- 14 Mar, 2014 30 commits
-
-
Mauro Carvalho Chehab authored
Exporting functions for hardware filter is a bad idea, as it breaks compilation if: CONFIG_DVB_USB_AF9035=y CONFIG_DVB_AF9033=m Because the PID filter function calls would be hardcoded at af9035. The same doesn't happen with af9033_attach() because the dvb_attach() doesn't hardcode it. Instead, it dynamically links it at runtime. However, calling dvb_attach() multiple times is problematic, as it increments module kref. So, the better is to pass one parameter for the af9033 module to fill the hardware filters, and then use it inside af9035. Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
PID filters are property of af9033 demod. Use PID filters from af9033 driver as it provides those now. Allow possible dual mode on USB 1.1 mode too as bandwidth could be just enough when filters are used on both frontends. Signed-off-by:
-
Antti Palosaari authored
Implement PID filter and export it via symbol. Signed-off-by:
-
Antti Palosaari authored
Do not use dynamic stack allocation. >> drivers/staging/media/rtl2832u_sdr/rtl2832_sdr.c:181:1: warning: 'rtl2832_sdr_wr' uses dynamic stack allocation [enabled by default] Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Antti Palosaari authored
All error/warnings: drivers/built-in.o: In function `e4000_set_params': >> e4000.c:(.text+0x1219a1b): undefined reference to `__umoddi3' Reported-by:
-
Frank Schaefer authored
In all cases, when the first capture is called, we need to call the code that unmutes the volume. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Hans Verkuil authored
Update the DocBook files accordingly. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Hans Verkuil authored
Be more specific with regards to how some of these fields are interpreted. In particular the height value and which fields can be set by the application. Signed-off-by:
-
Hans Verkuil authored
This example driver uses all the latest frameworks and can serve as a starting point for a new V4L2 PCI driver. Originally written for a presentation on how to use V4L2 frameworks during FOSDEM 2014. Signed-off-by:
-
James Hogan authored
The calculated values for the minlen and maxlen fields, which were rounded to multiples of 2 and clamped to a valid range, were left unused. Use them in the calculation of the register value rather than using the raw input minlen and maxlen. This fixes the following warning with a W=1 build: drivers/media/rc/img-ir/img-ir-hw.c In function ‘img_ir_free_timing’: drivers/media/rc/img-ir/img-ir-hw.c +228 :23: warning: variable ‘maxlen’ set but not used [-Wunused-but-set-variable] drivers/media/rc/img-ir/img-ir-hw.c +228 :15: warning: variable ‘minlen’ set but not used [-Wunused-but-set-variable] Reported-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
James Hogan authored
The JVC timings included timings intended for the secondary decoder (which matches messages with no leader), however they were in the wrong part of the timings structure, repeating s00 and s01 rather than being in s10 and s11. Distinct repeat timings can't be properly supported yet for JVC anyway since the scancode callback cannot determine which decoder matched the message, so for now remove these timings and don't bother to enable the secondary decoder. This fixes the following warnings with W=1: drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +76 :3: warning: (near initialization for ‘img_ir_jvc.timings.s00’) [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: initialized field overwritten [-Woverride-init] drivers/media/rc/img-ir/img-ir-jvc.c +81 :3: warning: (near initialization for ‘img_ir_jvc.timings.s01’) [-Woverride-init] Reported-by:
-
James Hogan authored
Fix a coccicheck warning in img-ir driver: drivers/media/rc/img-ir/img-ir-hw.c:500:2-3: Unneeded semicolon Signed-off-by:
-
Lad, Prabhakar authored
this patch fixes following build warning drivers/media/platform/davinci/vpbe_display.c: In function 'vpbe_start_streaming': drivers/media/platform/davinci/vpbe_display.c:344: warning: unused variable 'vpbe_dev' Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by:
-
Antti Palosaari authored
Realtek RTL2832 SDR driver. Currently in staging as SDR API is not ready. Signed-off-by:
-
Antti Palosaari authored
Clamp bandwidth to nearest legal value in automode in order to pass v4l2-compliance test. Reported-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Fix rtl2832_sdr driver v4l2-compliance issues. Signed-off-by:
