klist_iter_exit() only takes one parameter.
Also fix warning by adding additional brackets.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>

Retry internal operation after unit check instead of aborting them.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Add timeout handler for common-I/O-layer-internal I/O operations.
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Use page_to_phys and pfn_to_page to avoid open-coded mem_map usage.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Size zones and holes in an architecture independent manner for s390.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

The include of linux/smp.h needs to be done before the #if that
checks for the compiler version. Seems like fallout from the
inline assembly cleanup patch vs. the directed yield patch.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

Fix a race condition during AP device registration and unregistration.
Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

While the machine owns us an interrupt in these cases (and we should get
one), reality isn't always like that...
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Fix new restore_sigregs function. It copies the user space copy of the
old psw without correcting the psw.mask and the psw.addr high order bit.
While we are at it, simplify save_sigregs a bit.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

* 'for-2.6.19' of git://brick.kernel.dk/data/git/linux-2.6-block:
  [PATCH] Document bi_sector and sector_t
  [PATCH] helper function for retrieving scsi_cmd given host based block layer tag

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Remove remaining reference to ite_gpio.h from Kbuild
  [MIPS] PNX8550 fixups

Signed-Off-By: Roger Gammans <rgammans@computer-surgery.co.uk>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

This was necessitated by the need for a function to get back
to a scsi_cmnd, when an hba the posts its (corresponding) completion
interrupt with a block layer tag as its reference.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

* master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4712): Fix warning when compiling on x86_i64
  V4L/DVB (4711): Radio: No need to return void
  V4L/DVB (4708): Add tveeprom support for Philips FM1236/FM1216ME MK5
  V4L/DVB (4707): 4linux: complete conversion to hotplug safe PCI API
  V4L/DVB (4706): Do not enable VIDEO_V4L2 unconditionally
  V4L/DVB (4704): SAA713x: fixed compile warning in SECAM fixup
  V4L/DVB (4703): Add support for the ASUS EUROPA2 OEM board
  V4L/DVB (4702): Fix: set antenna input for DVB-T for Asus P7131 Dual hybrid
  V4L/DVB (4701): Saa713x audio fixes
  V4L/DVB (4676a): Remove Kconfig item for DiB7000M support

The atmel_console_get_options() function initializes the baud,
parity and bits settings from the actual hardware setup, in
case it has been initialized by a e.g. boot loader.

The baud rate, however, is not necessarily exactly equal to one of
the standard baud rates (115200, etc.) This means that the baud rate
calculated by this function may be slightly higher or slightly lower
than one of the standard baud rates.

If the baud rate is slightly lower than the target, this causes
problems when uart_set_option() tries to match the detected baud rate
against the standard baud rate, as it will always select a baud rate
that is lower or equal to the target rate. For example if the
detected baud rate is slightly lower than 115200, usart_set_options()
will select 57600.

This patch fixes the problem by subtracting 1 from the value in BRGR
when calculating the baud rate. The detected baud rate will thus
always be higher than the nearest standard baud rate, and
uart_set_options() will end up doing the right thing.

Tested on ATSTK1000 and AT91RM9200-EK boards. Both are broken without
this patch.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Allow the board to remap actual USART peripheral devices to serial
devices by calling at32_map_usart(hw_id, serial_line). This ensures
that even though ATSTK1002 uses USART1 as the first serial port, it
will still have a ttyS0 device.

This also adds a board-specific early setup hook and moves the
at32_setup_serial_console() call there from the platform code.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Make CONFIG_SERIAL_ATMEL selectable on AVR32 and #ifdef out some ARM-
specific code in the driver.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

In order to initialize the serial console early, the atmel_serial
driver had to do a hack where it compared the physical address of the
port with an address known to be permanently mapped, and used it as a
virtual address. This got around the limitation that ioremap() isn't
always available when the console is being initalized.

This patch removes that hack and replaces it with a new "regs" field
in struct atmel_uart_data that the board-specific code can initialize
to a fixed virtual mapping for platform devices where this is possible.
It also initializes the DBGU's regs field with the address the driver
used to check against.

