Unfortunately, advertising P2P_DEVICE support was a little
premature, a number of issues came up in testing and have
been fixed for 3.10. Rather than try to backport all the
different fixes, disable P2P_DEVICE support in the drivers
using it. For iwlmvm that implies disabling P2P completely
as it can't support P2P operation w/o P2P Device.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Copy & paste mistake - STATION_INFO_TX_BYTES64 is the name of the flag,
not NL80211_STA_INFO_TX_BYTES64.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The code I added in "mac80211: don't start new netdev queues
if driver stopped" crashes for monitor and AP VLAN interfaces
because while they have a netdev, they don't have queues set
up by the driver.

To fix the crash, exclude these from queue accounting here
and just start their netdev queues unconditionally.

For monitor, this is the best we can do, as we can redirect
frames there to any other interface and don't know which one
that will since it can be different for each frame.

For AP VLAN interfaces, we can do better later and actually
properly track the queue status. Not doing this is really a
separate bug though.
Reported-by: Ilan Peer <ilan.peer@intel.com>
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If a P2P-Device is present and another virtual interface triggers
the connection work, the system crash because it tries to check
if the P2P-Device's netdev (which doesn't exist) is up. Skip any
wdevs that have no netdev to fix this.

Cc: stable@vger.kernel.org
Reported-by: YanBo <dreamfly281@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We send direct probe to broadcast address, as some APs do not respond to
unicast PROBE frames when unassociated. Broadcast frames are not acked,
so we can not use that for trigger MLME state machine, but we need to
use old timeout mechanism.

This fixes authentication timed out like below:

[ 1024.671974] wlan6: authenticate with 54:e6:fc:98:63:fe
[ 1024.694125] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3)
[ 1024.695450] wlan6: direct probe to 54:e6:fc:98:63:fe (try 2/3)
[ 1024.700586] wlan6: send auth to 54:e6:fc:98:63:fe (try 3/3)
[ 1024.701441] wlan6: authentication with 54:e6:fc:98:63:fe timed out

With fix, we have:

[ 4524.198978] wlan6: authenticate with 54:e6:fc:98:63:fe
[ 4524.220692] wlan6: direct probe to 54:e6:fc:98:63:fe (try 1/3)
[ 4524.421784] wlan6: send auth to 54:e6:fc:98:63:fe (try 2/3)
[ 4524.423272] wlan6: authenticated
[ 4524.423811] wlan6: associate with 54:e6:fc:98:63:fe (try 1/3)
[ 4524.427492] wlan6: RX AssocResp from 54:e6:fc:98:63:fe (capab=0x431 status=0 aid=1)

Cc: stable@vger.kernel.org # 3.9
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The code sending the current WoWLAN TCP wakeup settings in
nl80211_send_wowlan_tcp() is not closing the nested attribute,
thus causing the parser to get confused on the receiver side
in userspace (iw). Fix this.

Cc: stable@vger.kernel.org [3.9]
Reported-by: Deepak Arora <deepakx.arora@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Even if the frame isn't transmitted to the AP, we need to
report it to cfg80211 so the state there can be updated
correctly.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When the interface goes down, there's no need to call
cfg80211_mlme_down() after __cfg80211_disconnect() as
the latter will call the former (if appropriate.)

Also, in __cfg80211_disconnect(), if the cfg80211 SME
isn't used, __cfg80211_disconnected() may still need
to be called (depending on the current state) so that
the SME state gets cleared.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In AP mode, ignore frames with mis-matched BSSID that aren't
multicast or sent to the correct destination. This fixes
reporting public action frames to userspace multiple times
on multiple virtual AP interfaces.

Cc: stable@vger.kernel.org
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Adding the attributes fixes an issue with P2P Device not
working properly for management frame TX.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_get_tkip_p2k() may be called with interrupts
disabled, so spin_unlock_bh() isn't safe and leads to
warnings. Since it's always called with BHs disabled
already, just use spin_lock().

Cc: stable@vger.kernel.org
Reported-by: Milan Kocian <milon@wq.cz>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Document rx vs tx status concurrency requirements.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When an HT AP is advertising channel switch in a beacon, it
doesn't (and shouldn't, according to 802.11-2012 Table 8-20)
include a secondary channel offset element. The only possible
interpretation is that the previous secondary channel offset
remains valid, so use that when switching channel based only
on beacon information.

