- 07 Apr, 2020 5 commits
-
-
Long Li authored
CIFS uses pre-allocated crypto structures to calculate signatures for both incoming and outgoing packets. In this way it doesn't need to allocate crypto structures for every packet, but it requires a lock to prevent concurrent access to crypto structures. Remove the lock by allocating crypto structures on the fly for incoming packets. At the same time, we can still use pre-allocated crypto structures for outgoing packets, as they are already protected by transport lock srv_mutex. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
-
Long Li authored
cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending Recevie credits should be updated before sending the packet, not before a work is scheduled. Also, the value needs roll back if something fails and cannot send. Signed-off-by: Long Li <longli@microsoft.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Steve French <stfrench@microsoft.com>
-
Long Li authored
Sometimes the remote peer may return more send credits than the send queue depth. If all the send credits are used to post senasd, we may overflow the send queue. Fix this by checking the send queue size before posting a send. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
-
Long Li authored
As an optimization, SMBD tries to track two types of packets: packets with payload and without payload. There is no obvious benefit or performance gain to separately track two types of packets. Just treat them as pending packets and merge the tracking code. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
-
Aurelien Aptel authored
Fix tcon use-after-free and NULL ptr deref. Customer system crashes with the following kernel log: [462233.169868] CIFS VFS: Cancelling wait for mid 4894753 cmd: 14 => a QUERY DIR [462233.228045] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.305922] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.306205] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347060] CIFS VFS: cifs_put_smb_ses: Session Logoff failure rc=-4 [462233.347107] CIFS VFS: Close unmatched open [462233.347113] BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 ... [exception RIP: cifs_put_tcon+0xa0] (this is doing tcon->ses->server) #6 [...] smb2_cancelled_close_fid at ... [cifs] #7 [...] process_one_work at ... #8 [...] worker_thread at ... #9 [...] kthread at ... The most likely explanation we have is: * When we put the last reference of a tcon (refcount=0), we close the cached share root handle. * If closing a handle is interrupted, SMB2_close() will queue a SMB2_close() in a work thread. * The queued object keeps a tcon ref so we bump the tcon refcount, jumping from 0 to 1. * We reach the end of cifs_put_tcon(), we free the tcon object despite it now having a refcount of 1. * The queued work now runs, but the tcon, ses & server was freed in the meantime resulting in a crash. THREAD 1 ======== cifs_put_tcon => tcon refcount reach 0 SMB2_tdis close_shroot_lease close_shroot_lease_locked => if cached root has lease && refcount = 0 smb2_close_cached_fid => if cached root valid SMB2_close => retry close in a thread if interrupted smb2_handle_cancelled_close __smb2_handle_cancelled_close => !! tcon refcount bump 0 => 1 !! INIT_WORK(&cancelled->work, smb2_cancelled_close_fid); queue_work(cifsiod_wq, &cancelled->work) => queue work tconInfoFree(tcon); ==> freed! cifs_put_smb_ses(ses); ==> freed! THREAD 2 (workqueue) ======== smb2_cancelled_close_fid SMB2_close(0, cancelled->tcon, ...); => use-after-free of tcon cifs_put_tcon(cancelled->tcon); => tcon refcount reach 0 second time *CRASH* Fixes: d9191319 ("CIFS: Close cached root handle only if it has a lease") Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
-
- 31 Mar, 2020 25 commits
-
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs updates from Steve French: "First part of cifs/smb3 changes for merge window (others are still being tested). Various RDMA (smbdirect) fixes, addition of SMB3.1.1 POSIX support in readdir, 3 fixes for stable, and a fix for flock. Summary: New feature: - SMB3.1.1 POSIX support in readdir Fixes: - various RDMA (smbdirect) fixes - fix for flock - fallocate fix - some improved mount warnings - two timestamp related fixes - reconnect fix - three fixes for stable" * tag '5.7-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (28 commits) cifs: update internal module version number cifs: Allocate encryption header through kmalloc cifs: smbd: Check and extend sender credits in interrupt context cifs: smbd: Calculate the correct maximum packet size for segmented SMBDirect send/receive smb3: use SMB2_SIGNATURE_SIZE define CIFS: Fix bug which the return value by asynchronous read is error CIFS: check new file size when extending file by fallocate SMB3: Minor cleanup of protocol definitions SMB3: Additional compression structures SMB3: Add new compression flags cifs: smb2pdu.h: Replace zero-length array with flexible-array member cifs: clear PF_MEMALLOC before exiting demultiplex thread cifs: cifspdu.h: Replace zero-length array with flexible-array member CIFS: Warn less noisily on default mount fs/cifs: fix gcc warning in sid_to_id cifs: allow unlock flock and OFD lock across fork cifs: do d_move in rename cifs: add SMB2_open() arg to return POSIX data cifs: plumb smb2 POSIX dir enumeration cifs: add smb2 POSIX info level ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 updates from Bob Peterson: "We've got a lot of patches (39) for this merge window. Most of these patches are related to corruption that occurs when journals are replayed. For example: 1. A node fails while writing to the file system. 