- 17 Apr, 2015 40 commits
-
-
Dan Carpenter authored
This doesn't change how the code works, but clearly the curly braces were intended. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Sougata Santra <sougata@tuxera.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Chengyu Song authored
In case of memory allocation error, the return should be -ENOMEM, instead of -ENOSPC. Signed-off-by:
Chengyu Song <csong84@gatech.edu> Signed-off-by:
-
Ryusuke Konishi authored
Use inode_set_flags() to atomically set i_flags instead of clearing out the S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the FS_IMMUTABLE_FL, FS_APPEND_FL flags to avoid a race where an immutable file has the immutable flag cleared for a brief window of time. This is a similar fix to commit 5f16f322 ("ext4: atomically set inode->i_flags in ext4_set_inode_flags()"). Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: "Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Ryusuke Konishi authored
nilfs_set_inode_flags() function adjusts gfp-mask of inode->i_mapping as well as i_flags, however, this coupling of operations is not appropriate. For instance, nilfs_ioctl_setflags(), one of three callers of nilfs_set_inode_flags(), doesn't need to reinitialize the gfp-mask at all. In addition, nilfs_new_inode(), another caller of nilfs_set_inode_flags(), doesn't either because it has already initialized the gfp-mask. Only __nilfs_read_inode(), the remaining caller, needs it. So, this moves the gfp mask manipulation to __nilfs_read_inode() from nilfs_set_inode_flags(). Signed-off-by:
-
Ryusuke Konishi authored
Fix the following build warning: fs/nilfs2/super.c: In function 'nilfs_checkpoint_is_mounted': fs/nilfs2/super.c:1023:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] if (cno < 0 || cno > nilfs->ns_cno) ^ This warning indicates that the comparision "cno < 0" is useless because variable "cno" has an unsigned integer type "__u64". Signed-off-by:David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Ryusuke Konishi authored
The older a filesystem gets, the slower lscp command becomes. This is because nilfs_cpfile_do_get_cpinfo() function meets more hole blocks as the start offset of valid checkpoint numbers gets bigger. This reduces the overhead by skipping hole blocks efficiently with nilfs_mdt_find_block() helper. A measurement result of this patch is as follows: Before: $ time lscp CNO DATE TIME MODE FLG BLKCNT ICNT 5769303 2015-02-22 19:31:33 cp - 108 1 5769304 2015-02-22 19:38:54 cp - 108 1 real 0m0.182s user 0m0.003s sys 0m0.180s After: $ time lscp CNO DATE TIME MODE FLG BLKCNT ICNT 5769303 2015-02-22 19:31:33 cp - 108 1 5769304 2015-02-22 19:38:54 cp - 108 1 real 0m0.003s user 0m0.001s sys 0m0.002s Signed-off-by: -
Ryusuke Konishi authored
Add a new metadata file function, nilfs_mdt_find_block(), which finds an existent block on a metadata file in a given range of blocks. This function skips continuous hole blocks efficiently by using nilfs_bmap_seek_key(). Signed-off-by:
-
Ryusuke Konishi authored
Add a new bmap function, nilfs_bmap_seek_key(), which seeks a valid entry and returns its key starting from a given key. This function can be used to skip hole blocks efficiently. Signed-off-by:
-
Ryusuke Konishi authored
The type of key arguments in block mapping interface varies depending on function. For instance, nilfs_bmap_lookup_at_level() takes "__u64" for its key argument whereas nilfs_bmap_lookup() takes "unsigned long". This fits them to "__u64" to eliminate the variation. Signed-off-by:
-
Ryusuke Konishi authored
Simplify nilfs_mdt_bgl_lock() by utilizing bgl_lock_ptr() helper in <linux/blockgroup_lock.h>. Signed-off-by:
-
Ryusuke Konishi authored
nilfs_forget_buffer(), nilfs_clear_dirty_page(), and nilfs_segctor_complete_write() are using a bunch of atomic bit operations against buffer state bitmap. This reduces the number of them by utilizing set_mask_bits() macro. Signed-off-by:
-
Ryusuke Konishi authored
