- 26 Apr, 2007 40 commits
-
-
Patrick McHardy authored
skb_copy_expand changes the headroom, so it needs to adjust the header offsets by the difference between the old and the new value. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Rusty added a new 'stats' field to struct net_device. loopback driver can use it instead of declaring another struct net_device_stats This saves some memory. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Akinobu Mita authored
This patch checks kmem_cache_create() error and aborts loading module on failure. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
For case of bridging pseudo devices, the get created/destroyed (Xen) need to allow setting address to any valid value. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
Need to tell STP daemon about more events, like any time a device is added even when it is down. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
The RSTP daemon needs to be able to flush all dynamic forwarding entries in the case of topology change. This is a temporary interface. It will change to a netlink interface before RSTP daemon is officially released. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
Instead of hashing the whole Ethernet address, it should be faster to just use the last 4 bytes. Add a random salt value to the hash to make it more difficult to construct worst case DoS hash chains. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
While in the STP learning state, don't route packets; wait until forwarding delay has expired. The purpose of the forwarding delay is to detect loops in the network, and if a brouter started up and started forwarding, it could cause a flood. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Stephen Hemminger authored
Change the bridging hook to be simple function with return value rather than modifying the skb argument. This could generate better code and is cleaner. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
-
Herbert Xu authored
When a transmitted packet is looped back directly, CHECKSUM_PARTIAL maps to the semantics of CHECKSUM_UNNECESSARY. Therefore we should treat it as such in the stack. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
When csum_offset was introduced we did a conversion from csum to csum_offset where applicable. A couple of drivers were missed in this process. It was harmless to begin with since the two fields coincided. Now that we've made them different with the addition of csum_start, the missed drivers must be converted or they can't send packets out at all that require checksum offload. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
The skb transport pointer is currently used to specify the start of the checksum region for transmit checksum offload. Unfortunately, the same pointer is also used during receive side processing. This creates a problem when we want to retransmit a received packet with partial checksums since the skb transport pointer would be overwritten. This patch solves this problem by creating a new 16-bit csum_start offset value to replace the skb transport header for the purpose of checksums. This offset is calculated from skb->head so that it does not have to change when skb->data changes. No extra space is required since csum_offset itself fits within a 16-bit word so we can use the other 16 bits for csum_start. For backwards compatibility, just before we push a packet with partial checksums off into the device driver, we set the skb transport header to what it would have been under the old scheme. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
esp_init_state doesn't account for the beet pseudo header in the header_len calculation, which may result in undersized skbs hitting xfrm4_beet_output, causing unnecessary reallocations in ip_finish_output2. The skbs should still always have enough room to avoid causing skb_under_panic in skb_push since we have at least 16 bytes available from LL_RESERVED_SPACE in xfrm_state_check_space. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Replace the probing based MTU estimation, which usually takes 2-3 iterations to find a fitting value and may underestimate the MTU, by an exact calculation. Also fix underestimation of the XFRM trailer_len, which causes unnecessary reallocations. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Fix incorrect switch of "trailer" skb by "skb" during skb_tail_pointer conversion: - *(u8*)(trailer->tail - 1) = top_iph->protocol; + *(skb_tail_pointer(skb) - 1) = top_iph->protocol; - *(u8 *)(trailer->tail - 1) = *skb_network_header(skb); + *(skb_tail_pointer(skb) - 1) = *skb_network_header(skb); Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Since we're increasing the headroom, the header offsets need to be increased by the same amount as well. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki authored
When looking up route for destination with rules with source address restrictions, we may need to find a source address for the traffic if not given. Based on patch from Noriaki TAKAMIYA <takamiya@po.ntts.co.jp>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Patrick McHardy authored
Remove unnecessary initialization/variable. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The most common trigger of these errors is that the config option hasn't been enable wich would make the functionality available. Therefore returning EOPNOTSUPP gives a better idea on what is going wrong. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Howells authored
Move generic skbuff stuff from XFRM code to generic code so that AF_RXRPC can use it too. The kdoc comments I've attached to the functions needs to be checked by whoever wrote them as I had to make some guesses about the workings of these functions. Signed-off-By: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
Arnaldo Carvalho de Melo authored
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
Arnaldo Carvalho de Melo authored
To clearly state the intent of copying to linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
-
David S. Miller authored
We have to put back the cast to "char *" because these pointers are volatile. Reported by Andrew Morton. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rusty Russell authored
