- 29 Oct, 2019 4 commits
-
-
Cheng-Yi Chiang authored
Add one optional property "rockchip,hdmi-codec" to let user specify HDMI device node in DTS so machine driver can find hdmi-codec device node for HDMI codec DAI. Use the presence of rockchip,audio-codec and rockchip,hdmi-codec to specify the use case. Use max98090 only : specify rockchip,audio-codec. Use HDMI only: specify rockchip,hdmi-codec. Use both max98090 and HDMI: specify rockchip,audio-codec and rockchip,hdmi-codec. Move these properties to optional because they are not needed for HDMI-only use case. "rockchip,audio-codec": The phandle of the MAX98090 audio codec "rockchip,headset-codec": The phandle of Ext chip for jack detection Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20191028071930.145899-3-cychiang@chromium.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Cheng-Yi Chiang authored
Allow codec driver register callback function for plug event. The callback registration flow: dw-hdmi <--- hw-hdmi-i2s-audio <--- hdmi-codec dw-hdmi-i2s-audio implements hook_plugged_cb op so codec driver can register the callback. dw-hdmi exports a function dw_hdmi_set_plugged_cb so platform device can register the callback. When connector plug/unplug event happens, report this event using the callback. Make sure that audio and drm are using the single source of truth for connector status. Signed-off-by:
-
Jaroslav Kysela authored
Appearently the CONFIG_SND_SOC_SOF_KABYLAKE and CONFIG_SND_SOC_SOF_SKYLAKE options are not present in Kconfig and 'struct snd_sof_dsp_ops sof_skl_ops' is not declared in the code, too. Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20191028173329.29538-1-perex@perex.czSigned-off-by:
-
Jaroslav Kysela authored
Those strings are exposed to the user space as the card name thus used in the GUIs. The common standard is to avoid '_' here. The worst case is 'sof-skl_hda_card' string. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191028164624.14334-1-perex@perex.czSigned-off-by:
-
- 28 Oct, 2019 32 commits
-
-
Keyon Jie authored
Use the new implemented snd_sof_prepare() and snd_sof_complete() as the power management callbacks for pci probing platforms. Signed-off-by:
Keyon Jie <yang.jie@linux.intel.com> Signed-off-by:
-
Keyon Jie authored
When system is entering into S0ix, the PCI device may transition to the D0i3 substate instead of D3. In D0i3, some always-on functionality can be enabled, such as acoustic event detection, voice activity detection or hotwording. When an event is detected, the DSP firmware can wake-up the device for a transition to D0 with an interrupt. Signed-off-by:
-
Keyon Jie authored
No set_power_state ops means that the platform doesn't support D0i3, return -ENOTSUPP for the case. Signed-off-by:
-
Keyon Jie authored
Enable system wake up via IPC interrupt from DSP when the system is suspending to the S0ix state, and disable it in the corresponding resuming. Signed-off-by:
-
Keyon Jie authored
During system suspend, the PM framework will freeze all applications and the ALSA/ASoC core will suspend all RUNNING PCM streams. However, D0ix-compatible PCM streams should keep the related pipelines active in the DSP when the system is entering S0ix. The TRIGGER_SUSPEND event is trapped in such cases to prevent the pipelines from being stopped. Likewise, the TRIGGER_RESUME/START events should not affect the pipeline state. The SOF driver also triggers some DSP Firmware pipelines based on the DAPM widgets power events. In such cases, we also ignore PRE_PMU and POST_PMD events to keep the pipelines active. Signed-off-by:
-
Keyon Jie authored
Implement the prepare() and complete() callbacks for power management, initialize s0_suspend flag at prepare(), and reset it at complete(). Signed-off-by:
-
Keyon Jie authored
Add a suspend_ignored flag to snd_sof_pcm_stream that will be used to decide if the corresponding FW pipeline should be kept active to perform always on tasks when the system is entering the S0ix state. Signed-off-by:
-
Keyon Jie authored
Add flag 's0_suspend' to indicate if the system is entering S0ix or not. Signed-off-by:
-
Keyon Jie authored
For compact IPCs, we will send the IPC header/command via the HIPCIDR register and the first 32bit payload via the HIPCIDD register, no mailbox will be used. Signed-off-by:
-
Keyon Jie authored
Add snd_sof_set_d0_substate() helper for setting ADSP to a specific D0 substate, it will call into the platform specific implementation, and update the d0_substate at success. Signed-off-by:
-
Keyon Jie authored
The configuration for D0ix in FW is platform specific, let's do this and send IPC in the platform set_power_state() ops. Signed-off-by:
-
Keyon Jie authored
On cAVS platforms, some IPCs are required to be sent via IPC registers only(e.g. when in D0i3, mailbox is unaccessible), add hda-ipc.h to hold definition of those compact IPCs. Signed-off-by:
-
Keyon Jie authored
Memory windows could be powered off before receiving PM_GATE IPC reply from FW, we can't read the mailbox to get reply. Signed-off-by:
-
Keyon Jie authored
Add new ipc messages which will be sent from driver to FW, to ask FW to enter specific power saving state. Signed-off-by:
-
Keyon Jie authored
The helper sof_send_pm_ipc() is only suitable for context save/restore IPCs' sending, so rename it to sof_send_pm_ctx_ipc here. Signed-off-by:
-
Keyon Jie authored
Define macro and use it for the register polling retry count. Signed-off-by:
-
Keyon Jie authored
Align the logs for CIP timeout at D0I3C.I3 updating. Signed-off-by:
-
Keyon Jie authored