The async write flag is introduced to nilfs2 in the commit 7f42ec39 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks"), but the flag only makes sense for data buffers and btree node buffers. It is not needed for segment summary buffers. This gets rid of the latter uses as part of refactoring of atomic bit operations on buffer state bitmap. Signed-off-by:
-
Fabian Frederick authored
See Documentation/CodingStyle Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Fabian Frederick authored
See Documenation/CodingStyle Signed-off-by:
-
Fabian Frederick authored
See Documentation/CodingStyle Signed-off-by:
-
Joe Perches authored
Neaten the logging a bit by adding #define pr_fmt Miscellanea: o Remove __FILE__/__func__ uses o Coalesce formats adding missing spaces o Align arguments o (rtc-cmos) Integrated 2 consecutive messages Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
-
Heiko Stübner authored
The hym8563 datasheet describes the clock output control-bit as "when set to logic 0, the square wave output is enable, when set to logic 1, the CLKOUT output is inhibited". But in reality the setting is exactly opposite. Before now, the clock output was not really used, but on the rk3288 soc this generated clock is used to supply the temperature sensor block and the swapped bit value prevented it from working. With the corrected value, the tsadc now reports correct values. Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
-
Krzysztof Kozlowski authored
s3c_rtc_gettime() already returns the result of rtc_valid_tm() on the obtained time so get rid of another call to rtc_valid_tm(). Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Lokesh Vutla authored
module_platform_driver_probe() prevents driver from requesting probe deferral. So using module_platform_drive() to support probe deferral. Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Acked-by:
-
Lokesh Vutla authored
RTC is present in AM43xx and DRA7xx also. Updating the Kconfig to depend on ARCH_OMAP or ARCH_DAVINCI Signed-off-by:
-
Lokesh Vutla authored
RTC module contains a kicker mechanism to prevent any spurious writes from changing the register values. This mechanism requires two MMR writes to the KICK0 and KICK1 registers with exact data values before the kicker lock mechanism is released. Currently the driver release the lock in the probe and leaves it enabled until the rtc driver removal. This eliminates the idea of preventing spurious writes when RTC driver is loaded. So implement rtc lock and unlock functions before and after register writes. This is as advised by Paul to implement lock and unlock functions in the driver and not to unlock and leave it in probe. The same discussion can be seen here: http://www.mail-archive.com/linux-omap%40vger.kernel.org/msg111588.htmlSigned-off-by:
-
Krzysztof Kozlowski authored
Initialize the device time (if it is wrong) before registering RTC device to fix following error message during rtc-s3c probe: [ 2.215414] rtc (null): read_time: fail to read [ 2.216322] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 Signed-off-by:
-
Aaro Koskinen authored
Use function name in the error log instead of __FILE__. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Aaro Koskinen authored
__rtc_read_time logs should be debug logs instead of error logs. For example, when the RTC clock is not set, it's not really useful to print a kernel error log every time someone tries to read the clock: ~ # hwclock -r [ 604.508263] rtc rtc0: read_time: fail to read hwclock: RTC_RD_TIME: Invalid argument If there's a real error, it's likely that lower level or higher level code will tell it anyway. Make these logs debug logs, and also print the error code for the read failure. Signed-off-by:
-
Aaro Koskinen authored
In some error cases RTC name is used before it is initialized: rtc-rs5c372 0-0032: clock needs to be set rtc-rs5c372 0-0032: rs5c372b found, 24hr, driver version 0.6 rtc (null): read_time: fail to read rtc-rs5c372 0-0032: rtc core: registered rtc-rs5c372 as rtc0 Fix by initializing the name early. Signed-off-by:
-
Krzysztof Kozlowski authored