VHT requires the Wide Bandwidth Channel Switch subelement to
be present in the Channel Switch Wrapper element, so the code
for that is probably ok (see 802.11ac Draft 4, 8.4.2.165.)
Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Since commit 12e7f517,
IEEE80211_SDATA_DISCONNECT_RESUME no longer worked as
it would simply never be tested. Restore a bit of the
code removed there and in 9b7d72c1
to make it work again.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If the device reports a non-wireless wakeup reason, the
tracing code crashes trying to dereference a NULL pointer.
Fix this by checking the pointer on all accesses and also
add a non_wireless tag to the event.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Not registering a platform_driver would make us access garbage
when the platform callbacks under driver_register() kicks in.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Tested-By: Martin Pitt <martin.pitt@ubuntu.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

If rfkill_register() fails in wiphy_register() the struct device
is unregistered but everything else isn't (regulatory, debugfs)
and we even leave the wiphy instance on all internal lists even
though it will likely be freed soon, which is clearly a problem.
Fix this by cleaning up properly.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

John W. Linville says:

====================
Here is a batch of fixes intended for the 3.10 stream.

Amitkumar Karwar provides an mwifiex fix to plug a memory leak when
the driver is unloaded.

Bing Zhao brings an mwifiex fix for some flag handling that leads to
log spam and an unusable interface.

Daniel Drake offers an mwifiex fix for multicast filter setup, to
correctly implement wakeup behaviour for multicast WOL.

Felix Fietkau fixes an ath9k problem that produces logspam and keycache
errors due to a bad return code.

Stanislaw Gruszka produces an fix for a WARNING from ath5k, and an
iwl4965 workaround to stop advertising a feature that doesn't work with
the current mac80211 implementation.

Sujith Manoharan gives us an ath9k fix to reprogram the HW beacon timers
after a TSF update, and an initvals fix for the AR9565 device.

Thommy Jakobsson fixes an rx descriptor underrun on b43.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

Pull trivial pstore update from Tony Luck:
 "Couple of pstore cleanups"

It turns out that the kmemdup() conversion ends up being undone by the
fact that the memory block also needed the ecc information (see commit
bd08ec33: "pstore/ram: Restore ecc information block"), so all that
remains after merging is the error return code change.

* tag 'please-pull-pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore/ram: fix error return code in ramoops_probe()
  fs: pstore: Replaced calls to kmalloc and memcpy with kmemdup

Pull NVMe driver update from Matthew Wilcox:
 "Lots of exciting new features in the NVM Express driver this time,
  including support for emulating SCSI commands, discard support and the
  ability to submit per-sector metadata with I/Os.

  It's still mostly bugfixes though!"

* git://git.infradead.org/users/willy/linux-nvme: (27 commits)
  NVMe: Use user defined admin ioctl timeout
  NVMe: Simplify Firmware Activate code slightly
  NVMe: Only clear the enable bit when disabling controller
  NVMe: Wait for device to acknowledge shutdown
  NVMe: Schedule timeout for sync commands
  NVMe: Meta-data support in NVME_IOCTL_SUBMIT_IO
  NVMe: Device specific stripe size handling
  NVMe: Split non-mergeable bio requests
  NVMe: Remove dead code in nvme_dev_add
  NVMe: Check for NULL memory in nvme_dev_add
  NVMe: Fix error clean-up on nvme_alloc_queue
  NVMe: Free admin queue on request_irq error
  NVMe: Add scsi unmap to SG_IO
  NVMe: queue usage fixes in nvme-scsi
  NVMe: Set TASK_INTERRUPTIBLE before processing queues
  NVMe: Add a character device for each nvme device
  NVMe: Fix endian-related problems in user I/O submission path
  NVMe: Fix I/O cancellation status on big-endian machines
  NVMe: Fix sparse warnings in scsi emulation
  NVMe: Don't fail initialisation unnecessarily
  ...

Pull ACPICA fixes from Rafael Wysocki:

 - _INI regression fix from Tomasz Nowicki.

 - Fix for a possible memory leak in _OSI support routine from Jung-uk
   Kim.

 - Fix for a possible buffer overflow during field unit read operation
   from Bob Moore.