-
Antti Palosaari authored
Rename some variables. Change error status checks from (ret < 0) to (ret). No actual functionality changes. Signed-off-by:
-
Antti Palosaari authored
That comes possible after driver was converted to kernel I2C model (I2C binding & proper I2C client with no gate control hack). All nasty low level I2C routines are now covered by regmap. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Gate control is now implemented by rtl2832 I2C adapter so we do not need proprietary DVB i2c_gate_ctrl() anymore. Signed-off-by:
-
Antti Palosaari authored
RTL2832 driver provides muxed I2C adapters for tuner bus I2C gate control. Pass those adapters to rtl2832_sdr and e4000 modules in order to get rid of proprietary DVB .i2c_gate_ctrl() callback use. Signed-off-by:
-
Antti Palosaari authored
We need depend on I2C_MUX as rtl2832 demod used requires it. All error/warnings: warning: (DVB_USB_RTL28XXU) selects DVB_RTL2832 which has unmet direct dependencies (MEDIA_SUPPORT && DVB_CORE && I2C && I2C_MUX) ERROR: "i2c_add_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! ERROR: "i2c_del_mux_adapter" [drivers/media/dvb-frontends/rtl2832.ko] undefined! Reported-by:
-
Antti Palosaari authored
Use break, not return, for every case. Signed-off-by:
-
Antti Palosaari authored
With that extension module it supports SDR. Signed-off-by:
-
Antti Palosaari authored
Optimize a little bit from data to text. Signed-off-by:
-
Antti Palosaari authored
E4000 tuner driver provides now some controls. Expose those to userland. Signed-off-by:
-
Antti Palosaari authored
Implement SDR driver for Realtek RTL2832U chip as a DVB extension module. SDR module is attached by DVB USB RTL28XXU driver as a DVB SEC (satellite equipment controller) module. Abusing unused SEC here has no harm as that is DVB-T only frontend. SDR functionality is provided by RTL2832 DVB-T demodulator. I suspect it is originally planned for DAB and FM, but it could be abused general SDR, due to modern silicon tuners that has wide frequency range and a lot of configurable parameters (filters, gains, ...). http://thread.gmane.org/gmane.linux.drivers.video-input-infrastructure/44461Signed-off-by:
-
Antti Palosaari authored
Implement PLL lock control to get PLL lock flag status from tuner synthesizer. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
There was 32-bit overflow on VCO frequency calculation which blocks tuning to 1073 - 1104 MHz. Use 64 bit number in order to avoid VCO frequency overflow. After that fix device in question tunes to following range: 60 - 1104 MHz 1250 - 2207 MHz Signed-off-by:
-
Antti Palosaari authored
Implement gain and bandwidth controls using v4l2 control framework. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Driver conversion from proprietary DVB tuner model to more general I2C driver model. Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
- 13 Mar, 2014 10 commits
-
-
Kees Cook authored
rc_map_get() takes a single string literal for the module to load, so make sure it cannot be used as a format string in the call to request_module(). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Hans Verkuil authored
The sizeimage is that of a single field, not that of a full frame. That makes no sense, and in fact all drivers supporting ALTERNATE will set sizeimage to that of a field. Signed-off-by:
-
Hans Verkuil authored
Be more specific as to who has to fill in each field/flag: the driver or the application. Signed-off-by:
-
Hans Verkuil authored
The code said for (i = 0; i > 30; ++i) instead of i < 30. Fix this and clean it up a bit at the same time. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Antti Palosaari authored
Rename v4l2_format_sdr to v4l2_sdr_format in order to keep it in line with other formats. Reported-by:
-
Antti Palosaari authored
Fix msi3101 driver v4l2-compliance issues. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
Fix msi001 driver v4l2-compliance issues. Cc: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Antti Palosaari authored
That value is coming from the user and we need only ensure it is reasonable. That was pointed by Hans when reviewing rtl2832_sdr driver. Signed-off-by:
-
Antti Palosaari authored
Mirics MSi2500 (MSi3101) SDR ADC + USB interface driver. Currently in staging as SDR API is not ready. Signed-off-by:
-
