- 23 Feb, 2017 40 commits
-
-
Ulf Hansson authored
commit 4f48aa7a upstream. Accesses of the rtsx sdmmc's parent device, which is the rtsx usb device, must be done when it's runtime resumed. Currently this isn't case when changing the led, so let's fix this by adding a pm_runtime_get_sync() and a pm_runtime_put() around those operations. Reported-by:
Ritesh Raj Sarraf <rrs@researchut.com> Tested-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Ulf Hansson authored
commit 31cf742f upstream. The rtsx_usb_sdmmc driver may bail out in its ->set_ios() callback when no SD card is inserted. This is wrong, as it could cause the device to remain runtime resumed when it's unused. Fix this behaviour. Tested-by:
-
Haibo Chen authored
commit 02265cd6 upstream. Potentially overflowing expression 1000000 * data->timeout_clks with type unsigned int is evaluated using 32-bit arithmetic, and then used in a context that expects an expression of type unsigned long long. To avoid overflow, cast 1000000U to type unsigned long long. Special thanks to Coverity. Fixes: 7f05538a ("mmc: sdhci: fix data timeout (part 2)") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit e7cb08e8 upstream. We accidentally overwrite the original saved value of "flags" so that we can't re-enable IRQs at the end of the function. Presumably this function is mostly called with IRQs disabled or it would be obvious in testing. Fixes: aceeffbb ("zfcp: trace full payload of all SAN records (req,resp,iels)") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Nicolas Dichtel authored
commit a220445f upstream. The goal of the patch is to fix this scenario: ip link add dummy1 type dummy ip link set dummy1 up ip link set lo down ; ip link set lo up After that sequence, the local route to the link layer address of dummy1 is not there anymore. When the loopback is set down, all local routes are deleted by addrconf_ifdown()/rt6_ifdown(). At this time, the rt6_info entry still exists, because the corresponding idev has a reference on it. After the rcu grace period, dst_rcu_free() is called, and thus ___dst_free(), which will set obsolete to DST_OBSOLETE_DEAD. In this case, init_loopback() is called before dst_rcu_free(), thus obsolete is still sets to something <= 0. So, the function doesn't add the route again. To avoid that race, let's check the rt6 refcnt instead. Fixes: 25fb6ca4 ("net IPv6 : Fix broken IPv6 routing table after loopback down-up") Fixes: a881ae1f ("ipv6: don't call addrconf_dst_alloc again when enable lo") Fixes: 33d99113 ("ipv6: reallocate addrconf router for ipv6 address when lo device up") Reported-by:
Francesco Santoro <francesco.santoro@6wind.com> Reported-by:
Samuel Gauthier <samuel.gauthier@6wind.com> CC: Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> CC: Maruthi Thotad <Maruthi.Thotad@ap.sony.com> CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> CC: Weilong Chen <chenweilong@huawei.com> CC: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Alex Deucher authored
commit 02cfb5fc upstream. Ported from Rex's amdgpu change. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Taesoo Kim authored
commit 559cce69 upstream. When 'jh->b_transaction == transaction' (asserted by below) J_ASSERT_JH(jh, (jh->b_transaction == transaction || ... 'journal->j_list_lock' will be incorrectly unlocked, since the the lock is aquired only at the end of if / else-if statements (missing the else case). Signed-off-by:
Taesoo Kim <tsgatesv@gmail.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Fixes: 6e4862a5Signed-off-by:
-
Johannes Berg authored
commit ea720935 upstream. In mac80211, multicast A-MSDUs are accepted in many cases that they shouldn't be accepted in: * drop A-MSDUs with a multicast A1 (RA), as required by the spec in 9.11 (802.11-2012 version) * drop A-MSDUs with a 4-addr header, since the fourth address can't actually be useful for them; unless 4-address frame format is actually requested, even though the fourth address is still not useful in this case, but ignored Accepting the first case, in particular, is very problematic since it allows anyone else with possession of a GTK to send unicast frames encapsulated in a multicast A-MSDU, even when the AP has client isolation enabled. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Ming Lei authored
