- 04 May, 2016 40 commits
-
-
Sakari Ailus authored
commit e7e0c3e2 upstream. The number of planes in videobuf2 is specific to a buffer. In order to verify that the planes array provided by the user is long enough, a new vb2_buf_op is required. Call __verify_planes_array() when the dequeued buffer is known. Return an error to the caller if there was one, otherwise remove the buffer from the done list. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ricardo Ribalda Delgado authored
commit b9387684 upstream. When using a device is read/write mode, vb2 does not handle properly the first select/poll operation. The reason for this, is that when this code has been refactored, some of the operations have changed their order, and now fileio emulator is not started. The reintroduced check to the core is enabled by a quirk flag, that avoids this check by other subsystems like DVB. Fixes: 49d8ab9f ("media] media: videobuf2: Separate vb2_poll()") Reported-by:
Dimitrios Katsaros <patcherwork@gmail.com> Cc: Junghak Sung <jh1009.sung@samsung.com> Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 89a09566 upstream. On page unaligned frames, create_framevec forces get_vaddr_frames to allocate an extra page at the end of the buffer. Under some circumstances, this leads to -EINVAL on VIDIOC_QBUF. E.g: We have vm_a that vm_area that goes from 0x1000 to 0x3000. And a frame that goes from 0x1800 to 0x2800, i.e. 2 pages. frame_vector_create will be called with the following params: get_vaddr_frames(0x1800, 2, write, 1, vec); get_vaddr will allocate the first page after checking that the memory 0x1800-0x27ff is valid, but it will not allocate the second page because the range 0x2800-0x37ff is out of the vm_a range. This results in create_framevec returning -EFAULT Error Trace: [ 9083.793015] video0: VIDIOC_QBUF: 00:00:00.00000000 index=1, type=vid-cap, flags=0x00002002, field=any, sequence=0, memory=userptr, bytesused=0, offset/userptr=0x7ff2b023ca80, length=5765760 [ 9083.793028] timecode=00:00:00 type=0, flags=0x00000000, frames=0, userbits=0x00000000 [ 9083.793117] video0: VIDIOC_QBUF: error -22: 00:00:00.00000000 index=2, type=vid-cap, flags=0x00000000, field=any, sequence=0, memory=userptr, bytesused=0, offset/userptr=0x7ff2b07bc500, length=5765760 Also use true instead of 1 since that argument is a bool in the get_vaddr_frames() prototype. Fixes: 21fb0cb7 ("[media] vb2: Provide helpers for mapping virtual addresses") Reported-by:
Albert Antony <albert@newtec.dk> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Sugar Zhang authored
commit 653aa464 upstream. this patch corrects the interface adc/dac control register definition according to datasheet. Signed-off-by:
Sugar Zhang <sugar.zhang@rock-chips.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Mark Brown authored
commit 47325078 upstream. The dummy component is reused for all cards so we special case and don't bind it to any of them. This means that code like that displaying the component widgets that tries to look at the card will crash. In the future we will fix this by ensuring that the dummy component looks like other components but that is invasive and so not suitable for a fix. Instead add a special case check here. Reported-by:
Harry Pan <harry.pan@intel.com> Suggested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit 712a8038 upstream. When the ssm4567 is powered up the driver calles regcache_sync() to restore the register map content. regcache_sync() assumes that the device is in its power-on reset state. Make sure that this is the case by explicitly resetting the ssm4567 register map before calling regcache_sync() otherwise we might end up with a incorrect register map which leads to undefined behaviour. One such undefined behaviour was observed when returning from system suspend while a playback stream is active, in that case the ssm4567 was kept muted after resume. Fixes: 1ee44ce0 ("ASoC: ssm4567: Add driver for Analog Devices SSM4567 amplifier") Reported-by:
Harsha Priya <harshapriya.n@intel.com> Tested-by:
Fang, Yang A <yang.a.fang@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit ba4bc32e upstream. An older patch to convert the API in the s3c i2s driver ended up passing a const pointer into a function that takes a non-const pointer, so we now get a warning: sound/soc/samsung/s3c2412-i2s.c: In function 's3c2412_iis_dev_probe': sound/soc/samsung/s3c2412-i2s.c:172:9: error: passing argument 3 of 's3c_i2sv2_register_component' discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] However, the s3c_i2sv2_register_component() function again passes the pointer into another function taking a const, so we just need to change its prototype. Fixes: eca3b01d ("ASoC: switch over to use snd_soc_register_component() on s3c i2s") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
-
Tony Luck authored
commit c4fc1956 upstream. Both of these drivers can return NOTIFY_BAD, but this terminates processing other callbacks that were registered later on the chain. Since the driver did nothing to log the error it seems wrong to prevent other interested parties from seeing it. E.g. neither of them had even bothered to check the type of the error to see if it was a memory error before the return NOTIFY_BAD. Signed-off-by:
Tony Luck <tony.luck@intel.com> Acked-by:
Aristeu Rozanski <aris@redhat.com> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Azael Avalos authored
commit a30b8f81 upstream. Commit 52cbae01 ("toshiba_acpi: Change default Hotkey enabling value") changed the hotkeys enabling value, as it was the same value Windows uses, however, it turns out that the value tells the EC that the driver will now take care of the hardware events like the physical RFKill switch or the pointing device toggle button. This patch reverts such commit by changing the default hotkey enabling value to 0x09, which enables hotkey events only, making the hardware buttons working again. Fixes bugs 113331 and 114941. Signed-off-by:
Azael Avalos <coproscefalo@gmail.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Adrian Hunter authored
commit 6e1c7d61 upstream. Baytrail eMMC/SD/SDIO host controllers have been known to hang. A change to a hardware setting has been found to reduce the occurrence of such hangs. This patch ensures the correct setting. This patch applies cleanly to v4.4+. It could go to earlier kernels also, so I will send backports to the stable list in due course. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Lv Zheng authored
commit 5508df89 upstream. It is reported that the following commit triggers regressions: Linux commit: efaed9be ACPICA commit: 31178590dde82368fdb0f6b0e466b6c0add96c57 Subject: ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages This is because that the ECDT support is not corrected in Linux, and Linux requires to execute _REG for ECDT (though this sounds so wrong), we need to ensure acpi_gbl_namespace_initialized is set before ECDT probing in order for _REG to be executed. Since we have to move "acpi_gbl_namespace_initialized = TRUE" to the initialization step happening before ECDT probing, acpi_load_tables() is the best candidate for now. Thus this patch fixes the regression by doing so. But if the ECDT support is fixed, Linux will not execute _REG for ECDT, and ECDT probing will happen before acpi_load_tables(). At that time, we still want to ensure acpi_gbl_namespace_initialized is set after executing acpi_ns_initialize_objects() (under the condition of acpi_gbl_group_module_level_code = FALSE), this patch also moves acpi_ns_initialize_objects() to acpi_load_tables() accordingly. Since acpi_ns_initialize_objects() doesn't seem to be skippable, this patch also removes ACPI_NO_OBJECT_INIT for the one invoked in acpi_load_tables(). And since the default region handlers should always be installed before loading the tables, this patch also removes useless acpi_gbl_group_module_level_code check accordingly. Reported by Chris Bainbridge, Fixed by Lv Zheng. Fixes: efaed9be (ACPICA: Events: Enhance acpi_ev_execute_reg_method() to ensure no _REG evaluations can happen during OS early boot stages) Reported-and-tested-by:
Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Javier Martinez Canillas authored
