- 15 Sep, 2010 11 commits
-
-
Matt Carlson authored
It was recently discovered that enabling TSS can lockup the device. This patch disables the feature until a suitable workaround can be found. Signed-off-by:
Matt Carlson <mcarlson@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Matt Carlson authored
Earlier versions of tg3 devices had a problem where the read DMA FIFO could be overrun in certain edge conditions. The fix was to limit the number of rx BDs the hardware would fetch at a time. For later devices (5761, 5784 and later ASIC revs), there is a hardware fix that must be enabled to fix the same problem. This patch adds that hardware fix. There is a gap in the ASIC revision lineage where neither fix is applied. This is intentional as these ASIC revisions are not afflicted by the bug. Reviewed-by:
Benjamin Li <benli@broadcom.com> Reviewed-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
andrew hendry authored
Connect already has socket locking. Signed-off-by:
Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by:
-
Andrew Hendry authored
Accept already has socket locking. [ Extend socket locking over TCP_LISTEN state test. -DaveM ] Signed-off-by:
-
andrew hendry authored
Accept updates socket values in 3 lines so wrapped with lock_sock. Signed-off-by:
-
andrew hendry authored
Listen updates socket values and needs lock_sock. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
- 14 Sep, 2010 11 commits
-
-
Jean Delvare authored
The code is quite convoluted, simplify it. This also avoids calling e1000_request_irq() without testing the value it returned, which was bad. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Dmitry Kravkov authored
Default number of rx buffers will be divided equally between allocated queues. This will decrease amount of pre-allocated buffers on systems with multiple CPUs. User can override this behavior with ethtool -G. Minimum amount of rx buffers per queue set to 128. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Ondrej Zary authored
Empty received URBs are currently counted as errors but the device sends them sometimes as part of regular traffic - so remove this check. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ondrej Zary authored
Fix that usb_string() return value is not checked for error (negative value). Also change the ignore message a bit and lower its level to info. Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
Andreas Schwab authored
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Andreas Schwab authored
Modifying an object twice without an intervening sequence point is undefined. Signed-off-by:
-
Denis Kirjanov authored
This patch to adds support for PM hooks into sundance driver Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
Eric Dumazet authored
Allocate hash tables for every online cpus, not every possible ones. NUMA aware allocations. Dont use a full page on arches where PAGE_SIZE > 1024*sizeof(void *) misc: __percpu , __read_mostly, __cpuinit annotations flow_compare_t is just an "unsigned long" Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
- 12 Sep, 2010 1 commit
-
-
David S. Miller authored
Reported-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
- 10 Sep, 2010 17 commits
-
-
stephen hemminger authored
Now that est_tree_lock is acquired with BH protection, the other call is unnecessary. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Eric Dumazet authored
Use rcu_dereference_rtnl() helper Change hard coded constants in fib_flag_trans() 7 -> RTN_UNREACHABLE 8 -> RTN_PROHIBIT Signed-off-by:
-
Ben Hutchings authored
This requires some reorganisation of channel setup and teardown to ensure that we can always roll-back a failed change. Based on work by Steve Hodgson <shodgson@solarflare.com> Signed-off-by:
-
Steve Hodgson authored
- Allow the ring size to be specified in non power-of-two sizes (for instance to limit the amount of receive buffers). - Automatically size the event queue. Signed-off-by:
-
Ben Hutchings authored
This will allow for reallocation of channel structures and rings. Change module parameter separate_tx_channels to be read-only, since we now require its value to be constant. Signed-off-by:
-
Ben Hutchings authored
In preparation for changes to the way channels and queue structures are allocated, revise the macros and functions used to look up and iterator over them. - Replace efx_for_each_tx_queue() with iteration over channels then TX queues - Replace efx_for_each_rx_queue() with iteration over channels then RX queues (with one exception, shortly to be removed) - Introduce efx_get_{channel,rx_queue,tx_queue}() functions to look up channels and queues by index - Introduce efx_channel_get_{rx,tx}_queue() functions to look up a channel's queues Signed-off-by: -
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Currently we allocate DMA descriptor rings and event rings using pci_alloc_consistent() which selects non-blocking behaviour from the page allocator (GFP_ATOMIC). This is unnecessary, and since we currently allocate a single contiguous block for each ring (up to 32 pages!) these allocations are likely to fail if there is any significant memory pressure. Use dma_alloc_coherent() and GFP_KERNEL instead. Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
-
Ben Hutchings authored
rx_over_errors appears to be intended as a count of packets that overflow a packet buffer in the NIC. Given that we implement a cut-through receive path, this should always be 0. rx_dropped appears to be the correct counter for packets dropped due to lack of host buffers. Signed-off-by:
-
Ben Hutchings authored
Calculating rx_bad as rx_packets - rx_good is unnecessary and incorrect, since rx_good does not include control frames (e.g. pause frames) and rx_packets does. Signed-off-by:
-
David S. Miller authored
Conflicts: net/mac80211/main.c
-
-
Nikitas Angelinas authored
Replace sizeof(bnx2x_parity_mask)/(sizeof(bnx2x_parity_mask[0]) with ARRAY_SIZE(bnx2x_parity_mask) in drivers/net/bnx2x/bnx2x_main.c Signed-off-by:
Nikitas Angelinas <nikitasangelinas@gmail.com> Signed-off-by:
-
Dan Williams authored
The 'wwan' devtype is meant for devices that require preconfiguration and *every* time setup before the ethernet interface can be used, like cellular modems which require a series of setup commands on serial ports or other mechanisms before the ethernet interface will handle packets. As ipheth only requires one-per-hotplug pairing setup with no preconfiguration (like APN, phone #, etc) and the network interface is usable at any time after that initial setup, remove the incorrect devtype wwan. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Joe Perches authored
Signed-off-by:
-
