- 27 Jul, 2011 40 commits
-
-
Mauro Carvalho Chehab authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
After return, we don't need any other statement to change the function flux ;) Reported-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
The error propagation changeset c23bf4402 broke the DVB-T code. The legacy way for propagate errors was: do { status = foo_func() if (status < 0) break; } while (0); return status; However, on a few places, it was doing: do { switch(foo) { case bar: status = foo_func() if (status < 0) break; break; } switch(foo2) { case bar: status = foo_func() if (status < 0) break; break; } ... } while (0); return (status) The inner error break were not working, as it were breaking only the switch, instead of the do. The solution used were to do a s/break/goto error/ at the inner breaks, but preserving the last break. Onfortunately, on a few switches, the replacement were applied also to the final break for the case statements. Fix the broken logic, by reverting them to break, where pertinent, in order to fix DVB-T support. Signed-off-by: -
Mauro Carvalho Chehab authored
Both ngene and ddbrige calls dvb_attach once for drxk_attach. The logic used there, and by tda18271c2dd driver is different from similar logic on other frontends. The right fix is to change them to use the same logic, but, while we don't do that, we need to patch em28xx-dvb in order to do cope with ngene/ddbridge magic. While here, document why drxk_t_release should do nothing. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
This reverts commit a3e4adf274f86b2363fedaa964297cb38526cef0. As pointed by Andread Oberritter <obi@linuxtv.org>: That's wrong, because the array size is DTV_MAX_COMMAND + 1. Using the ARRAY_SIZE macro instead might reduce the confusion. Also, changeset 3995223038 already fixed this issue. Reported-by:
Andread Oberritter <obi@linuxtv.org> Signed-off-by:
-
istvan_v@mailbox.hu authored
The following patch adds a new control that makes it possible to set the luma notch filter type to finetune picture quality. Signed-off-by:
Istvan Varga <istvan_v@mailbox.hu> Signed-off-by:
-
istvan_v@mailbox.hu authored
This patch implements support for a sharpness control, using the luma peaking filter feature of cx2388x. [mchehab@redhat.com: use cx_andor instead of cx_write] Signed-off-by:
-
Tomasz Stanislawski authored
Add driver for TV Mixer on Samsung platforms from S5P family. Mixer is responsible for merging images from three layers and passing result to the output. Drivers are using: - v4l2 framework - videobuf2 - runtime PM Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Tomasz Stanislawski authored
Add drivers for Standard Definition output (SDO) on Samsung platforms from S5P family. The driver provides control over streaming analog TV via Composite connector. Driver is using: - v4l2 framework - runtime PM Signed-off-by:
-
Tomasz Stanislawski authored
Add drivers for HDMI outputs on Samsung platforms from S5P family. Drivers are using: - v4l2 framework - runtime PM Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire current analog TV standard from a subdev. It is used to avoid keeping current standard in top-level driver. Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire current digital video preset from a subdev. It is used to avoid keeping dv preset in top-level driver. Signed-off-by:
-
Tomasz Stanislawski authored
Callback is used to acquire TV norms supported by a subdev. It is used to avoid having standards in top-level driver. Signed-off-by:
-
Devin Heitmueller authored
The cx88 driver would force core->input to always be zero when doing the the request_acquire(). While it wasn't actually changing the input register in the hardware, the driver makes decision based on the current input. In particular, it decides whether to do things like enabling the comb filter when on a composite input but disabling it on s-video. So for example, on the HVR-1300, using the s-video input with the MPEG encoder would end up with the video decoder core configured as though the input type were composite. In short, the driver state did not match the hardware state. This patch does two things: 1. It forces the input to zero only if actually switching to DVB mode. This prevents the input from changing when the blackbird driver opens the device. 2. Keep track of what the input was set to when switching to DVB, and reset it back when done. This eliminates a condition where for example the user had the analog side of the board set to capture on the s-video input, then he used DVB for a bit, then the analog input would unexpectedly be set to the tuner input. This work was sponsored by Anevia S.A. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Florent Audebert <florent.audebert@anevia.com> Signed-off-by:
-
Kamil Debski authored
Multi Format Codec 5.1 is a hardware video coding acceleration module found in the S5PV210 and Exynos4 Samsung SoCs. It is capable of handling a range of video codecs and this driver provides a V4L2 interface for video decoding and encoding. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Jarod Wilson authored
This is admittedly a bit of a hack, but if we change our timeout value to something longer and fudge our synthesized trailing space sample based on the initial pulse sample, rc-core decode continues to work just fine with both rc-6 and rc-5, and now lirc userspace decode shows proper repeats for both of those protocols as well. Also tested NEC successfully with both decode options. We do still need a reset timer callback using the hardware's timeout value to make sure we actually process samples correctly, regardless of our somewhat hacky timeout and synthesized trailer above. This also adds a missing del_timer_sync call to the module unload path. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Trying to cap duration before multiplying it was obviously wrong. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
-
Jarod Wilson authored
We already add a trailing space, this wasn't doing anything useful, and actually confused lirc userspace a bit. Rip it out. CC: Chris Dodge <chris@redrat.co.uk> CC: Andrew Vincer <andrew.vincer@redrat.co.uk> CC: Stephen Cox <scox_nz@yahoo.com> Signed-off-by:
-
Jarod Wilson authored
This is a custom IR protocol decoder, for the RC-6-ish protocol used by the Microsoft Remote Keyboard, apparently developed internally at Microsoft, and officially dubbed MCIR-2, per their March 2011 remote and transceiver requirements and specifications document, which also touches on this IR keyboard/mouse device. Its a standard keyboard with embedded thumb stick mouse pointer and mouse buttons, along with a number of media keys. The media keys are standard RC-6, identical to the signals from the stock MCE remotes, and will be handled as such. The keyboard and mouse signals will be decoded and delivered to the system by an input device registered specifically by this driver. Successfully tested with multiple mceusb-driven transceivers, as well as with fintek-cir and redrat3 hardware. Essentially, any raw IR hardware with enough sampling resolution should be able to use this decoder, nothing about it is at all receiver-hardware-specific. This work is inspired by lirc_mod_mce: The documentation there and code aided in understanding and decoding the protocol, but the bulk of the code is actually borrowed more from the existing in-kernel decoders than anything. I did recycle the keyboard keycode table, a few defines, and some of the keyboard and mouse data parsing bits from lirc_mod_mce though. Special thanks to James Meyer for providing the hardware, and being patient with me as I took forever to get around to writing this. callback routine to ensure we don't get any stuck keys, and used symbolic names for the keytable. Also cc'ing Florian this time, who I believe is the original mod-mce author... CC: Florian Demski <fdemski@users.sourceforge.net> Signed-off-by:
-
Emilio David Diaus Lopez authored
Signed-off-by:
Emilio David Diaus Lopez <reality_es@yahoo.es> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
It is useless. There is only one physical I2C-adapter. 2nd adapter was added originally due to some plans for allowing only one demod to access bus at time. But I never implemented proper locking... Signed-off-by:
-
Antti Palosaari authored
Remove old code which is not used anymore since IR code is read directly from memory nowadays. Signed-off-by:
-
Antti Palosaari authored
Return EOPNOTSUPP for too long messages. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Reported-by:
Jacek M. Holeczek <jacek.m.holeczek@gmail.com> Signed-off-by:
-
Juergen Lock authored
That's this tuner: The credit card sized remote more or less works if I set remote=4, so I added the hash to get it autodetected. (`more or less' there meaning sometimes buttons are `stuck on repeat', i.e. ir-keytable -t keeps repeating the same scancode until i press another button.) Signed-off-by:
Juergen Lock <nox@jelal.kn-bremen.de> Signed-off-by:
-
Jesper Juhl authored
