1. 06 Mar, 2014 14 commits
    • Erik Hugne's avatar
      tipc: drop subscriber connection id invalidation · edcc0511
      Erik Hugne authored
      When a topology server subscriber is disconnected, the associated
      connection id is set to zero. A check vs zero is then done in the
      subscription timeout function to see if the subscriber have been
      shut down. This is unnecessary, because all subscription timers
      will be cancelled when a subscriber terminates. Setting the
      connection id to zero is actually harmful because id zero is the
      identity of the topology server listening socket, and can cause a
      race that leads to this socket being closed instead.
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Acked-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      edcc0511
    • Ying Xue's avatar
      tipc: avoid to unnecessary process switch under non-block mode · fe8e4649
      Ying Xue authored
      When messages are received via tipc socket under non-block mode,
      schedule_timeout() is called in tipc_wait_for_rcvmsg(), that is,
      the process of receiving messages will be scheduled once although
      timeout value passed to schedule_timeout() is 0. The same issue
      exists in accept()/wait_for_accept(). To avoid this unnecessary
      process switch, we only call schedule_timeout() if the timeout
      value is non-zero.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Reviewed-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fe8e4649
    • Ying Xue's avatar
      tipc: fix connection refcount leak · 4652edb7
      Ying Xue authored
      When tipc_conn_sendmsg() calls tipc_conn_lookup() to query a
      connection instance, its reference count value is increased if
      it's found. But subsequently if it's found that the connection is
      closed, the work of sending message is not queued into its server
      send workqueue, and the connection reference count is not decreased.
      This will cause a reference count leak. To reproduce this problem,
      an application would need to open and closes topology server
      connections with high intensity.
      
      We fix this by immediately decrementing the connection reference
      count if a send fails due to the connection being closed.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Acked-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4652edb7
    • Ying Xue's avatar
      tipc: allow connection shutdown callback to be invoked in advance · 6d4ebeb4
      Ying Xue authored
      Currently connection shutdown callback function is called when
      connection instance is released in tipc_conn_kref_release(), and
      receiving packets and sending packets are running in different
      threads. Even if connection is closed by the thread of receiving
      packets, its shutdown callback may not be called immediately as
      the connection reference count is non-zero at that moment. So,
      although the connection is shut down by the thread of receiving
      packets, the thread of sending packets doesn't know it. Before
      its shutdown callback is invoked to tell the sending thread its
      connection has been closed, the sending thread may deliver
      messages by tipc_conn_sendmsg(), this is why the following error
      information appears:
      
      "Sending subscription event failed, no memory"
      
      To eliminate it, allow connection shutdown callback function to
      be called before connection id is removed in tipc_close_conn(),
      which makes the sending thread know the truth in time that its
      socket is closed so that it doesn't send message to it. We also
      remove the "Sending XXX failed..." error reporting for topology
      and config services.
      Signed-off-by: default avatarYing Xue <ying.xue@windriver.com>
      Signed-off-by: default avatarErik Hugne <erik.hugne@ericsson.com>
      Reviewed-by: default avatarJon Maloy <jon.maloy@ericsson.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6d4ebeb4
    • Guillaume Nault's avatar
      l2tp: fix userspace reception on plain L2TP sockets · 9e9cb622
      Guillaume Nault authored
      As pppol2tp_recv() never queues up packets to plain L2TP sockets,
      pppol2tp_recvmsg() never returns data to userspace, thus making
      the recv*() system calls unusable.
      
      Instead of dropping packets when the L2TP socket isn't bound to a PPP
      channel, this patch adds them to its reception queue.
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e9cb622
    • Guillaume Nault's avatar
      l2tp: fix manual sequencing (de)activation in L2TPv2 · bb5016ea
      Guillaume Nault authored
      Commit e0d4435f "l2tp: Update PPP-over-L2TP driver to work over L2TPv3"
      broke the PPPOL2TP_SO_SENDSEQ setsockopt. The L2TP header length was
      previously computed by pppol2tp_l2t_header_len() before each call to
      l2tp_xmit_skb(). Now that header length is retrieved from the hdr_len
      session field, this field must be updated every time the L2TP header
      format is modified, or l2tp_xmit_skb() won't push the right amount of
      data for the L2TP header.
      
      This patch uses l2tp_session_set_header_len() to adjust hdr_len every
      time sequencing is (de)activated from userspace (either by the
      PPPOL2TP_SO_SENDSEQ setsockopt or the L2TP_ATTR_SEND_SEQ netlink
      attribute).
      Signed-off-by: default avatarGuillaume Nault <g.nault@alphalink.fr>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb5016ea
    • Haiyang Zhang's avatar
      hyperv: Move state setting for link query · 1b07da51
      Haiyang Zhang authored
      It moves the state setting for query into rndis_filter_receive_response().
      All callbacks including query-complete and status-callback are synchronized
      by channel->inbound_lock. This prevents pentential race between them.
      Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1b07da51
    • Soren Brinkmann's avatar
      net: macb: DMA-unmap full rx-buffer · 48330e08
      Soren Brinkmann authored
      When allocating RX buffers a fixed size is used, while freeing is based
      on actually received bytes, resulting in the following kernel warning
      when CONFIG_DMA_API_DEBUG is enabled:
       WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894()
       macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes]
       Modules linked in:
       CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65
       [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
       [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8)
       [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
       [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
       [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894)
       [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
       [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170)
       [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94)
       [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188)
       [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280)
       [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8)
       [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c)
       [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
       [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
       Exception stack(0xc056df20 to 0xc056df68)
       df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000
       df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658
       df60: 20000013 ffffffff
       [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8)
       [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138)
       [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c)
       [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124)
       [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0)
       ---[ end trace d5fdc38641bd3a11 ]---
       Mapped at:
        [<c0227184>] debug_dma_map_page+0x48/0x11c
        [<c02ab32c>] gem_rx_refill+0x154/0x1f8
        [<c02ac7b4>] macb_open+0x270/0x3e0
        [<c03152e0>] __dev_open+0x7c/0xfc
        [<c031554c>] __dev_change_flags+0x8c/0x140
      
      Fixing this by passing the same size which is passed during mapping the
      memory to the unmap function as well.
      Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
      Reviewed-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48330e08
    • Soren Brinkmann's avatar
      net: macb: Check DMA mappings for error · 92030908
      Soren Brinkmann authored
      With CONFIG_DMA_API_DEBUG enabled the following warning is printed:
       WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894()
       macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single]
       Modules linked in:
       CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f #63
       [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14)
       [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8)
       [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84)
       [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c)
       [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894)
       [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70)
       [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc)
       [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178)
       [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c)
       [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100)
       [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30)
       [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c)
       [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60)
       [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78)
       Exception stack(0xed197f60 to 0xed197fa8)
       7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122
       7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20
       7fa0: 60000013 ffffffff
       [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48)
       ---[ end trace 478f921d0d542d1e ]---
       Mapped at:
        [<c0227184>] debug_dma_map_page+0x48/0x11c
        [<c02aaca0>] macb_start_xmit+0x184/0x2a8
        [<c03143c0>] dev_hard_start_xmit+0x334/0x470
        [<c032c09c>] sch_direct_xmit+0x78/0x2f8
        [<c0314814>] __dev_queue_xmit+0x318/0x708
      
      due to missing checks of the dma mapping. Add the appropriate checks to fix
      this.
      Signed-off-by: default avatarSoren Brinkmann <soren.brinkmann@xilinx.com>
      Reviewed-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      92030908
    • Daniel Borkmann's avatar
      net: sctp: fix skb leakage in COOKIE ECHO path of chunk->auth_chunk · c485658b
      Daniel Borkmann authored
      While working on ec0223ec ("net: sctp: fix sctp_sf_do_5_1D_ce to
      verify if we/peer is AUTH capable"), we noticed that there's a skb
      memory leakage in the error path.
      