The S2MPS13 RTC is almost the same as S2MPS14. The differences when updating alarm are: 1. Set WUDR+AUDR field instead of WUDR+RUDR. 2. Clear the AUDR field later (it is not auto-cleared). Signed-off-by:
-
Alexandre Belloni authored
I've noticed that most of the patches for the RTC subsystem are currently either taken directly by Andrew or going through another maintainer's tree, quite often without an Acked-by or Reviewed-by tag. I'd like to propose myself as the RTC subsystem co-maintainer, to mainly help Alessandro reviewing incoming patches and maintain a subsystem tree to avoid having the RTC patches going through trees when they have no particular dependencies. Signed-off-by:
-
Baruch Siach authored
Add driver for the RTC hardware block on the Conexant CX92755 SoC, from the Digicolor series of SoCs. Tested on the Equinox evaluation board for the CX92755 chip. [akpm@linux-foundation.org: build command arrays at compile-time] Signed-off-by:
Baruch Siach <baruch@tkos.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Baruch Siach authored
Add a device tree binding documentation to the Real Time Clock hardware block on the Conexant CX92755 SoC. The CX92755 is from the Digicolor SoCs series. Other SoCs in that series may share the same hardware block. Signed-off-by:
-
Heiko Stuebner authored
When the clock is disabled, do not return a rate of 0 but instead return the rate the clock will be running at after it gets enabled. This prevents problems when the core clock code is trying to determine a suitable rate, while the clock is still off. Signed-off-by:
-
Adam Ward authored
Signed-off-by:
Adam Ward <adam.ward.opensource@diasemi.com> Tested-by:
-
Adam Ward authored
Signed-off-by:
-
Adam Ward authored
The RTC is in a different clock domain so a quick read after write can retrieve a mangled value of the old/new values Signed-off-by:
-
Joshua Kinard authored
Fix two minor sparse warnings: CHECK drivers/rtc/rtc-ds1685.c drivers/rtc/rtc-ds1685.c:2178:1: warning: function 'ds1685_rtc_poweroff' with external linkage has definition drivers/rtc/rtc-ds1685.c:802:23: warning: Using plain integer as NULL pointer Fixes: aaaf5fbf ("rtc: add driver for DS1685 family of real time clocks") Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Signed-off-by:
-
Joshua Kinard authored
The rtc driver core now sets the platform_driver 'owner' property, so remove the assignment from the DS1685 driver. Fixes: aaaf5fbf: "rtc: add driver for DS1685 family of real time clocks" Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Krzysztof Kozlowski authored
The regmap_config struct may be const because it is not modified by the driver and regmap_init() accepts pointer to const. Signed-off-by:
-
Chanwoo Choi authored
The current functions in s3c-rtc driver execute clk_enable/disable() to control clocks and some functions execute s3c_rtc_alarm_clk_enable() unnecessarily. So this patch deletes the duplicate clock control and spilts s3c_rtc_alarm_clk_enable() out as s3c_rtc_enable_clk()/s3c_rtc_disable_clk() to improve readability. Signed-off-by:
-
Floris Bos authored
When using device trees on the ARM platform, it is not certain at compile time whether or not the system will have a RTC. If one enables CONFIG_HCTOSYS just in case the system booted has a RTC, and it turns out not to be, this will result in a big fat "unable to open rtc device" error being printed to console, even when "quiet" is set in the kernel cmdline. Fix this by outputting the message with loglevel info instead. Signed-off-by:
Floris Bos <bos@je-eigen-domein.nl> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Martin Kepplinger authored
Despite its name, sign_extend32() is safe to use for 8 bit types too. (See https://lkml.org/lkml/2015/1/18/289). Signed-off-by:
Martin Kepplinger <martink@posteo.de> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Peter Robinson authored
Set the of_match_table for this driver so that devices can be described in the device tree. This device is used in the Trimslice and is already defined in the Trimslice device tree. Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by:
-
