- 31 Jan, 2017 15 commits
-
-
Tomas Winkler authored
Specify in function names by which object is the io list filtered: cl for a client and fp for file descriptor. In that course a code duplication is resolved by dropping mei_cl_read_cb_flush and mei_clear_list and using mei_io_list_free_fp function. Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Usyskin authored
mei_dev structure used struct mei_cl_cb type variables as for holding callbacks list heads. Replace them by the actual struct list_head as there is no other info that is handled. This slims down the mei_dev structure and mostly streamline the code. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Tomas Winkler authored
The amthif client connection is shared over multiple file descriptors. In case a file descriptor was closed immediately after a write, the read credits should be still available so the pending reads can be cleaned from the queue, hence we cannot drop the control read list, this is done only upon connection close. Signed-off-by:
-
Tomas Winkler authored
In order to prevent memory leak clean up the amthif command queue upon disconnection. The issue may happen only on error path as the command queue is cleaned upon file descriptor close. And remove the cleanup from mei_cl_flush_queues as this code is never reached for amthif client. Signed-off-by:
-
Alexander Usyskin authored
On legacy HW, pre Skylake, the notifications are not supported, return -EOPNOTSUPP in mei_cl_notify_get and prevent waiting indefinitely. Signed-off-by:
-
Alexander Usyskin authored
Request for a notification from a disconnected client will be ignored silently by the FW but the caller should know that the operation hasn't succeeded. Signed-off-by:
-
Alexander Usyskin authored
Stop and unregister receive and notification callbacks from the disable function, to allow its later re-enablement. Signed-off-by:
-
Alexander Usyskin authored
The hardware module should not be unloaded if the bus has active devices. Get get_/put_ bus parent module upon client device connection/disconnection, to prevent the hardware managing module to disappear underneath. Signed-off-by:
-
Alexander Usyskin authored
A driver on the mei bus may rely on the availability of the receive callback during driver remove() call, e.g. mei_wdt. Move callbacks dismantling after the remove() call to unblock that scenario. Signed-off-by:
-
Alex Ng authored
Log the negotiated IC versions. Signed-off-by:
Alex Ng <alexng@messages.microsoft.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Alex Ng authored
Previously, we were assuming that each IC protocol version was tied to a specific host version. For example, some Windows 10 preview hosts only support v3 TimeSync even though driver assumes v4 is supported by all Windows 10 hosts. The guest will stop trying to negotiate even though older supported versions may still be offered by the host. Make IC version negotiation more robust by going through all versions that are supported by the guest. Fixes: 3da0401b ("Drivers: hv: utils: Fix the mapping between host version and protocol to use") Reported-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Coverity scan gives a warning when there is fall through in a switch without a comment. This fall through is intentional as ol_waitevent needs to be completed to unblock hv_mem_hot_add() allowing it to process next requests regardless of the result of if we were able to online this block. Reported-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
We need to cleanup the TSC page before doing kexec/kdump or the new kernel may crash if it tries to use it. Fixes: 63ed4e0c ("Drivers: hv: vmbus: Consolidate all Hyper-V specific clocksource code") Signed-off-by:
-
Vitaly Kuznetsov authored
We need to cleanup the hypercall page before doing kexec/kdump or the new kernel may crash if it tries to use it. Reuse the now-empty hv_cleanup function renaming it to hyperv_cleanup and moving to the arch specific code. Fixes: 8730046c ("Drivers: hv vmbus: Move Hypercall page setup out of common code") Signed-off-by:
-
Vitaly Kuznetsov authored
do_settimeofday() is deprecated, use do_settimeofday64() instead. Signed-off-by:
John Stultz <john.stultz@linaro.org> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
- 27 Jan, 2017 2 commits
-
-
Wei Yongjun authored
It's not necessary to free memory allocated with devm_kzalloc and using kfree leads to a double free. Fixes: cfad6425 ("eeprom: Add IDT 89HPESx EEPROM/CSR driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
Serge Semin authored
Indeed, the data structure is allocated by device resource manager, so the driver doesn't need to free anything on remove() callback. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
- 25 Jan, 2017 23 commits
-
-
Luis R. Rodriguez authored
We have no custom fallback mechanism test interface. Provide one. This tests both the custom fallback mechanism and cancelling the it. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Luis R. Rodriguez authored
Add a test case for cancelling the sync fallback mechanism. Signed-off-by:
-