commit 10ff4c52 upstream. The exynos5 I2C controller driver always prepares and enables a clock before using it and then disables unprepares it when the clock is not used anymore. But this can cause a possible ABBA deadlock in some scenarios since a driver that uses regmap to access its I2C registers, will first grab the regmap lock and then the I2C xfer function will grab the prepare lock when preparing the I2C clock. But since the clock driver also uses regmap for I2C accesses, preparing a clock will first grab the prepare lock and then the regmap lock when using the regmap API. An example of this happens on the Exynos5422 Odroid XU4 board where a s2mps11 PMIC is used and both the s2mps11 regulators and clk drivers share the same I2C regmap. The possible deadlock is reported by the kernel lockdep: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(sec_core:428:(regmap)->lock); lock(prepare_lock); lock(sec_core:428:(regmap)->lock); lock(prepare_lock); *** DEADLOCK *** Fix it by leaving the code prepared on probe and use {en,dis}able in the I2C transfer function. This patch is similar to commit 34e81ad5 ("i2c: s3c2410: fix ABBA deadlock by keeping clock prepared") that fixes the same bug in other driver for an I2C controller found in Samsung SoCs. Reported-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Michael Ellerman authored
commit 609d5a1b upstream. Since commit ea8daa7b ("kbuild: Add option to turn incompatible pointer check into error"), assignments from an incompatible pointer types have become a hard error, eg: drivers/i2c/busses/i2c-cpm.c:545:91: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type Fix the build break by converting txdma & rxdma to dma_addr_t. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Adrian Hunter authored
commit 1342e0b7 upstream. Tracing a workload that uses transactions gave a seg fault as follows: perf record -e intel_pt// workload perf report Program received signal SIGSEGV, Segmentation fault. 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110) at util/intel-pt.c:929 929 ptq->last_branch_rb->nr = 0; (gdb) p ptq->last_branch_rb $1 = (struct branch_stack *) 0x0 (gdb) up 1148 intel_pt_reset_last_branch_rb(ptq); (gdb) l 1143 if (ret) 1144 pr_err("Intel Processor Trace: failed to deliver transaction event 1145 ret); 1146 1147 if (pt->synth_opts.callchain) 1148 intel_pt_reset_last_branch_rb(ptq); 1149 1150 return ret; 1151 } 1152 (gdb) p pt->synth_opts.callchain $2 = true (gdb) (gdb) bt #0 0x000000000054b58c in intel_pt_reset_last_branch_rb (ptq=0x1a36110) #1 0x000000000054c1e0 in intel_pt_synth_transaction_sample (ptq=0x1a36110) #2 0x000000000054c5b2 in intel_pt_sample (ptq=0x1a36110) Caused by checking the 'callchain' flag when it should have been the 'last_branch' flag. Fix that. Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Linus Walleij authored
commit f36fdacc upstream. The current compile-time check for inversed IENB/CNTL does not work in multiplatform boots: as soon as versatile is included in the build, the IENB/CNTL is switched and breaks graphics. Convert this to a runtime switch. Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Fixes: a29da136 ("ARM: versatile: convert to multi-platform") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Flora Cui authored
commit 56fc3502 upstream. Fixes the following scenario: 1. Page table bo allocated in vram and linked to man->lru. tbo->list_kref.refcount=2 2. Page table bo is swapped out and removed from man->lru. tbo->list_kref.refcount=1 3. Command submission from userspace. Page table bo is moved to vram. ttm_bo_move_to_lru_tail() link it to man->lru and don't increase the kref count. Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
Flora Cui <Flora.Cui@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ville Syrjälä authored
