- 29 Jul, 2011 2 commits
-
-
Stephen Rothwell authored
drivers/media/rc/ir-mce_kbd-decoder.c:446:16: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:446:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/rc/ir-mce_kbd-decoder.c:446:16: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:447:15: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:447:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/rc/ir-mce_kbd-decoder.c:447:15: warning: function declaration isn't a prototype drivers/media/rc/ir-mce_kbd-decoder.c:448:20: error: expected declaration specifiers or '...' before string constant drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: data definition has no type or storage class drivers/media/rc/ir-mce_kbd-decoder.c:448:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/rc/ir-mce_kbd-decoder.c:448:20: warning: function declaration isn't a prototype Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Stephen Rothwell authored
drivers/media/video/ov5642.c:985:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:985:1: warning: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/media/video/ov5642.c:985:1: warning: parameter names (without types) in function declaration drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:998:9: error: 'THIS_MODULE' undeclared (first use in this function) drivers/media/video/ov5642.c:998:9: note: each undeclared identifier is reported only once for each function it appears in drivers/media/video/ov5642.c: At top level: drivers/media/video/ov5642.c:1009:20: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1009:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1009:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/media/video/ov5642.c:1009:20: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1010:15: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1010:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1010:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/media/video/ov5642.c:1010:15: warning: function declaration isn't a prototype drivers/media/video/ov5642.c:1011:16: error: expected declaration specifiers or '...' before string constant drivers/media/video/ov5642.c:1011:1: warning: data definition has no type or storage class drivers/media/video/ov5642.c:1011:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/media/video/ov5642.c:1011:16: warning: function declaration isn't a prototype drivers/media/video/ov5642.c: In function 'ov5642_mod_init': drivers/media/video/ov5642.c:999:1: warning: control reaches end of non-void function Signed-off-by:
-
- 28 Jul, 2011 2 commits
-
-
Mauro Carvalho Chehab authored
The logic at em28xx_isoc_dvb_max_packetsize() sucks, at least for newer the needed packet size. Yet, it is better than nothing. Rewrite the code in order to change the default to 752 for em2884 and newer chips and provide a better way to handle per-chipset specifics. For em2874, the current default should be enough, as the only em2874 board is currently a 1-seg ISDB-T board, so, it needs only a limited amount of bandwidth. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the driver assumes that all QAM carriers are spaced with 8MHz. This is wrong, and may decrease QoS on Countries like Brazil, that have DVB-C carriers with 6MHz-spaced. Fortunately, both ITU-T J-83 and EN 300 429 specifies a way to associate the symbol rate with the bandwidth needed for it. For ITU-T J-83 2007 annex A, the maximum symbol rate for 6 MHz is: 6 MHz / 1.15 = 5217391 Bauds For ITU-T J-83 2007 annex C, the maximum symbol rate for 6 MHz is: 6 MHz / 1.13 = 5309735 Bauds. As this tuner is currently used only for DRX-K, and it is currently hard-coded to annex A, I've opted to use the roll-off factor of 0.15, instead of 0.13. If we ever support annex C, the better would be to add a DVB S2API call to allow changing between Annex A and C, and add the 0.13 roll-off factor to it. This code is currently being used on other frontends, so I think we should later add a core function with this code, to warrant that it will be properly implemented everywhere. Signed-off-by:
-
- 27 Jul, 2011 36 commits
-
-
Laurent Pinchart authored
Compute crop rectangle boundaries to ensure a GRBG Bayer pattern. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Michael Grzeschik authored
added new bit offset defines, more supported BE colour formats and also support BGR565 swapped pixel formats removed pixfmt helper functions and option flags setting the configuration register directly in set_pixfmt added reg_mask function reg_mask is basically the same as clearing & setting registers, but it is more convenient and faster (saves one rw cycle). Signed-off-by:
Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by:
Philipp Wiesner <p.wiesner@phytec.de> Acked-by:
Robert Jarzmik <robert.jarzmik@free.fr> [g.liakhovetski@gmx.de: remove Bayer swap, forward-port, rename macros] Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Michael Grzeschik authored
