- 17 Jun, 2017 15 commits
-
-
Ricardo Ribalda authored
[ Upstream commit f43128c7 ] Since '701dc207 ("i2c: piix4: Avoid race conditions with IMC")' we are using the SMBSLVCNT register at offset 0x8. We need to request it. Fixes: 701dc207 ("i2c: piix4: Avoid race conditions with IMC") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan Brüns authored
[ Upstream commit 5a70348e ] If a context is configured as dualstack ("IPv4v6"), the modem indicates the context activation with a slightly different indication message. The dual-stack indication omits the link_type (IPv4/v6) and adds additional address fields. IPv6 LSIs are identical to IPv4 LSIs, but have a different link type. Signed-off-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Reviewed-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefan Brüns authored
[ Upstream commit 764895d3 ] When the context is deactivated, the link_type is set to 0xff, which triggers a warning message, and results in a wrong link status, as the LSI is ignored. Signed-off-by:
-
Kejian Yan authored
[ Upstream commit b85ea006 ] This patch fixes the device being used to DMA map skb->data. Erroneous device assignment causes the crash when SMMU is enabled. This happens during TX since buffer gets DMA mapped with device correspondign to net_device and gets unmapped using the device related to DSAF. Signed-off-by:
Kejian Yan <yankejian@huawei.com> Reviewed-by:
Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Ralf Baechle authored
[ Upstream commit 7ba1b689 ] If a USB-to-serial adapter is unplugged, the driver re-initializes, with dev->hard_header_len and dev->addr_len set to zero, instead of the correct values. If then a packet is sent through the half-dead interface, the kernel will panic due to running out of headroom in the skb when pushing for the AX.25 headers resulting in this panic: [<c0595468>] (skb_panic) from [<c0401f70>] (skb_push+0x4c/0x50) [<c0401f70>] (skb_push) from [<bf0bdad4>] (ax25_hard_header+0x34/0xf4 [ax25]) [<bf0bdad4>] (ax25_hard_header [ax25]) from [<bf0d05d4>] (ax_header+0x38/0x40 [mkiss]) [<bf0d05d4>] (ax_header [mkiss]) from [<c041b584>] (neigh_compat_output+0x8c/0xd8) [<c041b584>] (neigh_compat_output) from [<c043e7a8>] (ip_finish_output+0x2a0/0x914) [<c043e7a8>] (ip_finish_output) from [<c043f948>] (ip_output+0xd8/0xf0) [<c043f948>] (ip_output) from [<c043f04c>] (ip_local_out_sk+0x44/0x48) This patch makes mkiss behave like the 6pack driver. 6pack does not panic. In 6pack.c sp_setup() (same function name here) the values for dev->hard_header_len and dev->addr_len are set to the same values as in my mkiss patch. [ralf@linux-mips.org: Massages original submission to conform to the usual standards for patch submissions.] Signed-off-by:
Thomas Osterried <thomas@osterried.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
[ Upstream commit 4872e57c ] When sending ARP requests over AX.25 links the hwaddress in the neighbour cache are not getting initialized. For such an incomplete arp entry ax2asc2 will generate an empty string resulting in /proc/net/arp output like the following: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 172.20.1.99 0x3 0x0 * bpq0 The missing field will confuse the procfs parsing of arp(8) resulting in incorrect output for the device such as the following: $ arp Address HWtype HWaddress Flags Mask Iface gateway ether 52:54:00:00:5d:5f C ens3 172.20.1.99 (incomplete) ens3 This changes the content of /proc/net/arp to: $ cat /proc/net/arp IP address HW type Flags HW address Mask Device 172.20.1.99 0x3 0x0 * * bpq0 192.168.122.1 0x1 0x2 52:54:00:00:5d:5f * ens3 To do so it change ax2asc to put the string "*" in buf for a NULL address argument. Finally the HW address field is left aligned in a 17 character field (the length of an ethernet HW address in the usual hex notation) for readability. Signed-off-by:
-
Jonathan T. Leighton authored
[ Upstream commit ec5e3b0a ] This patch adds a check for the problematic case of an IPv4-mapped IPv6 source address and a destination address that is neither an IPv4-mapped IPv6 address nor in6addr_any, and returns an appropriate error. The check in done before returning from looking up the route. Signed-off-by:
Jonathan T. Leighton <jtleight@udel.edu> Signed-off-by:
-
Jonathan T. Leighton authored