commit bcd8f2e9 upstream. This patch fixes one use-after-free report[1] by KASAN. In __scsi_scan_target(), when a type 31 device is probed, SCSI_SCAN_TARGET_PRESENT is returned and the target will be scanned again. Inside the following scsi_report_lun_scan(), one new scsi_device instance is allocated, and scsi_probe_and_add_lun() is called again to probe the target and still see type 31 device, finally __scsi_remove_device() is called to remove & free the device at the end of scsi_probe_and_add_lun(), so cause use-after-free in scsi_report_lun_scan(). And the following SCSI log can be observed: scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added scsi 0:0:2:0: scsi scan: Sending REPORT LUNS to (try 0) scsi 0:0:2:0: scsi scan: REPORT LUNS successful (try 0) result 0x0 scsi 0:0:2:0: scsi scan: REPORT LUN scan scsi 0:0:2:0: scsi scan: INQUIRY pass 1 length 36 scsi 0:0:2:0: scsi scan: INQUIRY successful with code 0x0 scsi 0:0:2:0: scsi scan: peripheral device type of 31, no device added BUG: KASAN: use-after-free in __scsi_scan_target+0xbf8/0xe40 at addr ffff88007b44a104 This patch fixes the issue by moving the putting reference at the end of scsi_report_lun_scan(). [1] KASAN report ================================================================== [ 3.274597] PM: Adding info for serio:serio1 [ 3.275127] BUG: KASAN: use-after-free in __scsi_scan_target+0xd87/0xdf0 at addr ffff880254d8c304 [ 3.275653] Read of size 4 by task kworker/u10:0/27 [ 3.275903] CPU: 3 PID: 27 Comm: kworker/u10:0 Not tainted 4.8.0 #2121 [ 3.276258] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 3.276797] Workqueue: events_unbound async_run_entry_fn [ 3.277083] ffff880254d8c380 ffff880259a37870 ffffffff94bbc6c1 ffff880078402d80 [ 3.277532] ffff880254d8bb80 ffff880259a37898 ffffffff9459fec1 ffff880259a37930 [ 3.277989] ffff880254d8bb80 ffff880078402d80 ffff880259a37920 ffffffff945a0165 [ 3.278436] Call Trace: [ 3.278528] [<ffffffff94bbc6c1>] dump_stack+0x65/0x84 [ 3.278797] [<ffffffff9459fec1>] kasan_object_err+0x21/0x70 [ 3.279063] device: 'psaux': device_add [ 3.279616] [<ffffffff945a0165>] kasan_report_error+0x205/0x500 [ 3.279651] PM: Adding info for No Bus:psaux [ 3.280202] [<ffffffff944ecd22>] ? kfree_const+0x22/0x30 [ 3.280486] [<ffffffff94bc2dc9>] ? kobject_release+0x119/0x370 [ 3.280805] [<ffffffff945a0543>] __asan_report_load4_noabort+0x43/0x50 [ 3.281170] [<ffffffff9507e1f7>] ? __scsi_scan_target+0xd87/0xdf0 [ 3.281506] [<ffffffff9507e1f7>] __scsi_scan_target+0xd87/0xdf0 [ 3.281848] [<ffffffff9507d470>] ? scsi_add_device+0x30/0x30 [ 3.282156] [<ffffffff94f7f660>] ? pm_runtime_autosuspend_expiration+0x60/0x60 [ 3.282570] [<ffffffff956ddb07>] ? _raw_spin_lock+0x17/0x40 [ 3.282880] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.283200] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.283563] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.283882] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.284173] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.284492] [<ffffffff941a8954>] ? pwq_dec_nr_in_flight+0x124/0x2a0 [ 3.284876] [<ffffffff941d1770>] ? preempt_count_add+0x130/0x160 [ 3.285207] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.285526] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.285844] [<ffffffff941aa810>] ? process_one_work+0x12d0/0x12d0 [ 3.286182] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.286443] [<ffffffff940855cd>] ? __switch_to+0x88d/0x1430 [ 3.286745] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287085] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.287368] [<ffffffff941bb1a0>] ? kthread_worker_fn+0x5a0/0x5a0 [ 3.287697] Object at ffff880254d8bb80, in cache kmalloc-2048 size: 2048 [ 3.288064] Allocated: [ 3.288147] PID = 27 [ 3.288218] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.288531] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.288806] [<ffffffff9459f4bd>] kasan_kmalloc+0xad/0xe0 [ 3.289098] [<ffffffff9459c07e>] __kmalloc+0x13e/0x250 [ 3.289378] [<ffffffff95078e5a>] scsi_alloc_sdev+0xea/0xcf0 [ 3.289701] [<ffffffff9507de76>] __scsi_scan_target+0xa06/0xdf0 [ 