Luis R. Rodriguez authored
Calling it user mode helper only creates confusion. Signed-off-by:
-
Luis R. Rodriguez authored
Some distributions (Debian, OpenSUSE) have a udev rule in place to cancel all fallback mechanism uevents immediately. This would obviously make it hard to test against the fallback mechanism test interface, so we need to check for this. Signed-off-by:
-
Luis R. Rodriguez authored
This simplifies init and exit. Signed-off-by:
-
Luis R. Rodriguez authored
This will make further changes easier to review. Signed-off-by:
-
Vivek Gautam authored
The nvmem cell with a NULL cell name/id should be the one with no accompanying 'nvmem-cell-names' property, and thus will be the cell at index 0 in the device tree. So, we default to index 0 and update the cell index only when nvmem cell name id exists. Suggested-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
-
Vivek Gautam authored
Correct the documentation for arguments to a number of functions. Signed-off-by:
-
Vivek Gautam authored
nvmem_cell_read() API fills in the argument 'len' with the number of bytes read from the cell. Many users don't care about this length value. So allow users to pass a NULL pointer to this len field. Signed-off-by:
-
Bai Ping authored
Add new compatible string for i.MX6UL SOC. Signed-off-by:
Bai Ping <ping.bai@nxp.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bai Ping authored
i.MX6UL is an new SOC of i.MX6 family. Enable ocotp driver support for this SOC. Signed-off-by:
-
Dave Gerlach authored
Introduce a new "protect-exec" reserved sram area type which is makes use of the the existing functionality provided for the "pool" sram region type for use with the genalloc framework and with the added requirement that it be maintained as read-only and executable while allowing for an arbitrary number of drivers to share the space. This introduces a common way to maintain a region of sram as read-only and executable and also introduces a helper function, sram_exec_copy, which allows for copying data to this protected region while maintaining locking to avoid conflicts between multiple users of the same space. A region of memory that is marked with the "protect-exec" flag in the device tree also has the requirement of providing a page aligned block of memory so that the page attribute manipulation does not affect surrounding regions. Also, selectively enable this only for builds that support set_memory_* calls, for now just ARM, through the use of Kconfig. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Dave Gerlach authored
Some platforms, like many ARM SoCs, require the ability to run code from on-chip memory like SRAM for tasks like reconfiguring the SDRAM controller or entering low-power sleep modes. In order to do this we must be able to allocate memory that the code can be copied to but then change the mapping to be read-only and executable so that no memory is both writable and executable at the same time to avoid opening any unneccesary security holes. By using the existing "pool" partition type that the SRAM driver allows we can create a memory space that will already be exposed by the genalloc framework to allow for allocating memory but we must extend this to meet the executable requirements. By making use of various set_memory_* APIs we can change the attributes of pages to make them writable for code upload but then read-only and executable when we want to actually run code. Because SRAM is a shared resource we need a centralized manager of these set memory calls. Because the SRAM driver itself is responsible for allocating the memory we can introduce a sram_copy_exec API for the driver that works like memcpy but also manages the page attributes and locking to allow multiple users of the same SRAM space to all copy their code over independent of other each before starting execution. It is maintained in a separate file from the core SRAM driver to allow it to be selectively built depending on whether or not a platform has the appropriate set_memory_* APIs. A future patch will integrate it with the core SRAM driver. Signed-off-by:
-
Dave Gerlach authored
In preparation of a coming file split of the sram driver, move the common data structures into a local header file that can be shared between files related to the sram driver. Signed-off-by:
-
Andrew F. Davis authored
Remove filename from file, this is not done anymore as it doesn't add anything and usually is incorrect as filename change often. Also shorten the GPL to the more common address-less version and remove excess white-space. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
-
Maciej S. Szmigiero authored
Near the beginning of w1_attach_slave_device() we increment a w1 master reference count. Later, when we are going to exit this function without actually attaching a slave device (due to failure of __w1_attach_slave_device()) we need to decrement this reference count back. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Cc: stable@vger.kernel.org Fixes: 9fcbbac5 ("w1: process w1 netlink commands in w1_process thread") Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