Network drivers which keep stats allocate their own stats structure then write a get_stats() function to return them. It would be nice if this were done by default. 1) Add a new "stats" field to "struct net_device". 2) Add a new feature field to say "this driver uses the internal one" 3) Have a default "get_stats" which returns NULL if that feature not set. 4) Change callers to check result of get_stats call for NULL, not if ->get_stats is set. This should not break backwards compatibility with older drivers, yet allow modern drivers to shed some boilerplate code. Lightly tested: works for a modified lguest network driver. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In order to get more randomness for secure_tcpv6_sequence_number(), secure_tcp_sequence_number(), secure_dccp_sequence_number() functions, we can use the high resolution time services, providing nanosec resolution. I've also done two kmalloc()/kzalloc() conversions. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnaldo Carvalho de Melo authored
To clearly state the intent of copying from linear sk_buffs, _offset being a overly long variant but interesting for the sake of saving some bytes. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
For consistency with other skb data accessors, reducing the number of direct accesses to skb->data. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Eric Dumazet authored
As IPPROTO_TCP is 6, it makes sense to make sure inet_protos[] array is properly cache line aligned to avoid false sharing on SMP. c0680540 b peer_total c0680544 b inet_peer_unused_head c0680560 B inet_protos On i386 this example, we can see that inet_protos[IPPROTO_TCP] shares a potentially hot (and modified) cache line. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_memory_pressure and tcp_socket currently share a cache line with tcp_memory_allocated, tcp_sockets_allocated. (Very hot cache line) It makes sense to declare these variables as __read_mostly, to avoid false sharing on SMP. ffffffff8081d9c0 B tcp_orphan_count ffffffff8081d9c4 B tcp_memory_allocated ffffffff8081d9c8 B tcp_sockets_allocated ffffffff8081d9cc B tcp_memory_pressure ffffffff8081d9d0 b tcp_md5sig_users ffffffff8081d9d8 b tcp_md5sig_pool ffffffff8081d9e0 b warntime.31570 ffffffff8081d9e8 b tcp_socket Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The results of FIB rules lookups are cached in the routing cache except for IPv6 as no such cache exists. So far, it was the responsibility of the user to flush the cache after modifying any rules. This lead to many false bug reports due to misunderstanding of this concept. This patch automatically flushes the route cache after inserting or deleting a rule. Thanks to Muli Ben-Yehuda <muli@il.ibm.com> for catching a bug in the previous patch. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
There is a very tiny probability that build_ehash_secret() is called at the same time by different CPUS. Also, using __read_mostly is a must for inet_ehash_secret Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Herbert Xu authored
Right now Xen has a horrible hack that lets it forward packets with partial checksums. One of the reasons that CHECKSUM_PARTIAL and CHECKSUM_COMPLETE were added is so that we can get rid of this hack (where it creates two extra bits in the skbuff to essentially mirror ip_summed without being destroyed by the forwarding code). I had forgotten that I've already gone through all the deivce drivers last time around to make sure that they're looking at ip_summed == CHECKSUM_PARTIAL rather than ip_summed != 0 on transmit. In any case, I've now done that again so it should definitely be safe. Unfortunately nobody has yet added any code to update CHECKSUM_COMPLETE values on forward so we I'm setting that to CHECKSUM_NONE. This should be safe to remove for bridging but I'd like to check that code path first. So here is the patch that lets us get rid of the hack by preserving ip_summed (mostly) on forwarded packets. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Janusz Krzysztofik authored
this is a small patch by Janusz Krzysztofik to ip_route_output_slow() that allows VIP-less LVS linux director to generate packets originating >From VIP if sysctl_ip_nonlocal_bind is set. In a nutshell, the intention is for an LVS linux director to be able to send ICMP unreachable responses to end-users when real-servers are removed. http://archive.linuxvirtualserver.org/html/lvs-users/2007-01/msg00106.htmlSigned-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
The use of nop rules simplifies the usage of goto rules and adds more flexibility as they allow targets to remain while the actual content of the branches can change easly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
Rules which match against device names in their selector can remain while the device itself disappears, in fact the device doesn't have to present when the rule is added in the first place. The device name is resolved by trying when the rule is added and later by listening to NETDEV_REGISTER/UNREGISTER notifications. This patch adds the flag FIB_RULE_DEV_DETACHED which is set towards userspace when a rule contains a device match which is unresolved at the moment. This eases spotting the reason why certain rules seem not to function properly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Thomas Graf authored
This patch adds a new rule action FR_ACT_GOTO which allows to skip a set of rules by jumping to another rule. The rule to jump to is specified via the FRA_GOTO attribute which carries a rule preference. Referring to a rule which doesn't exists is explicitely allowed. Such goto rules are marked with the flag FIB_RULE_UNRESOLVED and will act like a rule with a non-matching selector. The rule will become functional as soon as its target is present. The goto action enables performance optimizations by reducing the average number of rules that have to be passed per lookup. Example: 0: from all lookup local 40: not from all to 192.168.23.128 goto 32766 41: from all fwmark 0xa blackhole 42: from all fwmark 0xff blackhole 32766: from all lookup main Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Caused by skb_reset_mac_header() changes, missing semicolon. Signed-off-by: David S. Miller <davem@davemloft.net>
-