[ Upstream commit bd975d1e ]

The secmech hmac(md5) structures are present in the TCP_Server_Info
struct and can be shared among multiple CIFS sessions.  However, the
server mutex is not currently held when these structures are allocated
and used, which can lead to a kernel crashes, as in the scenario below:

mount.cifs(8) #1				mount.cifs(8) #2

Is secmech.sdeschmaccmd5 allocated?
// false

						Is secmech.sdeschmaccmd5 allocated?
						// false

secmech.hmacmd = crypto_alloc_shash..
secmech.sdeschmaccmd5 = kzalloc..
sdeschmaccmd5->shash.tfm = &secmec.hmacmd;

						secmech.sdeschmaccmd5 = kzalloc
						// sdeschmaccmd5->shash.tfm
						// not yet assigned

crypto_shash_update()
 deref NULL sdeschmaccmd5->shash.tfm

 Unable to handle kernel paging request at virtual address 00000030
 epc   : 8027ba34 crypto_shash_update+0x38/0x158
 ra    : 8020f2e8 setup_ntlmv2_rsp+0x4bc/0xa84
 Call Trace:
  crypto_shash_update+0x38/0x158
  setup_ntlmv2_rsp+0x4bc/0xa84
  build_ntlmssp_auth_blob+0xbc/0x34c
  sess_auth_rawntlmssp_authenticate+0xac/0x248
  CIFS_SessSetup+0xf0/0x178
  cifs_setup_session+0x4c/0x84
  cifs_get_smb_ses+0x2c8/0x314
  cifs_mount+0x38c/0x76c
  cifs_do_mount+0x98/0x440
  mount_fs+0x20/0xc0
  vfs_kern_mount+0x58/0x138
  do_mount+0x1e8/0xccc
  SyS_mount+0x88/0xd4
  syscall_common+0x30/0x54

Fix this by locking the srv_mutex around the code which uses these
hmac(md5) structures.  All the other secmech algos already have similar
locking.

Fixes: 95dc8dd1 ("Limit allocation of crypto mechanisms to dialect which requires")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 064cdd2d ]

This patch fixes a race in iscsit_release_commands_from_conn() ->
iscsit_free_cmd() -> transport_generic_free_cmd() + wait_for_tasks=1,
where CMD_T_FABRIC_STOP could end up being set after the final
kref_put() is called from core_tmr_abort_task() context.

This results in transport_generic_free_cmd() blocking indefinately
on se_cmd->cmd_wait_comp, because the target_release_cmd_kref()
check for CMD_T_FABRIC_STOP returns false.

To address this bug, make iscsit_release_commands_from_conn()
do list_splice and set CMD_T_FABRIC_STOP early while holding
iscsi_conn->cmd_lock.  Also make iscsit_aborted_task() only
remove iscsi_cmd_t if CMD_T_FABRIC_STOP has not already been
set.

Finally in target_release_cmd_kref(), only honor fabric_stop
if CMD_T_ABORTED has been set.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # 3.14+
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5e2c956b ]

During transport_generic_free_cmd() with a concurrent TMR
ABORT_TASK and shutdown CMD_T_FABRIC_STOP bit set, the
caller will be blocked on se_cmd->cmd_wait_stop completion
until the final kref_put() -> target_release_cmd_kref()
has been invoked to call complete().

However, when ABORT_TASK is completed with FUNCTION_COMPLETE
in core_tmr_abort_task(), the aborted se_cmd will have already
been removed from se_sess->sess_cmd_list via list_del_init().

This results in target_release_cmd_kref() hitting the
legacy list_empty() == true check, invoking ->release_cmd()
but skipping complete() to wakeup se_cmd->cmd_wait_stop
blocked earlier in transport_generic_free_cmd() code.

To address this bug, it's safe to go ahead and drop the
original list_empty() check so that fabric_stop invokes
the complete() as expected, since list_del_init() can
safely be used on a empty list.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Quinn Tran <quinn.tran@qlogic.com>
Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org # 3.14+
Tested-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 144f4c98 ]

nand_do_write_ops() determines if it is writing a partial page with the
formula:
	part_pagewr = (column || writelen < (mtd->writesize - 1))

When 'writelen' is exactly 1 byte less than the NAND page size the formula
equates to zero, so the code doesn't process it as a partial write,
although it should.
As a consequence the function remains in the while(1) loop with 'writelen'
becoming 0xffffffff and iterating endlessly.