      Running the same reproducer as in ec0223ec and by unconditionally
      jumping to the error label (to simulate an error condition) in
      sctp_sf_do_5_1D_ce() receive path lets kmemleak detector bark about
      the unfreed chunk->auth_chunk skb clone:
      
      Unreferenced object 0xffff8800b8f3a000 (size 256):
        comm "softirq", pid 0, jiffies 4294769856 (age 110.757s)
        hex dump (first 32 bytes):
          00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
          89 ab 75 5e d4 01 58 13 00 00 00 00 00 00 00 00  ..u^..X.........
        backtrace:
          [<ffffffff816660be>] kmemleak_alloc+0x4e/0xb0
          [<ffffffff8119f328>] kmem_cache_alloc+0xc8/0x210
          [<ffffffff81566929>] skb_clone+0x49/0xb0
          [<ffffffffa0467459>] sctp_endpoint_bh_rcv+0x1d9/0x230 [sctp]
          [<ffffffffa046fdbc>] sctp_inq_push+0x4c/0x70 [sctp]
          [<ffffffffa047e8de>] sctp_rcv+0x82e/0x9a0 [sctp]
          [<ffffffff815abd38>] ip_local_deliver_finish+0xa8/0x210
          [<ffffffff815a64af>] nf_reinject+0xbf/0x180
          [<ffffffffa04b4762>] nfqnl_recv_verdict+0x1d2/0x2b0 [nfnetlink_queue]
          [<ffffffffa04aa40b>] nfnetlink_rcv_msg+0x14b/0x250 [nfnetlink]
          [<ffffffff815a3269>] netlink_rcv_skb+0xa9/0xc0
          [<ffffffffa04aa7cf>] nfnetlink_rcv+0x23f/0x408 [nfnetlink]
          [<ffffffff815a2bd8>] netlink_unicast+0x168/0x250
          [<ffffffff815a2fa1>] netlink_sendmsg+0x2e1/0x3f0
          [<ffffffff8155cc6b>] sock_sendmsg+0x8b/0xc0
          [<ffffffff8155d449>] ___sys_sendmsg+0x369/0x380
      
      What happens is that commit bbd0d598 clones the skb containing
      the AUTH chunk in sctp_endpoint_bh_rcv() when having the edge case
      that an endpoint requires COOKIE-ECHO chunks to be authenticated:
      
        ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
        <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
        ------------------ AUTH; COOKIE-ECHO ---------------->
        <-------------------- COOKIE-ACK ---------------------
      
      When we enter sctp_sf_do_5_1D_ce() and before we actually get to
      the point where we process (and subsequently free) a non-NULL
      chunk->auth_chunk, we could hit the "goto nomem_init" path from
      an error condition and thus leave the cloned skb around w/o
      freeing it.
      
      The fix is to centrally free such clones in sctp_chunk_destroy()
      handler that is invoked from sctp_chunk_free() after all refs have
      dropped; and also move both kfree_skb(chunk->auth_chunk) there,
      so that chunk->auth_chunk is either NULL (since sctp_chunkify()
      allocs new chunks through kmem_cache_zalloc()) or non-NULL with
      a valid skb pointer. chunk->skb and chunk->auth_chunk are the
      only skbs in the sctp_chunk structure that need to be handeled.
      
      While at it, we should use consume_skb() for both. It is the same
      as dev_kfree_skb() but more appropriately named as we are not
      a device but a protocol. Also, this effectively replaces the
      kfree_skb() from both invocations into consume_skb(). Functions
      are the same only that kfree_skb() assumes that the frame was
      being dropped after a failure (e.g. for tools like drop monitor),
      usage of consume_skb() seems more appropriate in function
      sctp_chunk_destroy() though.
      
      Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk")
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Cc: Vlad Yasevich <yasevich@gmail.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Acked-by: default avatarNeil Horman <nhorman@tuxdriver.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c485658b
    • hayeswang's avatar
      r8152: disable the ECM mode · 10c32717
      hayeswang authored
      There are known issues for switching the drivers between ECM mode and
      vendor mode. The interrup transfer may become abnormal. The hardware
      may have the opportunity to die if you change the configuration without
      unloading the current driver first, because all the control transfers
      of the current driver would fail after the command of switching the
      configuration.
      
      Although to use the ecm driver and vendor driver independently is fine,
      it may have problems to change the driver from one to the other by
      switching the configuration. Additionally, now the vendor mode driver
      is more powerful than the ECM driver. Thus, disable the ECM mode driver,
      and let r8152 to set the configuration to vendor mode and reset the
      device automatically.
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      10c32717
    • Gavin Shan's avatar
      net/mlx4: Support shutdown() interface · 367d56f7
      Gavin Shan authored
      In kexec scenario, we failed to load the mlx4 driver in the
      second kernel because the ownership bit was hold by the first
      kernel without release correctly.
      
      The patch adds shutdown() interface so that the ownership can
      be released correctly in the first kernel. It also helps avoiding
      EEH error happened during boot stage of the second kernel because
      of undesired traffic, which can't be handled by hardware during
      that stage on Power platform.
      Signed-off-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
      Tested-by: default avatarWei Yang <weiyang@linux.vnet.ibm.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      367d56f7
    • Linus Lüssing's avatar
      bridge: multicast: add sanity check for query source addresses · 6565b9ee
      Linus Lüssing authored
      MLD queries are supposed to have an IPv6 link-local source address
      according to RFC2710, section 4 and RFC3810, section 5.1.14. This patch
      adds a sanity check to ignore such broken MLD queries.
      
      Without this check, such malformed MLD queries can result in a
      denial of service: The queries are ignored by any MLD listener
      therefore they will not respond with an MLD report. However,
      without this patch these malformed MLD queries would enable the
      snooping part in the bridge code, potentially shutting down the
      according ports towards these hosts for multicast traffic as the
      bridge did not learn about these listeners.
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Signed-off-by: default avatarLinus Lüssing <linus.luessing@web.de>
      Reviewed-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6565b9ee
    • Nikolay Aleksandrov's avatar
      net: fix for a race condition in the inet frag code · 24b9bf43
      Nikolay Aleksandrov authored
      I stumbled upon this very serious bug while hunting for another one,
      it's a very subtle race condition between inet_frag_evictor,
      inet_frag_intern and the IPv4/6 frag_queue and expire functions
      (basically the users of inet_frag_kill/inet_frag_put).
      
