When tc actions are loaded as a module and no actions have been installed,
flushing them would result in actions removed from the memory, but modules
reference count not being decremented, so that the modules would not be
unloaded.

Following is example with GACT action:

% sudo modprobe act_gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions ls action gact
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  1
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  2
% sudo rmmod act_gact
rmmod: ERROR: Module act_gact is in use
....

After the fix:
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions add action pass index 1
% sudo tc actions add action pass index 2
% sudo tc actions add action pass index 3
% lsmod
Module                  Size  Used by
act_gact               16384  3
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
%
% sudo tc actions flush action gact
% lsmod
Module                  Size  Used by
act_gact               16384  0
% sudo rmmod act_gact
% lsmod
Module                  Size  Used by
%

Fixes: f97017cd ("net-sched: Fix actions flushing")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This allows to enable and run the accompanying test (test_parman)
without dependencies on other users of parman.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5e1859fb ("ipv4: ipmr: various fixes and cleanups") fixed
the issue for ipv4 ipmr:

  ip_mroute_setsockopt() & ip_mroute_getsockopt() should not
  access/set raw_sk(sk)->ipmr_table before making sure the socket
  is a raw socket, and protocol is IGMP

The same fix should be done for ipv6 ipmr as well.

This patch can fix the panic caused by overwriting the same offset
as ipmr_table as in raw_sk(sk) when accessing other type's socket
by ip_mroute_setsockopt().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit b8607805 ("sctp: not copying duplicate addrs to the assoc's
bind address list") tried to check for duplicate address before copying
to asoc's bind_addr list from global addr list.

But all the addrs' sin_ports in global addr list are 0 while the addrs'
sin_ports are bp->port in asoc's bind_addr list. It means even if it's
a duplicate address, af->cmp_addr will still return 0 as the their
sin_ports are different.

This patch is to fix it by setting the sin_port for addr param with
bp->port before comparing the addrs.

Fixes: b8607805 ("sctp: not copying duplicate addrs to the assoc's bind address list")
Reported-by: Wei Chen <weichen@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cited commit makes a great job of finding optimal shift/multiplier
values assuming a 10 seconds wrap around, but forgot to change the
overflow_period computation.

It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms,
which is silly.

Lets simply use 5 seconds, no need to recompute this, given how it is
supposed to work.

Later, we will use a timer instead of a work queue, since the new RX
allocation schem will no longer need mlx4_en_recover_from_oom() and the
service_task firing every 250 ms.

Fixes: 31c128b6 ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit fix the typo argumnet/argument
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This commit fix the typo argumnet/argument
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Restore the lost masking of TOS in input route code to
allow ip rules to match it properly.

Problem [1] noticed by Shmulik Ladkani <shmulik.ladkani@gmail.com>

[1] http://marc.info/?t=137331755300040&r=1&w=2

Fixes: 89aef892 ("ipv4: Delete routing cache.")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid matching of random stack value for uid when rules
are looked up on input route or when RP filter is used.
Problem should affect only setups that use ip rules with
uid range.

Fixes: 622ec2c9 ("net: core: add UID to flows, rules, and routes")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

trivial fix to spelling mistake in pr_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With gcc-4.1.2 and -Os:

    drivers/net/ethernet/apm/xgene/xgene_enet_main.c: In function ‘xgene_enet_start_xmit’:
    drivers/net/ethernet/apm/xgene/xgene_enet_main.c:297: warning: ‘mss_index’ may be used uninitialized in this function

Using a separate variable to track success may confuse the compiler.
Preinitialize mss_index with -EBUSY and check for negative error values
instead to kill the warning.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the function register_netdevice_notifier fails, the memory
allocated by kmem_cache_create should be freed by the function
kmem_cache_destroy.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using IPv6 transport and a default dst, a pointer to the configured
source address is passed into the route lookup. If no source address is
configured, then the value is overwritten.

IPv6 route lookup ignores egress ifindex match if the source address is set,
so if egress ifindex match is desired, the source address must be passed
as any. The overwrite breaks this for subsequent lookups.

Avoid this by copying the configured address to an existing stack variable
and pass a pointer to that instead.

Fixes: 272d96a5 ("net: vxlan: lwt: Use source ip address during route lookup.")
Signed-off-by: Brian Russell <brussell@brocade.com>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Align vti6 with vti by returning GRE_KEY flag. This enables iproute2
to display tunnel keys on "ip -6 tunnel show"
Signed-off-by: David Forster <dforster@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the rxrpc_read() function, which allows a user to read the contents of a
key, we miscalculate the expected length of an encoded rxkad token by not
taking into account the key length.  However, the data is stored later
anyway with an ENCODE_DATA() call - and an assertion failure then ensues
when the lengths are checked at the end.

Fix this by including the key length in the token size estimation.