2. Other nodes use the metadata that was once used by the failed node. 3. When the node returns to the cluster, its journal is replayed, but the older metadata blocks overwrite the changes from step 2. Summary: - Fixed the recovery sequence to prevent corruption during journal replay. - Many bug fixes found during recovery testing. - New improved file system withdraw sequence. - Fixed how resource group buffers are managed. - Fixed how metadata revokes are tracked and written. - Improve processing of IO errors hit by daemons like logd and quotad. - Improved error checking in metadata writes. - Fixed how qadata quota data structures are managed" * tag 'gfs2-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (39 commits) gfs2: Fix oversight in gfs2_ail1_flush gfs2: change from write to read lock for sd_log_flush_lock in journal replay gfs2: instrumentation wrt ail1 stuck gfs2: don't lock sd_log_flush_lock in try_rgrp_unlink gfs2: Remove unnecessary gfs2_qa_{get,put} pairs gfs2: Split gfs2_rsqa_delete into gfs2_rs_delete and gfs2_qa_put gfs2: Change inode qa_data to allow multiple users gfs2: eliminate gfs2_rsqa_alloc in favor of gfs2_qa_alloc gfs2: Switch to list_{first,last}_entry gfs2: Clean up inode initialization and teardown gfs2: Additional information when gfs2_ail1_flush withdraws gfs2: leaf_dealloc needs to allocate one more revoke gfs2: allow journal replay to hold sd_log_flush_lock gfs2: don't allow releasepage to free bd still used for revokes gfs2: flesh out delayed withdraw for gfs2_log_flush gfs2: Do proper error checking for go_sync family of glops functions gfs2: Don't demote a glock until its revokes are written gfs2: drain the ail2 list after io errors gfs2: Withdraw in gfs2_ail1_flush if write_cache_pages fails gfs2: Do log_flush in gfs2_ail_empty_gl even if ail list is empty ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "A number of core changes that make things work better in general, code is simpler and cleaner. Core changes: - per-inode file extent tree, for in memory tracking of contiguous extent ranges to make sure i_size adjustments are accurate - tree root structures are protected by reference counts, replacing SRCU that did not cover some cases - leak detector for tree root structures - per-transaction pinned extent tracking - buffer heads are replaced by bios for super block access - speedup of extent back reference resolution, on an example test scenario the runtime of send went down from a hour to minutes - factor out locking scheme used for subvolume writer and NOCOW exclusion, abstracted as DREW lock, double reader-writer exclusion (allow either readers or writers) - cleanup and abstract extent allocation policies, preparation for zoned device support - make reflink/clone_range work on inline extents - add more cancellation point for relocation, improves long response from 'balance cancel' - add page migration callback for data pages - switch to guid for uuids, with additional cleanups of the interface - make ranged full fsyncs more efficient - removal of obsolete ioctl flag BTRFS_SUBVOL_CREATE_ASYNC - remove b-tree readahead from delayed refs paths, avoiding seek and read unnecessary blocks Features: - v2 of ioctl to delete subvolumes, allowing to delete by id and more future extensions Fixes: - fix qgroup rescan worker that could block umount - fix crash during unmount due to race with delayed inode workers - fix dellaloc flushing logic that could create unnecessary chunks under heavy load - fix missing file extent item for hole after ranged fsync - several fixes in relocation error handling Other: - more documentation of relocation, device replace, space reservations - many random cleanups" * tag 'for-5.7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (210 commits) btrfs: fix missing semaphore unlock in btrfs_sync_file btrfs: use nofs allocations for running delayed items btrfs: sysfs: Use scnprintf() instead of snprintf() btrfs: do not resolve backrefs for roots that are being deleted btrfs: track reloc roots based on their commit root bytenr btrfs: restart relocate_tree_blocks properly btrfs: reloc: reorder reservation before root selection btrfs: do not readahead in build_backref_tree btrfs: do not use readahead for running delayed refs btrfs: Remove async_transid from btrfs_mksubvol/create_subvol/create_snapshot btrfs: Remove transid argument from btrfs_ioctl_snap_create_transid btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support btrfs: kill the subvol_srcu btrfs: make btrfs_cleanup_fs_roots use the radix tree lock btrfs: don't take an extra root ref at allocation time btrfs: hold a ref on the root on the dead roots list btrfs: make inodes hold a ref on their roots btrfs: move the root freeing stuff into btrfs_put_root btrfs: move ino_cache_inode dropping out of btrfs_free_fs_root btrfs: make the extent buffer leak check per fs info ...
