- 22 May, 2020 11 commits
-
-
Ben Skeggs authored
Signed-off-by:Ben Skeggs <bskeggs@redhat.com>
-
James Jones authored
Allow setting the block layout of a nouveau FB object using DRM format modifiers. When specified, the format modifier block layout and kind overrides the GEM buffer's implicit layout and kind. The specified format modifier is validated against the list of modifiers supported by the target display hardware. v2: Used Tesla family instead of NV50 chipset compare v4: Do not cache kind, tile_mode in nouveau_framebuffer v5: Resolved against nouveau_framebuffer cleanup Signed-off-by:
James Jones <jajones@nvidia.com> Signed-off-by:
-
James Jones authored
Make sure framebuffer dimensions and tiling parameters will not result in accesses beyond the end of the GEM buffer they are bound to. v3: Return EINVAL when creating FB against BO with unsupported tiling v5: Resolved against nouveau_framebuffer cleanup Signed-off-by: -
James Jones authored
Advertise support for the full list of format modifiers supported by each class of NVIDIA desktop GPU display hardware. Stash the array of modifiers in the nouveau_display struct for use when validating userspace framebuffer creation requests, which will be supportd in a subsequent change. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by: -
Thomas Zimmermann authored
After its cleanup, struct nouveau_framebuffer is only a wrapper around struct drm_framebuffer. Use the latter directly. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Thomas Zimmermann authored
The buffer object stored in nvbo is also available GEM object in obj[0] of struct drm_framebuffer. Therefore remove nvbo in favor obj[0] and replace all references accordingly. This may require an additional cast. With this change we can already replace nouveau_user_framebuffer_destroy() and nouveau_user_framebuffer_create_handle() with generic GEM helpers. Calls to nouveau_framebuffer_new() receive a GEM object. Signed-off-by:
-
Thomas Zimmermann authored
The vma field of struct nouveau_framebuffer is a special field for the the accelerated fbdev console. Hence there's at most one single instance for the active console. Moving it into struct nouveau_fbdev makes struct nouveau_framebuffer slightly smaller and brings it closer to struct drm_framebuffer. Signed-off-by:
-
Thomas Zimmermann authored
Signed-off-by:
-
Ben Skeggs authored
The $(srctree) addition a while back busted building the out-of-tree version of the module, and I've been hacking it up ever since. This allows us to work around the issue. Signed-off-by: -
James Jones authored
Builds upon the existing NVIDIA 16Bx2 block linear format modifiers by adding more "fields" to the existing parameterized DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK format modifier macro that allow fully defining a unique-across- all-NVIDIA-hardware bit layout using a minimal set of fields and values. The new modifier macro DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D is effectively backwards compatible with the existing macro, introducing a superset of the previously definable format modifiers. Backwards compatibility has two quirks. First, the zero value for the "kind" field, which is implied by the DRM_FORMAT_MOD_NVIDIA_16BX2_BLOCK macro, must be special cased in drivers and assumed to map to the pre-Turing generic kind of 0xfe, since a kind of "zero" is reserved for linear buffer layouts on all GPUs. Second, it is assumed backwards compatibility is only needed when running on Tegra GPUs, and specifically Tegra GPUs prior to Xavier. This is based on two assertions: -Tegra GPUs prior to Xavier used a slightly different raw bit layout than desktop GPUs, making it impossible to directly share block linear buffers between the two. -Support for the existing block linear modifiers was incomplete, making them useful only for exporting buffers created by nouveau and importing them to Tegra DRM as framebuffers for scan out. There was no support for adding framebuffers using format modifiers in nouveau, nor importing dma-buf/PRIME GEM objects into nouveau userspace drivers with modifiers in Mesa. Hence it is assumed the prior modifiers were not intended for use on desktop GPUs, and as a corollary, were not intended to support sharing block linear buffers across two different NVIDIA GPUs. v2: - Added canonicalize helper function v3: - Added additional bit to compression field to support Tesla (NV5x,G8x,G9x,GT1xx,GT2xx) class chips. Signed-off-by:
-
- 21 May, 2020 2 commits
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2020-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-next Fix for TypeC power domain toggling on resets (Cc: stable). Two compile time warning fixes. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200520123227.GA21104@jlahtine-desk.ger.corp.intel.com
-
Dave Airlie authored
Merge tag 'exynos-drm-next-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Check imported buffer mapping in generic way - This patch reworks exynos_drm_gem_prime_import_sg_table function, which checks if the imported buffer has been mapped as contiguous or not in generic way, and flag a exynos gem buffer type properly according to the mapped way. Fixups - Drop a reference count to in_bridge_node correctly. - Enable the runtime power management correctly. . The runtime pm should be enabled before calling compont_add(). Cleanups - Do not register "by hand" a sysfs file, and use dev_groups instead. - Drop internal 'pages' array which aren't needed. - Remove dead-code. - Correct type casting. - Drop unnecessary error messages. Signed-off-by:
-
- 20 May, 2020 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
UAPI Changes: - drm/i915: Show per-engine default property values in sysfs By providing the default values configured into the kernel via sysfs, it is much more convenient for userspace to restore those sane defaults, or at least know what are considered good baseline. This is useful, for example, to cleanup after any failed userspace prior to commencing new jobs. Cross-subsystem Changes: - video/hdmi: Add Unpack only function for DRM infoframe - Includes pull request gvt-next-2020-05-12 Driver Changes: - Restore Cherryview back to full-ppgtt (Chris, Mika) - Document locking guidelines for i915 (Chris, Daniel, Joonas) - Fix GitLab #1746: Handle idling during i915_gem_evict_something busy loops (Chris) - Display WA #1105: Require linear fb stride to be multiple of 512 bytes on gen9/glk (Ville) - Add Wa_14010685332 for ICP/ICL (Matt R) - Restrict w/a 1607087056 for EHL/JSL (Swathi) - Fix interrupt handling for DP AUX transactions on Tigerlake (Imre) - Revert "drm/i915/tgl: Include ro parts of l3 to invalidate" (Mika) - Fix HDC pipeline flush hardware bit on Gen12 (Mika) - Flush L3 when flushing render on Gen12 (Mika) - Invalidate aux table entries forcibly between BB on Gen12 (Mika) - Add aux table invalidate for all engines on Gen12 (Mika) - Force pte cacheline to main memory Gen8+ (Mika) - Add and enable TGL+ SAGV support (Stanislav) - Implement vm_ops->access on i915 mmaps for GDB (Chris, Kristian) - Replace zero-length array with flexible-array (Gustavo) - Improve batch buffer pool effectiveness to mitigate soft-rc6 hit (Chris) - Remove wait priority boosting (Chris) - Keep driver module referenced when PMU is active (Chris) - Sanitize RPS interrupts upon resume (Chris) - Extend pcode read timeout to 20 ms (Chris) - Wait for ACT sent before enabling MST pipe (Ville) - Extend support to async relocations to SNB (Chris) - Remove CNL pre-prod workarounds (Ville) - Don't enable WaIncreaseLatencyIPCEnabled when IPC is disabled (Sultan) - Record the active CCID from before reset (Chris) - Mark concurrent submissions with a weak-dependency (Chris) - Peel dma-fence-chains for await to allow engine-to-engine sync (Lionel) - Prevent using semaphores to chain up to external fences (Chris) - Fix GLK watermark calculations (Ville) - Emit await(batch) before MI_BB_START (Chris) - Reset execlists registers before HWSP (Chris) - Drop no-semaphore boosting in favor of fast timeslicing (Chris) - Fix enabled infoframe states of lspcon (Gwan-gyeong) - Program DP SDPs on pipe updates (Gwan-gyeong) - Stop sending DP SDPs on ddi disable (Gwan-gyeong) - Store CS timestamp frequency in Hz (Ville) - Remove unused HAS_FWTABLE macro (Pascal) - Use