* tag 'acpi-fixes-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: ACPICA: Fix for _INI regression
  ACPICA: _OSI support: Fix possible memory leak
  ACPICA: Fix possible buffer overflow during a field unit read operation

Pull ARM SoC fixes and straggler patches from Olof Johansson:
 "A collection of fixes for fall out from 3.10 merge window, some build
  fixes and warning cleanups and a small handful of patches that were
  small and contained and made sense to still include in 3.10 (some of
  these have also been in -next since the merge window opened).

  Largest continous series is for OMAP, but there's a handful for other
  platforms.

  For i.MX, one of the patches are framebuffer fixups due to fallout
  during the merge window, and the other removes some stale and broken
  code."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (34 commits)
  ARM: exynos: dts: Fixed vbus-gpios
  ARM: EXYNOS5: Fix kernel dump in AFTR idle mode
  ARM: ux500: Rid ignored return value of regulator_enable() compiler warning
  ARM: ux500: read the correct soc_id number
  ARM: exynos: dts: cros5250: add cyapa trackpad
  video: mxsfb: Adapt to new videomode API
  ARM: imx: Select GENERIC_ALLOCATOR
  ARM: imx: compile fix for hotplug.c
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ...

Pull xtensa updates from Chris Zankel:
 "Support for the latest MMU architecture that allows for a larger
  accessible memory region, and various bug-fixes"

* tag 'xtensa-next-20130508' of git://github.com/czankel/xtensa-linux:
  xtensa: Switch to asm-generic/linkage.h
  xtensa: fix redboot load address
  xtensa: ISS: fix timer_lock usage in rs_open
  xtensa: disable IRQs while IRQ handler is running
  xtensa: enable lockdep support
  xtensa: fix arch_irqs_disabled_flags implementation
  xtensa: add irq flags trace support
  xtensa: provide custom CALLER_ADDR* implementations
  xtensa: add stacktrace support
  xtensa: clean up stpill_registers
  xtensa: don't use a7 in simcalls
  xtensa: don't attempt to use unconfigured timers
  xtensa: provide default platform_pcibios_init implementation
  xtensa: remove KCORE_ELF again
  xtensa: document MMUv3 setup sequence
  xtensa: add MMU v3 support
  xtensa: fix ibreakenable register update
  xtensa: fix oprofile building as module

Pull ARC port updates from Vineet Gupta:
 "Support for two new platforms based on ARC700:
   - Abilis TB10x SoC [Chritisian/Pierrick]
   - Simulator only System-C Model [Mischa]

  ARC specific MM improvements:
   - Avoid full TLB flush (ASID increment) on munmap (even single page)
   - VIPT Cache Flushing improvements
     + Delayed dcache flush for non-aliasing dcache (big performance boost)
     + icache flush aliasing agnostic (no need to kill all possible aliases)

  Others:
   - Avoid needless rebuild of DTB files for every kernel build
   - Remove builtin cmdline as that is already provided by DeviceTree/bootargs
   - Fixing unaligned access emulation corner case
   - checkpatch fixes [Sachin]
   - Various fixlets [Noam]
   - Minor build failures/cleanups"

* tag 'arc-v3.10-rc1-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (35 commits)
  ARC: [mm] Lazy D-cache flush (non aliasing VIPT)
  ARC: [mm] micro-optimize page size icache invalidate
  ARC: [mm] remove the pessimistic all-alias-invalidate icache helpers
  ARC: [mm] consolidate icache/dcache sync code
  ARC: [mm] optimise icache flush for kernel mappings
  ARC: [mm] optimise icache flush for user mappings
  ARC: [mm] optimize needless full mm TLB flush on munmap
  ARC: Add support for nSIM OSCI System C model
  ARC: [TB10x] Adapt device tree to new compatible string
  ARC: [TB10x] Add support for TB10x platform
  ARC: [TB10x] Device tree of TB100 and TB101 Development Kits
  ARC: Prepare interrupt code for external controllers
  ARC: Allow embedded arc-intc to be properly placed in DT intc hierarchy
  ARC: [cmdline] Don't overwrite u-boot provided bootargs
  ARC: [cmdline] Remove CONFIG_CMDLINE
  ARC: [plat-arcfpga] defconfig update
  ARC: unaligned access emulation broken if callee-reg dest of LD/ST
  ARC: unaligned access emulation error handling consolidation
  ARC: Debug/crash-printing Improvements
  ARC: fix typo with clock speed
  ...

