request. It is allocated once all
references to GID entry drop.

This approach allows drivers to put a tombestone of some kind on the HW
GID index to block the traffic.

Fixes: b150c386 ("IB/core: Introduce GID entry reference counts")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fix typo in 'set_mr_fileds' -> 'set_mr_fields'.
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The initialization of the ib_device_ops was dropped by mistake when
rebasing the ib_device_ops series, this patch fixes that.

Fixes: 15644f57 ("RDMA/i40iw: Initialize ib_device_ops struct")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Handle atomic was left as unimplemented from 2013, remove the code till
this part will be developed.

Remove the dead code by simplifying SW completion logic which is supposed
to be the same for send and receive paths.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile tested
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>