- 15 Mar, 2016 40 commits
-
-
Nicholas Bellinger authored
commit 7f54ab5f upstream. This patch fixes a recent ABORT_TASK regression associated with commit febe562c, where a left-over target_put_sess_cmd() would still be called when __target_check_io_state() detected a command has already been completed, and explicit ABORT must be avoided. Note commit febe562c dropped the local kref_get_unless_zero() check in core_tmr_abort_task(), but did not drop this extra corresponding target_put_sess_cmd() in the failure path. So go ahead and drop this now bogus target_put_sess_cmd(), and avoid this potential use-after-free. Reported-by:
Dan Lane <dracodan@gmail.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Andy Grover <agrover@redhat.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Richard Weinberger authored
commit e4f6daac upstream. ubi_start_leb_change() allocates too few bytes. ubi_more_leb_change_data() will write up to req->upd_bytes + ubi->min_io_size bytes. Signed-off-by:
Richard Weinberger <richard@nod.at> Reviewed-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Maciej W. Rozycki authored
commit e723e3f7 upstream. Avoid sending a partially initialised `siginfo_t' structure along SIGFPE signals issued from `do_ov' and `do_trap_or_bp', leading to information leaking from the kernel stack. Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Konstantin Khlebnikov authored
commit b81de061 upstream. Overlayfs must update uid/gid after chown, otherwise functions like inode_owner_or_capable() will check user against stale uid. Catched by xfstests generic/087, it chowns file and calls utimes. Signed-off-by:
Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 45d11738 upstream. After rename file dentry still holds reference to lower dentry from previous location. This doesn't matter for data access because data comes from upper dentry. But this stale lower dentry taints dentry at new location and turns it into non-pure upper. Such file leaves visible whiteout entry after remove in directory which shouldn't have whiteouts at all. Overlayfs already tracks pureness of file location in oe->opaque. This patch just uses that for detecting actual path type. Comment from Vivek Goyal's patch: Here are the details of the problem. Do following. $ mkdir upper lower work merged upper/dir/ $ touch lower/test $ sudo mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir= work merged $ mv merged/test merged/dir/ $ rm merged/dir/test $ ls -l merged/dir/ /usr/bin/ls: cannot access merged/dir/test: No such file or directory total 0 c????????? ? ? ? ? ? test Basic problem seems to be that once a file has been unlinked, a whiteout has been left behind which was not needed and hence it becomes visible. Whiteout is visible because parent dir is of not type MERGE, hence od->is_real is set during ovl_dir_open(). And that means ovl_iterate() passes on iterate handling directly to underlying fs. Underlying fs does not know/filter whiteouts so it becomes visible to user. Why did we leave a whiteout to begin with when we should not have. ovl_do_remove() checks for OVL_TYPE_PURE_UPPER() and does not leave whiteout if file is pure upper. In this case file is not found to be pure upper hence whiteout is left. So why file was not PURE_UPPER in this case? I think because dentry is still carrying some leftover state which was valid before rename. For example, od->numlower was set to 1 as it was a lower file. After rename, this state is not valid anymore as there is no such file in lower. Signed-off-by:
Viktor Stanchev <me@viktorstanchev.com> Suggested-by:
Vivek Goyal <vgoyal@redhat.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=109611Acked-by:
-
Rui Wang authored
commit ce9113bb upstream. ovl_remove_upper() should do d_drop() only after it successfully removes the dir, otherwise a subsequent getcwd() system call will fail, breaking userspace programs. This is to fix: https://bugzilla.kernel.org/show_bug.cgi?id=110491Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Reviewed-by:
-
Konstantin Khlebnikov authored
commit b5891cfa upstream. This adds missing .d_select_inode into alternative dentry_operations. Signed-off-by:
Nikolay Borisov <kernel@kyup.com> Tested-by:
-
Simon South authored
commit 02322ac9 upstream. This patch applies the microphone-related fix created for the Acer Aspire E1-572 to the E1-472 as well, as it uses the same Realtek ALC282 CODEC and demonstrates the same issues. This patch allows an external, headset microphone to be used and limits the gain on the (quite noisy) internal microphone. Signed-off-by:
Simon South <simon@simonsouth.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Todd E Brandt authored
commit 92f9e179 upstream. Pause/unpause graph tracing around do_suspend_lowlevel as it has inconsistent call/return info after it jumps to the wakeup vector. The graph trace buffer will otherwise become misaligned and may eventually crash and hang on suspend. To reproduce the issue and test the fix: Run a function_graph trace over suspend/resume and set the graph function to suspend_devices_and_enter. This consistently hangs the system without this fix. Signed-off-by:
Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arindam Nath authored
commit 0b39c531 upstream. In amdgpu_connector_hotplug(), we need to start DP link training only after we have received DPCD. The function amdgpu_atombios_dp_get_dpcd() returns non-zero value only when an error condition is met, otherwise returns zero. So in case the function encounters an error, we need to skip rest of the code and return from amdgpu_connector_hotplug() immediately. Only when we are successfull in reading DPCD pin, we should carry on with turning-on the monitor. Signed-off-by:
Arindam Nath <arindam.nath@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 5e031d9f upstream. On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit eda1d1cf upstream. On CI, we need to see if the number of crtcs changes to determine whether or not we need to upload the mclk table again. In practice we don't currently upload the mclk table again after the initial load. The only reason you would would be to add new states, e.g., for arbitrary mclk setting which is not currently supported. Acked-by:
Jordan Lazare <Jordan.Lazare@amd.com> Acked-by:
-
Bjørn Mork authored
commit 04fdbc82 upstream. The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Timothy Pearson authored
commit 2d02b8bd upstream. During DRAM initialization on certain ASpeed devices, an incorrect bit (bit 10) was checked in the "SDRAM Bus Width Status" register to determine DRAM width. Query bit 6 instead in accordance with the Aspeed AST2050 datasheet v1.05. Signed-off-by:
Timothy Pearson <tpearson@raptorengineeringinc.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Helge Deller authored
commit 98e8b6c9 upstream. Mike Frysinger reported that his ptrace testcase showed strange behaviour on parisc: It was not possible to avoid a syscall and the return value of a syscall couldn't be changed. To modify a syscall number, we were missing to save the new syscall number to gr20 which is then picked up later in assembly again. The effect that the return value couldn't be changed is a side-effect of another bug in the assembly code. When a process is ptraced, userspace expects each syscall to report entrance and exit of a syscall. If a syscall number was given which doesn't exist, we jumped to the normal syscall exit code instead of informing userspace that the (non-existant) syscall exits. This unexpected behaviour confuses userspace and thus the bug was misinterpreted as if we can't change the return value. This patch fixes both problems and was tested on 64bit kernel with 32bit userspace. Signed-off-by:
Helge Deller <deller@gmx.de> Cc: Mike Frysinger <vapier@gentoo.org> Tested-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Takashi Iwai authored