Signed-off-by:
-
Bastian Hecht authored
This is an initial driver release for the Omnivision 5642 CMOS sensor. Signed-off-by:
Bastian Hecht <hechtb@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
If vb2_dma_contig_get_userptr() fails on a videobuffer, driver's .buf_init() method will not be called and the list will not be initialised. Trying to remove an uninitialised element from a list leads to a NULL-dereference. Signed-off-by:
-
Guennadi Liakhovetski authored
Now that v4l2 subdevices have got their own device objects, having one more device in soc-camera clients became redundant and confusing. This patch removes those devices and the soc-camera bus, they used to reside on. Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Guennadi Liakhovetski authored
The soc-camera bus is now completely local again. Signed-off-by:
-
Guennadi Liakhovetski authored
This moves us one more step closer to eliminating the soc-camera bus and devices on it. Besides, as a side effect, CSI-2 runtime PM on sh-mobile secomes finer grained now: we only have to power on the interface, when the device nodes are open. Signed-off-by:
-
Guennadi Liakhovetski authored
Add media bus configuration types and two subdev operations to get supported mediabus configurations and to set a specific configuration. Subdevs can support several configurations, e.g., they can send video data on 1 or several lanes, can be configured to use a specific CSI-2 channel, in such cases subdevice drivers return bitmasks with all respective bits set. When a set-configuration operation is called, it has to specify a non-ambiguous configuration. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
soc-camera host drivers shall be implementing their PM, using standard kernel methods, soc-camera specific hooks can die. Signed-off-by:
-
Guennadi Liakhovetski authored
The pxa-camera driver doesn't need soc-camera specific PM callbacks, switch it to using the standard PM hooks instead. Signed-off-by:
-
Abylay Ospan authored
Currently available two hardware revision: 0x1 firmware filename: dvb-netup-altera-01.fw 0x4 firmware filename: dvb-netup-altera-04.fw Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
-
Abylay Ospan authored
Currently available two hardware revision: 0x1 firmware filename: dvb-netup-altera-01.fw 0x4 firmware filename: dvb-netup-altera-04.fw Signed-off-by:
-
Laurent Pinchart authored
Add two fields to the ISP parallel platform data to set the HS and VS signals polarities. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Kalle Jokiniemi authored
The RX-51 uses the CSIb IO complex for camera operation. The board file is missing definition for the regulator supplying the CSIb complex, so this is added for better power management. Signed-off-by:
Kalle Jokiniemi <kalle.jokiniemi@nokia.com> Acked-by:
-
Kalle Jokiniemi authored
The current omap3isp driver is missing regulator handling for CSIb complex in omap34xx based devices. This patch adds a mechanism for this to the omap3isp driver. Signed-off-by:
-
Amber Jain authored
Minor changes to remove the unused code from omap_vout driver. Signed-off-by:
Amber Jain <amber@ti.com> Signed-off-by:
Samreen <samreen@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by:
-
Amber Jain authored
Add support to map the buffer using dma_map_single during qbuf which inturn calls cache flush and unmap the same during dqbuf. This is done to prevent the artifacts seen because of cache-coherency issues on OMAP4 Signed-off-by:
-
Amber Jain authored
Extending the omap vout isr handling for: - HDMI interface. These are the new interfaces added to OMAP4 DSS. Signed-off-by:
-
archit taneja authored
Introduce omap_vout_vrfb.c and omap_vout_vrfb.h, for all VRFB related API's, making OMAP_VOUT driver independent from VRFB. This is required for OMAP4 DSS, since OMAP4 doesn't have VRFB block. Added new enum vout_rotation_type and "rotation_type" member to omapvideo_info, this is initialized based on the arch type in omap_vout_probe. The rotation_type var is now used to choose between vrfb and non-vrfb calls. Signed-off-by:
Archit Taneja <archit@ti.com> Signed-off-by:
-
archit taneja authored
Rename rotation_enabled() and rotate_90_or_270() to is_rotation_enabled() and is_rotation_90_or_270() to make them more descriptive. Signed-off-by:
-
archit taneja authored
Move the inline functions rotate_90_or_270(), rotation_enabled(), and calc_rotation() from omap_vout.c to omap_voutdef.h. Move the independent functions omap_vout_alloc_buffer() and omap_vout_free_buffer() to omap_voutlib.c. Remove extern identifier from function definitions in omap_voutlib.h Add static identifier to functions that are used locally in omap_vout.c Signed-off-by:
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap24xxcam as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
