The typedef parser is wrong and doesn't get some of the
types defined at the DVB API. Improve it, as we want to add
cross-references to those types.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

There are a few issues at FE_GET_INFO documentation:
- name is a string, not a pointer to a string;
- the return text should be after the paragraph.

While here, better to bold that two fields of the structure used
by FE_GET_INFO are actually deprecated.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of using programlisting, use a table, as this provides
a better view of the structure.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The fe_type is deprecated at the DVB API. However, it may still
be used by legacy DVBv3 applications. While this works with old
devices, modern devices may support more than one delivery
system.

Add an explanation about that and a point to what should be
used, instead, in order for legacy apps to support newer hardware.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of just showing ioctls, let's add an introdutory text
briefly explaining the DVB frontend API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

What's written there about the arguments for this ioctl
is bogus: it doesn't return an enum (or a typedef)
for enum fe_status. Instead, it returns a bitmask with the
values defined by enum fe_status.

Also, the size of the integer returned is not 16 bits, but,
instead, sizeof(fe_status_t), e. g. sizeof(enum), with is
arch-dependent.

This should of course be fixed, but this should be done on
a separate patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Move the function ioctl definitions to the end of the chapter,
at their importance. That makes the document better organized,
as the DVB frontend system call index will look like:

	open()
	close()
	ioctl FE_GET_INFO — Query DVB frontend capabilities and returns information about the front-end. This call only requires read-only access to the device
	ioctl FE_READ_STATUS — Returns status information about the front-end. This call only requires read-only access to the device
	ioctl FE_SET_PROPERTY, FE_GET_PROPERTY — FE_SET_PROPERTY sets one or more frontend properties. FE_GET_PROPERTY returns one or more frontend properties.
	ioctl FE_DISEQC_RESET_OVERLOAD — Restores the power to the antenna subsystem, if it was powered off due to power overload.
	ioctl FE_DISEQC_SEND_MASTER_CMD — Sends a DiSEqC command
	ioctl FE_DISEQC_RECV_SLAVE_REPLY — Receives reply from a DiSEqC 2.0 command
	ioctl FE_DISEQC_SEND_BURST — Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection.
	ioctl FE_SET_TONE — Sets/resets the generation of the continuous 22kHz tone.
	ioctl FE_SET_VOLTAGE — Allow setting the DC level sent to the antenna subsystem.
	ioctl FE_ENABLE_HIGH_LNB_VOLTAGE — Select output DC level between normal LNBf voltages or higher LNBf voltages.
	ioctl FE_SET_FRONTEND_TUNE_MODE — Allow setting tuner mode flags to the frontend.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the new format for the ioctl documentation and put the
struct dvb_diseqc_slave_reply together with the ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the new format for the ioctl documentation and put the
struct dvb_diseqc_slave_reply together with the ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the new format for the ioctl documentation and put the
struct dvb_diseqc_slave_reply together with the ioctl.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_DISEQC_SEND_BURST documentation
and  improve the documentation.

Keep the enum fe_sec_mini_cmd description together with
the ioctl, as both are used together.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_SET_TONE documentation and
improve the documentation.

Keep the enum fe_sec_tone_mode description together with
the ioctl, as both are used together.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_SET_VOLTAGE documentation and fix
the documentation. The description for the enum is not 100%,
and it is missing the voltage off value.

Also, it is better to keep the enum description together with
the ioctl, as both are used together.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_ENABLE_HIGH_LNB_VOLTAGE documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the proper format for FE_SET_FRONTEND_TUNE_MODE documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

That helps the xref logic at the Makefile to point to the
right place. Also, it becomes more organized and easier to
maintain if each ioctl have its own xml file.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

for the xml files describing ioctls, use the same nomenclature
as on V4L2: the ioctl name, in lower case, using - instead of _.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The new code that detects undocumented ioctls hits some false
positives:

This one is not documented, nor it should, as this is
there just to reserve namespace:

	Warning: can't find reference for VIDIOC_RESERVED ioctl

But those are already documented together with other ioctls:

	Warning: can't find reference for VIDIOC_UNSUBSCRIBE_EVENT ioctl
	Warning: can't find reference for FE_GET_PROPERTY ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_G_EDID ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_S_EDID ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_S_DV_TIMINGS ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_G_DV_TIMINGS ioctl
	Warning: can't find reference for VIDIOC_SUBDEV_QUERY_DV_TIMINGS ioctl

So, we need to just be sure to point to the right documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Those ioctls are already parsed. No need to explicitly add
them.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

There are several badly documented undocumented ioctls.
Currently, it just generates an empty link. Instead of doing that,
only add references to the ones that exists, and add a warning
for all references that weren't found.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Create xref links for all DTV properties and link the frontend.h
to each. Also use them at the DVB frontent API example.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Make the text clearer about what the properties API does.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of having two refentries, merge them into just one,
like what's done with other similar ioctls at V4L2 side.

That makes the entry cleaner and will allow to add the associated
structures together with the refentry.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Instead of going to the V4L2 open(), use the xref to the
proper place at the frontend ioctls that were already
reformatted.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Use the standard way of documenting ioctls for FE_GET_PROPERTY
and FE_SET_PROPERTY.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVBv5 API uses DVB properties as the main way to set the frontend
and collect statistics. Move the definition to happen earlier, in
order to reflect its importance.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Move the ioctl and enum fe_status to a separate xml file and
put it into a better format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Keeping everything altogether makes harder to reorganize the
DocBook. So, move the FE_GET_INFO ioctl and the associated structures
into a separate file.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB part of the docbook has a completely different format
than the V4L2 part, as it was written as a separate document.

As the V4L2 documentation is on better shape, and its format
allows adding more information, let's use it for FE_GET_INFO
and gradually update the non-legacy DVB ioctls using the new
format.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Using typedefs is already bad enough, but doing it together
with enum declaration is even worse.

Also, it breaks the scripts at DocBook that would be generating
reference pointers for the enums.

Well, we can't get rid of typedef right now, but let's at least
declare it on a separate line, and let the scripts to generate
the cross-reference, as this is needed for the next DocBook
patches.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Although the recommended usage is the DVBv5 API calls, the
documentation doesn't make it clear about what's the recommended
calls and what's legacy.

So, move the legacy API bits to a separate xml, putting them into
a new section.

Please notice that more changes are needed, since some of the
bits there are cross-referenced elsewhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The DVB frontend API got bitrotten. Update it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Currently, it is using 'role="tt"', but this is not defined at
the DocBook 4.5 spec. The net result is that no emphasis happens.

So, replace them to bold emphasis.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

An illustration of what's considered a typical media device
may help people to better understand the contents of the media
infrastructure API docbook. So, add it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The Docbook mistakenly makes to believe that all needed APIs for
media devices are there. Add a note there pointing that some
sub-devices are actually be controlled via ALSA API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The list of standards at the media docbook is incomplete, and it
is mentioning that the DVB-S2 & friends is "currently being updated".
That's wrong, as such update occurred back in 2008.

So, provide a more complete list of supported standards and add
a reference to the actual list.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The ucblocks register is probably a counter and not a rate; assume
it is so and change the calculations as required.
Signed-off-by: Jemma Denson <jdenson@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Frontend bandwidth calculation overflows on very high DVB-S/S2
symbol rates. Use mult_frac() macro in order to keep calculation
correct.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:

drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long
drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90
   .rangehigh  =  2208000000,
   ^

Cc: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Implement V4L2 subdevice tuner and core ops. After that this driver
is hybrid driver implementing both V4L2 and DVB ops.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>