batchbuffer chaining for relocations to save ring space (Chris) - Try different engines for relocs if MI ops not supported (Chris, Tvrtko) - Lazily acquire the device wakeref for freeing objects (Chris) - Streamline display code arithmetics around rounding etc. (Ville) - Use bw state for per crtc SAGV evaluation (Stanislav) - Track active_pipes in bw_state (Stanislav) - Nuke mode.vrefresh usage (Ville) - Warn if the FBC is still writing to stolen on removal (Chris) - Added new PCode commands prepping for QGV rescricting (Stansilav) - Stop holding onto the pinned_default_state (Chris) - Propagate error from completed fences (Chris) - Ignore submit-fences on the same timeline (Chris) - Pull waiting on an external dma-fence into its routine (Chris) - Replace the hardcoded I915_FENCE_TIMEOUT with Kconfig (Chris) - Mark up the racy read of execlists->context_tag (Chris) - Tidy up the return handling for completed dma-fences (Chris) - Introduce skl_plane_wm_level accessor (Stanislav) - Extract SKL SAGV checking (Stanislav) - Make active_pipes check skl specific (Stanislav) - Suspend tasklets before resume sanitization (Chris) - Remove redundant exec_fence (Chris) - Mark the addition of the initial-breadcrumb in the request (Chris) - Transfer old virtual breadcrumbs to irq_worker (Chris) - Read the DP SDPs from the video DIP (Gwan-gyeong) - Program DP SDPs with computed configs (Gwan-gyeong) - Add state readout for DP VSC and DP HDR Metadata Infoframe SDP (Gwan-gyeong) - Add compute routine for DP PSR VSC SDP (Gwan-gyeong) - Use new DP VSC SDP compute routine on PSR (Gwan-gyeong) - Restrict qgv points which don't have enough bandwidth. (Stanislav) - Nuke pointless div by 64bit (Ville) - Static checker code fixes (Nathan, Mika, Chris) - Add logging function for DP VSC SDP (Gwan-gyeong) - Include HDMI DRM infoframe, DP HDR metadata and DP VSC SDP in the crtc state dump (Gwan-gyeong) - Make timeslicing explicit engine property (Chris, Tvrtko) - Selftest and debugging improvements (Chris) - Align variable names with BSpec (Ville) - Tidy up gen8+ breadcrumb emission code (Chris) - Turn intel_digital_port_connected() in a vfunc (Ville) - Use stashed away hpd isr bits in intel_digital_port_connected() (Ville) - Extract i915_cs_timestamp_{ns_to_ticks,tick_to_ns}() (Ville) Signed-off-by: -
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
amd-drm-next-5.8-2020-05-19: amdgpu: - Improved handling for CTF (Critical Thermal Fault) situations - Clarify AC/DC mode switches - SR-IOV fixes - XGMI fixes for RAS - Misc cleanups - Add autodump debugfs node to aid in GPU hang debugging UAPI: - Add a MEM_SYNC IB flag for handling proper acquire memory semantics if UMDs expect the kernel to handle this Used by AMDVLK: https://github.com/GPUOpen-Drivers/pal/blob/dev/src/core/os/amdgpu/amdgpuQueue.cpp#L1262Signed-off-by:
-
- 19 May, 2020 3 commits
-
-
Imre Deak authored
Make sure to select the port's AUX power domain while holding the TC port lock. The domain depends on the port's current TC mode, which may get changed under us if we're not holding the lock. This was left out from commit 8c10e226 ("drm/i915: Keep the TypeC port mode fixed for detect/AUX transfers") Cc: <stable@vger.kernel.org> # v5.4+ Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200514204553.27193-1-imre.deak@intel.com (cherry picked from commit ae9b6cfe) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Nathan Chancellor authored
When CONFIG_DRM_I915_DEBUG_GEM is not set, clang warns: drivers/gpu/drm/i915/gvt/scheduler.c:884:1: warning: function 'check_shadow_context_ppgtt' is not needed and will not be emitted [-Wunneeded-internal-declaration] check_shadow_context_ppgtt(struct execlist_ring_context *c, struct intel_vgpu_mm *m) ^ 1 warning generated. This warning is similar to -Wunused-function but rather than warning that the function is completely unused, it warns that it is used in some expression within the file but that expression will be evaluated to a constant or be optimized away in the final assembly, essentially making it appeared used but really isn't. Usually, this happens when a function or variable is only used in sizeof, where it will appear to be used but will be evaluated at compile time and not be required to be emitted. In this case, the function is only used in GEM_BUG_ON, which is defined as BUILD_BUG_ON_INVALID, which intentionally follows this pattern. To fix this warning, add __maybe_unused to make it clear that this is intentional depending on the configuration. Fixes: bec3df93 ("drm/i915/gvt: Support PPGTT table load command") Link: https://github.com/ClangBuiltLinux/linux/issues/1027Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Arnd Bergmann authored
