- 18 Feb, 2019 2 commits
-
-
Masahiro Yamada authored
This file does not use hweight*() at all, and the definition is surrounded by #if 0 ... #endif. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for you net-next tree: 1) Missing NFTA_RULE_POSITION_ID netlink attribute validation, from Phil Sutter. 2) Restrict matching on tunnel metadata to rx/tx path, from wenxu. 3) Avoid indirect calls for IPV6=y, from Florian Westphal. 4) Add two indirections to prepare merger of IPV4 and IPV6 nat modules, from Florian Westphal. 5) Broken indentation in ctnetlink, from Colin Ian King. 6) Patches to use struct_size() from netfilter and IPVS, from Gustavo A. R. Silva. 7) Display kernel splat only once in case of racing to confirm conntrack from bridge plus nfqueue setups, from Chieh-Min Wang. 8) Skip checksum validation for layer 4 protocols that don't need it, patch from Alin Nastac. 9) Sparse warning due to symbol that should be static in CLUSTERIP, from Wei Yongjun. 10) Add new toggle to disable SDP payload translation when media endpoint is reachable though the same interface as the signalling peer, from Alin Nastac. ==================== Signed-off-by:
-
- 17 Feb, 2019 34 commits
-
-
Wei Yongjun authored
Fixes the following sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:2431:5: warning: symbol 'hclge_set_all_vf_rst' was not declared. Should it be static? Fixes: aa5c4f17 ("net: hns3: add reset handling for VF when doing PF reset") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Wei Yongjun authored
The function meth_init_tx_ring() is called from meth_tx_timeout(), in which spin_lock is held, so we should use GFP_ATOMIC instead. Fixes: 8d4c28fb ("meth: pass struct device to DMA API functions") Signed-off-by:
-
Ivan Vecera authored
This patch sets an error message in extack when the number of qdisc handles exceeds the maximum. Also the error-code ENOSPC is more appropriate than ENOMEM in this situation. Signed-off-by:
Ivan Vecera <ivecera@redhat.com> Reported-by:
Li Shuang <shuali@redhat.com> Reviewed-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Maxime Chevallier authored
The PHY core expects PHY drivers not to set Pause and Asym_Pause bits, unless the driver only wants to specify one of them due to HW limitation. In the case of the Marvell10g driver, we don't need to set them. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/dsa/bcm_sf2_cfp.c: In function 'bcm_sf2_cfp_ipv6_rule_set': drivers/net/dsa/bcm_sf2_cfp.c:606:40: warning: variable 'v6_m_spec' set but not used [-Wunused-but-set-variable] drivers/net/dsa/bcm_sf2_cfp.c:606:30: warning: variable 'v6_spec' set but not used [-Wunused-but-set-variable] It not used any more after commit e4f7ef54 ("dsa: bcm_sf2: use flow_rule infrastructure") Signed-off-by:
-
Pieter Jansen van Vuuren authored
Check mask fields of tcp and ip flags when setting the corresponding mask flag used in hardware. Fixes: 8f256622 ("flow_offload: add flow_rule and flow_match") Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by:
John Hurley <john.hurley@netronome.com> Reviewed-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== devlink: add the ability to update device flash This series is the second step to allow trouble shooting and recovering devices in bad state without the use of netdevs as handles. We can already query FW versions over devlink, now we add the ability to update the FW. This will allow drivers to implement some from of "limp-mode" where the device can't really be used for networking and hence has no netdev, but we can interrogate it over devlink and fix the broken FW. Small but nice advantage of devlink is that it only holds the devlink instance lock during flashing, unlike ethtool which holds rtnl_lock(). ==================== Signed-off-by: -
Jakub Kicinski authored
Devlink now allows updating device flash. Implement this callback. Compared to ethtool update we no longer have to release the networking locks - devlink doesn't take them. Signed-off-by:
-
Jakub Kicinski authored
If driver does not support ethtool flash update operation call into devlink. Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Jakub Kicinski authored
Add devlink flash update command. Advanced NICs have firmware stored in flash and often cryptographically secured. Updating that flash is handled by management firmware. Ethtool has a flash update command which served us well, however, it has two shortcomings: - it takes rtnl_lock unnecessarily - really flash update has nothing to do with networking, so using a networking device as a handle is suboptimal, which leads us to the second one: - it requires a functioning netdev - in case device enters an error state and can't spawn a netdev (e.g. communication with the device fails) there is no netdev to use as a handle for flashing. Devlink already has the ability to report the firmware versions, now with the ability to update the firmware/flash we will be able to recover devices in bad state. To enable updates of sub-components of the FW allow passing component name. This name should correspond to one of the versions reported in devlink info. v1: - replace target id with component name (Jiri). Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: improve and use phy_resolve_aneg_linkmode Improve phy_resolve_aneg_linkmode and use it in genphy_read_status. ==================== Signed-off-by: -