-
Amber Jain authored
Remove GFP_DMA from the __get_free_pages() call from omap_vout as ZONE_DMA is not configured on OMAP. Earlier the page allocator used to return a page from ZONE_NORMAL even when GFP_DMA is passed and CONFIG_ZONE_DMA is disabled. As a result of commit a197b59a, page allocator returns null in such a scenario with a warning emitted to kernel log. Signed-off-by:
-
Kirill Smelkov authored
The camera there identifies itself as being manufactured by Cheng Uei Precision Industry Co., Ltd (Foxlink), and product is titled as "HP Webcam [2 MP Fixed]". I was trying to get 2 USB video capture devices to work simultaneously, and noticed that the above mentioned webcam always requires packet size = 3072 bytes per micro frame (~= 23.4 MB/s isoc bandwidth), which is far more than enough to get standard NTSC 640x480x2x30 = ~17.6 MB/s isoc bandwidth. As there are alt interfaces with smaller MxPS T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=05c8 ProdID=0403 Rev= 1.06 S: Manufacturer=Foxlink S: Product=HP Webcam [2 MP Fixed] S: SerialNumber=200909240102 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=uvcvideo E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 512 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1536 Ivl=125us I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2688 Ivl=125us I: If#= 1 Alt= 7 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us UVC_QUIRK_FIX_BANDWIDTH helps here and NTSC video can be served with MxPS=2688 i.e. 20.5 MB/s isoc bandwidth. In terms of microframe time allocation, before the quirk NTSC video required 60 usecs / microframe and 53 usecs / microframe after. Acked-by:Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by:
-
Devin Heitmueller authored
The signal state field in G_TUNER is typically scaled from 0-100%. Since we don't know the signal level, we really would prefer the field to contain 100% than 1/256, which in many utilities (such as v4l2-ctl) rounds to 0% even when a signal is actually present. This patch makes the behavior consistent with other drivers. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
Make use of the signal state registers to properly populate the signal lock registers in the cx231xx driver. This allows applications to know whether there is a signal present even in devices which lack a tuner (since such apps typically won't call G_TUNER if no tuner is present). [mchehab@redhat.com: Fix CodingStyle: don't use {} for one-line if's] Signed-off-by: -
Devin Heitmueller authored
On platforms that have CONFIG_HZ set to 100, the power ramp time effectively ends up being 10ms. However, on those that have a higher CONFIG_HZ, the time ends up *actually* being 5ms, which doesn't allow enough time for the hardware to be fully powered up before attempting to address it via i2c. Change the constant to 10ms, which is long enough for the hardware to power up, and won't really be anymore time than it was previously on platforms with CONFIG_HZ being 100. Credit goes to Mauro Carvalho Chehab and Gerd Hoffmann who previously investigated this issue. Tested with the Hauppauge USBLive 2, with which the problem was readily reproducible after setting CONFIG_HZ to 1000. Signed-off-by:
-
Devin Heitmueller authored
The following patch addresses the regression introduced in the cx231xx driver which stopped the Hauppauge USBLive2 from working. Confirmed working by both myself and the user who reported the issue on the KernelLabs blog (Robert DeLuca). At some point during refactoring of the cx231xx driver, the USBLive 2 device became broken. This patch results in the device working again. Thanks to Robert DeLuca for sponsoring this work. Signed-off-by:
-
Stephan Lachowsky authored
The search for matching extension units fails to take account of the current chain. In the case where you have two distinct video chains, both containing an XU with the same GUID but different unit ids, you will be unable to perform a mapping on the second chain because entity on the first chain will always be found first Fix this by only searching the current chain when performing a control mapping. This is analogous to the search used by uvc_find_control(), and is the correct behaviour. Signed-off-by:
Stephan Lachowsky <stephan.lachowsky@maxim-ic.com> Acked-by:
-
Sergei Shtylyov authored
The driver reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by:Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Fix the DRX-K logic that selects between DVB-C annex A and C Fix a typo where DVB-C annex type is set via setEnvParameters, but the driver, uses, instead, setParamParameters[2]. While here, cleans up the code, fixing a bad identation at the fallback code for other types of firmware, and put the multiple-line comments into the Linux CodingStyle. Acked-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by:
-