Parses the token from tplg file and store it to snd_sof_pcm_stream d0i3_compatible flag, which can be used later for d0ix transition management. Signed-off-by:
-
Keyon Jie authored
Add stream token SOF_TKN_STREAM_PLAYBACK_COMPATIBLE_D0I3 and SOF_TKN_STREAM_CAPTURE_COMPATIBLE_D0I3 to denote if the stream can be opened at low power d0i3 status or not. Signed-off-by:
-
Keyon Jie authored
Add flag d0i3_compatible to struct snd_sof_pcm_stream to denote if the stream can tolerate a transition to the D0i3 substate while opened (thus seen as 'active' by pm_runtime). Signed-off-by:
-
Keyon Jie authored
Using hda_dsp_set_power_state() as set_power_state() ops for apl to do d0ix platform configuration updates. Signed-off-by:
-
Keyon Jie authored
Using hda_dsp_set_power_state() as set_power_state() ops for cnl to do d0ix platform configuration updates. Signed-off-by:
-
Keyon Jie authored
Adding helper to implement setting dsp to d0i3 or d0i0 status, this will be needed for driver D0ix support. Signed-off-by:
-
Keyon Jie authored
D0i3 is a platform-defined substate of D0, so we need a platform-specific callback in dsp_ops to handle the relevant configurations. Signed-off-by:
-
Keyon Jie authored
We initialize/reset d0_substate to default d0i0 value when doing transition D3-->D0, e.g. at success of probing and resuming. Signed-off-by:
-
Keyon Jie authored
Add field d0_substate to struct snd_sof_dev to store the current DSP D0 sub-state(only meaningful when DSP in D0), which could be D0I0 or D0I3. Signed-off-by:
-
Kuninori Morimoto authored
chan > 8 or chan < 0 shouldn't happen. This patch uses WARN_ON() for such case. Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87y2x530a4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Shengjiu Wang authored
xrun may happen at the end of stream, the trigger->fsl_esai_trigger_stop maybe called in the middle of fsl_esai_hw_reset, this may cause esai in wrong state after stop, and there may be endless xrun interrupt. This issue may also happen with trigger->fsl_esai_trigger_start. So Add spin lock to lock those functions. Fixes: 7ccafa2b ("ASoC: fsl_esai: recover the channel swap after xrun") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/52e92c4221a83e39a84a6cd92fc3d5479b44894c.1572252321.git.shengjiu.wang@nxp.comSigned-off-by:
-
Shengjiu Wang authored
The output divider should align with the output sample rate, if use ideal sample rate, there will be a lot of overload, which would cause underrun. The maximum divider of asrc clock is 1024, but there is no judgement for this limitation in driver, which may cause the divider setting not correct. For non-ideal ratio mode, the clock rate should divide the sample rate with no remainder, and the quotient should be less than 1024. Signed-off-by:
-
Brent Lu authored
The first DMIC capture always fail (zero sequence data from PCM port) after using DSP hotwording function (i.e. Google assistant). This rt5514 codec requires to control mclk directly in the set_bias_level function. Implement this function in machine driver to control the ssp1_mclk clock explicitly could fix this issue. Signed-off-by:
Brent Lu <brent.lu@intel.com> Reviewed-by:
-
YueHaibing authored
remove unneeded semicolon. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191025120801.16236-1-yuehaibing@huawei.comSigned-off-by:
-
Michael Ellerman authored
Commit 4ac85de9 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") removed fsl_dma_ops but left a usage, leading to a build error for some configs, eg. mpc85xx_defconfig: sound/soc/fsl/fsl_dma.c: In function ‘fsl_soc_dma_probe’: sound/soc/fsl/fsl_dma.c:905:18: error: ‘fsl_dma_ops’ undeclared (first use in this function) dma->dai.ops = &fsl_dma_ops; ^~~~~~~~~~~ Remove the usage to fix the build. Fixes: 4ac85de9 ("ASoC: fsl: fsl_dma: remove snd_pcm_ops") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20191025051353.2878-1-mpe@ellerman.id.auSigned-off-by:
-
- 25 Oct, 2019 4 commits
-
-
Pierre-Louis Bossart authored
The current position update is not precise enough for PulseAudio to work reliably with the timer-based scheduling on Baytrail, Cherrytrail, Broadwell. Disable the NO_PERIOD_WAKEUP capability and use BATCH to signal that the position is only reliable and updated during period_elapsed events. This will be reverted when the firmware provides a more accurate position for those platforms. Reviewed-by:
Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Currently the INFO_ flags such as PAUSE/NO_PERIOD_WAKEUP are defined in the SOF PCM core, which doesn't scale. To account for platform variations, these flags need to be set in DSP ops. This patch only moves the definitions and does not change any functionality. Reviewed-by:
-
Ben Dooks authored
We see odd FIFO overruns with this, we assume the best thing to do is to disable the RX I2S frontend first, and then disable the FIFO that is using it. This also fixes an issue where using multi-word frames (TDM) have partial samples stuck in the FIFO which then get read out when the next capture is started. Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Acked-by:
Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20191018154833.7560-5-ben.dooks@codethink.co.ukSigned-off-by:
-
Edward Cragg authored
Add a callback to configure TDM settings for the Tegra30 I2S ASoC 'platform' driver. Signed-off-by:
Edward Cragg <edward.cragg@codethink.co.uk> [ben.dooks@codethink.co.uk: merge fix for power management] [ben.dooks@codethink.co.uk: add review change for fsync of 1 clock] Signed-off-by:
-