Heiner Kallweit authored
Now that we have phy_resolve_aneg_linkmode() we can make genphy_read_status() much simpler. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
We have the settings array of modes which is sorted based on aneg priority. Instead of checking each mode manually let's simply iterate over the sorted settings. Signed-off-by:
-
Vlad Buslov authored
Check that filter is not NULL before passing it to tcf_walker->fn() callback in cls_cgroup_walk(). This can happen when cls_cgroup_change() failed to set first filter. Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
-
Vlad Buslov authored
Check that filter is not NULL before passing it to tcf_walker->fn() callback. This can happen when mall_change() failed to offload filter to hardware. Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex") Reported-by:
Ido Schimmel <idosch@mellanox.com> Tested-by:
-
Vlad Buslov authored
Some classifiers set arg->stop in their implementation of tp->walk() API when empty. Most of classifiers do not adhere to that convention. Do not set arg->stop in route4_walk() to unify tp->walk() behavior among classifier implementations. Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by:
-
Vlad Buslov authored
Some classifiers set arg->stop in their implementation of tp->walk() API when empty. Most of classifiers do not adhere to that convention. Do not set arg->stop in fw_walk() to unify tp->walk() behavior among classifier implementations. Fixes: ed76f5ed ("net: sched: protect filter_chain list with filter_chain_lock mutex") Signed-off-by:
-
Jann Horn authored
Use existing skb_put_data() and skb_trim() instead of open-coding them, with the skb_put_data() first so that logically, `skb` still contains the data to be copied in its data..tail area when skb_put_data() reads it. This change on its own is a cleanup, and it is also necessary for potential future integration of skbuffs with things like KASAN. Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
-
Vadim Pasternak authored
Add a dedicated thermal zone for each QSFP/SFP module. The current temperature is obtained from the module's temperature sensor and the trip points are set based on the warning and critical thresholds read from the module. A cooling device (fan) is bound to all the thermal zones. The thermal zone governor is set to user space in order to avoid collisions between thermal zones. For example, one thermal zone might want to increase the speed of the fan, whereas another one would like to decrease it. Deferring this decision to user space allows the user to the take the most suitable decision. Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
-
David S. Miller authored
Roopa Prabhu says: ==================== tracepoints in neighbor subsystem Roopa Prabhu (2): trace: events: add a few neigh tracepoints neigh: hook tracepoints in neigh update code ==================== Signed-off-by: -
Roopa Prabhu authored
hook tracepoints at the end of functions that update a neigh entry. neigh_update gets an additional tracepoint to trace the update flags and old and new neigh states. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Roopa Prabhu authored
The goal here is to trace neigh state changes covering all possible neigh update paths. Plus have a specific trace point in neigh_update to cover flags sent to neigh_update. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: add and use genphy_c45_an_config_an This series adds genphy_c45_an_config_an() and uses it in the marvell10g diver. In addition patch 4 aligns the aneg configuration with what is done in genphy_config_aneg(). v2: - in patch 2 changed function name to genphy_c45_an_config_aneg - in patch 3 add a comment regarding 1000BaseT vendor registers v3: - rebase patch 3 ==================== Signed-off-by: -
Heiner Kallweit authored
Even if the advertisement registers content didn't change, we may have just switched to aneg, and therefore have to trigger an aneg restart. This matches the behavior of genphy_config_aneg(). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
Use new function genphy_c45_config_aneg() in mv3310_config_aneg(). v2: - add a comment regarding 1000BaseT vendor registers v3: - rebased Signed-off-by:
-
Andrew Lunn authored
C45 configuration of 10/100 and multi-giga bit auto negotiation advertisement is standardized. Configuration of 1000Base-T however appears to be vendor specific. Move the generic code out of the Marvell driver into the common phy-c45.c file. v2: - change function name to genphy_c45_an_config_aneg Signed-off-by:
-
Heiner Kallweit authored
Add a helper linkmode_adv_to_mii_10gbt_adv_t(), similar to linkmode_adv_to_mii_adv_t. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-02-16 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong. 2) test all bpf progs in alu32 mode, from Jiong. 3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin. 4) support for IP encap in lwt bpf progs, from Peter. 5) remove XDP_QUERY_XSK_UMEM dead code, from Jan. ==================== Signed-off-by: -