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds authored
Pull fscrypt updates from Eric Biggers: "Add an ioctl FS_IOC_GET_ENCRYPTION_NONCE which retrieves a file's encryption nonce. This makes it easier to write automated tests which verify that fscrypt is doing the encryption correctly" * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: ubifs: wire up FS_IOC_GET_ENCRYPTION_NONCE f2fs: wire up FS_IOC_GET_ENCRYPTION_NONCE ext4: wire up FS_IOC_GET_ENCRYPTION_NONCE fscrypt: add FS_IOC_GET_ENCRYPTION_NONCE ioctl
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 vmware updates from Ingo Molnar: "The main change in this tree is the addition of 'steal time clock support' for VMware guests" * 'x86-vmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vmware: Use bool type for vmw_sched_clock x86/vmware: Enable steal time accounting x86/vmware: Add steal time clock support for VMware guests x86/vmware: Remove vmware_sched_clock_setup() x86/vmware: Make vmware_select_hypercall() __init
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 mm updates from Ingo Molnar: "A handful of changes: - two memory encryption related fixes - don't display the kernel's virtual memory layout plaintext on 32-bit kernels either - two simplifications" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Remove the now redundant N_MEMORY check dma-mapping: Fix dma_pgprot() for unencrypted coherent pages x86: Don't let pgprot_modify() change the page encryption bit x86/mm/kmmio: Use this_cpu_ptr() instead get_cpu_var() for kmmio_ctx x86/mm/init/32: Stop printing the virtual memory layout
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull misc x86 updates from Ingo Molnar: - extend the decoder maps with CET instructions - fix !vDSO corner cases * 'x86-misc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/tests: Add CET instructions to the new instructions test x86/insn: Add Control-flow Enforcement (CET) instructions to the opcode map selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault selftests/x86/vdso: Fix no-vDSO segfaults
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fpu updates from Ingo Molnar: "Misc changes: - add a pkey sanity check - three commits to improve and future-proof xstate/xfeature handling some more" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pkeys: Add check for pkey "overflow" x86/fpu/xstate: Warn when checking alignment of disabled xfeatures x86/fpu/xstate: Fix XSAVES offsets in setup_xstate_comp() x86/fpu/xstate: Fix last_good_offset in setup_xstate_features()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cleanups from Ingo Molnar: "This topic tree contains more commits than usual: - most of it are uaccess cleanups/reorganization by Al - there's a bunch of prototype declaration (--Wmissing-prototypes) cleanups - misc other cleanups all around the map" * 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) x86/mm/set_memory: Fix -Wmissing-prototypes warnings x86/efi: Add a prototype for efi_arch_mem_reserve() x86/mm: Mark setup_emu2phys_nid() static x86/jump_label: Move 'inline' keyword placement x86/platform/uv: Add a missing prototype for uv_bau_message_interrupt() kill uaccess_try() x86: unsafe_put-style macro for sigmask x86: x32_setup_rt_frame(): consolidate uaccess areas x86: __setup_rt_frame(): consolidate uaccess areas x86: __setup_frame(): consolidate uaccess areas x86: setup_sigcontext(): list user_access_{begin,end}() into callers x86: get rid of put_user_try in __setup_rt_frame() (both 32bit and 64bit) x86: ia32_setup_rt_frame(): consolidate uaccess areas x86: ia32_setup_frame(): consolidate uaccess areas x86: ia32_setup_sigcontext(): lift user_access_{begin,end}() into the callers x86/alternatives: Mark text_poke_loc_init() static x86/cpu: Fix a -Wmissing-prototypes warning for init_ia32_feat_ctl() x86/mm: Drop pud_mknotpresent() x86: Replace setup_irq() by request_irq() x86/configs: Slightly reduce defconfigs ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 build updates from Ingo Molnar: "A handful of updates: two linker script cleanups and a stock defconfig+allmodconfig bootability fix" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Discard .note.gnu.property sections in vDSO x86, vmlinux.lds: Add RUNTIME_DISCARD_EXIT to generic DISCARDS x86/Kconfig: Make CMDLINE_OVERRIDE depend on non-empty CMDLINE
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 boot updates from Ingo Molnar: "Misc cleanups and small enhancements all around the map" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot/compressed: Fix debug_puthex() parameter type x86/setup: Fix static memory detection x86/vmlinux: Drop unneeded linker script discard of .eh_frame x86/*/Makefile: Use -fno-asynchronous-unwind-tables to suppress .eh_frame sections x86/boot/compressed: Remove .eh_frame section from bzImage x86/boot/compressed/64: Remove .bss/.pgtable from bzImage x86/boot/compressed/64: Use 32-bit (zero-extended) MOV for z_output_len x86/boot/compressed/64: Use LEA to initialize boot stack pointer
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
Pull microblaze updates from Michal Simek: - convert license headers to SPDX - cleanup header handling and use asm-generic one - get rid of earlyprintk residues - define barriers and use it in the code - get rid of setup_irq() for timer - various small addons and fixes * tag 'microblaze-v5.7-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Replace setup_irq() by request_irq() microblaze: Stop printing the virtual memory layout microblaze: Use asm generic cmpxchg.h for !SMP case microblaze: Define percpu sestion in linker file microblaze: Remove unused boot_cpuid variable microblaze: Add missing irqflags.h header microblaze: Add sync to tlb operations microblaze: Define microblaze barrier microblaze: Remove empty headers microblaze: Remove early printk setup microblaze: Remove architecture tlb.h and use generic one microblaze: Convert headers to SPDX license microblaze: Fix _reset() function microblaze: Kernel parameters should be parsed earlier
