Clean and rebuild the debugfs info for the queues being swapped.

Fixes: a34e25ab ("ionic: change the descriptor ring length without full reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>

A DSA master interface has upper network devices, each representing an
Ethernet switch port attached to it. Demultiplexing the source ports and
setting skb->dev accordingly is done through the catch-all ETH_P_XDSA
packet_type handler. Catch-all because DSA vendors have various header
implementations, which can be placed anywhere in the frame: before the
DMAC, before the EtherType, before the FCS, etc. So, the ETH_P_XDSA
handler acts like an rx_handler more than anything.

It is unlikely for the DSA master interface to have any other upper than
the DSA switch interfaces themselves. Only maybe a bridge upper*, but it
is very likely that the DSA master will have no 8021q upper. So
__netif_receive_skb_core() will try to untag the VLAN, despite the fact
that the DSA switch interface might have an 8021q upper. So the skb will
never reach that.

So far, this hasn't been a problem because most of the possible
placements of the DSA switch header mentioned in the first paragraph
will displace the VLAN header when the DSA master receives the frame, so
__netif_receive_skb_core() will not actually execute any VLAN-specific
code for it. This only becomes a problem when the DSA switch header does
not displace the VLAN header (for example with a tail tag).

What the patch does is it bypasses the untagging of the skb when there
is a DSA switch attached to this net device. So, DSA is the only
packet_type handler which requires seeing the VLAN header. Once skb->dev
will be changed, __netif_receive_skb_core() will be invoked again and
untagging, or delivery to an 8021q upper, will happen in the RX of the
DSA switch interface itself.

*see commit 9eb8eff0 ("net: bridge: allow enslaving some DSA master
network devices". This is actually the reason why I prefer keeping DSA
as a packet_type handler of ETH_P_XDSA rather than converting to an
rx_handler. Currently the rx_handler code doesn't support chaining, and
this is a problem because a DSA master might be bridged.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Landen Chao says:

====================
net-next: dsa: mt7530: add support for MT7531

This patch series adds support for MT7531.

MT7531 is the next generation of MT7530 which could be found on Mediatek
router platforms such as MT7622 or MT7629.

It is also a 7-ports switch with 5 giga embedded phys, 2 cpu ports, and
the same MAC logic of MT7530. Cpu port 6 only supports SGMII interface.
Cpu port 5 supports either RGMII or SGMII in different HW SKU, but cannot
be muxed to PHY of port 0/4 like mt7530. Due to support for SGMII
interface, pll, and pad setting are different from MT7530.

MT7531 SGMII interface can be configured in following mode:
- 'SGMII AN mode' with in-band negotiation capability
    which is compatible with PHY_INTERFACE_MODE_SGMII.
- 'SGMII force mode' without in-band negotiation
    which is compatible with 10B/8B encoding of
    PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
    which is compatible with 10B/8B encoding of
    PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.

v4 -> v5
- Add fixed-link node to dsa cpu port in dts file by suggestion of
  Vladimir Oltean.

v3 -> v4
- Adjust the coding style by suggestion of Jakub Kicinski.
  Remove unnecessary jumping label, merge continuous numeric 'switch
  cases' into one line, and keep the variables longest to shortest
  (reverse xmas tree).

v2 -> v3
- Keep the same setup logic of mt7530/mt7621 because these series of
  patches is for adding mt7531 hardware.
- Do not adjust rgmii delay when vendor phy driver presents in order to
  prevent double adjustment by suggestion of Andrew Lunn.
- Remove redundant 'Example 4' from dt-bindings by suggestion of
  Rob Herring.
- Fix typo.

v1 -> v2
- change phylink_validate callback function to support full-duplex
  gigabit only to match hardware capability.
- add description of SGMII interface.
- configure mt7531 cpu port in fastest speed by default.
- parse SGMII control word for in-band negotiation mode.
- configure RGMII delay based on phy.rst.
- Rename the definition in the header file to avoid potential conflicts.
- Add wrapper function for mdio read/write to support both C22 and C45.
- correct fixed-link speed of 2500base-x in dts.
- add MT7531 port mirror setting.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mt7531 dsa to bananapi-bpi-r64 board for 5 giga Ethernet ports support.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add mt7531 dsa to mt7622-rfb1 board for 5 giga Ethernet ports support.
mt7622 only supports 1 sgmii interface, so either gmac0 or gmac1 can be
configured as sgmii interface. In this patch, change to connect mt7622
gmac0 and mt7531 port6 through sgmii interface.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add new support for MT7531:

MT7531 is the next generation of MT7530. It is also a 7-ports switch with
5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
port 6 only supports SGMII interface. Cpu port 5 supports either RGMII
or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like
mt7530. Due to SGMII interface support, pll, and pad setting are different
from MT7530. This patch adds different initial setting, and SGMII phylink
handlers of MT7531.