The following assertion is produced:

Assertion failed - 384(0x180) == 380(0x17c) is false
------------[ cut here ]------------
kernel BUG at ../net/rxrpc/key.c:1221!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU: 2 PID: 2957 Comm: keyctl Not tainted 4.10.0-fscache+ #483
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
task: ffff8804013a8500 task.stack: ffff8804013ac000
RIP: 0010:rxrpc_read+0x10de/0x11b6
RSP: 0018:ffff8804013afe48 EFLAGS: 00010296
RAX: 000000000000003b RBX: 0000000000000003 RCX: 0000000000000000
RDX: 0000000000040001 RSI: 00000000000000f6 RDI: 0000000000000300
RBP: ffff8804013afed8 R08: 0000000000000001 R09: 0000000000000001
R10: ffff8804013afd90 R11: 0000000000000002 R12: 00005575f7c911b4
R13: 00005575f7c911b3 R14: 0000000000000157 R15: ffff880408a5d640
FS:  00007f8dfbc73700(0000) GS:ffff88041fb00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005575f7c91008 CR3: 000000040120a000 CR4: 00000000001406e0
Call Trace:
 keyctl_read_key+0xb6/0xd7
 SyS_keyctl+0x83/0xe7
 do_syscall_64+0x80/0x191
 entry_SYSCALL64_slow_path+0x25/0x25
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dan's static checker caught a potential code path in phy_state_machine() where
we were not checking phydev->drv which is in phy_aneg_done().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 25149ef9 ("net: phy: Check phydev->drv")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The incorrect check caused an off-by-one error: the maximum VID 0xffffff
was unusable.

Fixes: d342894c ("vxlan: virtual extensible lan")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function tipc_rcv() we initialize a couple of stack variables
from the message header before that same header has been validated.
In rare cases when the arriving header is non-linar, the validation
function itself may linearize the buffer by calling skb_may_pull(),
while the wrongly initialized stack fields are not updated accordingly.

We fix this in this commit.
Reported-by: Matthew Wong <mwong@sonusnet.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The stmmac driver have two methods for registers dumps: via ethtool and
at init (if NETIF_MSG_HW is enabled).

It is better to keep only one method, ethtool, since the other was ugly.

This patch convert all dump_regs() function from "printing regs" to
"fill the reg_space used by ethtool".
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/rds/ib.c:115:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values.

 NULL check before some freeing functions is not needed.

 Based on checkpatch warning
 "kfree(NULL) is safe this check is probably not required"
 and kfreeaddr.cocci by Julia Lawall.

Generated by: scripts/coccinelle/free/ifnullfree.cocci
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
attempted to avoid a BUG_ON call when the association being used for a
sendmsg() is blocked waiting for more sndbuf and another thread did a
peeloff operation on such asoc, moving it to another socket.

As Ben Hutchings noticed, then in such case it would return without
locking back the socket and would cause two unlocks in a row.

Further analysis also revealed that it could allow a double free if the
application managed to peeloff the asoc that is created during the
sendmsg call, because then sctp_sendmsg() would try to free the asoc
that was created only for that call.

This patch takes another approach. It will deny the peeloff operation
if there is a thread sleeping on the asoc, so this situation doesn't
exist anymore. This avoids the issues described above and also honors
the syscalls that are already being handled (it can be multiple sendmsg
calls).

Joint work with Xin Long.

Fixes: 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
Cc: Alexander Popov <alex.popov@linux.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull namespace updates from Eric Biederman:
 "There is a lot here. A lot of these changes result in subtle user
  visible differences in kernel behavior. I don't expect anything will
  care but I will revert/fix things immediately if any regressions show
  up.

  From Seth Forshee there is a continuation of the work to make the vfs
  ready for unpriviled mounts. We had thought the previous changes
  prevented the creation of files outside of s_user_ns of a filesystem,
  but it turns we missed the O_CREAT path. Ooops.

  Pavel Tikhomirov and Oleg Nesterov worked together to fix a long
  standing bug in the implemenation of PR_SET_CHILD_SUBREAPER where only
  children that are forked after the prctl are considered and not
  children forked before the prctl. The only known user of this prctl
  systemd forks all children after the prctl. So no userspace
  regressions will occur. Holding earlier forked children to the same
  rules as later forked children creates a semantic that is sane enough
  to allow checkpoing of processes that use this feature.

  There is a long delayed change by Nikolay Borisov to limit inotify
  instances inside a user namespace.

  Michael Kerrisk extends the API for files used to maniuplate
  namespaces with two new trivial ioctls to allow discovery of the
  hierachy and properties of namespaces.

  Konstantin Khlebnikov with the help of Al Viro adds code that when a
  network namespace exits purges it's sysctl entries from the dcache. As
  in some circumstances this could use a lot of memory.

  Vivek Goyal fixed a bug with stacked filesystems where the permissions
  on the wrong inode were being checked.