Pull tile update from Chris Metcalf:
 "The interesting bug fix is support for the upcoming "4.2" release of
  the Tilera hypervisor, which by default launches Linux at privilege
  level 2 instead of 1.  The fix lets new and old hypervisors and
  Linuxes interoperate more smoothly, so I've tagged it for
  stable@kernel.org so that older Linuxes will be able to boot under the
  newer hypervisor."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  usb: tilegx: fix memleak when create hcd fail
  arch/tile: remove inline marking of EXPORT_SYMBOL functions
  rtc: rtc-tile: add missing platform_device_unregister() when module exit
  tile: support new Tilera hypervisor

Dave reported an oops triggered by trinity:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: newseg+0x10d/0x390
  PGD cf8c1067 PUD cf8c2067 PMD 0
  Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
  CPU: 2 PID: 7636 Comm: trinity-child2 Not tainted 3.9.0+#67
  ...
  Call Trace:
    ipcget+0x182/0x380
    SyS_shmget+0x5a/0x60
    tracesys+0xdd/0xe2

This bug was introduced by commit af73e4d9 ("hugetlbfs: fix mmap
failure in unaligned size request").
Reported-by: Dave Jones <davej@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Li Zefan <lizfan@huawei.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semctl GETNCNT returns the number of semops waiting for the
specified semaphore to become nonzero.  After commit 9f1bc2c9
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The semctl GETZCNT returns the number of semops waiting for the
specified semaphore to become zero.  After commit 9f1bc2c9
("ipc,sem: have only one list in struct sem_queue"), the semops waiting
on just one semaphore are waiting on that semaphore's list.

In order to return the correct count, we have to walk that list too, in
addition to the sem_array's list for complex operations.

This bug broke dbench; it works again with this patch applied.
Signed-off-by: Rik van Riel <riel@redhat.com>
Reported-by: Kent Overstreet <koverstreet@google.com>
Tested-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more vfs fixes from Al Viro:
 "Regression fix from Geert + yet another open-coded kernel_read()"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ecryptfs: don't open-code kernel_read()
  xtensa simdisk: Fix proc_create_data() conversion fallout

The 'samsung,vbus-gpio' was submitted before pinmux landed for
exynos5250 and uses the old-style gpio specifier.  Fix the two
exynos5250 boards that use it.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The kernel crashes while resuming from AFTR idle mode. It happens
because L2 cache was not going into retention state.

This patch configures the USE_RETENTION bit of ARM_L2_OPTION register
so that it does not depend on MANUAL_L2RSTDISABLE_CONTROL of
ARM_COMMON_OPTION register for L2RSTDISABLE signal.
Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Tested-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap device tree fixes for issue discovered during the merge window:

- Fix triggering for GPIO interrupts that's needed for 4430sdp
  Ethernet. Otherwise booting with nfsroot won't work.
- Fix CPU operating point values
- Fix wrong assumption that twl PMIC is always connected to omap3
- Add gpmc for am33xx so beaglebone users can use the bus
- Cosmetic fix for mcspi pin muxing to avoid confusion

* tag 'omap-for-v3.10/dt-fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: don't assume boards are using twl4030 for omap3
  ARM: dts: Configure and fix the McSPI pins for 4430sdp
  ARM: dts: AM33XX: Add GPMC node
  ARM: dts: OMAP4460: Fix CPU OPP voltages
  ARM: dts: OMAP36xx: Fix CPU OPP voltages
  ARM: dts: OMAP4: Fix ethernet IRQ for OMAP4 boards

Merge tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
Omap fixes for things that were discovered during the merge window:

- Few GPMC fixes and binding doc updates noted after sending
  pull requests for the GPMC branch.
- Board fixes for beagle usb host and rx51 spi probe order
- SoC fixes dt earlyprintk, omap1 dma and omap2+ id.c error
  handling fixes

Then few minor things that are not strictly fixes but are good
to get out of the way:

- Add missing legacy mux registers for am/dm73x gpio
- Add detection for am33xx pg2.1 silicon
- Enable twl4030 audio modules in defconfig

