- 22 Aug, 2017 32 commits
-
-
Veerasenareddy Burru authored
Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Veerasenareddy Burru authored
The macro LIO_CMD_WAIT_TM is not specific to the PF driver; it can be used by the VF driver too, so move its definition from a PF-specific header file to one that's common to PF and VF. Signed-off-by: Veerasenareddy Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
Make these const as they are only used in a copy operation. Done using Coccinelle. @match disable optional_qualifier@ identifier s; @@ static struct ptp_clock_info s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct ptp_clock_info s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Salil authored
This patch adds the following support to the HNS3 driver: 1. Support to change the Maximum Transmission Unit of a port in the HNS NIC hardware. 2. Initializes the supported MTU range for the netdevice. Signed-off-by: lipeng <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Aviad Krawczyk says: ==================== Huawei HiNIC Ethernet Driver The patch-set contains the support of the HiNIC Ethernet driver for hinic family of PCIE Network Interface Cards. The Huawei's PCIE HiNIC card is a new Ethernet card and hence there was a need of a new driver. The current driver is meant to be used for the Physical Function and there would soon be a support for Virtual Function and more features once the basic PF driver has been accepted. Changes V7 -> V8: 1. Remove unnecessary cast from void * - Stephen Hemminger comment https://lkml.org/lkml/2017/8/17/1008 Changes V6 -> V7: 1. Separate netpoll and MAINTAINERS patch - Sergei Shtylyov comment https://lkml.org/lkml/2017/8/17/479 Changes V5 -> V6: 1. Fix cover letter Message-Id Changes V4 -> V5: 1. Remove select_queue NOP - David Miller comment https://lkml.org/lkml/2017/8/16/625 Changes V3 -> V4: 1. Reverse christmas tree order - David Miller comment https://lkml.org/lkml/2017/8/3/862 Changes V2 -> V3: 1. Replace dev_ functions by netif_ functions - Joe Perches comment https://lkml.org/lkml/2017/7/19/424 2. Fix the driver directory in MAINTAINERS file - Sergei Shtylyov comment https://lkml.org/lkml/2017/7/19/615 3. Add a newline at the end of Makefile - David Miller comment https://lkml.org/lkml/2017/7/19/1345 4. Return a pointer as a val instead of in arg - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 5. Change the error labels to err_xyz - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 6. Remove check of Func Type in free function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 7. Remove !netdev check in remove function - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 8. Use module_pci_driver - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 9. Move the PCI device ID to the .c file - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 10. Remove void * to avoid passing wrong ptr - Francois Romieu comment https://lkml.org/lkml/2017/7/19/1319 Changes V1 -> V2: 1. remove driver verstion - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 2. replace kzalloc by devm_kzalloc for short clean - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/372 3. replace pr_ functions by dev_ functions - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/375 4. seperate last patch by moving ops to a new patch - Andrew Lunn comment https://lkml.org/lkml/2017/7/12/377 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Update MAINTAINERS file Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add more netdev operation - netpoll. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add ethtool operations and statistics operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add transmit operation for sending data by qp operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Set the io resources in the nic and handle rx events by qp operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add cmdq completion handler for getting a notification about the completion of cmdq commands. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add cmdq commands for setting queue pair contexts in the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Initialize the completion event queues and handle ceq events by calling the registered handlers. Used for cmdq command completion. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Create the work queues for cmdq and update the nic about the work queue contexts. cmdq commands are used for updating the nic about the qp contexts. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Update the nic about the resources of the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Create the resources for queue pair operations: doorbell area, consumer index address and producer index address. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Create work queues for being used by the queue pairs. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Create the logical queues of the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add port management message for setting Rx mode in the card, used for rx_mode netdev operation. The link event handler is used for getting a notification about the link state. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add the port management commands that are sent as management messages. The port management commands are used for netdev operations. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Handle aeq elements that are accumulated on the aeq by calling the registered handler for the specific event. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add the api cmd commands for sending management messages to the nic. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Add the management messages for sending to api cmd and the asynchronous event handler for the completion of the messages. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Update the hardware about api cmd resources and initialize it. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Initialize api cmd resources as part of management initialization. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Initialize hw device by calling the initialization functions of aeqs and management channel. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Aviad Krawczyk authored
Initialize hw interface as part of the nic initialization for accessing hw. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Wu authored
It only supports rmii interface. Add constants and callback functions for the dwmac on rv1108 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
The get_options() function takes the whole ARRAY_SIZE(). It doesn't matter here because we don't use more than 7 elements. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shubham Bansal authored
The JIT compiler emits ARM 32 bit instructions. Currently, It supports eBPF only. Classic BPF is supported because of the conversion by BPF core. This patch is essentially changing the current implementation of JIT compiler of Berkeley Packet Filter from classic to internal with almost all instructions from eBPF ISA supported except the following BPF_ALU64 | BPF_DIV | BPF_K BPF_ALU64 | BPF_DIV | BPF_X BPF_ALU64 | BPF_MOD | BPF_K BPF_ALU64 | BPF_MOD | BPF_X BPF_STX | BPF_XADD | BPF_W BPF_STX | BPF_XADD | BPF_DW Implementation is using scratch space to emulate 64 bit eBPF ISA on 32 bit ARM because of deficiency of general purpose registers on ARM. Currently, only LITTLE ENDIAN machines are supported in this eBPF JIT Compiler. Tested on ARMv7 with QEMU by me (Shubham Bansal). Testing results on ARMv7: 1) test_bpf: Summary: 341 PASSED, 0 FAILED, [312/333 JIT'ed] 2) test_tag: OK (40945 tests) 3) test_progs: Summary: 30 PASSED, 0 FAILED 4) test_lpm: OK 5) test_lru_map: OK Above tests are all done with following flags enabled discreatly. 1) bpf_jit_enable=1 a) CONFIG_FRAME_POINTER enabled b) CONFIG_FRAME_POINTER disabled 2) bpf_jit_enable=1 and bpf_jit_harden=2 a) CONFIG_FRAME_POINTER enabled b) CONFIG_FRAME_POINTER disabled See Documentation/networking/filter.txt for more information. Signed-off-by: Shubham Bansal <illusionist.neo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
- 21 Aug, 2017 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: "Just a couple small fixes, two of which have to do with gcc-7: 1) Don't clobber kernel fixed registers in __multi4 libgcc helper. 2) Fix a new uninitialized variable warning on sparc32 with gcc-7, from Thomas Petazzoni. 3) Adjust pmd_t initializer on sparc32 to make gcc happy. 4) If ATU isn't available, don't bark in the logs. From Tushar Dave" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: kernel/pcic: silence gcc 7.x warning in pcibios_fixup_bus() sparc64: remove unnecessary log message sparc64: Don't clibber fixed registers in __multi4. mm: add pmd_t initializer __pmd() to work around a GCC bug.