  I continue previous work on ptracing across exec. Allowing a file to
  be setuid across exec while being ptraced if the tracer has enough
  credentials in the user namespace, and if the process has CAP_SETUID
  in it's own namespace. Proc files for setuid or otherwise undumpable
  executables are now owned by the root in the user namespace of their
  mm. Allowing debugging of setuid applications in containers to work
  better.

  A bug I introduced with permission checking and automount is now
  fixed. The big change is to mark the mounts that the kernel initiates
  as a result of an automount. This allows the permission checks in sget
  to be safely suppressed for this kind of mount. As the permission
  check happened when the original filesystem was mounted.

  Finally a special case in the mount namespace is removed preventing
  unbounded chains in the mount hash table, and making the semantics
  simpler which benefits CRIU.

  The vfs fix along with related work in ima and evm I believe makes us
  ready to finish developing and merge fully unprivileged mounts of the
  fuse filesystem. The cleanups of the mount namespace makes discussing
  how to fix the worst case complexity of umount. The stacked filesystem
  fixes pave the way for adding multiple mappings for the filesystem
  uids so that efficient and safer containers can be implemented"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc/sysctl: Don't grab i_lock under sysctl_lock.
  vfs: Use upper filesystem inode in bprm_fill_uid()
  proc/sysctl: prune stale dentries during unregistering
  mnt: Tuck mounts under others instead of creating shadow/side mounts.
  prctl: propagate has_child_subreaper flag to every descendant
  introduce the walk_process_tree() helper
  nsfs: Add an ioctl() to return owner UID of a userns
  fs: Better permission checking for submounts
  exit: fix the setns() && PR_SET_CHILD_SUBREAPER interaction
  vfs: open() with O_CREAT should not create inodes with unknown ids
  nsfs: Add an ioctl() to return the namespace type
  proc: Better ownership of files for non-dumpable tasks in user namespaces
  exec: Remove LSM_UNSAFE_PTRACE_CAP
  exec: Test the ptracer's saved cred to see if the tracee can gain caps
  exec: Don't reset euid and egid when the tracee has CAP_SETUID
  inotify: Convert to using per-namespace limits

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for v4.11.

  Nothing too major, the tinydrm and mmu-less support should make
  writing smaller drivers easier for some of the simpler platforms, and
  there are a bunch of documentation updates.

  Intel grew displayport MST audio support which is hopefully useful to
  people, and FBC is on by default for GEN9+ (so people know where to
  look for regressions). AMDGPU has a lot of fixes that would like new
  firmware files installed for some GPUs.

  Other than that it's pretty scattered all over.

  I may have a follow up pull request as I know BenH has a bunch of AST
  rework and fixes and I'd like to get those in once they've been tested
  by AST, and I've got at least one pull request I'm just trying to get
  the author to fix up.

  Core:
   - drm_mm reworked
   - Connector list locking and iterators
   - Documentation updates
   - Format handling rework
   - MMU-less support for fbdev helpers
   - drm_crtc_from_index helper
   - Core CRC API
   - Remove drm_framebuffer_unregister_private
   - Debugfs cleanup
   - EDID/Infoframe fixes
   - Release callback
   - Tinydrm support (smaller drivers for simple hw)

  panel:
   - Add support for some new simple panels

  i915:
   - FBC by default for gen9+
   - Shared dpll cleanups and docs
   - GEN8 powerdomain cleanup
   - DMC support on GLK
   - DP MST audio support
   - HuC loading support
   - GVT init ordering fixes
   - GVT IOMMU workaround fix

  amdgpu/radeon:
   - Power/clockgating improvements
   - Preliminary SR-IOV support
   - TTM buffer priority and eviction fixes
   - SI DPM quirks removed due to firmware fixes
   - Powerplay improvements
   - VCE/UVD powergating fixes
   - Cleanup SI GFX code to match CI/VI
   - Support for > 2 displays on 3/5 crtc asics
   - SI headless fixes

  nouveau:
   - Rework securre boot code in prep for GP10x secure boot
   - Channel recovery improvements
   - Initial power budget code
   - MMU rework preperation

  vmwgfx:
   - Bunch of fixes and cleanups

  exynos:
   - Runtime PM support for MIC driver
   - Cleanups to use atomic helpers
   - UHD Support for TM2/TM2E boards
   - Trigger mode fix for Rinato board

  etnaviv:
   - Shader performance fix
   - Command stream validator fixes
   - Command buffer suballocator

  rockchip:
   - CDN DisplayPort support
   - IOMMU support for arm64 platform

  imx-drm:
   - Fix i.MX5 TV encoder probing
   - Remove lower fb size limits

  msm:
   - Support for HW cursor on MDP5 devices
   - DSI encoder cleanup
   - GPU DT bindings cleanup

  sti:
   - stih410 cleanups
   - Create fbdev at binding
   - HQVDP fixes
   - Remove stih416 chip functionality
   - DVI/HDMI mode selection fixes
   - FPS statistic reporting

  omapdrm:
   - IRQ code cleanup

  dwi-hdmi bridge:
   - Cleanups and fixes

  adv-bridge:
   - Updates for nexus

  sii8520 bridge:
   - Add interlace mode support
   - Rework HDMI and lots of fixes

  qxl:
   - probing/teardown cleanups

  ZTE drm:
   - HDMI audio via SPDIF interface
   - Video Layer overlay plane support
   - Add TV encoder output device

  atmel-hlcdc:
   - Rework fbdev creation logic

  tegra:
   - OF node fix

  fsl-dcu:
   - Minor fixes

  mali-dp:
   - Assorted fixes

  sunxi:
   - Minor fix"