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull ia64 updates from Tony Luck: "Couple of cleanup patches" * tag 'please-pull-ia64_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: tty/serial: cleanup after ioc*_serial driver removal ia64: replace setup_irq() by request_irq()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS updates from Thomas Bogendoerfer: - loongson64 irq rework - dmi support loongson - replace setup_irq() by request_irq() - jazz cleanups - minor cleanups and fixes * tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits) MIPS: ralink: mt7621: Fix soc_device introduction MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3 MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC MAINTAINERS: Update Loongson64 entry MIPS: Loongson64: Load built-in dtbs MIPS: Loongson64: Add generic dts dt-bindings: mips: Add loongson boards MIPS: Loongson64: Drop legacy IRQ code dt-bindings: interrupt-controller: Add Loongson-3 HTPIC irqchip: Add driver for Loongson-3 HyperTransport PIC controller dt-bindings: interrupt-controller: Add Loongson LIOINTC irqchip: loongson-liointc: Workaround LPC IRQ Errata irqchip: Add driver for Loongson I/O Local Interrupt Controller docs: mips: remove no longer needed au1xxx_ide.rst documentation MIPS: Alchemy: remove no longer used au1xxx_ide.h header ide: remove no longer used au1xxx-ide driver MIPS: Add support for Desktop Management Interface (DMI) firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START MIPS: ralink: mt7621: introduce 'soc_device' initialization ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: - pagetable layout rewrite, to facilitate global READ_ONCE() rework - Zorro (Amiga) and DIO (HP 9000/300) bus cleanups - defconfig updates - minor cleanups and fixes * tag 'm68k-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (23 commits) m68k: defconfig: Update defconfigs for v5.6-rc4 zorro: Replace zero-length array with flexible-array member m68k: Switch to asm-generic/hardirq.h fbdev: c2p: Use BUILD_BUG() instead of custom solution dio: Remove unused dio_dev_driver() dio: Fix dio_bus_match() kerneldoc dio: Make dio_match_device() static zorro: Move zorro_bus_type to bus-private header file zorro: Remove unused zorro_dev_driver() zorro: Use zorro_match_device() helper in zorro_bus_match() zorro: Fix zorro_bus_match() kerneldoc zorro: Make zorro_match_device() static m68k: Fix Kconfig indentation m68k: mm: Change ColdFire pgtable_t m68k: mm: Fully initialize the page-table allocator m68k: mm: Extend table allocator for multiple sizes m68k: mm: Use table allocator for pgtables m68k: mm: Improve kernel_page_table() m68k: mm: Restructure Motorola MMU page-table layout m68k: mm: Move the pointer table allocator to motorola.c ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 timer updates from Thomas Gleixner: "A series of commits to make the MSR derived CPU and TSC frequency more accurate. It turned out that the frequency tables which have been taken from the SDM are inaccurate because the SDM provides truncated and rounded values, e.g. 83.3Mhz (83.3333...) or 116.7Mhz (116.6666...). This causes time drift in the range of ~1 second per hour (20-30 seconds per day). On some of these SoCs it's not possible to recalibrate the TSC because there is no reference (PIT, HPET) available. With some reverse engineering it was established that the possible frequencies are derived from the base clock with fixed multiplier / divider pairs. For the CPU models which have a known crystal frequency the kernel now uses multiplier / divider pairs which bring the frequencies closer to reality and fix the observed time drift issues" * tag 'x86-timers-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tsc_msr: Make MSR derived TSC frequency more accurate x86/tsc_msr: Fix MSR_FSB_FREQ mask for Cherry Trail devices x86/tsc_msr: Use named struct initializers
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 splitlock updates from Thomas Gleixner: "Support for 'split lock' detection: Atomic operations (lock prefixed instructions) which span two cache lines have to acquire the global bus lock. This is at least 1k cycles slower than an atomic operation within a cache line and disrupts performance on other cores. Aside of performance disruption this is a unpriviledged form of DoS. Some newer CPUs have the capability to raise an #AC trap when such an operation is attempted. The detection is by default enabled in warning mode which will warn once when a user space application is caught. A command line option allows to disable the detection or to select fatal mode which will terminate offending applications with SIGBUS" * tag 'x86-splitlock-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/split_lock: Avoid runtime reads of the TEST_CTRL MSR x86/split_lock: Rework the initialization flow of split lock detection x86/split_lock: Enable split lock detection by kernel
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 entry code updates from Thomas Gleixner: - Convert the 32bit syscalls to be pt_regs based which removes the requirement to push all 6 potential arguments onto the stack and consolidates the interface with the 64bit variant - The first small portion of the exception and syscall related entry code consolidation which aims to address the recently discovered issues vs. RCU, int3, NMI and some other exceptions which can interrupt any context. The bulk of the changes is still work in progress and aimed for 5.8. - A few lockdep namespace cleanups which have been applied into this branch to keep the prerequisites for the ongoing work confined. * tag 'x86-entry-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits) x86/entry: Fix build error x86 with !CONFIG_POSIX_TIMERS lockdep: Rename trace_{hard,soft}{irq_context,irqs_enabled}() lockdep: Rename trace_softirqs_{on,off}() lockdep: Rename trace_hardirq_{enter,exit}() x86/entry: Rename ___preempt_schedule x86: Remove unneeded includes x86/entry: Drop asmlinkage from syscalls x86/entry/32: Enable pt_regs based syscalls x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments x86/entry/32: Rename 32-bit specific syscalls x86/entry/32: Clean up syscall_32.tbl x86/entry: Remove ABI prefixes from functions in syscall tables x86/entry/64: Add __SYSCALL_COMMON() x86/entry: Remove syscall qualifier support x86/entry/64: Remove ptregs qualifier from syscall table x86/entry: Move max syscall number calculation to syscallhdr.sh x86/entry/64: Split X32 syscall table into its own file x86/entry/64: Move sys_ni_syscall stub to common.c x86/entry/64: Use syscall wrappers for x32_rt_sigreturn x86/entry: Refactor SYS_NI macros ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timekeeping and timer updates from Thomas Gleixner: "Core: - Consolidation of the vDSO build infrastructure to address the difficulties of cross-builds for ARM64 compat vDSO libraries by restricting the exposure of header content to the vDSO build. This is achieved by splitting out header content into separate headers. which contain only the minimaly required information which is necessary to build the vDSO. These new headers are included from the kernel headers and the vDSO specific files. - Enhancements to the generic vDSO library allowing more fine grained control over the compiled in code, further reducing architecture specific storage and preparing for adopting the generic library by PPC. - Cleanup and consolidation of the exit related code in posix CPU timers. - Small cleanups and enhancements here and there Drivers: - The obligatory new drivers: Ingenic JZ47xx and X1000 TCU support - Correct the clock rate of PIT64b global clock - setup_irq() cleanup - Preparation for PWM and suspend support for the TI DM timer - Expand the fttmr010 driver to support ast2600 systems - The usual small fixes, enhancements and cleanups all over the place" * tag 'timers-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (80 commits) Revert "clocksource/drivers/timer-probe: Avoid creating dead devices" vdso: Fix clocksource.h macro detection um: Fix header inclusion arm64: vdso32: Enable Clang Compilation lib/vdso: Enable common headers arm: vdso: Enable arm to use common headers x86/vdso: Enable x86 to use common headers mips: vdso: Enable mips to use common headers arm64: vdso32: Include common headers in the vdso library arm64: vdso: Include common headers in the vdso library arm64: Introduce asm/vdso/processor.h arm64: vdso32: Code clean up linux/elfnote.h: Replace elf.h with UAPI equivalent scripts: Fix the inclusion order in modpost common: Introduce processor.h linux/ktime.h: Extract common header for vDSO linux/jiffies.h: Extract common header for vDSO linux/time64.h: Extract common header for vDSO linux/time32.h: Extract common header for vDSO linux/time.h: Extract common header for vDSO ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull NOHZ update from Thomas Gleixner: "Remove TIF_NOHZ from three architectures These architectures use a static key to decide whether context tracking needs to be invoked and the TIF_NOHZ flag just causes a pointless slowpath execution for nothing" * tag 'timers-nohz-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64: Remove TIF_NOHZ arm: Remove TIF_NOHZ x86: Remove TIF_NOHZ context-tracking: Introduce CONFIG_HAVE_TIF_NOHZ x86/entry: Remove _TIF_NOHZ from _TIF_WORK_SYSCALL_ENTRY
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull core SMP updates from Thomas Gleixner: "CPU (hotplug) updates: - Support for locked CSD objects in smp_call_function_single_async() which allows to simplify callsites in the scheduler core and MIPS - Treewide consolidation of CPU hotplug functions which ensures the consistency between the sysfs interface and kernel state. The low level functions cpu_up/down() are now confined to the core code and not longer accessible from random code" * tag 'smp-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) cpu/hotplug: Ignore pm_wakeup_pending() for disable_nonboot_cpus() cpu/hotplug: Hide cpu_up/down() cpu/hotplug: Move bringup of secondary CPUs out of smp_init() torture: Replace cpu_up/down() with add/remove_cpu() firmware: psci: Replace cpu_up/down() with add/remove_cpu() xen/cpuhotplug: Replace cpu_up/down() with device_online/offline() parisc: Replace cpu_up/down() with add/remove_cpu() sparc: Replace cpu_up/down() with add/remove_cpu() powerpc: Replace cpu_up/down() with add/remove_cpu() x86/smp: Replace cpu_up/down() with add/remove_cpu() arm64: hibernate: Use bringup_hibernate_cpu() cpu/hotplug: Provide bringup_hibernate_cpu() arm64: Use reboot_cpu instead of hardconding it to 0 arm64: Don't use disable_nonboot_cpus() ARM: Use reboot_cpu instead of hardcoding it to 0 ARM: Don't use disable_nonboot_cpus() ia64: Replace cpu_down() with smp_shutdown_nonboot_cpus() cpu/hotplug: Create a new function to shutdown nonboot cpus cpu/hotplug: Add new {add,remove}_cpu() functions sched/core: Remove rq.hrtick_csd_pending ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Treewide: - Cleanup of setup_irq() which is not longer required because the memory allocator is available early. Most cleanup changes come through the various maintainer trees, so the final removal of setup_irq() is postponed towards the end of the merge window. Core: - Protection against unsafe invocation of interrupt handlers and unsafe interrupt injection including a fixup of the offending PCI/AER error injection mechanism. Invoking interrupt handlers from arbitrary contexts, i.e. outside of an actual interrupt, can cause inconsistent state on the fragile x86 interrupt affinity changing hardware trainwreck. Drivers: - Second wave of support for the new ARM GICv4.1 - Multi-instance support for Xilinx and PLIC interrupt controllers - CPU-Hotplug support for PLIC - The obligatory new driver for X1000 TCU - Enhancements, cleanups and fixes all over the place" * tag 'irq-core-2020-03-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits) unicore32: Replace setup_irq() by request_irq() sh: Replace setup_irq() by request_irq() hexagon: Replace setup_irq() by request_irq() c6x: Replace setup_irq() by request_irq() alpha: Replace setup_irq() by request_irq() irqchip/gic-v4.1: Eagerly vmap vPEs irqchip/gic-v4.1: Add VSGI property setup irqchip/gic-v4.1: Add VSGI allocation/teardown irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction layer irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks irqchip/gic-v4.1: Add initial SGI configuration irqchip/gic-v4.1: Plumb skeletal VSGI irqchip irqchip/stm32: Retrigger both in eoi and unmask callbacks irqchip/gic-v3: Move irq_domain_update_bus_token to after checking for NULL domain irqchip/xilinx: Do not call irq_set_default_host() irqchip/xilinx: Enable generic irq multi handler irqchip/xilinx: Fill error code when irq domain registration fails irqchip/xilinx: Add support for multiple instances ...