      What happens is that after a fragment has been added to the hash chain
      but before it's been added to the lru_list (inet_frag_lru_add) in
      inet_frag_intern, it may get deleted (either by an expired timer if
      the system load is high or the timer sufficiently low, or by the
      fraq_queue function for different reasons) before it's added to the
      lru_list, then after it gets added it's a matter of time for the
      evictor to get to a piece of memory which has been freed leading to a
      number of different bugs depending on what's left there.
      
      I've been able to trigger this on both IPv4 and IPv6 (which is normal
      as the frag code is the same), but it's been much more difficult to
      trigger on IPv4 due to the protocol differences about how fragments
      are treated.
      
      The setup I used to reproduce this is: 2 machines with 4 x 10G bonded
      in a RR bond, so the same flow can be seen on multiple cards at the
      same time. Then I used multiple instances of ping/ping6 to generate
      fragmented packets and flood the machines with them while running
      other processes to load the attacked machine.
      
      *It is very important to have the _same flow_ coming in on multiple CPUs
      concurrently. Usually the attacked machine would die in less than 30
      minutes, if configured properly to have many evictor calls and timeouts
      it could happen in 10 minutes or so.
      
      An important point to make is that any caller (frag_queue or timer) of
      inet_frag_kill will remove both the timer refcount and the
      original/guarding refcount thus removing everything that's keeping the
      frag from being freed at the next inet_frag_put.  All of this could
      happen before the frag was ever added to the LRU list, then it gets
      added and the evictor uses a freed fragment.
      
      An example for IPv6 would be if a fragment is being added and is at
      the stage of being inserted in the hash after the hash lock is
      released, but before inet_frag_lru_add executes (or is able to obtain
      the lru lock) another overlapping fragment for the same flow arrives
      at a different CPU which finds it in the hash, but since it's
      overlapping it drops it invoking inet_frag_kill and thus removing all
      guarding refcounts, and afterwards freeing it by invoking
      inet_frag_put which removes the last refcount added previously by
      inet_frag_find, then inet_frag_lru_add gets executed by
      inet_frag_intern and we have a freed fragment in the lru_list.
      
      The fix is simple, just move the lru_add under the hash chain locked
      region so when a removing function is called it'll have to wait for
      the fragment to be added to the lru_list, and then it'll remove it (it
      works because the hash chain removal is done before the lru_list one
      and there's no window between the two list adds when the frag can get
      dropped). With this fix applied I couldn't kill the same machine in 24
      hours with the same setup.
      
      Fixes: 3ef0eb0d ("net: frag, move LRU list maintenance outside of
      rwlock")
      
      CC: Florian Westphal <fw@strlen.de>
      CC: Jesper Dangaard Brouer <brouer@redhat.com>
      CC: David S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarNikolay Aleksandrov <nikolay@redhat.com>
      Acked-by: default avatarJesper Dangaard Brouer <brouer@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      24b9bf43
  2. 04 Mar, 2014 22 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c3bebc71
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix memory leak in ieee80211_prep_connection(), sta_info leaked on
          error.  From Eytan Lifshitz.
      
       2) Unintentional switch case fallthrough in nft_reject_inet_eval(),
          from Patrick McHardy.
      
       3) Must check if payload lenth is a power of 2 in
          nft_payload_select_ops(), from Nikolay Aleksandrov.
      
       4) Fix mis-checksumming in xen-netfront driver, ip_hdr() is not in the
          correct place when we invoke skb_checksum_setup().  From Wei Liu.
      
       5) TUN driver should not advertise HW vlan offload features in
          vlan_features.  Fix from Fernando Luis Vazquez Cao.
      
       6) IPV6_VTI needs to select NET_IPV_TUNNEL to avoid build errors, fix
          from Steffen Klassert.
      
       7) Add missing locking in xfrm_migrade_state_find(), we must hold the
          per-namespace xfrm_state_lock while traversing the lists.  Fix from
          Steffen Klassert.
      
       8) Missing locking in ath9k driver, access to tid->sched must be done
          under ath_txq_lock().  Fix from Stanislaw Gruszka.
      
       9) Fix two bugs in TCP fastopen.  First respect the size argument given
          to tcp_sendmsg() in the fastopen path, and secondly prevent
          tcp_send_syn_data() from potentially using order-5 allocations.
          From Eric Dumazet.
      
      10) Fix handling of default neigh garbage collection params, from Jiri
          Pirko.
      
      11) Fix cwnd bloat and over-inflation of RTT when transmit segmentation
          is in use.  From Eric Dumazet.
      
      12) Missing initialization of Realtek r8169 driver's statistics
          seqlocks.  Fix from Kyle McMartin.
      
      13) Fix RTNL assertion failures in 802.3ad and AB ARP monitor of bonding
          driver, from Ding Tianhong.
      
      14) Bonding slave release race can cause divide by zero, fix from
          Nikolay Aleksandrov.
      
      15) Overzealous return from neigh_periodic_work() causes reachability
          time to not be computed.  Fix from Duain Jiong.
      
      16) Fix regression in ipv6_find_hdr(), it should not return -ENOENT when
          a specific target is specified and found.  From Hans Schillstrom.
      
      17) Fix VLAN tag stripping regression in BNA driver, from Ivan Vecera.
      
      18) Tail loss probe can calculate bogus RTTs due to missing packet
          marking on retransmit.  Fix from Yuchung Cheng.
      
      19) We cannot do skb_dst_drop() in iptunnel_pull_header() because
          multicast loopback detection in later code paths need access to
          skb_rtable().  Fix from Xin Long.
      
      20) The macvlan driver regresses in that it propagates lower device
          offload support disables into itself, causing severe slowdowns when
          running over a bridge.  Provide the software offloads always on
          macvlan devices to deal with this and the regression is gone.  From
          Vlad Yasevich.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
        macvlan: Add support for 'always_on' offload features
        net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable
        ip_tunnel:multicast process cause panic due to skb->_skb_refdst NULL pointer
        net: cpsw: fix cpdma rx descriptor leak on down interface
        be2net: isolate TX workarounds not applicable to Skyhawk-R
        be2net: Fix skb double free in be_xmit_wrokarounds() failure path
        be2net: clear promiscuous bits in adapter->flags while disabling promiscuous mode
        be2net: Fix to reset transparent vlan tagging
        qlcnic: dcb: a couple off by one bugs
        tcp: fix bogus RTT on special retransmission
        hsr: off by one sanity check in hsr_register_frame_in()
        can: remove CAN FD compatibility for CAN 2.0 sockets
        can: flexcan: factor out soft reset into seperate funtion
        can: flexcan: flexcan_remove(): add missing netif_napi_del()
        can: flexcan: fix transition from and to freeze mode in chip_{,un}freeze
        can: flexcan: factor out transceiver {en,dis}able into seperate functions
        can: flexcan: fix transition from and to low power mode in chip_{en,dis}able
        can: flexcan: flexcan_open(): fix error path if flexcan_chip_start() fails
        can: flexcan: fix shutdown: first disable chip, then all interrupts
        USB AX88179/178A: Support D-Link DUB-1312
        ...
      c3bebc71
    • Linus Torvalds's avatar
      Merge tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · 16e3f539
      Linus Torvalds authored
      Pull regulator fixes from Mark Brown:
       "A couple of fixes here which ensure that regulators using the core
        support for GPIO enables work in all cases by ensuring that helpers
        are used consistently rather than open coding in places and hence not
        having GPIO support in some of them"
      
      * tag 'regulator-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: core: Replace direct ops->disable usage
        regulator: core: Replace direct ops->enable usage
      16e3f539
    • Linus Torvalds's avatar
      Merge branch 'akpm' (patches from Andrew Morton) · 3f803abf
      Linus Torvalds authored
      Merge misc fixes from Andrew Morton.
      