[ This was the "fixed" pull, that still had build warnings due to people
  not even having build tested the result. I'm not a happy camper

  I've fixed the things I noticed up in this merge.      - Linus ]

* tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits)
  lib/Kconfig: make PRIME_NUMBERS not user selectable
  drm/tinydrm: helpers: Properly fix backlight dependency
  drm/tinydrm: mipi-dbi: Fix field width specifier warning
  drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized
  drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files
  drm/amd/powerplay: fix PSI feature on Polars12
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/tinydrm: Add support for Multi-Inno MI0283QT display
  dt-bindings: Add Multi-Inno MI0283QT binding
  dt-bindings: display/panel: Add common rotation property
  of: Add vendor prefix for Multi-Inno
  drm/tinydrm: Add MIPI DBI support
  drm/tinydrm: Add helper functions
  drm: Add DRM support for tiny LCD displays
  drm/amd/amdgpu: post card if there is real hw resetting performed
  drm/nouveau/tmr: provide backtrace when a timeout is hit
  drm/nouveau/pci/g92: Fix rearm
  drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios
  drm/nouveau/hwmon: expose power_max and power_crit
  ..

Linus doesn't like it user selectable, so kill it until
someone needs it for something else.
Signed-off-by: Dave Airlie <airlied@redhat.com>

BACKLIGHT_CLASS_DEVICE was selected in the last version of the
tinydrm patchset to fix the backlight dependency, but the
ifdef CONFIG_BACKLIGHT_CLASS_DEVICE was forgotten. Fix that.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This warning is seen on 64-bit builds in functions:
   'mipi_dbi_typec1_command':
   'mipi_dbi_typec3_command_read':
   'mipi_dbi_typec3_command':

>> drivers/gpu/drm/tinydrm/mipi-dbi.c:65:20: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'size_t {aka long unsigned int}' [-Wformat=]
      DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, len, data); \
                       ^
   include/drm/drmP.h:228:40: note: in definition of macro 'DRM_DEBUG_DRIVER'
     drm_printk(KERN_DEBUG, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
                                           ^~~
>> drivers/gpu/drm/tinydrm/mipi-dbi.c:671:2: note: in expansion of macro 'MIPI_DBI_DEBUG_COMMAND'
     MIPI_DBI_DEBUG_COMMAND(cmd, parameters, num);
     ^~~~~~~~~~~~~~~~~~~~~~

Fix by casting 'len' to int in the macro MIPI_DBI_DEBUG_COMMAND().
There is no chance of overflow.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Fix this warning:
drivers/gpu/drm/tinydrm/mipi-dbi.c: In function ‘mipi_dbi_debugfs_command_write’:
drivers/gpu/drm/tinydrm/mipi-dbi.c:905:8: warning: ‘cmd’ may be used uninitialized in this function [-Wmaybe-uninitialized]
  ret = mipi_dbi_command_buf(mipi, cmd, parameters, i);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

cmd can't be used uninitialized, but to satisfy the compiler,
initialize it to zero.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull usercopy test fix from Kees Cook:
 "Fix for non-MMU ARM testing, from Arnd Bergmann"

* tag 'usercopy-v4.11-rc1.fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usercopy: ARM NOMMU has no 64-bit get_user

Pull ARM SoC driver updates from Arnd Bergmann:
 "Driver updates for ARM SoCs.

  A handful of driver changes this time around. The larger changes are:

   - Reset drivers for hi3660 and zx2967

   - AHCI driver for Davinci, acked by Tejun and brought in here due to
     platform dependencies

   - Cleanups of atmel-ebi (External Bus Interface)

   - Tweaks for Rockchip GRF (General Register File) usage (kitchensink
     misc register range on the SoCs)

   - PM domains changes for support of two new ZTE SoCs (zx296718 and
     zx2967)"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits)
  soc: samsung: pmu: Add register defines for pad retention control
  reset: make zx2967 explicitly non-modular
  reset: core: fix reset_control_put
  soc: samsung: pm_domains: Read domain name from the new label property
  soc: samsung: pm_domains: Remove message about failed memory allocation
  soc: samsung: pm_domains: Remove unused name field
  soc: samsung: pm_domains: Use full names in subdomains registration log
  sata: ahci-da850: un-hardcode the MPY bits
  sata: ahci-da850: add a workaround for controller instability
  sata: ahci: export ahci_do_hardreset() locally
  sata: ahci-da850: implement a workaround for the softreset quirk
  sata: ahci-da850: add device tree match table
  sata: ahci-da850: get the sata clock using a connection id
  soc: samsung: pmu: Remove duplicated define for ARM_L2_OPTION register
  memory: atmel-ebi: Enable the SMC clock if specified
  soc: samsung: pmu: Remove unused and duplicated defines
  memory: atmel-ebi: Properly handle multiple reference to the same CS
  memory: atmel-ebi: Fix the test to enable generic SMC logic
  soc: samsung: pm_domains: Add new Exynos5433 compatible
  soc: samsung: pmu: Add dummy support for Exynos5433 SoC
  ...