commit 197b958c upstream. The OSS sequencer client tries to drain the pending events at releasing. Unfortunately, as spotted by syzkaller fuzzer, this may lead to an unkillable process state when the event has been queued at the far future. Since the process being released can't be signaled any longer, it remains and waits for the echo-back event in that far future. Back to history, the draining feature was implemented at the time we misinterpreted POSIX definition for blocking file operation. Actually, such a behavior is superfluous at release, and we should just release the device as is instead of keeping it up forever. This patch just removes the draining call that may block the release for too long time unexpectedly. BugLink: http://lkml.kernel.org/r/CACT4Y+Y4kD-aBGj37rf-xBw9bH3GMU6P+MYg4W1e-s-paVD2pg@mail.gmail.comReported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Wolfram Sang authored
commit 7314d22a upstream. We want the size of the struct, not of a pointer to it. To be future proof, just dereference the pointer to get the desired type. Fixes: dd1aa252 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver") Acked-by:
Gregory Fong <gregory.0xf0@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Jouni Malinen authored
commit 1ec7bae8 upstream. Public Action frames use special rules for how the BSSID field (Address 3) is set. A wildcard BSSID is used in cases where the transmitter and recipient are not members of the same BSS. As such, we need to accept Public Action frames with wildcard BSSID. Commit db8e1732 ("mac80211: ignore frames between TDLS peers when operating as AP") added a rule that drops Action frames to TDLS-peers based on an Action frame having different DA (Address 1) and BSSID (Address 3) values. This is not correct since it misses the possibility of BSSID being a wildcard BSSID in which case the Address 1 would not necessarily match. Fix this by allowing mac80211 to accept wildcard BSSID in an Action frame when in AP mode. Fixes: db8e1732 ("mac80211: ignore frames between TDLS peers when operating as AP") Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
commit 9acc54be upstream. Just like for CCMP we need to check that for GCMP the fragments have PNs that increment by one; the spec was updated to fix this security issue and now has the following text: The receiver shall discard MSDUs and MMPDUs whose constituent MPDU PN values are not incrementing in steps of 1. Adapt the code for CCMP to work for GCMP as well, luckily the relevant fields already alias each other so no code duplication is needed (just check the aliasing with BUILD_BUG_ON.) Signed-off-by:
-
Dennis Kadioglu authored
commit 17e2df46 upstream. Plantronics DA45 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x4" and "cannot get freq at ep 0x84". This patch adds the USB ID of the DA45 to quirks.c and avoids those error messages. Signed-off-by:
Dennis Kadioglu <denk@post.com> Signed-off-by:
-
Yegor Yefremov authored
commit c0992d0f upstream. Add support for Quectel UC20 and blacklist the QMI interface. Signed-off-by:
Yegor Yefremov <yegorslists@googlemail.com> [johan: amend commit message ] Signed-off-by:
-
Daniele Palmas authored
commit 5deef555 upstream. This patch adds support for 0x1045 PID of Telit LE922. Signed-off-by:
Daniele Palmas <dnlplm@gmail.com> Signed-off-by:
-
Takashi Iwai authored
commit 15c66570 upstream. The firmware ctls like "DSP1 Firmware" in wm_adsp codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
Mark Brown <broonie@kernel.org> [ kamal: backport to 4.2-stable: context ] Signed-off-by:
-
Takashi Iwai authored
commit 8019c0b3 upstream. The DRC Mode like "AIF1DRC1 Mode" and EQ Mode like "AIF1.1 EQ Mode" in wm8994 codec driver are enum ctls, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Takashi Iwai authored
commit d0784829 upstream. "MBC Mode", "VSS Mode", "VSS HPF Mode" and "Enhanced EQ Mode" ctls in wm8958 codec driver are enum, while the current driver accesses wrongly via value.integer.value[]. They have to be via value.enumerated.item[] instead. Signed-off-by:
-
Takashi Iwai authored
commit 741338f9 upstream. snd_soc_dapm_dai_link_get() and _put() access the associated ctl values as value.integer.value[]. However, this is an enum ctl, and it has to be accessed via value.enumerated.item[]. The former is long while the latter is unsigned int, so they don't align. Fixes: c6615082 ('ASoC: dapm: add code to configure dai link parameters') Signed-off-by:
-
Vittorio Alfieri authored
commit 3c4c615d upstream. The Parrot NMEA GPS Flight Recorder is a USB composite device consisting of hub, flash storage, and cp210x usb to serial chip. It is an accessory to the mass-produced Parrot AR Drone 2. The device emits standard NMEA messages which make the it compatible with NMEA compatible software. It was tested using gpsd version 3.11-3 as an NMEA interpreter and using the official Parrot Flight Recorder. Signed-off-by:
Vittorio Alfieri <vittorio88@gmail.com> Signed-off-by:
-
Patrik Halfar authored
commit 013dd239 upstream. New revision of Dell Wireless 5809e Gobi 4G HSPA+ Mobile Broadband Card has new idProduct. Bus 002 Device 006: ID 413c:81b3 Dell Computer Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x413c Dell Computer Corp. idProduct 0x81b3 bcdDevice 0.06 iManufacturer 1 Sierra Wireless, Incorporated iProduct 2 Dell Wireless 5809e Gobi
™ 4G HSPA+ Mobile Broadband Card iSerial 3 bNumConfigurations 2 Signed-off-by:Patrik Halfar <patrik_halfar@halfarit.cz> Signed-off-by:
-
Al Viro authored
commit a528aca7 upstream. Games with ordering and barriers are way too brittle. Just bump ->d_seq before and after updating ->d_inode and ->d_flags type bits, so that verifying ->d_seq would guarantee they are coherent. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Takashi Iwai authored
commit eab3c4db upstream. snd-hdsp driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Takashi Iwai authored
commit c1099c32 upstream. HDSPM driver contains a code issuing zero-division potentially in system sample rate ctl code. This patch fixes it by not processing a zero or invalid rate value as a divisor, as well as excluding the invalid value to be passed via the given ctl element. Signed-off-by:
-
Takashi Iwai authored
commit 537e4813 upstream. snd-hdspm driver accesses enum item values (int) instead of boolean values (long) wrongly for some ctl elements. This patch fixes them. Signed-off-by:
-
Michael S. Tsirkin authored
commit 887349f6 upstream. Calling return copy_to_user(...) or return copy_from_user in an ioctl will not do the right thing if there's a pagefault: copy_to_user/copy_from_user return the number of bytes not copied in this case. Fix up kvm on mips to do return copy_to_user(...)) ? -EFAULT : 0; and return copy_from_user(...)) ? -EFAULT : 0; everywhere. Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12709/Signed-off-by:
-
Michael S. Tsirkin authored
commit 4cad67fc upstream. Calling return copy_to_user(...) in an ioctl will not do the right thing if there's a pagefault: copy_to_user returns the number of bytes not copied in this case. Fix up kvm to do return copy_to_user(...)) ? -EFAULT : 0; everywhere. Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Yadan Fan authored
commit 1ee9f4bd upstream. This issue is caused by commit 02323db1 ("cifs: fix cifs_uniqueid_to_ino_t not to ever return 0"), when BITS_PER_LONG is 64 on s390x, the corresponding cifs_uniqueid_to_ino_t() function will cast 64-bit fileid to 32-bit by using (ino_t)fileid, because ino_t (typdefed __kernel_ino_t) is int type. It's defined in arch/s390/include/uapi/asm/posix_types.h #ifndef __s390x__ typedef unsigned long __kernel_ino_t; ... #else /* __s390x__ */ typedef unsigned int __kernel_ino_t; So the #ifdef condition is wrong for s390x, we can just still use one cifs_uniqueid_to_ino_t() function with comparing sizeof(ino_t) and sizeof(u64) to choose the correct execution accordingly. Signed-off-by:
Yadan Fan <ydfan@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 6cc3b242 upstream. For interim responses we only need to parse a header and update a number credits. Now it is done for all SMB2+ command except SMB2_READ which is wrong. Fix this by adding such processing. Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Tested-by:
Shirish Pargaonkar <shirishpargaonkar@gmail.com> Signed-off-by:
-
Justin Maggard authored
commit deb7deff upstream. When opening a file, SMB2_open() attempts to parse the lease state from the SMB2 CREATE Response. However, the parsing code was not careful to ensure that the create contexts are not empty or invalid, which can lead to out- of-bounds memory access. This can be seen easily by trying to read a file from a OSX 10.11 SMB3 server. Here is sample crash output: BUG: unable to handle kernel paging request at ffff8800a1a77cc6 IP: [<ffffffff8828a734>] SMB2_open+0x804/0x960 PGD 8f77067 PUD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 3 PID: 2876 Comm: cp Not tainted 4.5.0-rc3.x86_64.1+ #14 Hardware name: NETGEAR ReadyNAS 314 /ReadyNAS 314 , BIOS 4.6.5 10/11/2012 task: ffff880073cdc080 ti: ffff88005b31c000 task.ti: ffff88005b31c000 RIP: 0010:[<ffffffff8828a734>] [<ffffffff8828a734>] SMB2_open+0x804/0x960 RSP: 0018:ffff88005b31fa08 EFLAGS: 00010282 RAX: 0000000000000015 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff88007eb8c8b0 RBP: ffff88005b31fad8 R08: 666666203d206363 R09: 6131613030383866 R10: 3030383866666666 R11: 00000000000002b0 R12: ffff8800660fd800 R13: ffff8800a1a77cc2 R14: 00000000424d53fe R15: ffff88005f5a28c0 FS: 00007f7c8a2897c0(0000) GS:ffff88007eb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8800a1a77cc6 CR3: 000000005b281000 CR4: 00000000000006e0 Stack: ffff88005b31fa70 ffffffff88278789 00000000000001d3 ffff88005f5a2a80 ffffffff00000003 ffff88005d029d00 ffff88006fde05a0 0000000000000000 ffff88005b31fc78 ffff88006fde0780 ffff88005b31fb2f 0000000100000fe0 Call Trace: [<ffffffff88278789>] ? cifsConvertToUTF16+0x159/0x2d0 [<ffffffff8828cf68>] smb2_open_file+0x98/0x210 [<ffffffff8811e80c>] ? __kmalloc+0x1c/0xe0 [<ffffffff882685f4>] cifs_open+0x2a4/0x720 [<ffffffff88122cef>] do_dentry_open+0x1ff/0x310 [<ffffffff88268350>] ? cifsFileInfo_get+0x30/0x30 [<ffffffff88123d92>] vfs_open+0x52/0x60 [<ffffffff88131dd0>] path_openat+0x170/0xf70 [<ffffffff88097d48>] ? remove_wait_queue+0x48/0x50 [<ffffffff88133a29>] do_filp_open+0x79/0xd0 [<ffffffff8813f2ca>] ? __alloc_fd+0x3a/0x170 [<ffffffff881240c4>] do_sys_open+0x114/0x1e0 [<ffffffff881241a9>] SyS_open+0x19/0x20 [<ffffffff8896e257>] entry_SYSCALL_64_fastpath+0x12/0x6a Code: 4d 8d 6c 07 04 31 c0 4c 89 ee e8 47 6f e5 ff 31 c9 41 89 ce 44 89 f1 48 c7 c7 28 b1 bd 88 31 c0 49 01 cd 4c 89 ee e8 2b 6f e5 ff <45> 0f b7 75 04 48 c7 c7 31 b1 bd 88 31 c0 4d 01 ee 4c 89 f6 e8 RIP [<ffffffff8828a734>] SMB2_open+0x804/0x960 RSP <ffff88005b31fa08> CR2: ffff8800a1a77cc6 ---[ end trace d9f69ba64feee469 ]--- Signed-off-by:
Justin Maggard <jmaggard@netgear.com> Signed-off-by:
-
Takashi Iwai authored
commit b24e7ad1 upstream. X32 ABI takes the 64bit timespec, thus the timer user status ioctl becomes incompatible with IA32. This results in NOTTY error when the ioctl is issued. Meanwhile, this struct in X32 is essentially identical with the one in X86-64, so we can just bypassing to the existing code for this specific compat ioctl. Signed-off-by:
-
Takashi Iwai authored
commit 3a72494a upstream. The timer user status compat ioctl returned the bogus struct used for 64bit architectures instead of the 32bit one. This patch addresses it to return the proper struct. Signed-off-by:
-
Takashi Iwai authored
commit 2251fbbc upstream. Like the previous fixes for ctl and PCM, we need a fix for incompatible X32 ABI regarding the rawmidi: namely, struct snd_rawmidi_status has the timespec, and the size and the alignment on X32 differ from IA32. This patch fixes the incompatible ioctl for X32. Signed-off-by:
-