After the function is no longer marked 'inline', there is now a new warning pointing out that the only caller is inside of an #ifdef: drivers/gpu/drm/i915/display/intel_panel.c:493:12: warning: 'scale_user_to_hw' defined but not used [-Wunused-function] 493 | static u32 scale_user_to_hw(struct intel_connector *connector, | ^~~~~~~~~~~~~~~~ Move the function itself into that #ifdef as well. Fixes: 81b55ef1 ("drm/i915: drop a bunch of superfluous inlines") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
- 18 May, 2020 15 commits
-
-
Andrey Grodzovsky authored
When this flag is set in the CS IB flags, it causes a memory cache flush of the GFX. v2: Move new flag to drm_amdgpu_cs_chunk_ib.flags Bump up UAPI version Remove condition on job != null to emit mem_sync Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Marek Olšák authored
Compute IBs need this too. v2: split out version bump v3: squash in emit frame count fixes Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Andrey Grodzovsky authored
Implement the .mem_sync hook defined earlier. v2: Rename functions Signed-off-by:
-
Andrey Grodzovsky authored
Used to flush and invalidate various caches. v2: Rename function hook Signed-off-by:
-
Kevin Wang authored
unified amdgpu device attribute node functions: 1. add some helper functions to create amdgpu device attribute node. 2. create device node according to device attr flags on different VF mode. 3. rename some functions name to adapt a new interface. v2: 1. remove ATTR_STATE_DEAD, ATTR_STATE_ALIVE enum. 2. rename callback function perform to attr_update. 3. modify some variable names Signed-off-by:
Kevin Wang <kevin1.wang@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Kevin Wang authored
the swsmu or powerplay(hwmgr) need to handle task according to different VF mode, this function to help query vf mode. vf mode: 1. SRIOV_VF_MODE_BARE_METAL: the driver work on host OS (PF) 2. SRIOV_VF_MODE_ONE_VF : the driver work on guest OS with one VF 3. SRIOV_VF_MODE_MULTI_VF : the driver work on guest OS with multi VF Signed-off-by:
-
Jiange Zhao authored
When GPU got timeout, it would notify an interested part of an opportunity to dump info before actual GPU reset. A usermode app would open 'autodump' node under debugfs system and poll() for readable/writable. When a GPU reset is due, amdgpu would notify usermode app through wait_queue_head and give it 10 minutes to dump info. After usermode app has done its work, this 'autodump' node is closed. On node closure, amdgpu gets to know the dump is done through the completion that is triggered in release(). There is no write or read callback because necessary info can be obtained through dmesg and umr. Messages back and forth between usermode app and amdgpu are unnecessary. v2: (1) changed 'registered' to 'app_listening' (2) add a mutex in open() to prevent race condition v3 (chk): grab the reset lock to avoid race in autodump_open, rename debugfs file to amdgpu_autodump, provide autodump_read as well, style and code cleanups v4: add 'bool app_listening' to differentiate situations, so that the node can be reopened; also, there is no need to wait for completion when no app is waiting for a dump. v5: change 'bool app_listening' to 'enum amdgpu_autodump_state' add 'app_state_mutex' for race conditions: (1)Only 1 user can open this file node (2)wait_dump() can only take effect after poll() executed. (3)eliminated the race condition between release() and wait_dump() v6: removed 'enum amdgpu_autodump_state' and 'app_state_mutex' removed state checking in amdgpu_debugfs_wait_dump Improve on top of version 3 so that the node can be reopened. v7: move reinit_completion into open() so that only one user can open it. v8: remove complete_all() from amdgpu_debugfs_wait_dump(). Signed-off-by:Jiange Zhao <Jiange.Zhao@amd.com> Reviewed-by:
-
Emil Velikov authored
Platform drivers now have the option to have the platform core create and remove any needed sysfs attribute files. So take advantage of that and do not register "by hand" a sysfs file. Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Christophe JAILLET authored
'exynos_dsi_parse_dt()' takes a reference to 'dsi->in_bridge_node'. This must be released in the error handling path. In order to do that, add an error handling path and move the 'exynos_dsi_parse_dt()' call from the beginning to the end of the probe function to ease the error handling path. This function only sets some variables which are used only in the 'transfer' function. The call chain is: .transfer --> exynos_dsi_host_transfer --> exynos_dsi_init --> exynos_dsi_enable_clock (use burst_clk_rate and esc_clk_rate) --> exynos_dsi_set_pll (use pll_clk_rate) While at it, also handle cases where 'component_add()' fails. This patch is similar to commit 70505c2e ("drm/exynos: dsi: Remove bridge node reference in removal") which fixed the issue in the remove function. Signed-off-by:Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Marek Szyprowski authored
Runtime power management is essential for the Exynos Mixer driver operation. It should be enabled before adding its DRM component, because in some cases (when deferred probe takes place due to the IOMMU availability) the DRM driver might be initialized directly from the Mixer's component_add() call, what results in starting the driver operation without enabling the runtime power management. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Bernard Zhao authored
Maybe keep pointer which points to global const string data in const type is better, make sure not change const data. Signed-off-by:
Bernard Zhao <bernard@vivo.com> Signed-off-by:
-
Marek Szyprowski authored
Internal pages array and scatter-list for them is not really needed for anything. FBDev emulation can simply rely on the DMA-mapping framework to create a proper kernel mapping for the buffer, while all other buffer use cases don't really need that array at all. Suggested-by:
-
Marek Szyprowski authored
Explicitly check if the imported buffer has been mapped as contiguous in the DMA address space, what is required by all Exynos DRM CRTC drivers. While touching this, set buffer flags depending on the availability of the IOMMU. Signed-off-by:
-
Marek Szyprowski authored
The ExynosDRM page fault handler is never used, drm_gem_mmap() always calls exynos_drm_gem_mmap() function, which perform complete mapping for the given virtual address-space area. Signed-off-by:
-
Markus Elfring authored
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
- 15 May, 2020 2 commits
-
-
Joonas Lahtinen authored
Signed-off-by: -
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for 5.8: UAPI Changes: Cross-subsystem Changes: * dma-buf: use atomic64_fetch_add() for context id * Documentation: document bindings for ASUS ZOOT TM5P5, BOE NV133FHM-N62, hpd-gpios Core Changes: Driver Changes: * drm/ast: fix supend; cleanups * drm/i2c: cleanups * drm/panel: add MODULE_LICENSE to panel-visinox-rm69299; add support for ASUS TM5P5i, BOE NV133FHM-N62i; fix size and bpp of BOE NV133FHM-N61 add hpd-gpio to panel-simple * drm/mcde: fix return value check in mcde_dsi_bind() * drm/mgag200: use managed drmm_mode_config_init(); cleanups * fbdev/pxa168fb: cleanups Signed-off-by:
-
- 14 May, 2020 5 commits
-
-
John Clements authored
Updated SMC FW version check to determine if XGMI power down control is supported Reviewed-by:
John Clements <john.clements@amd.com> Signed-off-by:
-
John Clements authored
Disable XGMI link power down prior to issuing a XGMI RAS error Reviewed-by:
-
John Clements authored
Reviewed-by:
-
John Clements authored
Added host to SMU FW cmd to enable/disable XGMI link power down Reviewed-by:
-
Colin Ian King authored
The variable ret is being initializeed with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