In drivers/media/dvb/frontends/drxd_hard.c::load_firmware() I see 3 small issues: 1) When the 'fw' variable goes out of scope we'll leak the memory allocated to it by request_firmware() by neglecting to call release_firmware(). 2) After a successful request_firmware() we allocate fw->size bytes of memory using kzalloc() only to immediately overwrite all that memory with memcpy(), so asking for zeroed memory seems like wasted effort - just use kmalloc(). 3) In one of the error messages "no memory" lacks a space and is written as "nomemory". This patch fixes all 3 issues. Signed-off-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
Jarod Wilson authored
Microsoft's Windows Media Center specification and requirements doc from 2011.03.18 now refers to the former Power Toggle button as the Sleep Toggle, and recommends using a new moon sleep icon for it. Its the same key, but its apparently always been meant to put the system to sleep, not power it off. Adjust accordingly. While we're here, lets also remove the duplicate KEY_PLAYPAUSE entry. Signed-off-by:
-
Julia Lawall authored
Clear the cx231xx_devused variable and free dev in the error handling code, as done in the error handling code nearby. The semantic match that finds this problem is as follows: // <smpl> @r@ identifier x; @@ kfree(x) @@ identifier r.x; expression E1!=0,E2,E3,E4; statement S; @@ ( if (<+...x...+>) S | if (...) { ... when != kfree(x) when != if (...) { ... kfree(x); ... } when != x = E3 * return E1; } ... when != x = E2 if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by:Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Free the recently allocated qcam in each case. The semantic match that finds this problem is as follows: // <smpl> @r@ identifier x; @@ kfree(x) @@ identifier r.x; expression E1!=0,E2,E3,E4; statement S; @@ ( if (<+...x...+>) S | if (...) { ... when != kfree(x) when != if (...) { ... kfree(x); ... } when != x = E3 * return E1; } ... when != x = E2 if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: -
Adam M. Dutko authored
There were several coding style errors as reported by checkpatch.pl. This patch should fix those errors with the single exception of the open square bracket issue on line 45. [mchehab@redhat.com: Fix a merge conflict] Signed-off-by:
Adam M. Dutko <dutko.adam@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This was likely used by some test. There's no sense on keeping it upstream. Signed-off-by: -
Dan Carpenter authored
If the tvp->cmd == DTV_MAX_COMMAND then we read past the end of the array. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
istvan_v@mailbox.hu authored
This patch, based on code by Mirek Slugen, implements support for the Leadtek WinFast PxDVR3200 H card with XC4000 tuner (107d:6f39). Signed-off-by:
-
Jesper Juhl authored
Make sure that the 'static' keywork is at the beginning of declaration for drivers/media/video/omap/omap_vout.c This gets rid of warnings like when building with -Wold-style-declaration (and/or -Wextra which also enables it). Signed-off-by:
-
Jonathan Corbet authored
Delete a couple of leftover fields whose time has passed. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Jonathan Corbet authored
The Marvell camera core can support all three videobuf2 buffer modes, which is slick, but it also requires that all three modes be built and present, even though only one is likely to be used. This patch allows the supported modes to be selected at configuration time, reducing the footprint of the driver. Prior to this patch, the MMP camera driver looked like this: mmp_camera 19092 0 videobuf2_core 15542 1 mmp_camera videobuf2_dma_sg 3173 1 mmp_camera videobuf2_dma_contig 2188 1 mmp_camera videobuf2_vmalloc 1718 1 mmp_camera videobuf2_memops 2100 3 videobuf2_dma_sg,videobuf2_dma_contig,videobuf2_vmalloc Afterward, instead, with scatter/gather only configured: mmp_camera 16021 0 videobuf2_core 15542 1 mmp_camera videobuf2_dma_sg 3173 1 mmp_camera videobuf2_memops 2100 1 videobuf2_dma_sg The total goes from 43,813 bytes to 36,836. The emphasis has been on simplicity and minimal #ifdef use rather than on squeezing out every possible byte of code. For configuration, the driver simply looks at which videobuf2 modes have been configured in and supports them all; it's simplistic but should be good enough. The cafe driver is set to support vmalloc and dma-contig; mmp supports only dma-sg, since that's the only mode that really makes sense to use. Signed-off-by:
-
Jonathan Corbet authored
If registration does not work, we don't want to leave the sensor powered on. Signed-off-by:
-