-
Randy Dunlap authored
There's a semantic conflict in the Octeon staging network driver, which used the skb_reset_tc() function to reset skb state when re-using an skb. But that inline helper function was removed in mainline by commit 2c64605b ("net: Fix CONFIG_NET_CLS_ACT=n and CONFIG_NFT_FWD_NETDEV={y, m} build"). Fix it by using skb_reset_redirect() instead. Also move it out of the This code path only ends up triggering if REUSE_SKBUFFS_WITHOUT_FREE is enabled, which in turn only happens if you don't have CONFIG_NETFILTER configured. Which was how this wasn't caught by the usual allmodconfig builds. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Various NUMA scheduling updates: harmonize the load-balancer and NUMA placement logic to not work against each other. The intended result is better locality, better utilization and fewer migrations. - Introduce Thermal Pressure tracking and optimizations, to improve task placement on thermally overloaded systems. - Implement frequency invariant scheduler accounting on (some) x86 CPUs. This is done by observing and sampling the 'recent' CPU frequency average at ~tick boundaries. The CPU provides this data via the APERF/MPERF MSRs. This hopefully makes our capacity estimates more precise and keeps tasks on the same CPU better even if it might seem overloaded at a lower momentary frequency. (As usual, turbo mode is a complication that we resolve by observing the maximum frequency and renormalizing to it.) - Add asymmetric CPU capacity wakeup scan to improve capacity utilization on asymmetric topologies. (big.LITTLE systems) - PSI fixes and optimizations. - RT scheduling capacity awareness fixes & improvements. - Optimize the CONFIG_RT_GROUP_SCHED constraints code. - Misc fixes, cleanups and optimizations - see the changelog for details" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits) threads: Update PID limit comment according to futex UAPI change sched/fair: Fix condition of avg_load calculation sched/rt: cpupri_find: Trigger a full search as fallback kthread: Do not preempt current task if it is going to call schedule() sched/fair: Improve spreading of utilization sched: Avoid scale real weight down to zero psi: Move PF_MEMSTALL out of task->flags MAINTAINERS: Add maintenance information for psi psi: Optimize switching tasks inside shared cgroups psi: Fix cpu.pressure for cpu.max and competing cgroups sched/core: Distribute tasks within affinity masks sched/fair: Fix enqueue_task_fair warning thermal/cpu-cooling, sched/core: Move the arch_set_thermal_pressure() API to generic scheduler code sched/rt: Remove unnecessary push for unfit tasks sched/rt: Allow pulling unfitting task sched/rt: Optimize cpupri_find() on non-heterogenous systems sched/rt: Re-instate old behavior in select_task_rq_rt() sched/rt: cpupri_find: Implement fallback mechanism for !fit case sched/fair: Fix reordering of enqueue/dequeue_task_fair() sched/fair: Fix runnable_avg for throttled cfs ...