[ Upstream commit 052d2369 ] This patch adds a check on the type of the source address for the case where the destination address is in6addr_any. If the source is an IPv4-mapped IPv6 source address, the destination is changed to ::ffff:127.0.0.1, and otherwise the destination is changed to ::1. This is done in three locations to handle UDP calls to either connect() or sendmsg() and TCP calls to connect(). Note that udpv6_sendmsg() delays handling an in6addr_any destination until very late, so the patch only needs to handle the case where the source is an IPv4-mapped IPv6 address. Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit cd224553 ] xilinx_emaclite looks at the received data to try to determine the Ethernet packet length but does not properly clamp it if proto_type == ETH_P_IP or 1500 < proto_type <= 1518, causing a buffer overflow and a panic via skb_panic() as the length exceeds the allocated skb size. Fix those cases. Also add an additional unconditional check with WARN_ON() at the end. Signed-off-by:
Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: bb81b2dd ("net: add Xilinx emac lite device driver") Signed-off-by:
-
Anssi Hannula authored
[ Upstream commit acf138f1 ] The xilinx_emaclite uses __raw_writel and __raw_readl for register accesses. Those functions do not imply any kind of memory barriers and they may be reordered. The driver does not seem to take that into account, though, and the driver does not satisfy the ordering requirements of the hardware. For clear examples, see xemaclite_mdio_write() and xemaclite_mdio_read() which try to set MDIO address before initiating the transaction. I'm seeing system freezes with the driver with GCC 5.4 and current Linux kernels on Zynq-7000 SoC immediately when trying to use the interface. In commit 123c1407 ("net: emaclite: Do not use microblaze and ppc IO functions") the driver was switched from non-generic in_be32/out_be32 (memory barriers, big endian) to __raw_readl/__raw_writel (no memory barriers, native endian), so apparently the device follows system endianness and the driver was originally written with the assumption of memory barriers. Rather than try to hunt for each case of missing barrier, just switch the driver to use iowrite32/ioread32/iowrite32be/ioread32be depending on endianness instead. Tested on little-endian Zynq-7000 ARM SoC FPGA. Signed-off-by:
-
Sachin Prabhu authored
commit b8c60012 upstream. Commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect long after socket reconnect") changes the behaviour of the SMB2 echo service and causes it to renegotiate after a socket reconnect. However under default settings, the echo service could take up to 120 seconds to be scheduled. The patch forces the echo service to be called immediately resulting a negotiate call being made immediately on reconnect. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Acked-by:
-
Malcolm Priestley authored
commit baabd567 upstream. The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Fabio Estevam authored
commit 46350b71 upstream. Table 8 from MX6DL datasheet (IMX6SDLCEC Rev. 5, 06/2015): http://cache.nxp.com/files/32bit/doc/data_sheet/IMX6SDLCEC.pdf states the following: "LDO Output Set Point (VDD_ARM_CAP) = 1.125 V minimum for operation up to 396 MHz." So fix the entry by adding the 25mV margin value as done in the other entries of the table, which results in 1.15V for 396MHz operation. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Cc: Stephane Fillod <f8cfe@free.fr> Signed-off-by:
-
Richard authored
commit 22322035 upstream. The code in block/partitions/msdos.c recognizes FreeBSD, OpenBSD and NetBSD partitions and does a reasonable job picking out OpenBSD and NetBSD UFS subpartitions. But for FreeBSD the subpartitions are always "bad". Kernel: <bsd:bad subpartition - ignored Though all 3 of these BSD systems use UFS as a file system, only FreeBSD uses relative start addresses in the subpartition declarations. The following patch fixes this for FreeBSD partitions and leaves the code for OpenBSD and NetBSD intact: Signed-off-by:
Richard Narron <comet.berkeley@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Heiko Carstens authored