MT7531 SGMII interface can be configured in following mode:
- 'SGMII AN mode' with in-band negotiation capability
    which is compatible with PHY_INTERFACE_MODE_SGMII.
- 'SGMII force mode' without in-band negotiation
    which is compatible with 10B/8B encoding of
    PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
    which is compatible with 10B/8B encoding of
    PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add devicetree binding to support the compatible mt7531 switch as used
in the MediaTek MT7531 switch.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a structure holding required operations for each device such as device
initialization, PHY port read or write, a checker whether PHY interface is
supported on a certain port, MAC port setup for either bus pad or a
specific PHY interface.

The patch is done for ready adding a new hardware MT7531, and keep the
same setup logic of existing hardware.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

x25_type_trans only needs to be called before we call netif_rx to pass
the skb to upper layers.

It does not need to be called before lapb_data_received. The LAPB module
does not need the fields that are set by calling it.

In the other two X.25 drivers - lapbether and hdlc_x25. x25_type_trans
is only called before netif_rx and not before lapb_data_received.

Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

flush_all_backlogs() may cause deadlock on systems
running processes with FIFO scheduling policy.

The above is critical in -RT scenarios, where user-space
specifically ensure no network activity is scheduled on
the CPU running the mentioned FIFO process, but still get
stuck.

This commit tries to address the problem checking the
backlog status on the remote CPUs before scheduling the
flush operation. If the backlog is empty, we can skip it.

v1 -> v2:
 - explicitly clear flushed cpu mask - Eric
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ido Schimmel says:

====================
mlxsw: Derive SBIB from maximum port speed & MTU

Petr says:

Internal buffer is a part of port headroom used for packets that are
mirrored due to triggers that the Spectrum ASIC considers "egress". Besides
ACL mirroring on port egresss this includes also packets mirrored due to
ECN marking.

This patchset changes the way the internal mirroring buffer is reserved.
Currently the buffer reflects port MTU and speed accurately. In the future,
mlxsw should support dcbnl_setbuffer hook to allow the users to set buffer
sizes by hand. In that case, there might not be enough space for growth of
the internal mirroring buffer due to MTU and speed changes. While vetoing
MTU changes would be merely confusing, port speed changes cannot be vetoed,
and such change would simply lead to issues in packet mirroring.

For these reasons, with these patches the internal mirroring buffer is
derived from maximum MTU and maximum speed achievable on the port.

Patches #1 and #2 introduce a new callback to determine the maximum speed a
given port can achieve.

With patches #3 and #4, the information about, respectively, maximum MTU
and maximum port speed, is kept in struct mlxsw_sp_port.

In patch #5, maximum MTU and maximum speed are used to determine the size
of the internal buffer. MTU update and speed update hooks are dropped,
because they are no longer necessary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The SBIB register configures the size of an internal buffer that the
Spectrum ASICs use when mirroring traffic on egress. This size should be
taken into account when validating that the port headroom buffers are not
larger than the chip can handle. Up until now this was not done, which is
incidentally not a problem, because the priority group buffers that mlxsw
auto-configures are small enough that the boundary condition could not be
violated.

However when dcbnl_setbuffer is implemented, the user has control over
sizes of PG buffers, and they might overshoot the headroom capacity.
However the size of the SBIB buffer depends on port speed, and that cannot
be vetoed. Therefore SBIB size should be deduced from maximum port speed.

Additionally, once the buffers are configured by hand, the user could get
into an uncomfortable situation where their MTU change requests get vetoed,
because the SBIB does not fit anymore. Therefore derive SBIB size from
maximum permissible MTU as well.

Remove all the code that adjusted the SBIB size whenever speed or MTU
changed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum port speed depends on link modes supported by the port, and for
Ethernet ports is constant. The maximum speed will be handy when setting
SBIB, the internal buffer used for traffic mirroring. Therefore, keep it in
struct mlxsw_sp_port for easy access.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The maximum port MTU depends on port type. On Spectrum, mlxsw configures
all ports as Ethernet ports, and the maximum MTU therefore never changes.
Besides checking MTU configuration, maximum MTU will also be handy when
setting SBIB, the internal buffer used for traffic mirroring. Therefore,
keep it in struct mlxsw_sp_port for easy access.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The SBIB register configures the size of an internal buffer that the
Spectrum ASICs use when mirroring traffic on egress. This size should be
taken into account when validating that the port headroom buffers are not
larger than the chip can handle. Up until now this was not done, which is
incidentally not a problem, because the priority group buffers that mlxsw
auto-configures are small enough that the boundary condition could not be
violated.