The bug may not be easy to reproduce in Linux since user space tools
usually force the padding or round-up the write size to a page-size
multiple.
This was discovered in U-Boot where the issue can be reproduced by
writing any size that is 1 byte less than a page-size multiple.
For example, on a NAND with 2K page (0x800):
	=> nand erase.part <partition>
	=> nand write $loadaddr <partition> 7ff

[Editor's note: the bug was added in commit 29072b96, but moved
around in commit 66507c7b ("mtd: nand: Add support to use nand_base
poi databuf as bounce buffer")]

Fixes: 29072b96 ("[MTD] NAND: add subpage write support")
Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 2ce39ad1 ]

Clearing PSTATE.D is one of the requirements for generating a debug
exception. The arm64 booting protocol requires that PSTATE.D is set,
since many of the debug registers (for example, the hw_breakpoint
registers) are UNKNOWN out of reset and could potentially generate
spurious, fatal debug exceptions in early boot code if PSTATE.D was
clear. Once the debug registers have been safely initialised, PSTATE.D
is cleared, however this is currently broken for two reasons:

(1) The boot CPU clears PSTATE.D in a postcore_initcall and secondary
    CPUs clear PSTATE.D in secondary_start_kernel. Since the initcall
    runs after SMP (and the scheduler) have been initialised, there is
    no guarantee that it is actually running on the boot CPU. In this
    case, the boot CPU is left with PSTATE.D set and is not capable of
    generating debug exceptions.

(2) In a preemptible kernel, we may explicitly schedule on the IRQ
    return path to EL1. If an IRQ occurs with PSTATE.D set in the idle
    thread, then we may schedule the kthread_init thread, run the
    postcore_initcall to clear PSTATE.D and then context switch back
    to the idle thread before returning from the IRQ. The exception
    return path will then restore PSTATE.D from the stack, and set it
    again.

This patch fixes the problem by moving the clearing of PSTATE.D earlier
to proc.S. This has the desirable effect of clearing it in one place for
all CPUs, long before we have to worry about the scheduler or any
exception handling. We ensure that the previous reset of MDSCR_EL1 has
completed before unmasking the exception, so that any spurious
exceptions resulting from UNKNOWN debug registers are not generated.

Without this patch applied, the kprobes selftests have been seen to fail
under KVM, where we end up attempting to step the OOL instruction buffer
with PSTATE.D set and therefore fail to complete the step.

Cc: <stable@vger.kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 5f070e81 ]

When there is more data to be processed, the current test in
scatterwalk_done may prevent us from calling pagedone even when
we should.

In particular, if we're on an SG entry spanning multiple pages
where the last page is not a full page, we will incorrectly skip
calling pagedone on the second last page.

This patch fixes this by adding a separate test for whether we've
reached the end of a page.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 23bc6ab0 ]

When we retrieve imtu value from userspace we should use 16 bit pointer
cast instead of 32 as it's defined that way in headers. Fixes setsockopt
calls on big-endian platforms.
Signed-off-by: Amadeusz Sławiński <amadeusz.slawinski@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 3c0415fa ]

This patch adds support for 0x1206 PID of Telit LE910.

Since the interfaces positions are the same than the ones for
0x1043 PID of Telit LE922, telit_le922_blacklist_usbcfg3 is used.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6bcb8014 ]

At the start of __tm_recheckpoint() we save the kernel stack pointer
(r1) in SPRG SCRATCH0 (SPRG2) so that we can restore it after the
trecheckpoint.

Unfortunately, the same SPRG is used in the SLB miss handler.  If an
SLB miss is taken between the save and restore of r1 to the SPRG, the
SPRG is changed and hence r1 is also corrupted.  We can end up with
the following crash when we start using r1 again after the restore
from the SPRG:

  Oops: Bad kernel stack pointer, sig: 6 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  CPU: 658 PID: 143777 Comm: htm_demo Tainted: G            EL   X 4.4.13-0-default #1
  task: c0000b56993a7810 ti: c00000000cfec000 task.ti: c0000b56993bc000
  NIP: c00000000004f188 LR: 00000000100040b8 CTR: 0000000010002570
  REGS: c00000000cfefd40 TRAP: 0300   Tainted: G            EL   X  (4.4.13-0-default)
  MSR: 8000000300001033 <SF,ME,IR,DR,RI,LE>  CR: 02000424  XER: 20000000
  CFAR: c000000000008468 DAR: 00003ffd84e66880 DSISR: 40000000 SOFTE: 0
  PACATMSCRATCH: 00003ffbc865e680
  GPR00: fffffffcfabc4268 00003ffd84e667a0 00000000100d8c38 000000030544bb80
  GPR04: 0000000000000002 00000000100cf200 0000000000000449 00000000100cf100
  GPR08: 000000000000c350 0000000000002569 0000000000002569 00000000100d6c30
  GPR12: 00000000100d6c28 c00000000e6a6b00 00003ffd84660000 0000000000000000
  GPR16: 0000000000000003 0000000000000449 0000000010002570 0000010009684f20
  GPR20: 0000000000800000 00003ffd84e5f110 00003ffd84e5f7a0 00000000100d0f40
  GPR24: 0000000000000000 0000000000000000 0000000000000000 00003ffff0673f50
  GPR28: 00003ffd84e5e960 00000000003d0f00 00003ffd84e667a0 00003ffd84e5e680
  NIP [c00000000004f188] restore_gprs+0x110/0x17c
  LR [00000000100040b8] 0x100040b8
  Call Trace:
  Instruction dump:
  f8a1fff0 e8e700a8 38a00000 7ca10164 e8a1fff8 e821fff0 7c0007dd 7c421378
  7db142a6 7c3242a6 38800002 7c810164 <e9c100e0> e9e100e8 ea0100f0 ea2100f8

We hit this on large memory machines (> 2TB) but it can also be hit on
smaller machines when 1TB segments are disabled.

To hit this, you also need to be virtualised to ensure SLBs are
periodically removed by the hypervisor.

This patches moves the saving of r1 to the SPRG to the region where we
are guaranteed not to take any further SLB misses.

Fixes: 98ae22e1 ("powerpc: Add helper functions for transactional memory context switching")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Neuling <mikey@neuling.org>
Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 190ce869 ]

Currently we have 2 segments that are bolted for the kernel linear
mapping (ie 0xc000... addresses). This is 0 to 1TB and also the kernel
stacks. Anything accessed outside of these regions may need to be
faulted in. (In practice machines with TM always have 1T segments)

If a machine has < 2TB of memory we never fault on the kernel linear
mapping as these two segments cover all physical memory. If a machine
has > 2TB of memory, there may be structures outside of these two
segments that need to be faulted in. This faulting can occur when
running as a guest as the hypervisor may remove any SLB that's not
bolted.

When we treclaim and trecheckpoint we have a window where we need to
run with the userspace GPRs. This means that we no longer have a valid
stack pointer in r1. For this window we therefore clear MSR RI to
indicate that any exceptions taken at this point won't be able to be
handled. This means that we can't take segment misses in this RI=0
window.

In this RI=0 region, we currently access the thread_struct for the
process being context switched to or from. This thread_struct access
may cause a segment fault since it's not guaranteed to be covered by
the two bolted segment entries described above.

We've seen this with a crash when running as a guest with > 2TB of
memory on PowerVM:

  Unrecoverable exception 4100 at c00000000004f138
  Oops: Unrecoverable exception, sig: 6 [#1]
  SMP NR_CPUS=2048 NUMA pSeries
  CPU: 1280 PID: 7755 Comm: kworker/1280:1 Tainted: G                 X 4.4.13-46-default #1
  task: c000189001df4210 ti: c000189001d5c000 task.ti: c000189001d5c000
  NIP: c00000000004f138 LR: 0000000010003a24 CTR: 0000000010001b20
  REGS: c000189001d5f730 TRAP: 4100   Tainted: G                 X  (4.4.13-46-default)
  MSR: 8000000100001031 <SF,ME,IR,DR,LE>  CR: 24000048  XER: 00000000
  CFAR: c00000000004ed18 SOFTE: 0
  GPR00: ffffffffc58d7b60 c000189001d5f9b0 00000000100d7d00 000000003a738288
  GPR04: 0000000000002781 0000000000000006 0000000000000000 c0000d1f4d889620
  GPR08: 000000000000c350 00000000000008ab 00000000000008ab 00000000100d7af0
  GPR12: 00000000100d7ae8 00003ffe787e67a0 0000000000000000 0000000000000211
  GPR16: 0000000010001b20 0000000000000000 0000000000800000 00003ffe787df110
  GPR20: 0000000000000001 00000000100d1e10 0000000000000000 00003ffe787df050
  GPR24: 0000000000000003 0000000000010000 0000000000000000 00003fffe79e2e30
  GPR28: 00003fffe79e2e68 00000000003d0f00 00003ffe787e67a0 00003ffe787de680
  NIP [c00000000004f138] restore_gprs+0xd0/0x16c
  LR [0000000010003a24] 0x10003a24
  Call Trace:
  [c000189001d5f9b0] [c000189001d5f9f0] 0xc000189001d5f9f0 (unreliable)
  [c000189001d5fb90] [c00000000001583c] tm_recheckpoint+0x6c/0xa0
  [c000189001d5fbd0] [c000000000015c40] __switch_to+0x2c0/0x350
  [c000189001d5fc30] [c0000000007e647c] __schedule+0x32c/0x9c0
  [c000189001d5fcb0] [c0000000007e6b58] schedule+0x48/0xc0
  [c000189001d5fce0] [c0000000000deabc] worker_thread+0x22c/0x5b0
  [c000189001d5fd80] [c0000000000e7000] kthread+0x110/0x130
  [c000189001d5fe30] [c000000000009538] ret_from_kernel_thread+0x5c/0xa4
  Instruction dump:
  7cb103a6 7cc0e3a6 7ca222a6 78a58402 38c00800 7cc62838 08860000 7cc000a6
  38a00006 78c60022 7cc62838 0b060000 <e8c701a0> 7ccff120 e8270078 e8a70098
  ---[ end trace 602126d0a1dedd54 ]---

This fixes this by copying the required data from the thread_struct to
the stack before we clear MSR RI. Then once we clear RI, we only access
the stack, guaranteeing there's no segment miss.

We also tighten the region over which we set RI=0 on the treclaim()
path. This may have a slight performance impact since we're adding an
mtmsr instruction.

Fixes: 090b9284 ("powerpc/tm: Clear MSR RI in non-recoverable TM code")
Signed-off-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit c65d5c6c ]

If we encounter a filesystem error during orphan cleanup, we should stop.
Otherwise, we may end up in an infinite loop where the same inode is
processed again and again.

    EXT4-fs (loop0): warning: checktime reached, running e2fsck is recommended
    EXT4-fs error (device loop0): ext4_mb_generate_buddy:758: group 2, block bitmap and bg descriptor inconsistent: 6117 vs 0 free clusters
    Aborting journal on device loop0-8.
    EXT4-fs (loop0): Remounting filesystem read-only
    EXT4-fs error (device loop0) in ext4_free_blocks:4895: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs error (device loop0) in ext4_ext_remove_space:3068: IO failure
    EXT4-fs error (device loop0) in ext4_ext_truncate:4667: Journal has aborted
    EXT4-fs error (device loop0) in ext4_orphan_del:2927: Journal has aborted
    EXT4-fs error (device loop0) in ext4_do_update_inode:4893: Journal has aborted
    EXT4-fs (loop0): Inode 16 (00000000618192a0): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819748): orphan list check failed!
    [...]
    EXT4-fs (loop0): Inode 16 (0000000061819bf0): orphan list check failed!
    [...]

See-also: c9eb13a9 ("ext4: fix hang when processing corrupted orphaned inode list")
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d3200be6 ]

Same interface as other UNIPHY blocks
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 2f1fe811 ]

When freeing the nested resources of a vcpu, there is an assumption that
the vcpu's vmcs01 is the current VMCS on the CPU that executes
nested_release_vmcs12(). If this assumption is violated, the vcpu's
vmcs01 may be made active on multiple CPUs at the same time, in
violation of Intel's specification. Moreover, since the vcpu's vmcs01 is
not VMCLEARed on every CPU on which it is active, it can linger in a
CPU's VMCS cache after it has been freed and potentially
repurposed. Subsequent eviction from the CPU's VMCS cache on a capacity
miss can result in memory corruption.