      * emailed patches from Andrew Morton akpm@linux-foundation.org>:
        mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness
        mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS
        MAINTAINERS: add and correct types of some "T:" entries
        MAINTAINERS: use tab for separator
        rapidio/tsi721: fix tasklet termination in dma channel release
        hfsplus: fix remount issue
        zram: avoid null access when fail to alloc meta
        sh: prefix sh-specific "CCR" and "CCR2" by "SH_"
        ocfs2: fix quota file corruption
        drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX
        kallsyms: fix absolute addresses for kASLR
        scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression
        mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking
        memcg: reparent charges of children before processing parent
        memcg: fix endless loop in __mem_cgroup_iter_next()
        lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock
        dma debug: account for cachelines and read-only mappings in overlap tracking
        mm: close PageTail race
        MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors
      3f803abf
    • Johannes Weiner's avatar
      mm: page_alloc: exempt GFP_THISNODE allocations from zone fairness · 27329369
      Johannes Weiner authored
      Jan Stancek reports manual page migration encountering allocation
      failures after some pages when there is still plenty of memory free, and
      bisected the problem down to commit 81c0a2bb ("mm: page_alloc: fair
      zone allocator policy").
      
      The problem is that GFP_THISNODE obeys the zone fairness allocation
      batches on one hand, but doesn't reset them and wake kswapd on the other
      hand.  After a few of those allocations, the batches are exhausted and
      the allocations fail.
      
      Fixing this means either having GFP_THISNODE wake up kswapd, or
      GFP_THISNODE not participating in zone fairness at all.  The latter
      seems safer as an acute bugfix, we can clean up later.
      Reported-by: default avatarJan Stancek <jstancek@redhat.com>
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Acked-by: default avatarMel Gorman <mgorman@suse.de>
      Cc: <stable@kernel.org>		[3.12+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      27329369
    • Liu Ping Fan's avatar
      mm: numa: bugfix for LAST_CPUPID_NOT_IN_PAGE_FLAGS · 1ae71d03
      Liu Ping Fan authored
      When doing some numa tests on powerpc, I triggered an oops bug.  I find
      it is caused by using page->_last_cpupid.  It should be initialized as
      "-1 & LAST_CPUPID_MASK", but not "-1".  Otherwise, in task_numa_fault(),
      we will miss the checking (last_cpupid == (-1 & LAST_CPUPID_MASK)).  And
      finally cause an oops bug in task_numa_group(), since the online cpu is
      less than possible cpu.  This happen with CONFIG_SPARSE_VMEMMAP disabled
      
      Call trace:
      
        SMP NR_CPUS=64 NUMA PowerNV
        Modules linked in:
        CPU: 24 PID: 804 Comm: systemd-udevd Not tainted3.13.0-rc1+ #32
        task: c000001e2746aa80 ti: c000001e32c50000 task.ti:c000001e32c50000
        REGS: c000001e32c53510 TRAP: 0300   Not tainted(3.13.0-rc1+)
        MSR: 9000000000009032 <SF,HV,EE,ME,IR,DR,RI>  CR:28024424  XER: 20000000
        CFAR: c000000000009324 DAR: 7265717569726857 DSISR:40000000 SOFTE: 1
        NIP  .task_numa_fault+0x1470/0x2370
        LR  .task_numa_fault+0x1468/0x2370
        Call Trace:
         .task_numa_fault+0x1468/0x2370 (unreliable)
         .do_numa_page+0x480/0x4a0
         .handle_mm_fault+0x4ec/0xc90
         .do_page_fault+0x3a8/0x890
         handle_page_fault+0x10/0x30
        Instruction dump:
        3c82fefb 3884b138 48d9cff1 60000000 48000574 3c62fefb3863af78 3c82fefb
        3884b138 48d9cfd5 60000000 e93f0100 <812902e4> 7d2907b45529063e 7d2a07b4
        ---[ end trace 15f2510da5ae07cf ]---
      Signed-off-by: default avatarLiu Ping Fan <pingfank@linux.vnet.ibm.com>
      Signed-off-by: default avatarAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
      Acked-by: default avatarPeter Zijlstra <peterz@infradead.org>
      Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Mel Gorman <mel@csn.ul.ie>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1ae71d03
    • Joe Perches's avatar
      MAINTAINERS: add and correct types of some "T:" entries · cea8321c
      Joe Perches authored
      Tree location entries should start with the appropriate type.
      
      Add git to some, hg to another.
      
      Neaten tree type description.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      cea8321c
    • Joe Perches's avatar
      MAINTAINERS: use tab for separator · b75f0050
      Joe Perches authored
      Convert whitespace to single tab for separators.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b75f0050
    • Alexandre Bounine's avatar
      rapidio/tsi721: fix tasklet termination in dma channel release · 04379dff
      Alexandre Bounine authored
      This patch is a modification of the patch originally proposed by
      Xiaotian Feng <xtfeng@gmail.com>: https://lkml.org/lkml/2012/11/5/413
      This new version disables DMA channel interrupts and ensures that the
      tasklet wil not be scheduled again before calling tasklet_kill().
      
      Unfortunately the updated patch was not released at that time due to
      planned rework of Tsi721 mport driver to use threaded interrupts (which
      has yet to happen).  Recently the issue was reported again:
      https://lkml.org/lkml/2014/2/19/762.
      
      Description from the original Xiaotian's patch:
      
       "Some drivers use tasklet_disable in device remove/release process,
        tasklet_disable will inc tasklet->count and return.  If the tasklet is
        not handled yet under some softirq pressure, the tasklet will be
        placed on the tasklet_vec, never have a chance to be excuted.  This
        might lead to a heavy loaded ksoftirqd, wakeup with pending_softirq,
        but tasklet is disabled.  tasklet_kill should be used in this case."
      