Pull ARM 64-bit DT updates from Arnd Bergmann:
 "ARM64 DT updates are fairly small this time, only two new SoCs and a
  handful of new machines get added, all of them similar to other
  hardware we already support.

  New SoC:

   - HiSilicon Kirin960/Hi3660 and HiKey960 development board

   - NXP LS1012a with three reference boards:
        http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/qoriq-layerscape-arm-processors/qoriq-layerscape-1012a-low-power-communication-processor:LS1012A

  New development board:

   - Banana Pi M64, based on Allwinner A64:
        http://www.banana-pi.org/m64.html

   - SolidRun MACCHIATOBin based on Marvell Armada 8K:
        https://www.solid-run.com/marvell-armada-family/armada-8040-community-board/

   - Broadcom BCM958712DxXMC NorthStar2 reference board (another one)

  A lot of platforms improve support for existing machines by adding
  extra devices for which a binding and driver is availabe:

  Allwinner:
   - MMC, USB

  ARM Juno:
   - Coresight, STM

  Broadcom:
   - NS2 GICv2m irqchip and PCIe

  Marvell:
   - Armada 3700 SPI, I2C, ethernet switch

  Mediatek:
   - MT8173 thermal

  NXP i.MX:
   - LS1046A thermal

  Qualcomm:
   - coresight on MSM8916, HDMI, WCNSS, SCM

  Renesas:
   - r8a779[56] thermal, powerdomain, ethernet, sound, pwm, can, can fd

  Rockchip:
   - thermal, eDP, pinctrl enhancements

  Samsung:
   - TM2 touchkey, Exynos5433 HDMI and power management improvements

  UniPhier:
   - SD reset, eMMC controller

  ZTE:
   - oppv2 cpufreq"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (110 commits)
  arm64: dts: qcom: Add msm8916 CoreSight components
  arm64: dts: marvell: adjust name of sd-mmc-gop clock in syscon
  arm64: allwinner: add BananaPi-M64 support
  arm64: allwinner: a64: add UART1 pin nodes
  arm64: allwinner: pine64: add MMC support
  arm64: allwinner: a64: Increase the MMC max frequency
  arm64: allwinner: a64: Add MMC pinctrl nodes
  arm64: allwinner: a64: Add MMC nodes
  dt-bindings: clockgen: Add compatible string for LS1012A
  Documentation: DT: add LS1012A compatible for SCFG and DCFG
  Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
  arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
  arm64: tegra: Use symbolic reset identifiers
  arm64: dts: r8a7796: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: Mark EthernetAVB device node disabled
  arm64: dts: r8a7795: tidyup audma definition order
  arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
  arm64: dts: r8a7796: Add R-Car Gen3 thermal support
  arm64: dts: r8a7795: Add R-Car Gen3 thermal support
  ...

Pull ARM DT updates from Arnd Bergmann:
 "A total of 380 patches this time, mostly adding support for more
  hardware in the device tree descriptions. There is not much exciting
  here for 4.11, but I've tried my best to condense the information from
  the pull requests I got into a readable summary.

  Noteworthy changes to existing platforms include:

   - The GIC memory map was a bit wrong almost everywhere and now gets
     fixed up

   - The Allwinner platforms convert to the generic pinmux properties

   - The Marvell EBU platforms now use the new DSA binding

   - Samsung Exynos4212 was unused and gets removed

   - The Renesas power management got improved

  New production machines:

   - Lego Mindstorms EV3:
        https://www.lego.com/en-us/mindstorms/about-ev3

   - Beelink X2 Android media box:
        http://linux-sunxi.org/Beelink_X2

   - "Romulus" baseboard management controller for OpenPower

   - Axentia TSE-850 Data Radio Channel (DARC) encoder:
        http://www.axentia.se/db/equipment.html

   - Luxul XAP-1410 and XWR-1200 wireless access points:
        https://luxul.com/xap-1410

  New SoCs:

   - Allwinner H2+ and V3s, both minor variations of already supported
     chips:
        http://www.allwinnertech.com/index.php?c=product&a=index&id=38

   - Marvell Prestera DX packet processors based on Armada XP
     architecture:
        http://www.marvell.com/switching/prestera-dx/