On AVR32, the "regs" field is initialized from the physical base
address when this it can be accessed through a permanently 1:1 mapped
segment, i.e. the P4 segment.

If regs is NULL, the console initialization is delayed until the "real"
driver is up and running and ioremap() can be used.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename at91_register_uart_fns and associated structs and variables
to make it consistent with the atmel_ prefix used by the rest of
the driver.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The at91_serial driver can be used with both AT32 and AT91 devices
from Atmel and has therefore been renamed atmel_serial. The only
thing left is to rename PORT_AT91 PORT_ATMEL.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Prefix all internal functions and variables with atmel_ instead of
at91_.

The at91_register_uart_fns() stuff is left as is since I can't find
any actual users of it.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename the following public definitions:
  * AT91_NR_UART -> ATMEL_MAX_UART
  * struct at91_uart_data -> struct atmel_uart_data
  * at91_default_console_device -> atmel_default_console_device
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename the "at91_usart" platform driver "atmel_usart" and update
platform devices accordingly.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename the following Kconfig symbols:
  * CONFIG_SERIAL_AT91 -> CONFIG_SERIAL_ATMEL
  * CONFIG_SERIAL_AT91_CONSOLE -> CONFIG_SERIAL_ATMEL_CONSOLE
  * CONFIG_SERIAL_AT91_TTYAT -> CONFIG_SERIAL_ATMEL_TTYAT
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Rename at91_serial.c atmel_serial.c
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename
it atmel_usart.h. Also delete AVR32's version of this file.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch fixes the compilation errors on PNX8550 and hard-to-track
bug in interrupt handling.
It also corresponds to the latest changes in PNX8550 serial driver.
Signed-off-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/configh:
  Remove all inclusions of <linux/config.h>

Manually resolved trivial path conflicts due to removed files in
the sound/oss/ subdirectory.

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6: (292 commits)
  [GFS2] Fix endian bug for de_type
  [GFS2] Initialize SELinux extended attributes at inode creation time.
  [GFS2] Move logging code into log.c (mostly)
  [GFS2] Mark nlink cleared so VFS sees it happen
  [GFS2] Two redundant casts removed
  [GFS2] Remove uneeded endian conversion
  [GFS2] Remove duplicate sb reading code
  [GFS2] Mark metadata reads for blktrace
  [GFS2] Remove iflags.h, use FS_
  [GFS2] Fix code style/indent in ops_file.c
  [GFS2] streamline-generic_file_-interfaces-and-filemap gfs fix
  [GFS2] Remove readv/writev methods and use aio_read/aio_write instead (gfs bits)
  [GFS2] inode-diet: Eliminate i_blksize from the inode structure
  [GFS2] inode_diet: Replace inode.u.generic_ip with inode.i_private (gfs)
  [GFS2] Fix typo in last patch
  [GFS2] Fix direct i/o logic in filemap.c
  [GFS2] Fix bug in Makefiles for lock modules
  [GFS2] Remove (extra) fs_subsys declaration
  [GFS2/DLM] Fix trailing whitespace
  [GFS2] Tidy up meta_io code
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [XFRM]: BEET mode
  [TCP]: Kill warning in tcp_clean_rtx_queue().
  [NET_SCHED]: Remove old estimator implementation
  [ATM]: [zatm] always *pcr in alloc_shaper()
  [ATM]: [ambassador] Change the return type to reflect reality
  [ATM]: kmalloc to kzalloc patches for drivers/atm
  [TIPC]: fix printk warning
  [XFRM]: Clearing xfrm_policy_count[] to zero during flush is incorrect.
  [XFRM] STATE: Use destination address for src hash.
  [NEIGH]: always use hash_mask under tbl lock
  [UDP]: Fix MSG_PROBE crash
  [UDP6]: Fix flowi clobbering
  [NET_SCHED]: Revert "HTB: fix incorrect use of RB_EMPTY_NODE"
  [NETFILTER]: ebt_mark: add or/and/xor action support to mark target
  [NETFILTER]: ipt_REJECT: remove largely duplicate route_reverse function
  [NETFILTER]: Honour source routing for LVS-NAT
  [NETFILTER]: add type parameter to ip_route_me_harder
  [NETFILTER]: Kconfig: fix xt_physdev dependencies