3.290034] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.290362] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.290724] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.291055] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.291354] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.291695] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.292022] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.292325] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.292594] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.292886] Freed: [ 3.292945] PID = 27 [ 3.293016] [<ffffffff940b27ab>] save_stack_trace+0x2b/0x50 [ 3.293327] [<ffffffff9459f246>] save_stack+0x46/0xd0 [ 3.293600] [<ffffffff9459fa61>] kasan_slab_free+0x71/0xb0 [ 3.293916] [<ffffffff9459bac2>] kfree+0xa2/0x1f0 [ 3.294168] [<ffffffff9508158a>] scsi_device_dev_release_usercontext+0x50a/0x730 [ 3.294598] [<ffffffff941ace9a>] execute_in_process_context+0xda/0x130 [ 3.294974] [<ffffffff9508107c>] scsi_device_dev_release+0x1c/0x20 [ 3.295322] [<ffffffff94f566f6>] device_release+0x76/0x1e0 [ 3.295626] [<ffffffff94bc2db7>] kobject_release+0x107/0x370 [ 3.295942] [<ffffffff94bc29ce>] kobject_put+0x4e/0xa0 [ 3.296222] [<ffffffff94f56e17>] put_device+0x17/0x20 [ 3.296497] [<ffffffff9505201c>] scsi_device_put+0x7c/0xa0 [ 3.296801] [<ffffffff9507e1bc>] __scsi_scan_target+0xd4c/0xdf0 [ 3.297132] [<ffffffff9507e505>] scsi_scan_channel+0x105/0x160 [ 3.297458] [<ffffffff9507e8a2>] scsi_scan_host_selected+0x212/0x2f0 [ 3.297829] [<ffffffff9507eb3c>] do_scsi_scan_host+0x1bc/0x250 [ 3.298156] [<ffffffff9507efc1>] do_scan_async+0x41/0x450 [ 3.298453] [<ffffffff941c1fee>] async_run_entry_fn+0xfe/0x610 [ 3.298777] [<ffffffff941a9a84>] process_one_work+0x544/0x12d0 [ 3.299105] [<ffffffff941aa8e9>] worker_thread+0xd9/0x12f0 [ 3.299408] [<ffffffff941bb365>] kthread+0x1c5/0x260 [ 3.299676] [<ffffffff956dde9f>] ret_from_fork+0x1f/0x40 [ 3.299967] Memory state around the buggy address: [ 3.300209] ffff880254d8c200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300608] ffff880254d8c280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.300986] >ffff880254d8c300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 3.301408] ^ [ 3.301550] ffff880254d8c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 3.301987] ffff880254d8c400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 3.302396] ================================================================== Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
murray foster authored
commit aa5f9209 upstream. Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by:
Murray Foster <mrafoster@gmail.com> Acked-by:
Paul Handrigan <Paul.Handrigan@cirrus.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Jiri Slaby authored
commit 3f2d2664 upstream. Commit f68381a7 (mmc: block: fix packed command header endianness) correctly fixed endianness handling of packed_cmd_hdr in mmc_blk_packed_hdr_wrq_prep. But now, sparse complains about incorrect types: drivers/mmc/card/block.c:1613:27: sparse: incorrect type in assignment (different base types) drivers/mmc/card/block.c:1613:27: expected unsigned int [unsigned] [usertype] <noident> drivers/mmc/card/block.c:1613:27: got restricted __le32 [usertype] <noident> ... So annotate cmd_hdr properly using __le32 to make everyone happy. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Fixes: f68381a7 (mmc: block: fix packed command header endianness) Signed-off-by:
-
Oleg Nesterov authored
commit 89f39af1 upstream. Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering. In this case thaw_super() will wrongly call s_op->unfreeze_fs() before it was actually frozen, and call sb_freeze_unlock() which leads to the unbalanced percpu_up_write(). Unfortunately lockdep can't detect this, so this triggers misc BUG_ON()'s in kernel/rcu/sync.c. Reported-and-tested-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Steve French authored
commit 24df1483 upstream. Cleanup some missing mem frees on some cifs ioctls, and clarify others to make more obvious that no data is returned. Signed-off-by:
Steve French <smfrench@gmail.com> Acked-by:
Sachin Prabhu <sprabhu@redhat.com> [bwh: Backported to 3.16: - Drop changes to smb2_duplicate_extents(), smb3_set_integrity() - Adjust context] Signed-off-by:
-
Steve French authored
commit 18dd8e1a upstream. [CIFS] We had cases where we sent a SMB2/SMB3 setinfo request with all timestamp (and DOS attribute) fields marked as 0 (ie do not change) e.g. on chmod or chown. Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Steve French authored