      This patch is applicable to kernel versions starting from v3.5.
      Signed-off-by: default avatarAlexandre Bounine <alexandre.bounine@idt.com>
      Cc: Matt Porter <mporter@kernel.crashing.org>
      Cc: Xiaotian Feng <xtfeng@gmail.com>
      Reviewed-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Cc: Mike Galbraith <bitbucket@online.de>
      Cc: <stable@vger.kernel.org>	[3.5+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      04379dff
    • Vyacheslav Dubeyko's avatar
      hfsplus: fix remount issue · bd2c0035
      Vyacheslav Dubeyko authored
      Current implementation of HFS+ driver has small issue with remount
      option.  Namely, for example, you are unable to remount from RO mode
      into RW mode by means of command "mount -o remount,rw /dev/loop0
      /mnt/hfsplus".  Trying to execute sequence of commands results in an
      error message:
      
        mount /dev/loop0 /mnt/hfsplus
        mount -o remount,ro /dev/loop0 /mnt/hfsplus
        mount -o remount,rw /dev/loop0 /mnt/hfsplus
      
        mount: you must specify the filesystem type
      
        mount -t hfsplus -o remount,rw /dev/loop0 /mnt/hfsplus
      
        mount: /mnt/hfsplus not mounted or bad option
      
      The reason of such issue is failure of mount syscall:
      
        mount("/dev/loop0", "/mnt/hfsplus", 0x2282a60, MS_MGC_VAL|MS_REMOUNT, NULL) = -1 EINVAL (Invalid argument)
      
      Namely, hfsplus_parse_options_remount() method receives empty "input"
      argument and return false in such case.  As a result, hfsplus_remount()
      returns -EINVAL error code.
      
      This patch fixes the issue by means of return true for the case of empty
      "input" argument in hfsplus_parse_options_remount() method.
      Signed-off-by: default avatarVyacheslav Dubeyko <slava@dubeyko.com>
      Cc: Al Viro <viro@zeniv.linux.org.uk>
      Cc: Christoph Hellwig <hch@infradead.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      bd2c0035
    • Minchan Kim's avatar
      zram: avoid null access when fail to alloc meta · db5d711e
      Minchan Kim authored
      zram_meta_alloc could fail so caller should check it.  Otherwise, your
      system will hang.
      Signed-off-by: default avatarMinchan Kim <minchan@kernel.org>
      Acked-by: default avatarJerome Marchand <jmarchan@redhat.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      db5d711e
    • Geert Uytterhoeven's avatar
      sh: prefix sh-specific "CCR" and "CCR2" by "SH_" · a5f6ea29
      Geert Uytterhoeven authored
      Commit bcf24e1d ("mmc: omap_hsmmc: use the generic config for
      omap2plus devices"), enabled the build for other platforms for compile
      testing.
      
      sh-allmodconfig now fails with:
      
          include/linux/omap-dma.h:171:8: error: expected identifier before numeric constant
          make[4]: *** [drivers/mmc/host/omap_hsmmc.o] Error 1
      
      This happens because SuperH #defines "CCR", which is one of the enum
      values in include/linux/omap-dma.h.  There's a similar issue with "CCR2"
      on sh2a.
      
      As "CCR" and "CCR2" are too generic names for global #defines, prefix
      them with "SH_" to fix this.
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a5f6ea29
    • Jan Kara's avatar
      ocfs2: fix quota file corruption · 15c34a76
      Jan Kara authored
      Global quota files are accessed from different nodes.  Thus we cannot
      cache offset of quota structure in the quota file after we drop our node
      reference count to it because after that moment quota structure may be
      freed and reallocated elsewhere by a different node resulting in
      corruption of quota file.
      
      Fix the problem by clearing dq_off when we are releasing dquot structure.
      We also remove the DB_READ_B handling because it is useless -
      DQ_ACTIVE_B is set iff DQ_READ_B is set.
      Signed-off-by: default avatarJan Kara <jack@suse.cz>
      Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
      Cc: Joel Becker <jlbec@evilplan.org>
      Reviewed-by: default avatarMark Fasheh <mfasheh@suse.de>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      15c34a76
    • Vikas Sajjan's avatar
      drivers/rtc/rtc-s3c.c: fix incorrect way of save/restore of S3C2410_TICNT for TYPE_S3C64XX · 40d2d968
      Vikas Sajjan authored
      On exynos5250, exynos5420 and exynos5260 it was observed that, after 1
      cycle of S2R, the rtc-tick occurs at a very fast rate as compared to the
      rtc-tick occuring before S2R.
      
      This patch fixes the above issue by correcting the wrong way of
      save/restore of S3C2410_TICNT for TYPE_S3C64XX.
      Signed-off-by: default avatarVikas Sajjan <vikas.sajjan@samsung.com>
      Cc: Grant Likely <grant.likely@linaro.org>
      Cc: Rob Herring <robh+dt@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      40d2d968
    • Andy Honig's avatar
      kallsyms: fix absolute addresses for kASLR · 0f55159d
      Andy Honig authored
      Currently symbols that are absolute addresses are incorrectly displayed
      in /proc/kallsyms if the kernel is loaded with kASLR.
      
      The problem was that the scripts/kallsyms.c file which generates the
      array of symbol names and addresses uses an relocatable value for all
      symbols, even absolute symbols.  This patch fixes that.
      
      Several kallsyms output in different boot states for comparison:
      
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.nokaslr
        0000000000000000 D __per_cpu_start
        0000000000014280 D __per_cpu_end
        ffffffff810001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr1
        000000001f200000 D __per_cpu_start
        000000001f214280 D __per_cpu_end
        ffffffffa02001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr2
        000000000d400000 D __per_cpu_start
        000000000d414280 D __per_cpu_end
        ffffffff8e4001c8 T _stext
        $ egrep '_(stext|_per_cpu_(start|end))' /root/kallsyms.kaslr-fixed
        0000000000000000 D __per_cpu_start
        0000000000014280 D __per_cpu_end
        ffffffffadc001c8 T _stext
      Signed-off-by: default avatarAndy Honig <ahonig@google.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Michal Marek <mmarek@suse.cz>
      Cc: Rusty Russell <rusty@rustcorp.com.au>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0f55159d
    • Daniel M. Weeks's avatar
      scripts/gen_initramfs_list.sh: fix flags for initramfs LZ4 compression · 5ec384d4
      Daniel M. Weeks authored
      LZ4 as implemented in the kernel differs from the default method now
      used by the reference implementation of LZ4.  Until the in-kernel method
      is updated to support the new default, passing the legacy flag (-l) to
      the compressor is necessary.  Without this flag the kernel-generated,
      LZ4-compressed initramfs is junk.
      