Andrii Nakryiko authored
While it's understandable why kernel limits number of BTF types to 65535 and size of string section to 64KB, in libbpf as user-space library it's too restrictive. E.g., pahole converting DWARF to BTF type information for Linux kernel generates more than 3 million BTF types and more than 3MB of strings, before deduplication. So to allow btf__dedup() to do its work, we need to be able to load bigger BTF sections using btf__new(). Singed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org>
-
Peter Oskolkov authored
As requested by David Ahern: - add negative tests (no routes, explicitly unreachable destinations) to exercize error handling code paths; - do not exit on test failures, but instead print a summary of passed/failed tests at the end. Future patches will add TSO and VRF tests. Signed-off-by:
Peter Oskolkov <posk@google.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Alexandre Torgue authored
In dwmac4_wrback_get_rx_timestamp_status we looking for a RX timestamp. For that receive descriptors are handled and so we should use defines related to receive descriptors. It'll no change the functional behavior as RDES3_RDES1_VALID=TDES3_RS1V=BIT(26) but it makes code easier to read. Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Dan Carpenter authored
It's confusing to call PTR_ERR(v). The PTR_ERR() function is basically a fancy cast to long so it makes you wonder, was IS_ERR() intended? But that doesn't make sense because vcc_walk() doesn't return error pointers. This patch doesn't affect runtime, it's just a cleanup. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Guillaume Nault authored
SO_SNDBUF and SO_RCVBUF (and their *BUFFORCE version) may overflow or underflow their input value. This patch aims at providing explicit handling of these extreme cases, to get a clear behaviour even with values bigger than INT_MAX / 2 or lower than INT_MIN / 2. For simplicity, only SO_SNDBUF and SO_SNDBUFFORCE are described here, but the same explanation and fix apply to SO_RCVBUF and SO_RCVBUFFORCE (with 'SNDBUF' replaced by 'RCVBUF' and 'wmem_max' by 'rmem_max'). Overflow of positive values =========================== When handling SO_SNDBUF or SO_SNDBUFFORCE, if 'val' exceeds INT_MAX / 2, the buffer size is set to its minimum value because 'val * 2' overflows, and max_t() considers that it's smaller than SOCK_MIN_SNDBUF. For SO_SNDBUF, this can only happen with net.core.wmem_max > INT_MAX / 2. SO_SNDBUF and SO_SNDBUFFORCE are actually designed to let users probe for the maximum buffer size by setting an arbitrary large number that gets capped to the maximum allowed/possible size. Having the upper half of the positive integer space to potentially reduce the buffer size to its minimum value defeats this purpose. This patch caps the base value to INT_MAX / 2, so that bigger values don't overflow and keep setting the buffer size to its maximum. Underflow of negative values ============================ For negative numbers, SO_SNDBUF always considers them bigger than net.core.wmem_max, which is bounded by [SOCK_MIN_SNDBUF, INT_MAX]. Therefore such values are set to net.core.wmem_max and we're back to the behaviour of positive integers described above (return maximum buffer size if wmem_max <= INT_MAX / 2, return SOCK_MIN_SNDBUF otherwise). However, SO_SNDBUFFORCE behaves differently. The user value is directly multiplied by two and compared with SOCK_MIN_SNDBUF. If 'val * 2' doesn't underflow or if it underflows to a value smaller than SOCK_MIN_SNDBUF then buffer size is set to its minimum value. Otherwise the buffer size is set to the underflowed value. This patch treats negative values passed to SO_SNDBUFFORCE as null, to prevent underflows. Therefore negative values now always set the buffer size to its minimum value. Even though SO_SNDBUF behaves inconsistently by setting buffer size to the maximum value when passed a negative number, no attempt is made to modify this behaviour. There may exist some programs that rely on using negative numbers to set the maximum buffer size. Avoiding overflows because of extreme net.core.wmem_max values is the most we can do here. Summary of altered behaviours ============================= val : user-space value passed to setsockopt() val_uf : the underflowed value resulting from doubling val when val < INT_MIN / 2 wmem_max : short for net.core.wmem_max val_cap : min(val, wmem_max) min_len : minimal buffer length (that is, SOCK_MIN_SNDBUF) max_len : maximal possible buffer length, regardless of wmem_max (that is, INT_MAX - 1) ^^^^ : altered behaviour SO_SNDBUF: +-------------------------+-------------+------------+----------------+ | CONDITION | OLD RESULT | NEW RESULT | COMMENT | +-------------------------+-------------+------------+----------------+ | val < 0 && | | | No overflow, | | wmem_max <= INT_MAX/2 | wmem_max*2 | wmem_max*2 | keep original | | | | | behaviour | +-------------------------+-------------+------------+----------------+ | val < 0 && | | | Cap wmem_max | | INT_MAX/2 < wmem_max | min_len | max_len | to prevent | | | | ^^^^^^^ | overflow | +-------------------------+-------------+------------+----------------+ | 0 <= val <= min_len/2 | min_len | min_len | Ordinary case | +-------------------------+-------------+------------+----------------+ | min_len/2 < val && | val_cap*2 | val_cap*2 | Ordinary case | | val_cap <= INT_MAX/2 | | | | +-------------------------+-------------+------------+----------------+ | min_len < val && | | | Cap val_cap | | INT_MAX/2 < val_cap | min_len | max_len | again to | | (implies that | | ^^^^^^^ | prevent | | INT_MAX/2 < wmem_max) | | | overflow | +-------------------------+-------------+------------+----------------+ SO_SNDBUFFORCE: +------------------------------+---------+---------+------------------+ | CONDITION | BEFORE | AFTER | COMMENT | | | PATCH | PATCH | | +------------------------------+---------+---------+------------------+ | val < INT_MIN/2 && | min_len | min_len | Underflow with | | val_uf <= min_len | | | no consequence | +------------------------------+---------+---------+------------------+ | val < INT_MIN/2 && | val_uf | min_len | Set val to 0 to | | val_uf > min_len | | ^^^^^^^ | avoid underflow | +------------------------------+---------+---------+------------------+ | INT_MIN/2 <= val < 0 | min_len | min_len | No underflow | +------------------------------+---------+---------+------------------+ | 0 <= val <= min_len/2 | min_len | min_len | Ordinary case | +------------------------------+---------+---------+------------------+ | min_len/2 < val <= INT_MAX/2 | val*2 | val*2 | Ordinary case | +------------------------------+---------+---------+------------------+ | INT_MAX/2 < val | min_len | max_len | Cap val to | | | | ^^^^^^^ | prevent overflow | +------------------------------+---------+---------+------------------+ Signed-off-by:Guillaume Nault <gnault@redhat.com> Signed-off-by:
-
- 16 Feb, 2019 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Support Mellanox BlueField SmartNIC (mlx5-updates-2019-02-15) Bodong Wang says, BlueField device is a multi-core ARM processor in a highly integrated system on chip coupled with the ConnectX interconnect controller. BlueField device can be presented in one out of two modes: - SEPARATED_HOST: ARM processors as a separated and orthogonal host like any other external host in the multi-host virtualization model. - EMBEDDED_CPU: ARM processors as Embedded CPU (EC) and part of the external hosts virtualization model. While existing driver already supports the device on separated_host mode, this patch series focus on the functionalities of embedded_cpu mode. On embedded_cpu mode, BlueField device exposes regular network controller PCI function in the BlueField host(e.g, x86). However, a separate PCI function called Embedded CPU Physical Function(ECPF) is also added to the ARM host side, where standard Linux distributions is able to run on the ARM cores. Depends on the NV configuration from firmware, ECPF can be the e-switch manager and firmware pages supplier. If ECPF is configured as e-switch manager and page supplier, it will take over the responsibilities from the PF on BlueField host includes: - Owns, controls and manages all e-switch parts, and takes e-switch traffic by default. It also should perform ENABLE_HCA for the host PF just like a PF does for its VFs. - Provides and manages the ICM host memory required for the HCA to store various contexts for itself, the PF and VFs belong the e-switch it manages. The PF on BlueField host side is still responsible for: - Control its own permanent MAC. - PCI and SRIOV configurations and perform ENABLE_HCA for its VFs. The ECPF can also retrieve information about the external host it controls, like host identifier, PCI BDF and number of virtual functions. As these parameters may be changed dynamically, an event will be triggered to the driver on ECPF side. ==================== Signed-off-by: -
Alin Nastac authored
When enabled, the sip_external_media logic will leave SDP payload untouched when it detects that interface towards INVITEd party is the same with the one towards media endpoint. The typical scenario for this logic is when a LAN SIP agent has more than one IP address (uses a different address for media streams than the one used on signalling stream) and it also forwards calls to a voice mailbox located on the WAN side. In such case sip_direct_media must be disabled (so normal calls could be handled by the SIP helper), but media streams that are not traversing this router must also be excluded from address translation (e.g. call forwards). Signed-off-by:
Alin Nastac <alin.nastac@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Wei Yongjun authored
Fixes the following sparse warnings: net/ipv4/netfilter/ipt_CLUSTERIP.c:867:23: warning: symbol 'cip_netdev_notifier' was not declared. Should it be static? Fixes: 5a86d68b ("netfilter: ipt_CLUSTERIP: fix deadlock in netns exit routine") Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-02-15 please apply a few more qeth patches to net-next. Along with some smaller improvements, this revamps our code for the SW statistics that are exposed through ETHTOOL_GSTATS. ==================== Signed-off-by:
-