commit c34a6905 upstream. The identity mapping is suboptimal for the last 2GB frame. The mapping will be established with a mix of 4KB and 1MB mappings instead of a single 2GB mapping. This happens because of a off-by-one bug introduced with commit 50be6345 ("s390/mm: Convert bootmem to memblock"). Currently the identity mapping looks like this: 0x0000000080000000-0x0000000180000000 4G PUD RW 0x0000000180000000-0x00000001fff00000 2047M PMD RW 0x00000001fff00000-0x0000000200000000 1M PTE RW With the bug fixed it looks like this: 0x0000000080000000-0x0000000200000000 6G PUD RW Fixes: 50be6345 ("s390/mm: Convert bootmem to memblock") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
- 14 Jun, 2017 25 commits
-
-
Greg Kroah-Hartman authored
-
Mark Rutland authored
commit 994870be upstream. When an inline assembly operand's type is narrower than the register it is allocated to, the least significant bits of the register (up to the operand type's width) are valid, and any other bits are permitted to contain any arbitrary value. This aligns with the AAPCS64 parameter passing rules. Our __smp_store_release() implementation does not account for this, and implicitly assumes that operands have been zero-extended to the width of the type being stored to. Thus, we may store unknown values to memory when the value type is narrower than the pointer type (e.g. when storing a char to a long). This patch fixes the issue by casting the value operand to the same width as the pointer operand in all cases, which ensures that the value is zero-extended as we expect. We use the same union trickery as __smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that pointers are potentially cast to narrower width integers in unreachable paths. A whitespace issue at the top of __smp_store_release() is also corrected. No changes are necessary for __smp_load_acquire(). Load instructions implicitly clear any upper bits of the register, and the compiler will only consider the least significant bits of the register as valid regardless. Fixes: 47933ad4 ("arch: Introduce smp_load_acquire(), smp_store_release()") Fixes: 878a84d5 ("arm64: add missing data types in smp_load_acquire/smp_store_release") Cc: <stable@vger.kernel.org> # 3.14.x- Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Mark Rutland authored
commit 55de49f9 upstream. Our compat swp emulation holds the compat user address in an unsigned int, which it passes to __user_swpX_asm(). When a 32-bit value is passed in a register, the upper 32 bits of the register are unknown, and we must extend the value to 64 bits before we can use it as a base address. This patch casts the address to unsigned long to ensure it has been suitably extended, avoiding the potential issue, and silencing a related warning from clang. Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm") Cc: <stable@vger.kernel.org> # 3.19.x- Acked-by:
-
Kees Cook authored
commit f5f893c5 upstream. Under SMAP/PAN/etc, we cannot write directly to userspace memory, so this rearranges the test bytes to get written through copy_to_user(). Additionally drops the bad copy_from_user() test that would trigger a memcpy() against userspace on failure. [arnd: the test module was added in 3.14, and this backported patch should apply cleanly on all version from 3.14 to 4.10. The original patch was in 4.11 on top of a context change I saw the bug triggered with kselftest on a 4.4.y stable kernel] Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Mike Marciniszyn authored
commit 1feb4006 upstream. The handling of IB_RDMA_WRITE_ONLY_WITH_IMMEDIATE will leak a memory reference when a buffer cannot be allocated for returning the immediate data. The issue is that the rkey validation has already occurred and the RNR nak fails to release the reference that was fruitlessly gotten. The the peer will send the identical single packet request when its RNR timer pops. The fix is to release the held reference prior to the rnr nak exit. This is the only sequence the requires both rkey validation and the buffer allocation on the same packet. Cc: Stable <stable@vger.kernel.org> # 4.7+ Tested-by:
Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Kristina Martsenko authored