      Kyungsik said:
      
      : It seems that lz4 supports legacy format with the same option as lz4c
      : does.  Just looking at the first few bytes of lz4 compressed image, we can
      : see whether it is new format or not.
      :
      : It shows new format magic number without this patch.  New format magic
      : number is 0x184d2204.
      :
      : $ hexdump -C ./initramfs_data.cpio.lz4 |more
      : 00000000  04 22 4d 18 64 70 b9 69 (Little Endian)
      : ...
      :
      : Currently kernel supports legacy format only.
      Signed-off-by: default avatarDaniel M. Weeks <dan@danweeks.net>
      Cc: Michal Marek <mmarek@suse.cz>
      Acked-by: default avatarKyungsik Lee <kyungsik.lee@lge.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5ec384d4
    • Vlastimil Babka's avatar
      mm: include VM_MIXEDMAP flag in the VM_SPECIAL list to avoid m(un)locking · 9050d7eb
      Vlastimil Babka authored
      Daniel Borkmann reported a VM_BUG_ON assertion failing:
      
        ------------[ cut here ]------------
        kernel BUG at mm/mlock.c:528!
        invalid opcode: 0000 [#1] SMP
        Modules linked in: ccm arc4 iwldvm [...]
         video
        CPU: 3 PID: 2266 Comm: netsniff-ng Not tainted 3.14.0-rc2+ #8
        Hardware name: LENOVO 2429BP3/2429BP3, BIOS G4ET37WW (1.12 ) 05/29/2012
        task: ffff8801f87f9820 ti: ffff88002cb44000 task.ti: ffff88002cb44000
        RIP: 0010:[<ffffffff81171ad0>]  [<ffffffff81171ad0>] munlock_vma_pages_range+0x2e0/0x2f0
        Call Trace:
          do_munmap+0x18f/0x3b0
          vm_munmap+0x41/0x60
          SyS_munmap+0x22/0x30
          system_call_fastpath+0x1a/0x1f
        RIP   munlock_vma_pages_range+0x2e0/0x2f0
        ---[ end trace a0088dcf07ae10f2 ]---
      
      because munlock_vma_pages_range() thinks it's unexpectedly in the middle
      of a THP page.  This can be reproduced with default config since 3.11
      kernels.  A reproducer can be found in the kernel's selftest directory
      for networking by running ./psock_tpacket.
      
      The problem is that an order=2 compound page (allocated by
      alloc_one_pg_vec_page() is part of the munlocked VM_MIXEDMAP vma (mapped
      by packet_mmap()) and mistaken for a THP page and assumed to be order=9.
      
      The checks for THP in munlock came with commit ff6a6da6 ("mm:
      accelerate munlock() treatment of THP pages"), i.e.  since 3.9, but did
      not trigger a bug.  It just makes munlock_vma_pages_range() skip such
      compound pages until the next 512-pages-aligned page, when it encounters
      a head page.  This is however not a problem for vma's where mlocking has
      no effect anyway, but it can distort the accounting.
      
      Since commit 7225522b ("mm: munlock: batch non-THP page isolation
      and munlock+putback using pagevec") this can trigger a VM_BUG_ON in
      PageTransHuge() check.
      
      This patch fixes the issue by adding VM_MIXEDMAP flag to VM_SPECIAL, a
      list of flags that make vma's non-mlockable and non-mergeable.  The
      reasoning is that VM_MIXEDMAP vma's are similar to VM_PFNMAP, which is
      already on the VM_SPECIAL list, and both are intended for non-LRU pages
      where mlocking makes no sense anyway.  Related Lkml discussion can be
      found in [2].
      
       [1] tools/testing/selftests/net/psock_tpacket
       [2] https://lkml.org/lkml/2014/1/10/427Signed-off-by: default avatarVlastimil Babka <vbabka@suse.cz>
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Reported-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Tested-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Cc: Thomas Hellstrom <thellstrom@vmware.com>
      Cc: John David Anglin <dave.anglin@bell.net>
      Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
      Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
      Cc: Carsten Otte <cotte@de.ibm.com>
      Cc: Jared Hulbert <jaredeh@gmail.com>
      Tested-by: default avatarHannes Frederic Sowa <hannes@stressinduktion.org>
      Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Acked-by: default avatarRik van Riel <riel@redhat.com>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: <stable@vger.kernel.org> [3.11.x+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9050d7eb
    • Filipe Brandenburger's avatar
      memcg: reparent charges of children before processing parent · 4fb1a86f
      Filipe Brandenburger authored
      Sometimes the cleanup after memcg hierarchy testing gets stuck in
      mem_cgroup_reparent_charges(), unable to bring non-kmem usage down to 0.
      
      There may turn out to be several causes, but a major cause is this: the
      workitem to offline parent can get run before workitem to offline child;
      parent's mem_cgroup_reparent_charges() circles around waiting for the
      child's pages to be reparented to its lrus, but it's holding
      cgroup_mutex which prevents the child from reaching its
      mem_cgroup_reparent_charges().
      
      Further testing showed that an ordered workqueue for cgroup_destroy_wq
      is not always good enough: percpu_ref_kill_and_confirm's call_rcu_sched
      stage on the way can mess up the order before reaching the workqueue.
      
      Instead, when offlining a memcg, call mem_cgroup_reparent_charges() on
      all its children (and grandchildren, in the correct order) to have their
      charges reparented first.
      
      Fixes: e5fca243 ("cgroup: use a dedicated workqueue for cgroup destruction")
      Signed-off-by: default avatarFilipe Brandenburger <filbranden@google.com>
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Reviewed-by: default avatarTejun Heo <tj@kernel.org>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: <stable@vger.kernel.org>	[v3.10+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4fb1a86f
    • Hugh Dickins's avatar
      memcg: fix endless loop in __mem_cgroup_iter_next() · ce48225f
      Hugh Dickins authored
      Commit 0eef6156 ("memcg: fix css reference leak and endless loop in
      mem_cgroup_iter") got the interaction with the commit a few before it
      d8ad3055 ("mm/memcg: iteration skip memcgs not yet fully
      initialized") slightly wrong, and we didn't notice at the time.
      
      It's elusive, and harder to get than the original, but for a couple of
      days before rc1, I several times saw a endless loop similar to that
      supposedly being fixed.
      
      This time it was a tighter loop in __mem_cgroup_iter_next(): because we
      can get here when our root has already been offlined, and the ordering
      of conditions was such that we then just cycled around forever.
      
      Fixes: 0eef6156 ("memcg: fix css reference leak and endless loop in mem_cgroup_iter").
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Cc: Greg Thelen <gthelen@google.com>
      Cc: <stable@vger.kernel.org>	[3.12+]
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ce48225f
    • Hugh Dickins's avatar
      lib/radix-tree.c: swapoff tmpfs radix_tree: remember to rcu_read_unlock · 5f30fc94
      Hugh Dickins authored
      Running fsx on tmpfs with concurrent memhog-swapoff-swapon, lots of
      
        BUG: sleeping function called from invalid context at kernel/fork.c:606
        in_atomic(): 0, irqs_disabled(): 0, pid: 1394, name: swapoff
        1 lock held by swapoff/1394:
         #0:  (rcu_read_lock){.+.+.+}, at: [<ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
      
      followed by
      
        ================================================
        [ BUG: lock held when returning to user space! ]
        3.14.0-rc1 #3 Not tainted
        ------------------------------------------------
        swapoff/1394 is leaving the kernel with locks still held!
        1 lock held by swapoff/1394:
         #0:  (rcu_read_lock){.+.+.+}, at: [<ffffffff812520a1>] radix_tree_locate_item+0x1f/0x2b6
      
      after which the system recovered nicely.
      
      Whoops, I long ago forgot the rcu_read_unlock() on one unlikely branch.
      