   - Samsung Exynos4412 Prime gets added, a minor variation of
     Exynos4412

  New developer and reference boards:

   - Lichee Pi One, Lichee Pi Zero and Orange Pi Zero, all based on
     Allwinner SoCs:
        http://linux-sunxi.org/LicheePi_One
        http://www.orangepi.org/orangepizero/

   - SAMA5d36ek Reference platform:
        http://www.atmel.com/tools/sama5d36-ek.aspx

   - Beaglebone Green Wireless and Black Wireless:
        https://beagleboard.org/black-wireless
        https://beagleboard.org/green-wireless

   - phyCORE-AM335x System on Module:
        http://phytec.com/products/system-on-modules/phycore/am335x/

   - New revision of "vf610-zii" Zodiac Inflight Innovations board

   - Various i.MX System-on-Module: Is.IoT MX6UL, SavageBoard, Engicam
     i.Core:
        http://www.opossom.com/english/index.html
        http://www.savageboard.org/
        http://www.engicam.com/en/products/embedded/som/sodimm/is-iot-mx6ul
        http://www.engicam.com/en/products/embedded/som/sodimm/i-core-m6s-dl-d-q

   - Liebherr (LWN) monitor 6 based on i.MX6 Quad, no idea what this is

   - Cleanups and bugfixes on at91, bcm53xx, i.MX, mvebu, omap, oxnas,
     qcom, rockchip, sti, stm32 and tegra

  New device supports added to some boards and SoCs, briefly by platform:

   - Allwinner: SPDIF, A33 cpufreq, A33 Mali GPU

   - Aspeed: network, ipmi bt, gpio, pinmux

   - Broadcom: video encoder for raspberry pi, qspi, ethernet, sd/mmc

   - TI DaVinci: gpio, lcdc, usb, video-in, uart

   - TI Keystone 2: MSM RAM, power/reset, uart

   - Mediatek MT2701: clocks, iommu, spi, nand, adc, thermal

   - Marvell EBU: ethernet switch on Turris Omnia

   - NXP i.MX: otp ram, USB, wifi, bluetooth, spdif, spi, pmic, eeprom,
     mmc, nand

   - TI OMAP:

   - Qualcomm: coresight, gyro/accelerometer, hdmi

   - Renesas: pmic, soc-id

   - Rockchip: qos

   - Samsung: audio on Odroid-X

   - Socfpga: FPGA manager, i2c, led, can, watchdog, nand, power monitor

   - STi: video in/out

   - STM32: timer, pwm, i2c, rtc, add, i2s

   - NVIDIA Tegra: tpm

   - Uniphier: mmc/sd pinmux"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (380 commits)
  ARM: dts: armada-385-linksys: fix DSA compatible property
  ARM: dts: Fix typo in armada-xp-98dx4251
  ARM: DTS: Fix register map for virt-capable GIC
  dt-bindings: arm,gic: Fix binding example for a virt-capable GIC
  ARM: dts: sun8i: sinlinx: Enable audio nodes
  ARM: dts: sun8i: parrot: Enable audio nodes
  ARM: dts: sun8i: Add audio codec, dai and card for A33
  ARM: dts: Add EMAC AXI settings for Arria10
  ARM: dts: am335x-chiliboard: Support charger
  ARM: dts: am335x-chiliboard: Support power button
  ARM: sun8i: dt: Add mali node
  dt-bindings: gpu: Add Mali Utgard bindings
  ARM: dts: stm32: Add I2C1 support for STM32429 eval board
  ARM: dts: stm32: Add I2C1 support for STM32F429 SoC
  ARM: dts: stm32: Use clock DT binding definition on stm32f429 family
  dt-bindings: mfd: stm32f4: Add missing binding definition
  dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro
  ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco
  ARM: dts: stm32: add Timers driver for stm32f429 MCU
  ARM: dts: add the AB8500 sysclk to the device trees
  ...

Pull ARM SoC defconfig updates from Arnd Bergmann:
 "Defconfig additions, removals, etc. Almost all of them just turn on
  drivers that we want on some platform, usually after the driver has
  been merged into mainline.

  There is now a new defconfig file for tango4"

* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: multi_v7_defconfig: enable pstore configs
  ARM: multi_v7_defconfig: enable some newly added crypto modules
  ARM: davinci_all_defconfig: enable SATA modules
  arm64: defconfig: enable CONFIG_MTD_NAND and CONFIG_MTD_NAND_DENALI_DT
  arm64: defconfig: enable CONFIG_MTD_BLOCK
  ARM: Import tango4_defconfig
  ARM: omap2plus_defconfig: Enable support for RTC M41T80
  ARM: omap2plus_defconfig: Enable support for micrell phys
  ARM: vf610m4: defconfig: enable EXT4 filesystem
  ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
  arm64: defconfig: Enable NUMA and NUMA_BALANCING
  arm64: defconfig: enable SMMUv3 config
  ARM: davinci_all_defconfig: enable iio
  ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER
  ARM: configs: stm32: Add RTC support in STM32 defconfig
  ARM: defconfig: qcom: add APQ8060 DragonBoard devices
  ARM: qcom_defconfig: enable thermal sensors
  ARM: qcom_defconfig: add ahci configs
  ARM: qcom_defconfig: add pcie and atl1c ethernet configs
  ARM: qcom_defconfig: add usb related configs
  ...