-
- 30 Mar, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf updates from Ingo Molnar: "The main changes in this cycle were: Kernel side changes: - A couple of x86/cpu cleanups and changes were grandfathered in due to patch dependencies. These clean up the set of CPU model/family matching macros with a consistent namespace and C99 initializer style. - A bunch of updates to various low level PMU drivers: * AMD Family 19h L3 uncore PMU * Intel Tiger Lake uncore support * misc fixes to LBR TOS sampling - optprobe fixes - perf/cgroup: optimize cgroup event sched-in processing - misc cleanups and fixes Tooling side changes are to: - perf {annotate,expr,record,report,stat,test} - perl scripting - libapi, libperf and libtraceevent - vendor events on Intel and S390, ARM cs-etm - Intel PT updates - Documentation changes and updates to core facilities - misc cleanups, fixes and other enhancements" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (89 commits) cpufreq/intel_pstate: Fix wrong macro conversion x86/cpu: Cleanup the now unused CPU match macros hwrng: via_rng: Convert to new X86 CPU match macros crypto: Convert to new CPU match macros ASoC: Intel: Convert to new X86 CPU match macros powercap/intel_rapl: Convert to new X86 CPU match macros PCI: intel-mid: Convert to new X86 CPU match macros mmc: sdhci-acpi: Convert to new X86 CPU match macros intel_idle: Convert to new X86 CPU match macros extcon: axp288: Convert to new X86 CPU match macros thermal: Convert to new X86 CPU match macros hwmon: Convert to new X86 CPU match macros platform/x86: Convert to new CPU match macros EDAC: Convert to new X86 CPU match macros cpufreq: Convert to new X86 CPU match macros ACPI: Convert to new X86 CPU match macros x86/platform: Convert to new CPU match macros x86/kernel: Convert to new CPU match macros x86/kvm: Convert to new CPU match macros x86/perf/events: Convert to new CPU match macros ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons: - The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol. - Preparatory work for RISC-V EFI support. The main changes are: - Boot time GDT handling changes - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. - Changes to load device firmware from EFI boot service memory regions - Various documentation updates and minor code cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - Make kfree_rcu() use kfree_bulk() for added performance - RCU updates - Callback-overload handling updates - Tasks-RCU KCSAN and sparse updates - Locking torture test and RCU torture test updates - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Make rcu_barrier() account for offline no-CBs CPUs rcu: Mark rcu_state.gp_seq to detect concurrent writes Documentation/memory-barriers: Fix typos doc: Add rcutorture scripting to torture.txt doc/RCU/rcu: Use https instead of http if possible doc/RCU/rcu: Use absolute paths for non-rst files doc/RCU/rcu: Use ':ref:' for links to other docs doc/RCU/listRCU: Update example function name doc/RCU/listRCU: Fix typos in a example code snippets doc/RCU/Design: Remove remaining HTML tags in ReST files doc: Add some more RCU list patterns in the kernel rcutorture: Set KCSAN Kconfig options to detect more data races rcutorture: Manually clean up after rcu_barrier() failure rcutorture: Make rcu_torture_barrier_cbs() post from corresponding CPU rcuperf: Measure memory footprint during kfree_rcu() test rcutorture: Annotation lockless accesses to rcu_torture_current rcutorture: Add READ_ONCE() to rcu_torture_count and rcu_torture_batch rcutorture: Fix stray access to rcu_fwd_cb_nodelay rcutorture: Fix rcu_torture_one_read()/rcu_torture_writer() data race rcutorture: Make kvm-find-errors.sh abort on bad directory ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull objtool updates from Ingo Molnar: "The biggest changes in this cycle were the vmlinux.o optimizations by Peter Zijlstra, which are preparatory and optimization work to run objtool against the much richer vmlinux.o object file, to perform new, whole-program section based logic. That work exposed a handful of problems with the existing code, which fixes and optimizations are merged here. The complete 'vmlinux.o and noinstr' work is still work in progress, targeted for v5.8. There's also assorted fixes and enhancements from Josh Poimboeuf. In particular I'd like to draw attention to commit 644592d3, which turns fatal objtool errors into failed kernel builds. This behavior is IMO now justified on multiple grounds (it's easy currently to not notice an essentially corrupted kernel build), and the commit has been in -next testing for several weeks, but there could still be build failures with old or weird toolchains. Should that be widespread or high profile enough then I'd suggest a quick revert, to not hold up the merge window" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) objtool: Re-arrange validate_functions() objtool: Optimize find_rela_by_dest_range() objtool: Delete cleanup() objtool: Optimize read_sections() objtool: Optimize find_symbol_by_name() objtool: Resize insn_hash objtool: Rename find_containing_func() objtool: Optimize find_symbol_*() and read_symbols() objtool: Optimize find_section_by_name() objtool: Optimize find_section_by_index() objtool: Add a statistics mode objtool: Optimize find_symbol_by_index() x86/kexec: Make relocate_kernel_64.S objtool clean x86/kexec: Use RIP relative addressing objtool: Rename func_for_each_insn_all() objtool: Rename func_for_each_insn() objtool: Introduce validate_return() objtool: Improve call destination function detection objtool: Fix clang switch table edge case objtool: Add relocation check for alternative sections ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull PNP subsystem updates from Rafael Wysocki: - Update MAINTAINERS to cover include/linux/pnp.h and add the linux-acpi list to the PNP entry in it - add the const modifier to the name field definition in struct pnp_driver - drop a pointer case in the RTC CMOS driver that has become redundant All by Corentin Labbe. * tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: Add linux-acpi list to PNP rtc: cmos: remove useless cast for driver_name PNP: constify driver name PNP: add missing include/linux/pnp.h to MAINTAINERS