commit 31318a92 upstream. HSW still has the wake FIFO, so let's check it. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Deepak S <deepak.s@linux.intel.com> Fixes: 05a2fb15 ("drm/i915: Consolidate forcewake code") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460633942-24013-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 3d7d0c85) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 1b3e885a upstream. For reasons unknown Sandybridge GT1 (at least) will eventually hang when it encounters a ring wraparound at offset 0. The test case that reproduces the bug reliably forces a large number of interrupted context switches, thereby causing very frequent ring wraparounds, but there are similar bug reports in the wild with the same symptoms, seqno writes stop just before the wrap and the ringbuffer at address 0. It is also timing crucial, but adding various delays hasn't helped pinpoint where the window lies. Whether the fault is restricted to the ringbuffer itself or the GTT addressing is unclear, but moving the ringbuffer fixes all the hangs I have been able to reproduce. References: (e.g.) https://bugs.freedesktop.org/show_bug.cgi?id=93262 Testcase: igt/gem_exec_whisper/render-contexts-interruptible #snb-gt1 Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1460565315-7748-12-git-send-email-chris@chris-wilson.co.uk (cherry picked from commit a687a43a) Signed-off-by:
-
Akash Goel authored
commit d43f3ebf upstream. Currently for the case where there is enough space at the end of Ring buffer for accommodating only the base request, the wrapround is done immediately and as a result the base request gets added at the start of Ring buffer. But there may not be enough free space at the beginning to accommodate the base request, as before the wraparound, the wait was effectively done for the reserved_size free space from the start of Ring buffer. In such a case there is a potential of Ring buffer overflow, the instructions at the head of Ring (ACTHD) can get overwritten. Since the base request can fit in the remaining space, there is no need to wraparound immediately. The wraparound will anyway happen later when the reserved part starts getting used. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Akash Goel <akash.goel@intel.com> Signed-off-by:
-
Mika Kuoppala authored
commit 510650e8 upstream. Experiments with heaven 4.0 benchmark and skylake gt3e (rev 0xa) suggest that WaForceContextSaveRestoreNonCoherent is needed for all revs. Extending this to all revs cures a gpu hang with rev 0xa when running heaven4.0 gpu benchmark. We have been here before, with problems enabling gt4e and extending up to revision F0 instead of false claims of bspec of E0 only. See commit <e238659d> ("drm/i915/skl: Default to noncoherent access up to F0"). In retrospect we should have covered this with this big blanket back then already, as E0 vs F0 discrepancy was suspicious enough. Previously the WaForceEnableNonCoherent has been tied to context non-coherence, atleast in relevant hsds. So keep this tie and extended this alongside. Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Timo Aaltonen <tjaalton@ubuntu.com> Reported-by:
Mike Lothian <mike@fireburn.co.uk> References: https://bugs.freedesktop.org/show_bug.cgi?id=93491Signed-off-by:
Ben Widawsky <benjamin.widawsky@intel.com> Tested-by:
Timo Aaltonen <tjaalton@ubuntu.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459860977-27751-2-git-send-email-mika.kuoppala@intel.com (cherry picked from commit 97ea6be1) Signed-off-by:
-
Mat Martineau authored
commit a41c8882 upstream. The driver does not load firmware for unknown steppings, so these new steppings must be added to the list. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 93fce954 upstream. At the end of the function we expect "status" to be zero, but it's either -EINVAL or uninitialized. Fixes: 788bf83d ('drm/amdkfd: Add wave control operation to debugger') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
Ville Syrjälä authored
commit fa5a7970 upstream. Pass BIT(DRM_ROTATE_0) instead of DRM_ROTATE_0 to skl_update_scaler(). The former is a mask, the latter just the bit number. Fortunately the only thing skl_update_scaler() does with the rotation is check if it's 90/270 degrees or not, and so in this case it would still do the right thing. Cc: Chandra Konduru <chandra.konduru@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit f1ecaf8f upstream. ilk_compute_pipe_wm() assumes as zeroed pipe_wm structure when it starts. We used to pass such a zeroed struct in, but this got broken when the pipe_wm structure got embedded in the crtc state. To fix it without too much fuzz, we need to resort to a memset(). Fixes: 4e0963c7 ("drm/i915: Calculate pipe watermarks into CRTC state (v3)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit d890565c upstream. ilk_program_watermarks() is supposed to merge the active watermarks from all pipes. Thus we need to use the active config too instead of some precomputed stuff. Fixes: aa363136 ("drm/i915: Calculate watermark configuration during atomic check (v2)") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Ville Syrjälä authored