commit 276e9327 upstream. This backport has a minor difference from the upstream commit: it adds the asm-uaccess.h file, which is not present in 4.4, because 4.4 does not have commit b4b8664d ("arm64: don't pull uaccess.h into *.S"). Original patch description: When handling a data abort from EL0, we currently zero the top byte of the faulting address, as we assume the address is a TTBR0 address, which may contain a non-zero address tag. However, the address may be a TTBR1 address, in which case we should not zero the top byte. This patch fixes that. The effect is that the full TTBR1 address is passed to the task's signal handler (or printed out in the kernel log). When handling a data abort from EL1, we leave the faulting address intact, as we assume it's either a TTBR1 address or a TTBR0 address with tag 0x00. This is true as far as I'm aware, we don't seem to access a tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to forget about address tags, and code added in the future may not always remember to remove tags from addresses before accessing them. So add tag handling to the EL1 data abort handler as well. This also makes it consistent with the EL0 data abort handler. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
-
Kristina Martsenko authored
commit 7dcd9dd8 upstream. This backport has a few small differences from the upstream commit: - The address tag is removed in watchpoint_handler() instead of get_distance_from_watchpoint(), because 4.4 does not have commit fdfeff0f ("arm64: hw_breakpoint: Handle inexact watchpoint addresses"). - A macro is backported (untagged_addr), as it is not present in 4.4. Original patch description: When we take a watchpoint exception, the address that triggered the watchpoint is found in FAR_EL1. We compare it to the address of each configured watchpoint to see which one was hit. The configured watchpoint addresses are untagged, while the address in FAR_EL1 will have an address tag if the data access was done using a tagged address. The tag needs to be removed to compare the address to the watchpoints. Currently we don't remove it, and as a result can report the wrong watchpoint as being hit (specifically, always either the highest TTBR0 watchpoint or lowest TTBR1 watchpoint). This patch removes the tag. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Acked-by:
-
Artem Savkov authored
commit 791cc43b upstream. Commit 2a6fba6d "xfs: only return -errno or success from attr ->put_listent" changes the returnvalue of __xfs_xattr_put_listen to 0 in case when there is insufficient space in the buffer assuming that setting context->count to -1 would be enough, but all of the ->put_listent callers only check seen_enough. This results in a failed assertion: XFS: Assertion failed: context->count >= 0, file: fs/xfs/xfs_xattr.c, line: 175 in insufficient buffer size case. This is only reproducible with at least 2 xattrs and only when the buffer gets depleted before the last one. Furthermore if buffersize is such that it is enough to hold the last xattr's name, but not enough to hold the sum of preceeding xattr names listxattr won't fail with ERANGE, but will suceed returning last xattr's name without the first character. The first character end's up overwriting data stored at (context->alist - 1). Signed-off-by:
Artem Savkov <asavkov@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Cc: Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Trond Myklebust authored
commit 762674f8 upstream. Donald Buczek reports that a nfs4 client incorrectly denies execute access based on outdated file mode (missing 'x' bit). After the mode on the server is 'fixed' (chmod +x) further execution attempts continue to fail, because the nfs ACCESS call updates the access parameter but not the mode parameter or the mode in the inode. The root cause is ultimately that the VFS is calling may_open() before the NFS client has a chance to OPEN the file and hence revalidate the access and attribute caches. Al Viro suggests: >>> Make nfs_permission() relax the checks when it sees MAY_OPEN, if you know >>> that things will be caught by server anyway? >> >> That can work as long as we're guaranteed that everything that calls >> inode_permission() with MAY_OPEN on a regular file will also follow up >> with a vfs_open() or dentry_open() on success. Is this always the >> case? > > 1) in do_tmpfile(), followed by do_dentry_open() (not reachable by NFS since > it doesn't have ->tmpfile() instance anyway) > > 2) in atomic_open(), after the call of ->atomic_open() has succeeded. > > 3) in do_last(), followed on success by vfs_open() > > That's all. All calls of inode_permission() that get MAY_OPEN come from > may_open(), and there's no other callers of that puppy. Reported-by:
Donald Buczek <buczek@molgen.mpg.de> Link: https://bugzilla.kernel.org/show_bug.cgi?id=109771 Link: http://lkml.kernel.org/r/1451046656-26319-1-git-send-email-buczek@molgen.mpg.de Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Trond Myklebust authored
commit 5c5fc09a upstream. Donald Buczek reports that NFS clients can also report incorrect results for access() due to lack of revalidation of attributes before calling execute_ok(). Looking closely, it seems chdir() is afflicted with the same problem. Fix is to ensure we call nfs_revalidate_inode_rcu() or nfs_revalidate_inode() as appropriate before deciding to trust execute_ok(). Reported-by:
-
Michal Hocko authored
commit 864b9a39 upstream. We have seen an early OOM killer invocation on ppc64 systems with crashkernel=4096M: kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0 kthreadd cpuset=/ mems_allowed=7 CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1 Call Trace: dump_stack+0xb0/0xf0 (unreliable) dump_header+0xb0/0x258 out_of_memory+0x5f0/0x640 __alloc_pages_nodemask+0xa8c/0xc80 kmem_getpages+0x84/0x1a0 fallback_alloc+0x2a4/0x320 kmem_cache_alloc_node+0xc0/0x2e0 copy_process.isra.25+0x260/0x1b30 _do_fork+0x94/0x470 kernel_thread+0x48/0x60 kthreadd+0x264/0x330 ret_from_kernel_thread+0x5c/0xa4 Mem-Info: active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:0 dirty:0 writeback:0 unstable:0 slab_reclaimable:5 slab_unreclaimable:73 mapped:0 shmem:0 pagetables:0 bounce:0 free:0 free_pcp:0 free_cma:0 Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes lowmem_reserve[]: 0 0 0 0 Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB 0 total pagecache pages 0 pages in swap cache Swap cache stats: add 0, delete 0, find 0/0 Free swap = 0kB Total swap = 0kB 819200 pages RAM 0 pages HighMem/MovableOnly 817481 pages reserved 0 pages cma reserved 0 pages hwpoisoned the reason is that the managed memory is too low (only 110MB) while the rest of the the 50GB is still waiting for the deferred intialization to be done. update_defer_init estimates the initial memoty to initialize to 2GB at least but it doesn't consider any memory allocated in that range. In this particular case we've had Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB) so the low 2GB is mostly depleted. Fix this by considering memblock allocations in the initial static initialization estimation. Move the max_initialise to reset_deferred_meminit and implement a simple memblock_reserved_memory helper which iterates all reserved blocks and sums the size of all that start below the given address. The cumulative size is than added on top of the initial estimation. This is still not ideal because reset_deferred_meminit doesn't consider holes and so reservation might be above the initial estimation whihch we ignore but let's make the logic simpler until we really need to handle more complicated cases. Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Mel Gorman <mgorman@suse.de> Tested-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Eric Dumazet authored
commit 52bd2d62 upstream. skb->sender_cpu and skb->napi_id share a common storage, and we had various bugs about this. We had to call skb_sender_cpu_clear() in some places to not leave a prior skb->napi_id and fool netdev_pick_tx() As suggested by Alexei, we could split the space so that these errors can not happen. 0 value being reserved as the common (not initialized) value, let's reserve [1 .. NR_CPUS] range for valid sender_cpu, and [NR_CPUS+1 .. ~0U] for valid napi_id. This will allow proper busy polling support over tunnels. Signed-off-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
-
Takatoshi Akiyama authored
commit 3c910176 upstream. This patch fixes an issue that kernel panic happens when DMA is enabled and we press enter key while the kernel booting on the serial console. * An interrupt may occur after sci_request_irq(). * DMA transfer area is initialized by setup_timer() in sci_request_dma() and used in interrupt. If an interrupt occurred between sci_request_irq() and setup_timer() in sci_request_dma(), DMA transfer area has not been initialized yet. So, this patch changes the order of sci_request_irq() and sci_request_dma(). Fixes: 73a19e4c ("serial: sh-sci: Add DMA support.") Signed-off-by:
Takatoshi Akiyama <takatoshi.akiyama.kj@ps.hitachi-solutions.com> [Shimoda changes the commit log] Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Peter Hurley authored
commit e9036d06 upstream. When the tty lock is interrupted on attempted re-open, 2 tty krefs are still held. Drop extra kref before returning failure from tty_lock_interruptible(), and drop lookup kref before returning failure from tty_open(). Fixes: 0bfd464d ("tty: Wait interruptibly for tty lock on reopen") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Cc: Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Julius Werner authored
commit 32829da5 upstream. A recent fix to /dev/mem prevents mappings from wrapping around the end of physical address space. However, the check was written in a way that also prevents a mapping reaching just up to the end of physical address space, which may be a valid use case (especially on 32-bit systems). This patch fixes it by checking the last mapped address (instead of the first address behind that) for overflow. Fixes: b299cde2 ("drivers: char: mem: Check for address space wraparound with mmap()") Reported-by:
Nico Huber <nico.h@gmx.de> Signed-off-by:
Julius Werner <jwerner@chromium.org> Signed-off-by:
-
Takashi Iwai authored
commit 4efda5f2 upstream. soc_cleanup_card_resources() call snd_card_free() at the last of its procedure. This turned out to lead to a use-after-free. PCM runtimes have been already removed via soc_remove_pcm_runtimes(), while it's dereferenced later in soc_pcm_free() called via snd_card_free(). The fix is simple: just move the snd_card_free() call to the beginning of the whole procedure. This also gives another benefit: it guarantees that all operations have been shut down before actually releasing the resources, which was racy until now. Reported-and-tested-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ba3021b2 upstream. snd_timer_user_tselect() reallocates the queue buffer dynamically, but it forgot to reset its indices. Since the read may happen concurrently with ioctl and snd_timer_user_tselect() allocates the buffer via kmalloc(), this may lead to the leak of uninitialized kernel-space data, as spotted via KMSAN: BUG: KMSAN: use of unitialized memory in snd_timer_user_read+0x6c4/0xa10 CPU: 0 PID: 1037 Comm: probe Not tainted 4.11.0-rc5+ #2739 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 dump_stack+0x143/0x1b0 lib/dump_stack.c:52 kmsan_report+0x12a/0x180 mm/kmsan/kmsan.c:1007 kmsan_check_memory+0xc2/0x140 mm/kmsan/kmsan.c:1086 copy_to_user ./arch/x86/include/asm/uaccess.h:725 snd_timer_user_read+0x6c4/0xa10 sound/core/timer.c:2004 do_loop_readv_writev fs/read_write.c:716 __do_readv_writev+0x94c/0x1380 fs/read_write.c:864 do_readv_writev fs/read_write.c:894 vfs_readv fs/read_write.c:908 do_readv+0x52a/0x5d0 fs/read_write.c:934 SYSC_readv+0xb6/0xd0 fs/read_write.c:1021 SyS_readv+0x87/0xb0 fs/read_write.c:1018 This patch adds the missing reset of queue indices. Together with the previous fix for the ioctl/read race, we cover the whole problem. Reported-by:
Alexander Potapenko <glider@google.com> Tested-by:
-
Takashi Iwai authored
commit d11662f4 upstream. The read from ALSA timer device, the function snd_timer_user_tread(), may access to an uninitialized struct snd_timer_user fields when the read is concurrently performed while the ioctl like snd_timer_user_tselect() is invoked. We have already fixed the races among ioctls via a mutex, but we seem to have forgotten the race between read vs ioctl. This patch simply applies (more exactly extends the already applied range of) tu->ioctl_lock in snd_timer_user_tread() for closing the race window. Reported-by:
-
Ben Skeggs authored
commit b4e382ca upstream. Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted. The execution list should not require its own locking, the single function that uses it can only be called from a single context. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Sinclair Yeh authored
commit 07678eca upstream. When vmw_gb_surface_define_ioctl() is called with an existing buffer, we end up returning an uninitialized variable in the backup_handle. The fix is to first initialize backup_handle to 0 just to be sure, and second, when a user-provided buffer is found, we will use the req->buffer_handle as the backup_handle. Reported-by:
Murray McAllister <murray.mcallister@insomniasec.com> Signed-off-by:
Sinclair Yeh <syeh@vmware.com> Reviewed-by:
Deepak Rawat <drawat@vmware.com> Signed-off-by:
-
Vladis Dronov authored
commit ee9c4e68 upstream. The 'req->mip_levels' parameter in vmw_gb_surface_define_ioctl() is a user-controlled 'uint32_t' value which is used as a loop count limit. This can lead to a kernel lockup and DoS. Add check for 'req->mip_levels'. References: https://bugzilla.redhat.com/show_bug.cgi?id=1437431Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Reviewed-by:
-
Dan Carpenter authored
commit f0c62e98 upstream. If vmalloc() fails then we need to a bit of cleanup before returning. Fixes: fb1d9738 ("drm/vmwgfx: Add DRM driver for VMware Virtual GPU") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Jin Yao authored
commit cc1582c2 upstream. When doing sampling, for example: perf record -e cycles:u ... On workloads that do a lot of kernel entry/exits we see kernel samples, even though :u is specified. This is due to skid existing. This might be a security issue because it can leak kernel addresses even though kernel sampling support is disabled. The patch drops the kernel samples if exclude_kernel is specified. For example, test on Haswell desktop: perf record -e cycles:u <mgen> perf report --stdio Before patch applied: 99.77% mgen mgen [.] buf_read 0.20% mgen mgen [.] rand_buf_init 0.01% mgen [kernel.vmlinux] [k] apic_timer_interrupt 0.00% mgen mgen [.] last_free_elem 0.00% mgen libc-2.23.so [.] __random_r 0.00% mgen libc-2.23.so [.] _int_malloc 0.00% mgen mgen [.] rand_array_init 0.00% mgen [kernel.vmlinux] [k] page_fault 0.00% mgen libc-2.23.so [.] __random 0.00% mgen libc-2.23.so [.] __strcasestr 0.00% mgen ld-2.23.so [.] strcmp 0.00% mgen ld-2.23.so [.] _dl_start 0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4 0.00% mgen ld-2.23.so [.] _start We can see kernel symbols apic_timer_interrupt and page_fault. After patch applied: 99.79% mgen mgen [.] buf_read 0.19% mgen mgen [.] rand_buf_init 0.00% mgen libc-2.23.so [.] __random_r 0.00% mgen mgen [.] rand_array_init 0.00% mgen mgen [.] last_free_elem 0.00% mgen libc-2.23.so [.] vfprintf 0.00% mgen libc-2.23.so [.] rand 0.00% mgen libc-2.23.so [.] __random 0.00% mgen libc-2.23.so [.] _int_malloc 0.00% mgen libc-2.23.so [.] _IO_doallocbuf 0.00% mgen ld-2.23.so [.] do_lookup_x 0.00% mgen ld-2.23.so [.] open_verify.constprop.7 0.00% mgen ld-2.23.so [.] _dl_important_hwcaps 0.00% mgen libc-2.23.so [.] sched_setaffinity@@GLIBC_2.3.4 0.00% mgen ld-2.23.so [.] _start There are only userspace symbols. Signed-off-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Cc: kan.liang@intel.com Cc: mark.rutland@arm.com Cc: will.deacon@arm.com Cc: yao.jin@intel.com Link: http://lkml.kernel.org/r/1495706947-3744-1-git-send-email-yao.jin@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Michael Bringmann authored
commit dc421b20 upstream. When adding or removing memory, the aa_index (affinity value) for the memblock must also be converted to match the endianness of the rest of the 'ibm,dynamic-memory' property. Otherwise, subsequent retrieval of the attribute will likely lead to non-existent nodes, followed by using the default node in the code inappropriately. Fixes: 5f97b2a0 ("powerpc/pseries: Implement memory hotplug add in the kernel") Signed-off-by:
Michael Bringmann <mwb@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Ellerman authored
commit ba4a648f upstream. In commit 8c272261 ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU. Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0. This is visible in the dmesg output, as all pcpu allocs being in group 0: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47 To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31 pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39 pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47 We can also check the data_offset in the paca of various CPUs, with the fix we see: CPU 0: data_offset = 0x0ffe8b0000 CPU 24: data_offset = 0x1ffe5b0000 And we can see from dmesg that CPU 24 has an allocation on node 1: node 0: [mem 0x0000000000000000-0x0000000fffffffff] node 1: [mem 0x0000001000000000-0x0000001fffffffff] Fixes: 8c272261 ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID") Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
-