It is not sufficient for vmx_free_vcpu() to call vmx_load_vmcs01(). If
the vcpu in question was last loaded on a different CPU, it must be
migrated to the current CPU before calling vmx_load_vmcs01().
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 25b1f9ac ]

BugLink: http://bugs.launchpad.net/bugs/1498667

As reported in BugLink, this device has an issue with Linux Power
Management so adding a quirk.  This quirk was reccomended by Alan Stern:

http://lkml.iu.edu/hypermail/linux/kernel/1606.2/05590.htmlSigned-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit df36c5be ]

Like other buggy models that had their fixes [1], the touchscreen with
id 04f3:21b8 from ELAN Microelectronics needs the device-qualifier
quirk. Otherwise, it fails to respond, blocks the boot for a random
amount of time and pollutes dmesg with:

[ 2887.373196] usb 1-5: new full-speed USB device number 41 using xhci_hcd
[ 2889.502000] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 2889.502005] usb 1-5: can't read configurations, error -71
[ 2889.654571] usb 1-5: new full-speed USB device number 42 using xhci_hcd
[ 2891.783438] usb 1-5: unable to read config index 0 descriptor/start: -71
[ 2891.783443] usb 1-5: can't read configurations, error -71

[1]: See commits c68929f7, 876af5d4, d7499475, a32c99e7 and dc703ec2.
Tested-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Adrien Vergé <adrienverge@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit f0454029 ]

__tlb_flush_asce() should never be used if multiple asce belong to a mm.

As this function changes mm logic determining if local or global tlb
flushes will be neded, we might end up flushing only the gmap asce on all
CPUs and a follow up mm asce flushes will only flush on the local CPU,
although that asce ran on multiple CPUs.

The missing tlb flushes will provoke strange faults in user space and even
low address protections in user space, crashing the kernel.

Fixes: 1b948d6c ("s390/mm,tlb: optimize TLB flushing for zEC12")
Cc: stable@vger.kernel.org # 3.15+
Reported-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 8d9535b6 ]

When opening a file with O_CREAT flag, check to see if the file opened
is an existing directory.

This prevents the directory from being opened which subsequently causes
a crash when the close function for directories cifs_closedir() is called
which frees up the file->private_data memory while the file is still
listed on the open file list for the tcon.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 2a00932f ]

When disconnecting the usbtv device, the sound card is unregistered
from ALSA and the snd member of the usbtv struct is set to NULL.  If
the usbtv snd_trigger work is running, this can cause a race condition
where the kernel will attempt to access free'd resources, shown in
[1].

This patch fixes the disconnection code by cancelling any snd_trigger
work before unregistering the sound card from ALSA and checking that
the snd member still exists in the work function.

[1]:
 usb 3-1.2: USB disconnect, device number 6
 BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
 IP: [<ffffffff81093850>] process_one_work+0x30/0x480
 PGD 405bbf067 PUD 405bbe067 PMD 0
 Call Trace:
  [<ffffffff81093ce8>] worker_thread+0x48/0x4e0
  [<ffffffff81093ca0>] ? process_one_work+0x480/0x480
  [<ffffffff81093ca0>] ? process_one_work+0x480/0x480
  [<ffffffff81099998>] kthread+0xd8/0xf0
  [<ffffffff815c73c2>] ret_from_fork+0x22/0x40
  [<ffffffff810998c0>] ? kthread_worker_fn+0x170/0x170
 ---[ end trace 0f3dac5c1a38e610 ]---
Signed-off-by: Matthew Leach <matthew@mattleach.net>
Tested-by: Peter Sutton <foxxy@foxdogstudios.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 12d86896 ]

T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=05 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3490 Rev=00.01
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

BugLink: https://bugs.launchpad.net/bugs/1600623Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 72f9f8b5 ]

Add hw id to ath3k usb device list and btusb blacklist

T:  Bus=01 Lev=01 Prnt=01 Port=08 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3487 Rev=00.02
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb

Requires these firmwares:
ar3k/AthrBT_0x11020100.dfu and ar3k/ramps_0x11020100_40.dfu
Firmwares are available in linux-firmware.

Device found in a laptop ASUS model N552VW. It's an Atheros AR9462 chip.
Signed-off-by: Lauro Costa <lauro@polilinux.com.br>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit bbdb34c9 ]

Fix RC5 decoding with Fintek CIR chipset

Commit e87b540b tightened up the RC5
decoding by adding a check for trailing silence to ensure a valid RC5
command had been received. Unfortunately the trailer length checked was
10 units and the Fintek CIR device does not want to provide details of a
space longer than 6350us. This meant that RC5 remotes working on a
Fintek setup on 3.16 failed on 3.17 and later. Fix this by shortening
the trailer check to 6 units (allowing for a previous space in the
received remote command).