commit 3afca265 upstream. Remove the global file_list_lock to simplify cifs/smb3 locking and have spinlocks that more closely match the information they are protecting. Add new tcon->open_file_lock and file->file_info_lock spinlocks. Locks continue to follow a heirachy, cifs_socket --> cifs_ses --> cifs_tcon --> cifs_file where global tcp_ses_lock still protects socket and cifs_ses, while the the newer locks protect the lower level structure's information (tcon and cifs_file respectively). Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Reviewed-by:
Germano Percossi <germano.percossi@citrix.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Steve French authored
commit fa70b87c upstream. GUIDs although random, and 16 bytes, need to be generated as proper uuids. Signed-off-by:
David Goebels <davidgoe@microsoft.com> [bwh: Backported to 3.16: drop changes to create_durable_v2_buf()] Signed-off-by:
-
Steve French authored
commit c2afb814 upstream. Signed-off-by:
-
Ross Lagerwall authored
commit 7d414f39 upstream. The kernel client requests 2 credits for many operations even though they only use 1 credit (presumably to build up a buffer of credit). Some servers seem to give the client as much credit as is requested. In this case, the amount of credit the client has continues increasing to the point where (server->credits * MAX_BUFFER_SIZE) overflows in smb2_wait_mtu_credits(). Fix this by throttling the credit requests if an set limit is reached. For async requests where the credit charge may be > 1, request as much credit as what is charged. The limit is chosen somewhat arbitrarily. The Windows client defaults to 128 credits, the Windows server allows clients up to 512 credits (or 8192 for Windows 2016), and the NetApp server (and at least one other) does not limit clients at all. Choose a high enough value such that the client shouldn't limit performance. This behavior was seen with a NetApp filer (NetApp Release 9.0RC2). Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Steve French authored
commit 9742805d upstream. In debugging smb3, it is useful to display the number of credits available, so we can see when the server has not granted sufficient operations for the client to make progress, or alternatively the client has requested too many credits (as we saw in a recent bug) so we can compare with the number of credits the server thinks we have. Add a /proc/fs/cifs/DebugData line to display the client view on how many credits are available. Signed-off-by:
-
Marcin Nowakowski authored
commit 74f1077b upstream. Currently regs_return_value always negates reg[2] if it determines the syscall has failed, but when called in kernel context this check is invalid and may result in returning a wrong value. This fixes errors reported by CONFIG_KPROBES_SANITY_TEST Fixes: d7e7528b ("Audit: push audit success and retcode into arch ptrace.h") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14381/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Manfred Spraul authored
commit 5864a2fd upstream. Commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") introduced a race: sem_lock has a fast path that allows parallel simple operations. There are two reasons why a simple operation cannot run in parallel: - a non-simple operations is ongoing (sma->sem_perm.lock held) - a complex operation is sleeping (sma->complex_count != 0) As both facts are stored independently, a thread can bypass the current checks by sleeping in the right positions. See below for more details (or kernel bugzilla 105651). The patch fixes that by creating one variable (complex_mode) that tracks both reasons why parallel operations are not possible. The patch also updates stale documentation regarding the locking. With regards to stable kernels: The patch is required for all kernels that include the commit 6d07b68c ("ipc/sem.c: optimize sem_lock()") (3.10?) The alternative is to revert the patch that introduced the race. The patch is safe for backporting, i.e. it makes no assumptions about memory barriers in spin_unlock_wait(). Background: Here is the race of the current implementation: Thread A: (simple op) - does the first "sma->complex_count == 0" test Thread B: (complex op) - does sem_lock(): This includes an array scan. But the scan can't find Thread A, because Thread A does not own sem->lock yet. - the thread does the operation, increases complex_count, drops sem_lock, sleeps Thread A: - spin_lock(&sem->lock), spin_is_locked(sma->sem_perm.lock) - sleeps before the complex_count test Thread C: (complex op) - does sem_lock (no array scan, complex_count==1) - wakes up Thread B. - decrements complex_count Thread A: - does the complex_count test Bug: Now both thread A and thread C operate on the same array, without any synchronization. Fixes: 6d07b68c ("ipc/sem.c: optimize sem_lock()") Link: http://lkml.kernel.org/r/1469123695-5661-1-git-send-email-manfred@colorfullife.com Reported-by: <felixh@informatik.uni-bremen.