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI updates from Rafael Wysocki: - Update the ACPICA code in the kernel to the 20200214 upstream release including: * Fix to re-enable the sleep button after wakeup (Anchal Agarwal). * Fixes for mistakes in comments and typos (Bob Moore). * ASL-ASL+ converter updates (Erik Kaneda). * Type casting cleanups (Sven Barth). - Clean up the intialization of the EC driver and eliminate some dead code from it (Rafael Wysocki). - Clean up the quirk tables in the AC and battery drivers (Hans de Goede). - Fix the global lock handling on x86 to ignore unspecified bit positions in the global lock field (Jan Engelhardt). - Add a new "tiny" driver for ACPI button devices exposed by VMs to guest kernels to send signals directly to init (Josh Triplett). - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung). - Make the ACPI PCI host bridge and fan drivers use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Clean up assorted pieces of code: * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan). * Drop unneeded variable initialization (Colin Ian King). * Add missing __acquires/__releases annotations (Jules Irenge). * Replace list_for_each_safe() with list_for_each_entry_safe() (chenqiwu)" * tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits) ACPICA: Update version to 20200214 ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow ACPI: fan: Use scnprintf() for avoiding potential buffer overflow ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code acpi/x86: ignore unspecified bit positions in the ACPI global lock field acpi/x86: add a kernel parameter to disable ACPI BGRT x86/acpi: make "asmlinkage" part first thing in the function definition ACPI: list_for_each_safe() -> list_for_each_entry_safe() ACPI: video: remove redundant assignments to variable result ACPI: OSL: Add missing __acquires/__releases annotations ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management updates from Rafael Wysocki: "These clean up and rework the PM QoS API, address a suspend-to-idle wakeup regression on some ACPI-based platforms, clean up and extend a few cpuidle drivers, update multiple cpufreq drivers and cpufreq documentation, and fix a number of issues in devfreq and several other things all over. Specifics: - Clean up and rework the PM QoS API to simplify the code and reduce the size of it (Rafael Wysocki). - Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and similar platforms where the USB plug/unplug events are handled by the EC (Rafael Wysocki). - CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki, Ulf Hansson). - Extend the haltpoll cpuidle driver so that it can be forced to run on some systems where it refused to load (Maciej Szmigiero). - Convert several cpufreq documents to the .rst format and move the legacy driver documentation into one common file (Mauro Carvalho Chehab, Rafael Wysocki). - Update several cpufreq drivers: * Extend and fix the imx-cpufreq-dt driver (Anson Huang). * Improve the -EPROBE_DEFER handling and fix unwanted CPU overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang, Christoph Niedermaier). * Add support for Krait based SoCs to the qcom driver (Ansuel Smith). * Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla). * Add platform specific intermediate callbacks support to cpufreq-dt and update the imx6q driver (Peng Fan). * Simplify and consolidate some pieces of the intel_pstate driver and update its documentation (Rafael Wysocki, Alex Hung). - Fix several devfreq issues: * Remove unneeded extern keyword from a devfreq header file and use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of DEVFREQ_GOV_INTERNAL (Chanwoo Choi). * Fix the handling of dev_pm_qos_remove_request() result (Leonard Crestez). * Use constant name for userspace governor (Pierre Kuo). * Get rid of doc warnings and fix a typo (Christophe JAILLET). - Use built-in RCU list checking in some places in the PM core to avoid false-positive RCU usage warnings (Madhuparna Bhowmik). - Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM QoS routines (Qian Cai). - Fix removal of wakeup sources to avoid NULL pointer dereferences in a corner case (Neeraj Upadhyay). - Clean up the handling of hibernate compat ioctls and fix the related documentation (Eric Biggers). - Update the idle_inject power capping driver to use variable-length arrays instead of zero-length arrays (Gustavo Silva). - Fix list format in a PM QoS document (Randy Dunlap). - Make the cpufreq stats module use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus). - Allow no domain-idle-states DT property in generic PM domains (Ulf Hansson). - Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits) cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer Documentation: intel_pstate: update links for references ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/miscLinus Torvalds authored
Pull spi and regulator updates from Mark Brown: "At one point in the release cycle I managed to fat finger things and apply some SPI fixes onto a regulator branch and merge that into the SPI tree, then pull in a change shared with the MTD tree moving the Mediatek quadspi driver over to become the Mediatek spi-nor driver in the SPI tree. This has made a mess which I only just noticed while preparing this and I can't see a sensible way to unpick things due to other subsequent merge commits especially the pull from MTD so it looks like the most sensible thing to do is give up and combine the two pull requests. Fortunately both subsystems were fairly quiet this cycle, the highlights are: regulator: - Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869 and Qualcomm PMI8994 and SMB208. SPI: - Lots of enhancements for spi-fsl-dspi, including XSPI mode support, from Vladimir Oltean. - Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and Qualcomm Atheros AR934x/QCA95xx" * tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits) spi: efm32: Convert to use GPIO descriptors regulator: qcom_smd: Add pmi8994 regulator support regulator: da9063: Fix get_mode() functions to read sleep field spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member spi: spi-s3c24xx: Replace zero-length array with flexible-array member spi: stm32: Fix comments compilation warnings spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses spi: spi-fsl-dspi: Add support for LS1028A spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR regulator: driver.h: fix regulator_map_* function names regulator: da9063: fix suspend spi: mxs: Drop GPIO includes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmapLinus Torvalds authored
Pull regma: update from Mark Brown: "Only one small documentation fix for regmap this time around" * tag 'regmap-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: wrong descriptions in regmap_range_cfg
-