* tag 'omap-for-v3.10/fixes-for-merge-window-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Remove bogus IS_ERR_OR_NULL checking from id.c
  ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module
  ARM: OMAP2: AM33XX: id: Add support for new AM335x PG2.1 Si
  omap: mux: add AM/DM37x gpios
  ARM: OMAP1: DMA: fix error handling in omap1_system_dma_init()
  ARM: OMAP2+: omap_device: use late_initcall_sync
  ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
  ARM: OMAP3: Beagle: Fix USB Host on beagle xM Ax/Bx
  ARM: OMAP2+: only WARN if a GPMC child probe function fail
  ARM: OMAP2+: only search for GPMC DT child nodes on probe
  Documentation: dt: update properties in TI GPMC NAND example
  Documentation: dt: update TI GPMC ethernet binding properties
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/mach-ux500/board-mop500.c: In function ‘mop500_prox_activate’:
arch/arm/mach-ux500/board-mop500.c:406:18: warning: ignoring return value of
        ‘regulator_enable’, declared with attribute warn_unused_result
        [-Wunused-result]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix db8500_read_soc_id() to read all five soc_id number locations
instead of repeating the second one two times.
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Pull btrfs update from Chris Mason:
 "These are mostly fixes.  The biggest exceptions are Josef's skinny
  extents and Jan Schmidt's code to rebuild our quota indexes if they
  get out of sync (or you enable quotas on an existing filesystem).

  The skinny extents are off by default because they are a new variation
  on the extent allocation tree format.  btrfstune -x enables them, and
  the new format makes the extent allocation tree about 30% smaller.

  I rebased this a few days ago to rework Dave Sterba's crc checks on
  the super block, but almost all of these go back to rc6, since I
  though 3.9 was due any minute.

  The biggest missing fix is the tracepoint bug that was hit late in
  3.9.  I ran into problems with that in overnight testing and I'm still
  tracking it down.  I'll definitely have that fixed for rc2."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (101 commits)
  Btrfs: allow superblock mismatch from older mkfs
  btrfs: enhance superblock checks
  btrfs: fix misleading variable name for flags
  btrfs: use unsigned long type for extent state bits
  Btrfs: improve the loop of scrub_stripe
  btrfs: read entire device info under lock
  btrfs: remove unused gfp mask parameter from release_extent_buffer callchain
  btrfs: handle errors returned from get_tree_block_key
  btrfs: make static code static & remove dead code
  Btrfs: deal with errors in write_dev_supers
  Btrfs: remove almost all of the BUG()'s from tree-log.c
  Btrfs: deal with free space cache errors while replaying log
  Btrfs: automatic rescan after "quota enable" command
  Btrfs: rescan for qgroups
  Btrfs: split btrfs_qgroup_account_ref into four functions
  Btrfs: allocate new chunks if the space is not enough for global rsv
  Btrfs: separate sequence numbers for delayed ref tracking and tree mod log
  btrfs: move leak debug code to functions
  Btrfs: return free space in cow error path
  Btrfs: set UUID in root_item for created trees
  ...

Trivial patch, adding the i2c Cypress trackpad used on Snow.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>

Pull xfs update (#2) from Ben Myers:

 - add CONFIG_XFS_WARN, a step between zero debugging and
   CONFIG_XFS_DEBUG.

 - fix attrmulti and attrlist to fall back to vmalloc when kmalloc
   fails.

* tag 'for-linus-v3.10-rc1-2' of git://oss.sgi.com/xfs/xfs:
  xfs: fallback to vmalloc for large buffers in xfs_compat_attrlist_by_handle
  xfs: fallback to vmalloc for large buffers in xfs_attrlist_by_handle
  xfs: introduce CONFIG_XFS_WARN

commit 6cd2c7db (videomode: videomode_from_timing work) changed the name of
the function from videomode_from_timing() to videomode_from_timings().

commit 32ed6ef1 (videomode: create enum for videomode's display flags) changed
the 'data_flags' field in videomode structure to 'flags'

Adapt to these changes in order to fix the following errors:

drivers/video/mxsfb.c:761:3: error: too many arguments to function 'videomode_from_timing'
drivers/video/mxsfb.c:761:7: error: void value not ignored as it ought to be
drivers/video/mxsfb.c:768:9: error: 'struct videomode' has no member named 'data_flags'
drivers/video/mxsfb.c:770:9: error: 'struct videomode' has no member named 'data_flags'

Also, select VIDEOMODE_HELPER instead of OF_VIDEOMODE, as this one is
deprecated.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>