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: <1vier1@web.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: - We missed out on some earlier memory barrier changes - Use set_mb instead of smp_store_mb] Signed-off-by:
-
Joe Perches authored
commit 7f032d6e upstream. The seq_printf return value, because it's frequently misused, will eventually be converted to void. See: commit 1f33c41c ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Paul E. McKenney authored
commit 536fa402 upstream. CPUs without single-byte and double-byte loads and stores place some "interesting" requirements on concurrent code. For example (adapted from Peter Hurley's test code), suppose we have the following structure: struct foo { spinlock_t lock1; spinlock_t lock2; char a; /* Protected by lock1. */ char b; /* Protected by lock2. */ }; struct foo *foop; Of course, it is common (and good) practice to place data protected by different locks in separate cache lines. However, if the locks are rarely acquired (for example, only in rare error cases), and there are a great many instances of the data structure, then memory footprint can trump false-sharing concerns, so that it can be better to place them in the same cache cache line as above. But if the CPU does not support single-byte loads and stores, a store to foop->a will do a non-atomic read-modify-write operation on foop->b, which will come as a nasty surprise to someone holding foop->lock2. So we now require CPUs to support single-byte and double-byte loads and stores. Therefore, this commit adjusts the definition of __native_word() to allow these sizes to be used by smp_load_acquire() and smp_store_release(). Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Hidehiro Kawai authored
commit 54c721b8 upstream. Daniel Walker reported problems which happens when crash_kexec_post_notifiers kernel option is enabled (https://lkml.org/lkml/2015/6/24/44). In that case, smp_send_stop() is called before entering kdump routines which assume other CPUs are still online. As the result, kdump routines fail to save other CPUs' registers. Additionally for MIPS OCTEON, it misses to stop the watchdog timer. To fix this problem, call a new kdump friendly function, crash_smp_send_stop(), instead of the smp_send_stop() when crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak function, and it just call smp_send_stop(). Architecture codes should override it so that kdump can work appropriately. This patch provides MIPS version. Fixes: f06e5153 (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080950.11028.28000.stgit@sysi4-13.yrl.intra.hitachi.co.jpSigned-off-by:
Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Reported-by:
Daniel Walker <dwalker@fifo99.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Daniel Walker <dwalker@fifo99.com> Cc: Xunlei Pang <xpang@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Daney <david.daney@cavium.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Hidehiro Kawai authored
commit 0ee59413 upstream. Daniel Walker reported problems which happens when crash_kexec_post_notifiers kernel option is enabled (https://lkml.org/lkml/2015/6/24/44). In that case, smp_send_stop() is called before entering kdump routines which assume other CPUs are still online. As the result, for x86, kdump routines fail to save other CPUs' registers and disable virtualization extensions. To fix this problem, call a new kdump friendly function, crash_smp_send_stop(), instead of the smp_send_stop() when crash_kexec_post_notifiers is enabled. crash_smp_send_stop() is a weak function, and it just call smp_send_stop(). Architecture codes should override it so that kdump can work