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=117221Signed-off-by: Jonathan McDowell <noodles@earth.li>
Cc: stable@vger.kernel.org
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit ca6e6126 ]

Implement memory barriers according to Documentation/circular-buffers.txt:
- use smp_store_release() to update ringbuffer read/write pointers
- use smp_load_acquire() to load write pointer on reader side
- use ACCESS_ONCE() to load read pointer on writer side

This fixes data stream corruptions observed e.g. on an ARM Cortex-A9
quad core system with different types (PCI, USB) of DVB tuners.
Signed-off-by: Soeren Moch <smoch@web.de>
Cc: stable@vger.kernel.org # 3.14+
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 14ff8d48 ]

DRM_CONNECTOR_POLL_CONNECT only enables polling for connections, not
disconnections. Because of this, we end up losing hotplug polling for
analog connectors once they get connected.

Easy way to reproduce:
 - Grab a machine with a radeon GPU and a VGA port
 - Plug a monitor into the VGA port, wait for it to update the connector
   from disconnected to connected
 - Disconnect the monitor on VGA, a hotplug event is never sent for the
   removal of the connector.

Originally, only using DRM_CONNECTOR_POLL_CONNECT might have been a good
idea since doing VGA polling can sometimes result in having to mess with
the DAC voltages to figure out whether or not there's actually something
there since VGA doesn't have HPD. Doing this would have the potential of
showing visible artifacts on the screen every time we ran a poll while a
VGA display was connected. Luckily, radeon_vga_detect() only resorts to
this sort of polling if the poll is forced, and DRM's polling helper
doesn't force it's polls.

Additionally, this removes some assignments to connector->polled that
weren't actually doing anything.

Cc: stable@vger.kernel.org
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d814b24f ]

ATPX dGPU power control requires a 200ms delay between
power off and on.  This should fix dGPU failures on
resume from power off.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e1d8c1feecf672379c50ab045fd94548468bc987 ]

[ Upstream commit 5b9554dc ]

If s_reserved_gdt_blocks is extremely large, it's possible for
ext4_init_block_bitmap(), which is called when ext4 sets up an
uninitialized block bitmap, to corrupt random kernel memory.  Add the
same checks which e2fsck has --- it must never be larger than
blocksize / sizeof(__u32) --- and then add a backup check in
ext4_init_block_bitmap() in case the superblock gets modified after
the file system is mounted.
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit fc51b632 ]

It seems that recent kernels have a shorter timeout when scanning for
ethernet phys causing us to hit a timeout on boards where the phy's
regulator gets enabled just before scanning, which leads to non working
ethernet.

A 10ms startup delay seems to be enough to fix it, this commit adds a
20ms startup delay just to be safe.

This has been tested on a sun4i-a10-a1000 and sun5i-a10s-wobo-i5 board,
both of which have non-working ethernet on recent kernels without this
fix.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 6a7fd522 ]

If ext4_fill_super() fails early, it's possible for ext4_evict_inode()
to call ext4_should_journal_data() before superblock options and flags
are fully set up.  In that case, the iput() on the journal inode can
end up causing a BUG().

Work around this problem by reordering the tests so we only call
ext4_should_journal_data() after we know it's not the journal inode.

Fixes: 2d859db3 ("ext4: fix data corruption in inodes with journalled data")
Fixes: 2b405bfa ("ext4: fix data=journal fast mount/umount hang")
Cc: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 646caa9c ]

Commit 06bd3c36 (ext4: fix data exposure after a crash) uncovered a
deadlock in ext4_writepages() which was previously much harder to hit.
After this commit xfstest generic/130 reproduces the deadlock on small
filesystems.

The problem happens when ext4_do_update_inode() sets LARGE_FILE feature
and marks current inode handle as synchronous. That subsequently results
in ext4_journal_stop() called from ext4_writepages() to block waiting for
transaction commit while still holding page locks, reference to io_end,
and some prepared bio in mpd structure each of which can possibly block
transaction commit from completing and thus results in deadlock.

Fix the problem by releasing page locks, io_end reference, and
submitting prepared bio before calling ext4_journal_stop().