When dcbnl_setbuffer is implemented, the user gets control over sizes of PG
buffers, and they might overshoot the headroom capacity. However the size
of the SBIB buffer depends on port speed, which cannot be vetoed. There is
obviously no way to retroactively push back on requests for overlarge PG
buffers, or reject an overlarge MTU, or cancel losslessness of a certain
PG.

Therefore, instead of taking into account the current speed when
calculating SBIB buffer size, take into account the maximum speed that a
port with given Ethernet protocol capabilities can have.

To that end, add a new ethtool callback, ptys_max_speed, which determines
this maximum speed.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to allow reusing the logic, extract from
mlxsw_sp_port_get_link_ksettings() the code to obtain Ethernet protocol
attributes, mlxsw_sp_port_ptys_query().
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2020-09-14

This series contains updates to i40e driver only.

Li RongQing removes binding affinity mask to a fixed CPU and sets
prefetch of Rx buffer page to occur conditionally.

Björn provides AF_XDP performance improvements by not prefetching HW
descriptors, using 16 byte descriptors, and moving buffer allocation
out of Rx processing loop.

v2: Define prefetch_page_address in a common header for patch 2.
Dropped, previous, patch 5 as it is being reworked to be more
generalized.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
rxrpc: Fixes for the connection manager rewrite

Here are some fixes for the connection manager rewrite:

 (1) Fix a goto to the wrong place in error handling.

 (2) Fix a missing NULL pointer check.

 (3) The stored allocation error needs to be stored signed.

 (4) Fix a leak of connection bundle when clearing connections due to
     net namespace exit.

 (5) Fix an overget of the bundle when setting up a new client conn.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add NETIF_F_GSO_UDP_TUNNEL and NETIF_F_GSO_UDP_TUNNEL_CSUM features
to support vxlan segmentation and checksum offload. Ipip and ipv6
tunnel packets are regarded as non-tunnel pkt for hw and as for other
type of tunnel pkts, checksum offload is disabled.
Signed-off-by: Luo bin <luobin9@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:661:6: warning:
 variable 'val' set but not used [-Wunused-but-set-variable]
  661 |  u32 val;
      |      ^~~

After commit 7f966452 ("qlcnic: 83xx memory map and HW access
routines"), variable 'val' is never used in qlcnic_83xx_cam_unlock(), so
removing it to avoid build warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

drivers/net/ethernet/marvell/pxa168_eth.c:1190:6: warning:
 variable 'retval' set but not used [-Wunused-but-set-variable]
 1190 |  int retval;
      |      ^~~~~~

Function pxa168_eth_change_mtu() always return zero, so variable 'retval'
is redundant, just remove it.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

drivers/net/ethernet/freescale/fec_ptp.c:523:6: warning:
 variable 'ns' set but not used [-Wunused-but-set-variable]
  523 |  u64 ns;
      |      ^~

After commit 6605b730 ("FEC: Add time stamping code and a PTP
hardware clock"), variable 'ns' is never used in fec_time_keep(),
so removing it to avoid build warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes the following W=1 kernel build warning(s):

drivers/net/ethernet/dnet.c:510:6: warning:
 variable 'tx_status' set but not used [-Wunused-but-set-variable]
  u32 tx_status, irq_enable;
      ^~~~~~~~~

After commit 47964174 ("dnet: Dave DNET ethernet controller driver
(updated)"), variable 'tx_status' is never used in dnet_start_xmit(),
so removing it to avoid build warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SOCK_QUEUE_SHRUNK is currently used by TCP as a temporary state
that remembers if some room has been made in the rtx queue
by an incoming ACK packet.

This is later used from tcp_check_space() before
considering to send EPOLLOUT.

Problem is: If we receive SACK packets, and no packet
is removed from RTX queue, we can send fresh packets, thus
moving them from write queue to rtx queue and eventually
empty the write queue.

This stall can happen if TCP_NOTSENT_LOWAT is used.

With this fix, we no longer risk stalling sends while holes
are repaired, and we can fully use socket sndbuf.

This also removes a cache line dirtying for typical RPC
workloads.

Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This comment is outdated and no longer reflects the actual implementation
of af_packet.c.

Reasons for the new comment:

1.

In af_packet.c, the function packet_snd first reserves a headroom of
length (dev->hard_header_len + dev->needed_headroom).
Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header,
which calls dev->header_ops->create, to create the link layer header.
If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of
length (dev->hard_header_len), and checks if the user has provided a
header sized between (dev->min_header_len) and (dev->hard_header_len)
(in dev_validate_header).
This shows the developers of af_packet.c expect hard_header_len to
be consistent with header_ops.

2.