Pull ARM SoC 64-bit updates from Arnd Bergmann:
 "Changes to platform code for 64-bit ARM platforms, only trivial stuff
  this time, a few defconfig changes to enable drivers, and a new entry
  for the Cavium ThunderX2 platform"

* tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  MAINTAINERS: Add Cavium ThunderX2 entry
  arm64: add ARCH_THUNDER2 to defconfig
  arm64: add THUNDER2 processor family
  MAINTAINERS: Extend ARM/Mediatek SoC support section
  arm64: defconfig: enable CONFIG_MMC_SDHCI_CADENCE
  arm64: defconfig: enable XORv2 for Marvell Armada 7K/8K

Pull ARM SoC platform updates from Arnd Bergmann:
 "In the SoC branch we normally collect classic arch/arm/mach-*
  contents, i.e. C code changes for SoC platforms. This release cycle
  the diffstat is quite nice, in that we're removing 3x the amount of
  code that's being added.

  The main reason for this is that there's a removal of camera drivers
  for Freescale i.MX chips (driver was removed so the device
  registration isn't needed any more). There's also removal of display
  initialization code for OMAP that is no longer needed.

  The rest are mostly minor tweaks and cleanups; constification on
  Samsung platforms, cleanup of ux500 platform data, purge of other
  unused platform data/device seutp on i.MX and other good stuff.

  New SoC support this cycle is for two Allwinner platforms, H2+ and
  V3s"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (55 commits)
  ARM: ux500: remove deleted file from Makefile
  ARM: ep93xx: Disable TS-72xx watchdog before uncompressing
  ARM: ux500: cut some platform data
  MAINTAINERS: Update for the current location of the bcm2835 tree.
  ARM: davinci: remove BUG_ON() from da850_register_sata()
  ARM: davinci: da850: model the SATA refclk
  ARM: davinci: da850: add con_id for the SATA clock
  ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for SATA
  arm: mvebu: support for SMP on 98DX3336 SoC
  dt-bindings: video: exynos7-decon: Remove obsolete samsung,power-domain property
  soc: dove: constify reset_control_ops structures
  ARM: mv78xx0: fix possible PCI buffer overflow
  MAINTAINERS: transfer maintainership for the EZX platform
  ARM: shmobile: rcar-gen2: Add more register documentation
  ARM: tegra: paz00: Fix __initdata placement
  ARM: OMAP: clock: Remove unused mpurate cmdline option
  ARM: davinci: add skeleton for pdata-quirks
  arm: sunxi: add support for V3s SoC
  ARM: OMAP2+: omap_hwmod: Add support for earlycon
  arm: hisi: drop extern hip01_cpu_die
  ...

Pull ARM SoC non-urgent fixes from Arnd Bergmann:
 "We sometimes collect non-critical fixes that come in during the later
  part of the merge window in a branch for the next release instead, and
  this is that contents for v4.11.

  Most of these are OMAP fixes, dealing with OMAP36/37 detection, quirks
  and setup. There's also some fixes for Davinci and a Kconfig fix for
  SCPI to only enable on ARM{,64}"

* tag 'armsoc-fixes-nc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  firmware: arm_scpi: Add hardware dependencies
  ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
  ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
  ARM: dts: Fix compatible for ti81xx uarts for 8250
  ARM: dts: Fix am335x and dm814x scm syscon to probe children
  ARM: OMAP2+: Fix init for multiple quirks for the same SoC
  ARM: dts: Fix omap3 off mode pull defines
  bus: da850-mstpri: fix my e-mail address
  ARM: davinci: da850: fix da850_set_pll0rate()
  ARM: davinci: da850: coding style fix

Some ttm/amd fixes.

* 'drm-next-4.11' of git://people.freedesktop.org/~agd5f/linux:
  drm/amd/powerplay: fix PSI feature on Polars12.
  drm/amdgpu: refuse to reserve io mem for split VRAM buffers
  drm/ttm: fix use-after-free races in vm fault handling
  drm/amd/amdgpu: post card if there is real hw resetting performed

drm/panel: Changes for v4.11-rc1

This set contains a couple of cleanups as well as support for a few more
simple panels.

* tag 'drm/panel/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Specify bus width and flags for EDT displays
  drm/panel: simple: Add Netron DY E231732
  of: Add vendor prefix for Netron DY
  drm/panel: simple: Add support for Tianma TM070JDHG30
  of: Add vendor prefix for Tianma Micro-electronics
  drm/panel: simple: Add support BOE NV101WXMN51
  dt-bindings: display: Add BOE NV101WXMN51 panel binding
  drm/panel: Constify device node argument to of_drm_find_panel()

drm/tegra: Changes for v4.11-rc1

Just a single change that hooks up the Tegra DRM parent device to the
correct device tree node.