This adds a driver for a DS2405 1-wire single-channel addressable switch. The DS2405 can also work as a single-channel binary remote sensor. This driver supports two attributes: "state" and "output" which are the same attribute names as supported by existing DS2406, DS2408 and DS2413 drivers. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by:
-
Maciej S. Szmigiero authored
ds2490 driver was doing USB transfers from / to buffers on a stack. This is not permitted and made the driver non-working with vmapped stacks. Since all these transfers are done under the same bus_mutex lock we can simply use shared buffers in a device private structure for two most common of them. While we are at it, let's also fix a comparison between int and size_t in ds9490r_search() which made the driver spin in this function if state register get requests were failing. Signed-off-by:
-
Christophe JAILLET authored
In case of error returned by '_omap_hdq_reset()', free resources as done elsewhere in this function. This patch slighly changes the semantic of the code. It now propagates the error code returned by '_omap_hdq_reset()' instead of returning -EINVAL unconditionally. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
-
Mathieu Poirier authored
When using the ETM4x tracers from the perf interface two trace options are available: cycle accurate and timestamp. Enabling the timestamp feature is done by setting TRCCONFIGR.TS (bit 11). The position of the timestamp bit in that register coincidentally happens to be the same as what was chosen to enable timestamping from the 'mode' sysFS entry. The code does the right thing but the semantic is wrong. This patch sets TRCCONFIGR.TS explicitly, as it is done from the sysFS interface. That way timestamps are set the same way from both perf and sysFS and there is no misunderstanding as to what is intended. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Mike Leach authored
Using perf record 'cyclacc' option in cs_etm event was not setting up cycle accurate trace correctly. Corrects bit set in TRCCONFIGR to enable cycle accurate trace. Programs TRCCCCTLR with a valid threshold value as required by ETMv4 spec. Signed-off-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
-
Wang Nan authored
Commit d52c9750 ("coresight: reset "enable_sink" flag when need be") caused a kernel panic because of the using of an invalid value: after 'for_each_cpu(cpu, mask)', value of local variable 'cpu' become invalid, causes following 'cpu_to_node' access invalid memory area. This patch brings the deleted 'cpu = cpumask_first(mask)' back. Panic log: $ perf record -e cs_etm// ls Unable to handle kernel paging request at virtual address fffe801804af4f10 pgd = ffff8017ce031600 [fffe801804af4f10] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 33 PID: 1619 Comm: perf Not tainted 4.7.1+ #16 Hardware name: Huawei Taishan 2280 /CH05TEVBA, BIOS 1.10 11/24/2016 task: ffff8017cb0c8400 ti: ffff8017cb154000 task.ti: ffff8017cb154000 PC is at tmc_alloc_etf_buffer+0x60/0xd4 LR is at tmc_alloc_etf_buffer+0x44/0xd4 pc : [<ffff000008633df8>] lr : [<ffff000008633ddc>] pstate: 60000145 sp : ffff8017cb157b40 x29: ffff8017cb157b40 x28: 0000000000000000 ...skip... 7a60: ffff000008c64dc8 0000000000000006 0000000000000253 ffffffffffffffff 7a80: 0000000000000000 0000000000000000 ffff0000080872cc 0000000000000001 [<ffff000008633df8>] tmc_alloc_etf_buffer+0x60/0xd4 [<ffff000008632b9c>] etm_setup_aux+0x1dc/0x1e8 [<ffff00000816eed4>] rb_alloc_aux+0x2b0/0x338 [<ffff00000816a5e4>] perf_mmap+0x414/0x568 [<ffff0000081ab694>] mmap_region+0x324/0x544 [<ffff0000081abbe8>] do_mmap+0x334/0x3e0 [<ffff000008191150>] vm_mmap_pgoff+0xa4/0xc8 [<ffff0000081a9a30>] SyS_mmap_pgoff+0xb0/0x22c [<ffff0000080872e4>] sys_mmap+0x18/0x28 [<ffff0000080843f0>] el0_svc_naked+0x24/0x28 Code: 912040a5 d0001c00 f873d821 911c6000 (b8656822) ---[ end trace 98933da8f92b0c9a ]--- Signed-off-by:
Wang Nan <wangnan0@huawei.com> Cc: Xia Kaixu <xiakaixu@huawei.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: d52c9750 ("coresight: reset "enable_sink" flag when need be") Signed-off-by:
-
Stefano Babic authored
Commit 050c3d52 ("vme: make core vme support explicitly non-modular") dropped the remove function because it appeared as if it was for removal of the bus, which is not supported. However, vme_bus_remove() is called when a VME device is removed from the bus and not when the bus is removed; as it calls the VME device driver's cleanup function. Without this function, the remove() in the VME device driver is never called and VME device drivers cannot be reloaded again. Here we restore the remove function that was deleted in that commit, and the reference to the function in the bus structure. Fixes: 050c3d52 ("vme: make core vme support explicitly non-modular") Cc: Manohar Vanga <manohar.vanga@gmail.com> Acked-by:
Martyn Welch <martyn@welchs.me.uk> Cc: devel@driverdev.osuosl.org Signed-off-by:
Stefano Babic <sbabic@denx.de> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: stable <stable@vger.kernel.org> # 4.9 Signed-off-by:
-