[ Changed to defer the call to ext4_journal_stop() only if the handle
  is synchronous.  --tytso ]
Reported-and-tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit f70749ca ]

An extent with lblock = 4294967295 and len = 1 will pass the
ext4_valid_extent() test:

	ext4_lblk_t last = lblock + len - 1;

	if (len == 0 || lblock > last)
		return 0;

since last = 4294967295 + 1 - 1 = 4294967295. This would later trigger
the BUG_ON(es->es_lblk + es->es_len < es->es_lblk) in ext4_es_end().

We can simplify it by removing the - 1 altogether and changing the test
to use lblock + len <= lblock, since now if len = 0, then lblock + 0 ==
lblock and it fails, and if len > 0 then lblock + len > lblock in order
to pass (i.e. it doesn't overflow).

Fixes: 5946d089 ("ext4: check for overlapping extents in ext4_valid_extent_entries()")
Fixes: 2f974865 ("ext4: check for zero length extent explicitly")
Cc: Eryu Guan <guaneryu@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 15e4292a ]

This patch fixes an issue that the CFIFOSEL register value is possible
to be changed by usbhsg_ep_enable() wrongly. And then, a data transfer
using CFIFO may not work correctly.

For example:
 # modprobe g_multi file=usb-storage.bin
 # ifconfig usb0 192.168.1.1 up
 (During the USB host is sending file to the mass storage)
 # ifconfig usb0 down

In this case, since the u_ether.c may call usb_ep_enable() in
eth_stop(), if the renesas_usbhs driver is also using CFIFO for
mass storage, the mass storage may not work correctly.

So, this patch adds usbhs_lock() and usbhs_unlock() calling in
usbhsg_ep_enable() to protect CFIFOSEL register. This is because:
 - CFIFOSEL.CURPIPE = 0 is also needed for the pipe configuration
 - The CFIFOSEL (fifo->sel) is already protected by usbhs_lock()

Fixes: 97664a20 ("usb: renesas_usbhs: shrink spin lock area")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 4fdef698 ]

This patch fixes an issue that the xfer_work() is possible to cause
NULL pointer dereference if the usb cable is disconnected while data
transfer is running.

In such case, a gadget driver may call usb_ep_disable()) before
xfer_work() is actually called. In this case, the usbhs_pkt_pop()
will call usbhsf_fifo_unselect(), and then usbhs_pipe_to_fifo()
in xfer_work() will return NULL.

Fixes: e73a9891 ("usb: renesas_usbhs: add DMAEngine support")
Cc: <stable@vger.kernel.org> # v3.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9b53d9af ]

This patch fixes the setup sequence in xfer_work(). Otherwise,
sometimes a usb transaction will get stuck.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit fc8a601e ]

Several users reported wifi cannot be unblocked as discussed in [1].
This patch removes the use of the 2009 flag by BIOS but uses the actual
WMI function calls - it will be skipped if WMI reports unsupported.

[1] https://bugzilla.kernel.org/show_bug.cgi?id=69131Signed-off-by: Alex Hung <alex.hung@canonical.com>
Tested-by: Evgenii Shatokhin <eugene.shatokhin@yandex.ru>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit e51e4d8a ]

When the clk_get() of "uart" clock returns EPROBE_DEFER, the next re-probe
finishes with success but uses invalid (ERR_PTR) values.  This leads to
dereferencing of ERR_PTR stored under ourport->clk:

	12c30000.serial: Controller clock not found
	(...)
	12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, base_baud = 0) is a S3C6400/10
	Unable to handle kernel paging request at virtual address fffffdfb

	(clk_prepare) from [<c039f7d0>] (s3c24xx_serial_pm+0x20/0x128)
	(s3c24xx_serial_pm) from [<c0395414>] (uart_change_pm+0x38/0x40)
	(uart_change_pm) from [<c039689c>] (uart_add_one_port+0x31c/0x44c)
	(uart_add_one_port) from [<c03a035c>] (s3c24xx_serial_probe+0x2a8/0x418)
	(s3c24xx_serial_probe) from [<c03ee110>] (platform_drv_probe+0x50/0xb0)
	(platform_drv_probe) from [<c03ecb44>] (driver_probe_device+0x1f4/0x2b0)
	(driver_probe_device) from [<c03eb0c0>] (bus_for_each_drv+0x44/0x8c)
	(bus_for_each_drv) from [<c03ec8c8>] (__device_attach+0x9c/0x100)
	(__device_attach) from [<c03ebf54>] (bus_probe_device+0x84/0x8c)
	(bus_probe_device) from [<c03ec388>] (deferred_probe_work_func+0x60/0x8c)
	(deferred_probe_work_func) from [<c012fee4>] (process_one_work+0x120/0x328)
	(process_one_work) from [<c0130150>] (worker_thread+0x2c/0x4ac)
	(worker_thread) from [<c0135320>] (kthread+0xd8/0xf4)
	(kthread) from [<c0107978>] (ret_from_fork+0x14/0x3c)