* tag 'drm/tegra/for-4.11-rc1' of git://anongit.freedesktop.org/tegra/linux:
  gpu: host1x: Set OF node for new host1x devices

Pull PCI updates from Bjorn Helgaas:

 - add ASPM L1 substate support

 - enable PCIe Extended Tags when supported

 - configure PCIe MPS settings on iProc, Versatile, X-Gene, and Xilinx

 - increase VPD access timeout

 - add ACS quirks for Intel Union Point, Qualcomm QDF2400 and QDF2432

 - use new pci_irq_alloc_vectors() in more drivers

 - fix MSI affinity memory leak

 - remove unused MSI interfaces and update documentation

 - remove unused AER .link_reset() callback

 - avoid pci_lock / p->pi_lock deadlock seen with perf

 - serialize sysfs enable/disable num_vfs operations

 - move DesignWare IP from drivers/pci/host/ to drivers/pci/dwc/ and
   refactor so we can support both hosts and endpoints

 - add DT ECAM-like support for HiSilicon Hip06/Hip07 controllers

 - add Rockchip system power management support

 - add Thunder-X cn81xx and cn83xx support

 - add Exynos 5440 PCIe PHY support

* tag 'pci-v4.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (93 commits)
  PCI: dwc: Remove dependency of designware on CONFIG_PCI
  PCI: dwc: Add CONFIG_PCIE_DW_HOST to enable PCI dwc host
  PCI: dwc: Split pcie-designware.c into host and core files
  PCI: dwc: designware: Fix style errors in pcie-designware.c
  PCI: dwc: designware: Parse "num-lanes" property in dw_pcie_setup_rc()
  PCI: dwc: all: Split struct pcie_port into host-only and core structures
  PCI: dwc: designware: Get device pointer at the start of dw_pcie_host_init()
  PCI: dwc: all: Rename cfg_read/cfg_write to read/write
  PCI: dwc: all: Use platform_set_drvdata() to save private data
  PCI: dwc: designware: Move register defines to designware header file
  PCI: dwc: Use PTR_ERR_OR_ZERO to simplify code
  PCI: dra7xx: Group PHY API invocations
  PCI: dra7xx: Enable MSI and legacy interrupts simultaneously
  PCI: dra7xx: Add support to force RC to work in GEN1 mode
  PCI: dra7xx: Simplify probe code with devm_gpiod_get_optional()
  PCI: Move DesignWare IP support to new drivers/pci/dwc/ directory
  PCI: exynos: Support the PHY generic framework
  Documentation: binding: Modify the exynos5440 PCIe binding
  phy: phy-exynos-pcie: Add support for Exynos PCIe PHY
  Documentation: samsung-phy: Add exynos-pcie-phy binding
  ...

Pull networking fixes from David Miller:

 1) Some 'const'ing in qlogic networking drivers, from Bhumika Goyal.

 2) Fix scheduling while atomic in l2tp network namespace exit by
    deferring the work to the workqueue. From Ridge Kennedy.

 3) Fix use after free in dccp timewait handling, from Andrey Ryabinin.

 4) mlx5e CQE compression engine not initialized properly, from Tariq
    Toukan.

 5) Some UAPI header fixes from Dmitry V. Levin.

 6) Don't overwrite module parameter value in mlx4 driver, from Majd
    Dibbiny.

 7) Fix divide by zero in xt_hashlimit netfilter module, from Alban
    Browaeys.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits)
  bpf: Fix bpf_xdp_event_output
  net/mlx4_en: Use __skb_fill_page_desc()
  net/mlx4_core: Use cq quota in SRIOV when creating completion EQs
  net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
  net/mlx4: Spoofcheck and zero MAC can't coexist
  net/mlx4: Change ENOTSUPP to EOPNOTSUPP
  uapi: fix linux/rds.h userspace compilation errors
  uapi: fix linux/seg6.h and linux/seg6_iptunnel.h userspace compilation errors
  lib: Remove string from parman config selection
  forcedeth: Remove return from a void function
  bpf: fix spelling mistake: "proccessed" -> "processed"
  uapi: fix linux/llc.h userspace compilation error
  uapi: fix linux/ip6_tunnel.h userspace compilation errors
  net/mlx5e: Fix wrong CQE decompression
  net/mlx5e: Update MPWQE stride size when modifying CQE compress state
  net/mlx5e: Fix broken CQE compression initialization
  net/mlx5e: Do not reduce LRO WQE size when not using build_skb
  net/mlx5e: Register/unregister vport representors on interface attach/detach
  net/mlx5e: s390 system compilation fix
  tcp: account for ts offset only if tsecr not zero
  ...