* master.kernel.org:/pub/scm/linux/kernel/git/willy/parisc-2.6: (41 commits)
  [PARISC] Kill wall_jiffies use
  [PARISC] Honour "panic_on_oops" sysctl
  [PARISC] Fix fs/binfmt_som.c
  [PARISC] Export clear_user_page to modules
  [PARISC] Make DMA routines more stubby
  [PARISC] Define pci_get_legacy_ide_irq
  [PARISC] Fix CONFIG_DEBUG_SPINLOCK
  [PARISC] Fix HPUX compat compile with current GCC
  [PARISC] Fix iounmap compile warning
  [PARISC] Add support for Quicksilver AGPGART
  [PARISC] Move LBA and SBA register defines to the common ropes.h
  [PARISC] Create shared <asm/ropes.h> header
  [PARISC] Stash the lba_device in its struct device drvdata
  [PARISC] Generalize IS_ASTRO et al to take a parisc_device like
  [PARISC] Pretty print the name of the lba type on kernel boot
  [PARISC] Remove some obsolete comments and I checked that Reo is similar to Ike
  [PARISC] Add hardware found in the rp8400
  [PARISC] Allow nested interrupts
  [PARISC] Further updates to timer_interrupt()
  [PARISC] remove halftick and copy clocktick to local var (gcc can optimize usage)
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (25 commits)
  [POWERPC] Add support for the mpc832x mds board
  [POWERPC] Add initial support for the e300c2 core
  [POWERPC] Add MPC8360EMDS default dts file
  [POWERPC] Add MPC8360EMDS board support
  [POWERPC] Add QUICC Engine (QE) infrastructure
  [POWERPC] Add QE device tree node definition
  [POWERPC] Don't try to just continue if xmon has no input device
  [POWERPC] Fix a printk in pseries_mpic_init_IRQ
  [POWERPC] Get default baud rate in udbg_scc
  [POWERPC] Fix zImage.coff on oldworld PowerMac
  [POWERPC] Fix xmon=off and cleanup xmon initialisation
  [POWERPC] Cleanup include/asm-powerpc/xmon.h
  [POWERPC] Update swim3 printk after blkdev.h change
  [POWERPC] Cell interrupt rework
  POWERPC: mpc82xx merge: board-specific/platform stuff(resend)
  POWERPC: 8272ads merge to powerpc: common stuff
  POWERPC: Added devicetree for mpc8272ads board
  [POWERPC] iSeries has no legacy I/O
  [POWERPC] implement BEGIN/END_FW_FTR_SECTION
  [POWERPC] iSeries does not need pcibios_fixup_resources
  ...

* 'audit.b32' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] message types updated
  [PATCH] name_count array overrun
  [PATCH] PPID filtering fix
  [PATCH] arch filter lists with < or > should not be accepted

This fixes support for rev c8 of the ALi/ULi PATA, and keeps pcmcia in
sync so ide_cs and pata_pcmcia are interchangable, both are only changes
to constants.

Right now rev 0xC8 and higher don't work with libata but 0xc8 is in the
field now.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix obvious build breakage revealed by 'make allyesconfig'
in current -git.
Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  [libata] pata_artop: kill gcc warning
  [PATCH] libata: turn off NCQ if queue depth is adjusted to 1
  [PATCH] libata: cosmetic changes to constants
  [libata] DocBook minor updates, fixes
  [libata] PCI ID table cleanup in various drivers
  [libata] Print out Status register, if a BSY-sleep takes too long
  [libata] init probe_ent->private_data in a common location
  [libata] minor PCI IDE probe fixes and cleanups
  [libata] Use new PCI_VDEVICE() macro to dramatically shorten ID lists
  [PATCH] Fix reference of uninitialised memory in ata_device_add()