In af_packet.c, the function packet_sendmsg_spkt has a FIXME comment.
That comment states that prepending an LL header internally in a driver
is considered a bug. I believe this bug can be fixed by setting
hard_header_len to 0, making the internal header completely invisible
to af_packet.c (and requesting the headroom in needed_headroom instead).

3.

There is a commit for a WiFi driver:
commit 9454f7a8 ("mwifiex: set needed_headroom, not hard_header_len")
According to the discussion about it at:
  https://patchwork.kernel.org/patch/11407493/
The author tried to set the WiFi driver's hard_header_len to the Ethernet
header length, and request additional header space internally needed by
setting needed_headroom.
This means this usage is already adopted by driver developers.

Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Paolo Abeni says:

====================
mptcp: introduce support for real multipath xmit

This series enable MPTCP socket to transmit data on multiple subflows
concurrently in a load balancing scenario.

First the receive code path is refactored to better deal with out-of-order
data (patches 1-7). An RB-tree is introduced to queue MPTCP-level out-of-order
data, closely resembling the TCP level OoO handling.

When data is sent on multiple subflows, the peer can easily see OoO - "future"
data at the MPTCP level, especially if speeds, delay, or jitter are not
symmetric.

The other major change regards the netlink PM, which is extended to allow
creating non backup subflows in patches 9-11.

There are a few smaller additions, like the introduction of OoO related mibs,
send buffer autotuning and better ack handling.

Finally a bunch of new self-tests is introduced. The new feature is tested
ensuring that the B/W used by an MPTCP socket using multiple subflows matches
the link aggregated B/W - we use low B/W virtual links, to ensure the tests
are not CPU bounded.

v1 -> v2:
  - fix 32 bit build breakage
  - fix a bunch of checkpatch issues
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a bunch of test-cases for multiple subflow xmit:
create multiple subflows simulating different links
condition via netem and verify that the msk is able
to use completely the aggregated bandwidth.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

That is needed to let the subflows announce promptly when new
space is available in the receive buffer.

tcp_cleanup_rbuf() is currently a static function, drop the
scope modifier and add a declaration in the TCP header.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the scheduler to less trivial heuristic: cache
the last used subflow, and try to send on it a reasonably
long burst of data.

When the burst or the subflow send space is exhausted, pick
the subflow with the lower ratio between write space and
send buffer - that is, the subflow with the greater relative
amount of free space.

v1 -> v2:
 - fix 32 bit build breakage due to 64bits div
 - fix checkpath issues (uint64_t -> u64)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the 'backup' attribute of local endpoint
is ignored. Let's use it for the MP_JOIN handshake
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

So that can be accessed easily from the subflow creation
helper. No functional change intended.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a bunch of MPTCP mibs related to MPTCP OoO data
processing.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no need to use the tcp_read_sock(), we can
simply drop the skb. Additionally try to look at the
next buffer for in order data.

This both simplifies the code and avoid unneeded indirect
calls.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an RB-tree to cope with OoO (at MPTCP level) data.
__mptcp_move_skb() insert into the RB tree "future"
data, eventually coalescing skb as allowed by the
MPTCP DSN.

To simplify sequence accounting, move the DSN inside
the cb.

After successfully enqueuing in sequence data, check
if we can use any data from the RB tree.

Additionally move the data_fin check after spooling
data from the OoO tree, otherwise we could miss shutdown
events.

The RB tree code is copied as verbatim as possible
from tcp_data_queue_ofo(), with a few simplifications
due to the fact that MPTCP doesn't need to cope with
sacks. All bugs here are added by me.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Factor-out existing code, will be re-used by the
next patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let the msk sendbuf track the size of the larger subflow's
send window, so that we ensure mptcp_sendmsg() does not
exceed MPTCP-level send window.

The update is performed just before try to send any data.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a prerequisite to allow receiving data from multiple
subflows without re-injection.

Instead of dropping the OoO - "future" data in
subflow_check_data_avail(), call into __mptcp_move_skbs()
and let the msk drop that.

To avoid code duplication factor out the mptcp_subflow_discard_data()
helper.

Note that __mptcp_move_skbs() can now find multiple subflows
with data avail (comprising to-be-discarded data), so must
update the byte counter incrementally.

v1 -> v2:
 - fix checkpatch issues (unsigned -> unsigned int)
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This simplify mptcp_subflow_data_available() and will
made follow-up patches simpler.

Additionally remove the unneeded checks on subflow copied_seq:
we always whole skbs out of subflows.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, when checking for the 'msk is writable' condition, we
look at the individual subflows write space.
That works well while we send data via a single subflow, but will
not as soon as we will enable concurrent xmit on multiple subflows.

With this change msk becomes writable when the following conditions
hold:
- the socket has some free write space
- there is at least a subflow with write free space

Additionally we need to set the NOSPACE bit on all subflows
before blocking.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>