-
Thomas Petazzoni authored
When building the kernel for Sparc using gcc 7.x, the build fails with: arch/sparc/kernel/pcic.c: In function ‘pcibios_fixup_bus’: arch/sparc/kernel/pcic.c:647:8: error: ‘cmd’ may be used uninitialized in this function [-Werror=maybe-uninitialized] cmd |= PCI_COMMAND_IO; ^~ The simplified code looks like this: unsigned int cmd; [...] pcic_read_config(dev->bus, dev->devfn, PCI_COMMAND, 2, &cmd); [...] cmd |= PCI_COMMAND_IO; I.e, the code assumes that pcic_read_config() will always initialize cmd. But it's not the case. Looking at pcic_read_config(), if bus->number is != 0 or if the size is not one of 1, 2 or 4, *val will not be initialized. As a simple fix, we initialize cmd to zero at the beginning of pcibios_fixup_bus. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gao Feng authored
Add the invalid handle "0" check to avoid unnecessary search, because the qdisc uses the skb->priority as the handle value to look up, and it is "0" usually. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Paul Maloy authored
When the broadcast send link after 100 attempts has failed to transfer a packet to all peers, we consider it stale, and reset it. Thereafter it needs to re-synchronize with the peers, something currently done by just resetting and re-establishing all links to all peers. This has turned out to be overkill, with potentially unwanted consequences for the remaining cluster. A closer analysis reveals that this can be done much simpler. When this kind of failure happens, for reasons that may lie outside the TIPC protocol, it is typically only one peer which is failing to receive and acknowledge packets. It is hence sufficient to identify and reset the links only to that peer to resolve the situation, without having to reset the broadcast link at all. This solution entails a much lower risk of negative consequences for the own node as well as for the overall cluster. We implement this change in this commit. Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - PAE40 related updates - SLC errata for region ops - intc line masking by default * tag 'arc-4.13-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: arc: Mask individual IRQ lines during core INTC init ARCv2: PAE40: set MSB even if !CONFIG_ARC_HAS_PAE40 but PAE exists in SoC ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses ARC: dma: implement dma_unmap_page and sg variant ARCv2: SLC: Make sure busy bit is set properly for region ops ARC: [plat-sim] Include this platform unconditionally ARC: [plat-axs10x]: prepare dts files for enabling PAE40 on axs103 ARC: defconfig: Cleanup from old Kconfig options
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC fix from Alexandre Belloni: "Fix regmap configuration for ds1307" * tag 'rtc-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: fix regmap config
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix IGMP handling wrt VRF, from David Ahern. 2) Fix timer access to freed object in dccp, from Eric Dumazet. 3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are triggerable by userspace. Also from Eric Dumazet. 4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian King. 5) Correct datagram peek handling of empty SKBs, from Matthew Dawson. 6) Fix use after free in TIPC, from Eric Dumazet. 7) When replacing a route in ipv6 we need to reset the round robin pointer, from Wei Wang. 8) Fix bug in pci_find_pcie_root_port() which was unearthed by the relaxed ordering changes, from Thierry Redding. I made sure to get an explicit ACK from Bjorn this time around :-) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) ipv6: repair fib6 tree in failure case net_sched: fix order of queue length updates in qdisc_replace() tools lib bpf: improve warning switchdev: documentation: minor typo fixes bpf, doc: also add s390x as arch to sysctl description net: sched: fix NULL pointer dereference when action calls some targets rxrpc: Fix oops when discarding a preallocated service call irda: do not leak initialized list.dev to userspace net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled PCI: Allow PCI express root ports to find themselves tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set ipv6: reset fn->rr_ptr when replacing route sctp: fully initialize the IPv6 address in sctp_v6_to_addr() tipc: fix use-after-free tun: handle register_netdevice() failures properly datagram: When peeking datagrams with offset < 0 don't skip empty skbs bpf, doc: improve sysctl knob description netxen: fix incorrect loop counter decrement nfp: fix infinite loop on umapping cleanup ...
-
Oleg Nesterov authored
This was reported many times, and this was even mentioned in commit 52ee2dfd ("pids: refactor vnr/nr_ns helpers to make them safe") but somehow nobody bothered to fix the obvious problem: task_tgid_nr_ns() is not safe because task->group_leader points to nowhere after the exiting task passes exit_notify(), rcu_read_lock() can not help. We really need to change __unhash_process() to nullify group_leader, parent, and real_parent, but this needs some cleanups. Until then we can turn task_tgid_nr_ns() into another user of __task_pid_nr_ns() and fix the problem. Reported-by: Troy Kensinger <tkensinger@google.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-