appropriately. This patch only provides x86-specific version. For Xen's PV kernel, just keep the current behavior. NOTES: - Right solution would be to place crash_smp_send_stop() before __crash_kexec() invocation in all cases and remove smp_send_stop(), but we can't do that until all architectures implement own crash_smp_send_stop() - crash_smp_send_stop()-like work is still needed by machine_crash_shutdown() because crash_kexec() can be called without entering panic() Fixes: f06e5153 (kernel/panic.c: add "crash_kexec_post_notifiers" option) Link: http://lkml.kernel.org/r/20160810080948.11028.15344.stgit@sysi4-13.yrl.intra.hitachi.co.jpSigned-off-by:
-
Paul Mackerras authored
commit 1a34439e upstream. Debugging a data corruption issue with virtio-net/vhost-net led to the observation that __copy_tofrom_user was occasionally returning a value 16 larger than it should. Since the return value from __copy_tofrom_user is the number of bytes not copied, this means that __copy_tofrom_user can occasionally return a value larger than the number of bytes it was asked to copy. In turn this can cause higher-level copy functions such as copy_page_to_iter_iovec to corrupt memory by copying data into the wrong memory locations. It turns out that the failing case involves a fault on the store at label 79, and at that point the first unmodified byte of the destination is at R3 + 16. Consequently the exception handler for that store needs to add 16 to R3 before using it to work out how many bytes were not copied, but in this one case it was not adding the offset to R3. To fix it, this moves the label 179 to the point where we add 16 to R3. I have checked manually all the exception handlers for the loads and stores in this code and the rest of them are correct (it would be excellent to have an automated test of all the exception cases). This bug has been present since this code was initially committed in May 2002 to Linux version 2.5.20. Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Laurent Dufour authored
commit 05af40e8 upstream. This commit fixes a stack corruption in the pseries specific code dealing with the huge pages. In __pSeries_lpar_hugepage_invalidate() the buffer used to pass arguments to the hypervisor is not large enough. This leads to a stack corruption where a previously saved register could be corrupted leading to unexpected result in the caller, like the following panic: Oops: Kernel access of bad area, sig: 11 [#1] SMP NR_CPUS=2048 NUMA pSeries Modules linked in: virtio_balloon ip_tables x_tables autofs4 virtio_blk 8139too virtio_pci virtio_ring 8139cp virtio CPU: 11 PID: 1916 Comm: mmstress Not tainted 4.8.0 #76 task: c000000005394880 task.stack: c000000005570000 NIP: c00000000027bf6c LR: c00000000027bf64 CTR: 0000000000000000 REGS: c000000005573820 TRAP: 0300 Not tainted (4.8.0) MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 84822884 XER: 20000000 CFAR: c00000000010a924 DAR: 420000000014e5e0 DSISR: 40000000 SOFTE: 1 GPR00: c00000000027bf64 c000000005573aa0 c000000000e02800 c000000004447964 GPR04: c00000000404de18 c000000004d38810 00000000042100f5 00000000f5002104 GPR08: e0000000f5002104 0000000000000001 042100f5000000e0 00000000042100f5 GPR12: 0000000000002200 c00000000fe02c00 c00000000404de18 0000000000000000 GPR16: c1ffffffffffe7ff 00003fff62000000 420000000014e5e0 00003fff63000000 GPR20: 0008000000000000 c0000000f7014800 0405e600000000e0 0000000000010000 GPR24: c000000004d38810 c000000004447c10 c00000000404de18 c000000004447964 GPR28: c000000005573b10 c000000004d38810 00003fff62000000 420000000014e5e0 NIP [c00000000027bf6c] zap_huge_pmd+0x4c/0x470 LR [c00000000027bf64] zap_huge_pmd+0x44/0x470 Call Trace: [c000000005573aa0] [c00000000027bf64] zap_huge_pmd+0x44/0x470 (unreliable) [c000000005573af0] [c00000000022bbd8] unmap_page_range+0xcf8/0xed0 [c000000005573c30] [c00000000022c2d4] unmap_vmas+0x84/0x120 [c000000005573c80] [c000000000235448] unmap_region+0xd8/0x1b0 [c000000005573d80] [c0000000002378f0] do_munmap+0x2d0/0x4c0 [c000000005573df0] [c000000000237be4] SyS_munmap+0x64/0xb0 [c000000005573e30] [c000000000009560] system_call+0x38/0x108 Instruction dump: fbe1fff8 fb81ffe0 7c7f1b78 7ca32b78 7cbd2b78 f8010010 7c9a2378 f821ffb1 7cde3378 4bfffea9 7c7b1b79 41820298 <e87f0000> 48000130 7fa5eb78 7fc4f378 Most of the time, the bug is surfacing in a caller