The first unsuccessful clk_get() causes s3c24xx_serial_init_port() to
exit with failure but the s3c24xx_uart_port is left half-configured
(e.g. port->mapbase is set, clk contains ERR_PTR).  On next re-probe,
the function s3c24xx_serial_init_port() will exit early with success
because of configured port->mapbase and driver will use old values,
including the ERR_PTR as clock.

Fix this by cleaning the port->mapbase on error path so each re-probe
will initialize all of the port settings.

Fixes: 60e93575 ("serial: samsung: enable clock before clearing pending interrupts during init")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit d9fc8807 ]

Fix a memory leak resulting from memory allocation in safe_name().
This patch fixes all call sites of safe_name().

Mathieu Malaterre reported the memory leak on boot:

On my PowerMac device-tree would generate a duplicate name:

[    0.023043] device-tree: Duplicate name in PowerPC,G4@0, renamed to "l2-cache#1"

in this case a newly allocated name is generated by `safe_name`. However
in this case it is never deallocated.

The bug was found using kmemleak reported as:

unreferenced object 0xdf532e60 (size 32):
  comm "swapper", pid 1, jiffies 4294892300 (age 1993.532s)
  hex dump (first 32 bytes):
    6c 32 2d 63 61 63 68 65 23 31 00 dd e4 dd 1e c2  l2-cache#1......
    ec d4 ba ce 04 ec cc de 8e 85 e9 ca c4 ec cc 9e  ................
  backtrace:
    [<c02d3350>] kvasprintf+0x64/0xc8
    [<c02d3400>] kasprintf+0x4c/0x5c
    [<c0453814>] safe_name.isra.1+0x80/0xc4
    [<c04545d8>] __of_attach_node_sysfs+0x6c/0x11c
    [<c075f21c>] of_core_init+0x8c/0xf8
    [<c0729594>] kernel_init_freeable+0xd4/0x208
    [<c00047e8>] kernel_init+0x24/0x11c
    [<c00158ec>] ret_from_kernel_thread+0x5c/0x64

Link: https://bugzilla.kernel.org/show_bug.cgi?id=120331Signed-off-by: Frank Rowand <frank.rowand@am.sony.com>
Reported-by: mathieu.malaterre@gmail.com
Tested-by: Mathieu Malaterre <mathieu.malaterre@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit b30bdfa8 ]

As it is if you ask for a sync gcm you may actually end up with
an async one because it does not filter out async implementations
of ghash.

This patch fixes this by adding the necessary filter when looking
for ghash.

Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9cad39fe ]

commit f3af3651 ("usb: dwc3: gadget: always
enable IOC on bulk/interrupt transfers") ended up
regressing Isochronous endpoints by clearing
DWC3_EP_BUSY flag too early, which resulted in
choppy audio playback over USB.

Fix that by partially reverting original commit and
making sure that we check for isochronous endpoints.

Fixes: f3af3651 ("usb: dwc3: gadget: always enable IOC
		on bulk/interrupt transfers")
Cc: <stable@vger.kernel.org>
Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com>
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit dc19ed15 ]

For the third time in three years, I'm changing my e-mail at
Samsung. That's bad, as it may stop communications with me for
a while. So, this time, I'll also the mchehab@kernel.org e-mail,
as it remains stable since ever.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit a246b819 ]

NBANK() macro assumes that ngpios is a multiple of 8(BANK_SZ) and
hence results in 0 banks for PCA9536 which has just 4 gpios. This is
wrong as PCA9356 has 1 bank with 4 gpios. This results in uninitialized
PCA953X_INVERT register. Fix this by using DIV_ROUND_UP macro in
NBANK().

Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>

[ Upstream commit 9ac0108c ]

Similar to the AR93xx series, the AR94xx and the Qualcomm QCA988x also have
the same quirk for the Bus Reset.

Fixes: c3e59ee4 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org  # v3.14+
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>