      Fixes e504f3fd ("tmpfs radix_tree: locate_item to speed up swapoff")
      Signed-off-by: default avatarHugh Dickins <hughd@google.com>
      Cc: Johannes Weiner <hannes@cmpxchg.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5f30fc94
    • Dan Williams's avatar
      dma debug: account for cachelines and read-only mappings in overlap tracking · 3b7a6418
      Dan Williams authored
      While debug_dma_assert_idle() checks if a given *page* is actively
      undergoing dma the valid granularity of a dma mapping is a *cacheline*.
      Sander's testing shows that the warning message "DMA-API: exceeded 7
      overlapping mappings of pfn..." is falsely triggering.  The test is
      simply mapping multiple cachelines in a given page.
      
      Ultimately we want overlap tracking to be valid as it is a real api
      violation, so we need to track active mappings by cachelines.  Update
      the active dma tracking to use the page-frame-relative cacheline of the
      mapping as the key, and update debug_dma_assert_idle() to check for all
      possible mapped cachelines for a given page.
      
      However, the need to track active mappings is only relevant when the
      dma-mapping is writable by the device.  In fact it is fairly standard
      for read-only mappings to have hundreds or thousands of overlapping
      mappings at once.  Limiting the overlap tracking to writable
      (!DMA_TO_DEVICE) eliminates this class of false-positive overlap
      reports.
      
      Note, the radix gang lookup is sub-optimal.  It would be best if it
      stopped fetching entries once the search passed a page boundary.
      Nevertheless, this implementation does not perturb the original net_dma
      failing case.  That is to say the extra overhead does not show up in
      terms of making the failing case pass due to a timing change.
      
      References:
        http://marc.info/?l=linux-netdev&m=139232263419315&w=2
        http://marc.info/?l=linux-netdev&m=139217088107122&w=2Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Reported-by: default avatarSander Eikelenboom <linux@eikelenboom.it>
      Reported-by: default avatarDave Jones <davej@redhat.com>
      Tested-by: default avatarDave Jones <davej@redhat.com>
      Tested-by: default avatarSander Eikelenboom <linux@eikelenboom.it>
      Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
      Cc: Francois Romieu <romieu@fr.zoreil.com>
      Cc: Eric Dumazet <eric.dumazet@gmail.com>
      Cc: Wei Liu <wei.liu2@citrix.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3b7a6418
    • David Rientjes's avatar
      mm: close PageTail race · 668f9abb
      David Rientjes authored
      Commit bf6bddf1 ("mm: introduce compaction and migration for
      ballooned pages") introduces page_count(page) into memory compaction
      which dereferences page->first_page if PageTail(page).
      
      This results in a very rare NULL pointer dereference on the
      aforementioned page_count(page).  Indeed, anything that does
      compound_head(), including page_count() is susceptible to racing with
      prep_compound_page() and seeing a NULL or dangling page->first_page
      pointer.
      
      This patch uses Andrea's implementation of compound_trans_head() that
      deals with such a race and makes it the default compound_head()
      implementation.  This includes a read memory barrier that ensures that
      if PageTail(head) is true that we return a head page that is neither
      NULL nor dangling.  The patch then adds a store memory barrier to
      prep_compound_page() to ensure page->first_page is set.
      
      This is the safest way to ensure we see the head page that we are
      expecting, PageTail(page) is already in the unlikely() path and the
      memory barriers are unfortunately required.
      
      Hugetlbfs is the exception, we don't enforce a store memory barrier
      during init since no race is possible.
      Signed-off-by: default avatarDavid Rientjes <rientjes@google.com>
      Cc: Holger Kiehl <Holger.Kiehl@dwd.de>
      Cc: Christoph Lameter <cl@linux.com>
      Cc: Rafael Aquini <aquini@redhat.com>
      Cc: Vlastimil Babka <vbabka@suse.cz>
      Cc: Michal Hocko <mhocko@suse.cz>
      Cc: Mel Gorman <mgorman@suse.de>
      Cc: Andrea Arcangeli <aarcange@redhat.com>
      Cc: Rik van Riel <riel@redhat.com>
      Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
      Cc: <stable@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      668f9abb
    • Borislav Petkov's avatar
      MAINTAINERS: EDAC: add Mauro and Borislav as interim patch collectors · aa15aa0e
      Borislav Petkov authored
      We're more or less collecting EDAC patches already anyway so let's hold it
      down so that get_maintainer sees it too.
      Signed-off-by: default avatarBorislav Petkov <bp@suse.de>
      Acked-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
      Cc: Doug Thompson <dougthompson@xmission.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aa15aa0e
  3. 03 Mar, 2014 4 commits
    • Vlad Yasevich's avatar
      macvlan: Add support for 'always_on' offload features · 8b4703e9
      Vlad Yasevich authored
      Macvlan currently inherits all of its features from the lower
      device.  When lower device disables offload support, this causes
      macvlan to disable offload support as well.  This causes
      performance regression when using macvlan/macvtap in bridge
      mode.
      
      It can be easily demonstrated by creating 2 namespaces using
      macvlan in bridge mode and running netperf between them:
      
      MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET
      Recv   Send    Send
      Socket Socket  Message  Elapsed
      Size   Size    Size     Time     Throughput
      bytes  bytes   bytes    secs.    10^6bits/sec
      
       87380  16384  16384    20.00    1204.61
      
      To restore the performance, we add software offload features
      to the list of "always_on" features for macvlan.  This way
      when a namespace or a guest using macvtap initially sends a
      packet, this packet will not be segmented at macvlan level.
      It will only be segmented when macvlan sends the packet
      to the lower device.
      
      MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET
      Recv   Send    Send
      Socket Socket  Message  Elapsed
      Size   Size    Size     Time     Throughput
      bytes  bytes   bytes    secs.    10^6bits/sec
      
       87380  16384  16384    20.00    5507.35
      
      Fixes: 6acf54f1 (macvtap: Add support of packet capture on macvtap device.)
      Fixes: 797f87f8 (macvlan: fix netdev feature propagation from lower device)
      CC: Florian Westphal <fw@strlen.de>
      CC: Christian Borntraeger <borntraeger@de.ibm.com>
      CC: Jason Wang <jasowang@redhat.com>
      CC: Michael S. Tsirkin <mst@redhat.com>
      Tested-by: default avatarChristian Borntraeger <borntraeger@de.ibm.com>
      Signed-off-by: default avatarVlad Yasevich <vyasevic@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8b4703e9
    • David S. Miller's avatar
      Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless · 48235515
      David S. Miller authored
      John W. Linville says:
      
      ====================
      Please pull this batch of fixes intended for the 3.14 stream...
      
      For the mac80211 bits, Johannes says:
      
      "This time I have a fix to get out of an 'infinite error state' in case
      regulatory domain updates failed and two fixes for VHT associations: one
      to not disconnect immediately when the AP uses more bandwidth than the
      new regdomain would allow after a change due to association country
      information getting used, and one for an issue in the code where
      mac80211 doesn't correctly ignore a reserved field and then uses an HT
      instead of VHT association."
      