commit 7d3fdfff upstream. Restore the lost phys status page cleanup. Fixes the following splat with DMA_API_DEBUG=y: WARNING: CPU: 0 PID: 21615 at ../lib/dma-debug.c:974 dma_debug_device_change+0x190/0x1f0() pci 0000:00:02.0: DMA-API: device driver has pending DMA allocations while released from device [count=1] One of leaked entries details: [device address=0x0000000023163000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Modules linked in: i915(-) i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm sha256_generic hmac drbg ctr ccm sch_fq_codel binfmt_misc joydev mousedev arc4 ath5k iTCO_wdt mac80211 smsc_ircc2 ath snd_intel8x0m snd_intel8x0 snd_ac97_codec ac97_bus psmouse snd_pcm input_leds i2c_i801 pcspkr snd_timer cfg80211 snd soundcore i2c_core ehci_pci firewire_ohci ehci_hcd firewire_core lpc_ich 8139too rfkill crc_itu_t mfd_core mii usbcore rng_core intel_agp intel_gtt usb_common agpgart irda crc_ccitt fujitsu_laptop led_class parport_pc video parport evdev backlight CPU: 0 PID: 21615 Comm: rmmod Tainted: G U 4.4.0-rc4-mgm-ovl+ #4 Hardware name: FUJITSU SIEMENS LIFEBOOK S6120/FJNB16C, BIOS Version 1.26 05/10/2004 e31a3de0 e31a3de0 e31a3d9c c128d4bd e31a3dd0 c1045a0c c15e00c4 e31a3dfc 0000546f c15dfad2 000003ce c12b3740 000003ce c12b3740 00000000 00000001 f61fb8a0 e31a3de8 c1045a83 00000009 e31a3de0 c15e00c4 e31a3dfc e31a3e4c Call Trace: [<c128d4bd>] dump_stack+0x16/0x19 [<c1045a0c>] warn_slowpath_common+0x8c/0xd0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c12b3740>] ? dma_debug_device_change+0x190/0x1f0 [<c1045a83>] warn_slowpath_fmt+0x33/0x40 [<c12b3740>] dma_debug_device_change+0x190/0x1f0 [<c1065499>] notifier_call_chain+0x59/0x70 [<c10655af>] __blocking_notifier_call_chain+0x3f/0x80 [<c106560f>] blocking_notifier_call_chain+0x1f/0x30 [<c134cfb3>] __device_release_driver+0xc3/0xf0 [<c134d0d7>] driver_detach+0x97/0xa0 [<c134c440>] bus_remove_driver+0x40/0x90 [<c134db18>] driver_unregister+0x28/0x60 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c12c0618>] pci_unregister_driver+0x18/0x80 [<f83e96e7>] drm_pci_exit+0x87/0xb0 [drm] [<f8b3be2d>] i915_exit+0x1b/0x1ee [i915] [<c10b999c>] SyS_delete_module+0x14c/0x210 [<c1079e8c>] ? trace_hardirqs_on_caller+0x12c/0x1d0 [<c115a9bd>] ? ____fput+0xd/0x10 [<c1002014>] do_fast_syscall_32+0xa4/0x450 [<c149f6fa>] sysenter_past_esp+0x3b/0x5d ---[ end trace c2ecbc77760f10a0 ]--- Mapped at: [<c12b3183>] debug_dma_alloc_coherent+0x33/0x90 [<f83e989c>] drm_pci_alloc+0x18c/0x1e0 [drm] [<f8acd59f>] intel_init_ring_buffer+0x2af/0x490 [i915] [<f8acd8b0>] intel_init_render_ring_buffer+0x130/0x750 [i915] [<f8aaea4e>] i915_gem_init_rings+0x1e/0x110 [i915] v2: s/BUG_ON/WARN_ON/ since dim doens't like the former anymore Cc: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 5c6c6003 ("drm/i915: Remove DRI1 ring accessors and API") Signed-off-by:
-
Ville Syrjälä authored
commit d919161b upstream. We're supposed to pass the primary DP encoder to intel_ddi_clk_select(), not the fake MST encoder. Do so. There's no real bug here though, since intel_ddi_clk_select() only checks if the encoder type is EDP (which it isn't for either the primary DP encoder or the fake MST encoder), and it gets the DDI port via intel_ddi_get_encoder_port() (which knows how to do the fake->primary->port dance itself). Fixes: e404ba8 ("drm/i915: Setup DDI clk for MST on SKL") Signed-off-by:
-
Vladimir Zapolskiy authored
commit c5857e3f upstream. The change fixes potential oops while accessing iomem on invalid address if devm_ioremap_resource() fails due to some reason. The devm_ioremap_resource() function returns ERR_PTR() and never returns NULL, which makes useless a following check for NULL. Signed-off-by:
Vladimir Zapolskiy <vz@mleia.com> Fixes: 3a9f5957 ("pwm: Add Broadcom BCM7038 PWM controller support") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
cpaul@redhat.com authored
commit 263efde3 upstream. We can thank KASAN for finding this, otherwise I probably would have spent hours on it. This fixes a somewhat harder to trigger kernel panic, occuring while enabling MST where the port we were currently updating the payload on would have all of it's refs dropped before we finished what we were doing: ================================================================== BUG: KASAN: use-after-free in drm_dp_update_payload_part1+0xb3f/0xdb0 [drm_kms_helper] at addr ffff8800d29de018 Read of size 4 by task Xorg/973 ============================================================================= BUG kmalloc-2048 (Tainted: G B W ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] age=16477 cpu=0 pid=2175 ___slab_alloc+0x472/0x490 __slab_alloc+0x20/0x40 kmem_cache_alloc_trace+0x151/0x190 drm_dp_add_port+0x1aa/0x1ed0 [drm_kms_helper] drm_dp_send_link_address+0x526/0x960 [drm_kms_helper] drm_dp_check_and_send_link_address+0x1ac/0x210 [drm_kms_helper] drm_dp_mst_link_probe_work+0x77/0xd0 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 INFO: Freed in drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] age=7521 cpu=0 pid=2175 __slab_free+0x17f/0x2d0 kfree+0x169/0x180 drm_dp_free_mst_port+0x50/0x60 [drm_kms_helper] drm_dp_destroy_connector_work+0x2b8/0x490 [drm_kms_helper] process_one_work+0x562/0x1350 worker_thread+0xd9/0x1390 kthread+0x1c5/0x260 ret_from_fork+0x22/0x40 which on this T460s, would eventually lead to kernel panics in somewhat random places later in intel_mst_enable_dp() if we got lucky enough. Signed-off-by:
Lyude <cpaul@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Lyude authored
commit 9dc0487d upstream. Some hubs are forgetful, and end up forgetting whatever GUID we set previously after we do a suspend/resume cycle. This can lead to hotplugging breaking (along with probably other things) since the hub will start sending connection notifications with the wrong GUID. As such, we need to check on resume whether or not the GUID the hub is giving us is valid. Signed-off-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
cpaul@redhat.com authored
commit deba0a2a upstream. With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. Signed-off-by:
David Airlie <airlied@linux.ie> Signed-off-by:
-
Ben Skeggs authored
commit 28dca905 upstream. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Huacai Chen authored
commit 221004c6 upstream. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Reviewed-by:
-
Vitaly Prosyak authored
commit 5d5b7803 upstream. When crtc/timing is disabled on boot the dig block should be stopped in order ignore timing from crtc, reset the steering fifo otherwise we get display corruption or hung in dp sst mode. v2: agd: fix coding style Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Signed-off-by:
-
Jérôme Glisse authored
commit b5dcec69 upstream. Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Signed-off-by:
-
Alex Deucher authored
commit 7403c515 upstream. This got lost somewhere along the way. This fixes audio not working until set_property was called. Noticed-by:
Hyungwon Hwang <hyungwon.hwang7@gmail.com> Signed-off-by:
-
Alex Deucher authored
commit bcb31eba upstream. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76490Signed-off-by:
-
Grigori Goronzy authored
This fix was written against drm-next, but when it was backported to 4.5 as a stable fix, the driver internal structure change was missed. Fix that up here to avoid a hang due to waiting for the wrong sequence number. v2: agd: fix up commit message Signed-off-by:
Grigori Goronzy <greg@chown.ath.cx> Cc: stable@vger.kernel.org Signed-off-by:
-
Sonny Jiang authored
commit 562e2689 upstream. Was previously always hardcoded to 0. Signed-off-by:
Sonny Jiang <sonny.jiang@amd.com> Reviewed-by:
-
Alex Deucher authored
commit 83c5cda2 upstream. Fixes array overflow on these chips. Reviewed-by:
-