      For the iwlwifi bits, Emmanuel says:
      
      "Johannes fixes a long standing bug in the AMPDU status reporting.
      Max fixes the listen time which was way too long and causes trouble
      to several APs."
      
      Along with those, Bing Zhao marks the mwifiex_usb driver as _not_
      supporting USB autosuspend after a number of problems with that have
      been reported.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      48235515
    • Daniel Borkmann's avatar
      net: sctp: fix sctp_sf_do_5_1D_ce to verify if we/peer is AUTH capable · ec0223ec
      Daniel Borkmann authored
      RFC4895 introduced AUTH chunks for SCTP; during the SCTP
      handshake RANDOM; CHUNKS; HMAC-ALGO are negotiated (CHUNKS
      being optional though):
      
        ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
        <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
        -------------------- COOKIE-ECHO -------------------->
        <-------------------- COOKIE-ACK ---------------------
      
      A special case is when an endpoint requires COOKIE-ECHO
      chunks to be authenticated:
      
        ---------- INIT[RANDOM; CHUNKS; HMAC-ALGO] ---------->
        <------- INIT-ACK[RANDOM; CHUNKS; HMAC-ALGO] ---------
        ------------------ AUTH; COOKIE-ECHO ---------------->
        <-------------------- COOKIE-ACK ---------------------
      
      RFC4895, section 6.3. Receiving Authenticated Chunks says:
      
        The receiver MUST use the HMAC algorithm indicated in
        the HMAC Identifier field. If this algorithm was not
        specified by the receiver in the HMAC-ALGO parameter in
        the INIT or INIT-ACK chunk during association setup, the
        AUTH chunk and all the chunks after it MUST be discarded
        and an ERROR chunk SHOULD be sent with the error cause
        defined in Section 4.1. [...] If no endpoint pair shared
        key has been configured for that Shared Key Identifier,
        all authenticated chunks MUST be silently discarded. [...]
      
        When an endpoint requires COOKIE-ECHO chunks to be
        authenticated, some special procedures have to be followed
        because the reception of a COOKIE-ECHO chunk might result
        in the creation of an SCTP association. If a packet arrives
        containing an AUTH chunk as a first chunk, a COOKIE-ECHO
        chunk as the second chunk, and possibly more chunks after
        them, and the receiver does not have an STCB for that
        packet, then authentication is based on the contents of
        the COOKIE-ECHO chunk. In this situation, the receiver MUST
        authenticate the chunks in the packet by using the RANDOM
        parameters, CHUNKS parameters and HMAC_ALGO parameters
        obtained from the COOKIE-ECHO chunk, and possibly a local
        shared secret as inputs to the authentication procedure
        specified in Section 6.3. If authentication fails, then
        the packet is discarded. If the authentication is successful,
        the COOKIE-ECHO and all the chunks after the COOKIE-ECHO
        MUST be processed. If the receiver has an STCB, it MUST
        process the AUTH chunk as described above using the STCB
        from the existing association to authenticate the
        COOKIE-ECHO chunk and all the chunks after it. [...]
      
      Commit bbd0d598 introduced the possibility to receive
      and verification of AUTH chunk, including the edge case for
      authenticated COOKIE-ECHO. On reception of COOKIE-ECHO,
      the function sctp_sf_do_5_1D_ce() handles processing,
      unpacks and creates a new association if it passed sanity
      checks and also tests for authentication chunks being
      present. After a new association has been processed, it
      invokes sctp_process_init() on the new association and
      walks through the parameter list it received from the INIT
      chunk. It checks SCTP_PARAM_RANDOM, SCTP_PARAM_HMAC_ALGO
      and SCTP_PARAM_CHUNKS, and copies them into asoc->peer
      meta data (peer_random, peer_hmacs, peer_chunks) in case
      sysctl -w net.sctp.auth_enable=1 is set. If in INIT's
      SCTP_PARAM_SUPPORTED_EXT parameter SCTP_CID_AUTH is set,
      peer_random != NULL and peer_hmacs != NULL the peer is to be
      assumed asoc->peer.auth_capable=1, in any other case
      asoc->peer.auth_capable=0.
      
      Now, if in sctp_sf_do_5_1D_ce() chunk->auth_chunk is
      available, we set up a fake auth chunk and pass that on to
      sctp_sf_authenticate(), which at latest in
      sctp_auth_calculate_hmac() reliably dereferences a NULL pointer
      at position 0..0008 when setting up the crypto key in
      crypto_hash_setkey() by using asoc->asoc_shared_key that is
      NULL as condition key_id == asoc->active_key_id is true if
      the AUTH chunk was injected correctly from remote. This
      happens no matter what net.sctp.auth_enable sysctl says.
      
      The fix is to check for net->sctp.auth_enable and for
      asoc->peer.auth_capable before doing any operations like
      sctp_sf_authenticate() as no key is activated in
      sctp_auth_asoc_init_active_key() for each case.
      
      Now as RFC4895 section 6.3 states that if the used HMAC-ALGO
      passed from the INIT chunk was not used in the AUTH chunk, we
      SHOULD send an error; however in this case it would be better
      to just silently discard such a maliciously prepared handshake
      as we didn't even receive a parameter at all. Also, as our
      endpoint has no shared key configured, section 6.3 says that
      MUST silently discard, which we are doing from now onwards.
      
      Before calling sctp_sf_pdiscard(), we need not only to free
      the association, but also the chunk->auth_chunk skb, as
      commit bbd0d598 created a skb clone in that case.
      
      I have tested this locally by using netfilter's nfqueue and
      re-injecting packets into the local stack after maliciously
      modifying the INIT chunk (removing RANDOM; HMAC-ALGO param)
      and the SCTP packet containing the COOKIE_ECHO (injecting
      AUTH chunk before COOKIE_ECHO). Fixed with this patch applied.
      
      Fixes: bbd0d598 ("[SCTP]: Implement the receive and verification of AUTH chunk")
      Signed-off-by: default avatarDaniel Borkmann <dborkman@redhat.com>
      Cc: Vlad Yasevich <yasevich@gmail.com>
      Cc: Neil Horman <nhorman@tuxdriver.com>
      Acked-by: default avatarVlad Yasevich <vyasevich@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ec0223ec
    • David S. Miller's avatar
      Merge tag 'linux-can-fixes-for-3.14-20140303' of git://gitorious.org/linux-can/linux-can · 82f19183
      David S. Miller authored
      linux-can-fixes-for-3.14-20140303
      
      Marc Kleine-Budde says:
      
      ====================
      this is a pull request of 8 patches. Oliver Hartkopp contributes a patch which
      removes the CAN FD compatibility for CAN 2.0 sockets, as it turns out that this
      compatibility has some conceptual cornercases. The remaining 7 patches are by
      me, they address a problem in the flexcan driver. When shutting down the
      interface ("ifconfig can0 down") under heavy network load the whole system will
      hang. This series reworks the actual sequence in close() and the transition
      from and to the low power modes of the CAN controller.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      82f19183