up in the stack from __pSeries_lpar_hugepage_invalidate() which is quite confusing. This bug is pending since v3.11 but was hidden if a caller of the caller of __pSeries_lpar_hugepage_invalidate() has pushed the corruped register (r18 in this case) in the stack and is not using it until restoring it. GCC 6.2.0 seems to raise it more frequently. This commit also change the definition of the parameter buffer in pSeries_lpar_flush_hash_range() to rely on the global define PLPAR_HCALL9_BUFSIZE (no functional change here). Fixes: 1a527286 ("powerpc: Optimize hugepage invalidate") Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Wei Fang authored
commit c2a9737f upstream. We triggered a deadloop in truncate_inode_pages_range() on 32 bits architecture with the test case bellow: ... fd = open(); write(fd, buf, 4096); preadv64(fd, &iovec, 1, 0xffffffff000); ftruncate(fd, 0); ... Then ftruncate() will not return forever. The filesystem used in this case is ubifs, but it can be triggered on many other filesystems. When preadv64() is called with offset=0xffffffff000, a page with index=0xffffffff will be added to the radix tree of ->mapping. Then this page can be found in ->mapping with pagevec_lookup(). After that, truncate_inode_pages_range(), which is called in ftruncate(), will fall into an infinite loop: - find a page with index=0xffffffff, since index>=end, this page won't be truncated - index++, and index become 0 - the page with index=0xffffffff will be found again The data type of index is unsigned long, so index won't overflow to 0 on 64 bits architecture in this case, and the dead loop won't happen. Since truncate_inode_pages_range() is executed with holding lock of inode->i_rwsem, any operation related with this lock will be blocked, and a hung task will happen, e.g.: INFO: task truncate_test:3364 blocked for more than 120 seconds. ... call_rwsem_down_write_failed+0x17/0x30 generic_file_write_iter+0x32/0x1c0 ubifs_write_iter+0xcc/0x170 __vfs_write+0xc4/0x120 vfs_write+0xb2/0x1b0 SyS_write+0x46/0xa0 The page with index=0xffffffff added to ->mapping is useless. Fix this by checking the read position before allocating pages. Link: http://lkml.kernel.org/r/1475151010-40166-1-git-send-email-fangwei1@huawei.comSigned-off-by:
Wei Fang <fangwei1@huawei.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Gerald Schaefer authored
commit 082d5b6b upstream. In dissolve_free_huge_pages(), free hugepages will be dissolved without making sure that there are enough of them left to satisfy hugepage reservations. Fix this by adding a return value to dissolve_free_huge_pages() and checking h->free_huge_pages vs. h->resv_huge_pages. Note that this may lead to the situation where dissolve_free_huge_page() returns an error and all free hugepages that were dissolved before that error are lost, while the memory block still cannot be set offline. Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Link: http://lkml.kernel.org/r/20160926172811.94033-3-gerald.schaefer@de.ibm.comSigned-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rui Teng <rui.teng@linux.vnet.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by:
-
Gerald Schaefer authored
commit 2247bb33 upstream. Patch series "mm/hugetlb: memory offline issues with hugepages", v4. This addresses several issues with hugepages and memory offline. While the first patch fixes a panic, and is therefore rather important, the last patch is just a performance optimization. The second patch fixes a theoretical issue with reserved hugepages, while still leaving some ugly usability issue, see description. This patch (of 3): dissolve_free_huge_pages() will either run into the VM_BUG_ON() or a list corruption and addressing exception when trying to set a memory block offline that is part (but not the first part) of a "gigantic" hugetlb page with a size > memory block size. When no other smaller hugetlb page sizes are present, the VM_BUG_ON() will trigger directly. In the other case we will run into an addressing exception later, because dissolve_free_huge_page() will not work on the head page of the compound hugetlb page which will result in a NULL hstate from page_hstate(). To fix this, first remove the VM_BUG_ON() because it is wrong, and then use the compound head page in dissolve_free_huge_page(). This means that an unused pre-allocated gigantic page that has any part of itself inside the memory block that is going offline will be dissolved completely. Losing an unused gigantic hugepage is preferable to failing the memory offline, for example in the situation where a (possibly faulty) memory DIMM needs to go offline. Fixes: c8721bbb ("mm: memory-hotplug: enable memory hotplug to handle hugepage") Link: http://lkml.kernel.org/r/20160926172811.94033-2-gerald.schaefer@de.ibm.comSigned-off-by:
-
Dmitry Torokhov authored
commit 62837b3c upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Also let's reorder elantech_dmi_force_crc_enabled list so LIfebook enries are in alphabetical order. Reported-by:
William Linna <william.linna@gmail.com> Tested-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit 681cc360 upstream. Avoid that mapping an sg-list in which the first element has a non-zero offset triggers an infinite loop when using FMR. This patch makes the FMR mapping code similar to that of ib_sg_to_pages(). Note: older Mellanox HCAs do not support non-zero offsets for FMR. See also commit 8c4037b5 ("IB/srp: always avoid non-zero offsets into an FMR"). Reported-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Guenter Roeck authored
commit 35d04077 upstream. The definition of atomic_dec_if_positive() assumes that atomic_sub_if_positive() exists, which is only the case if metag specific atomics are used. This results in the following build error when trying to build metag1_defconfig. kernel/ucount.c: In function 'dec_ucount': kernel/ucount.c:211: error: implicit declaration of function 'atomic_sub_if_positive' Moving the definition of atomic_dec_if_positive() into the metag conditional code fixes the problem. Fixes: 6006c0d8 ("metag: Atomics, locks and bitops") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
Eric Dumazet authored
commit d35c99ff upstream. Since linux-3.15, netlink_dump() can use up to 16384 bytes skb allocations. Due to struct skb_shared_info ~320 bytes overhead, we end up using order-3 (on x86) page allocations, that might trigger direct reclaim and add stress. The intent was really to attempt a large allocation but immediately fallback to a smaller one (order-1 on x86) in case of memory stress. On recent kernels (linux-4.4), we can remove __GFP_DIRECT_RECLAIM to meet the goal. Old kernels would need to remove __GFP_WAIT While we are at it, since we do an order-3 allocation, allow to use all the allocated bytes instead of 16384 to reduce syscalls during large dumps. iproute2 already uses 32KB recvmsg() buffer sizes. Alexei provided an initial patch downsizing to SKB_WITH_OVERHEAD(16384) Fixes: 9063e21f ("netlink: autosize skb lengthes") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Alexei Starovoitov <ast@kernel.org> Cc: Greg Thelen <gthelen@google.com> Reviewed-by:
Greg Rose <grose@lightfleet.com> Acked-by:
-
Johannes Weiner authored
commit 3ddf40e8 upstream. Commit 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") switched replace_page_cache() from raw radix tree operations to page_cache_tree_insert() but didn't take into account that the latter function, unlike the raw radix tree op, handles mapping->nrpages. As a result, that counter is bumped for each page replacement rather than balanced out even. The mapping->nrpages counter is used to skip needless radix tree walks when invalidating, truncating, syncing inodes without pages, as well as statistics for userspace. Since the error is positive, we'll do more page cache tree walks than necessary; we won't miss a necessary one. And we'll report more buffer pages to userspace than there are. The error is limited to fuse inodes. Fixes: 22f2ac51 ("mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()") Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Justin Maggard authored
commit c8475090 upstream. Add missing dmaengine_unmap_put(), so we don't OOM during RAID6 sync. Fixes: 1786b943 ("async_pq_val: convert to dmaengine_unmap_data") Signed-off-by:
Justin Maggard <jmaggard@netgear.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Lu Baolu authored
commit 8dcc5ff8 upstream. Member "status" of struct usb_sg_request is managed by usb core. A spin lock is used to serialize the change of it. The driver could check the value of req->status, but should avoid changing it without the hold of the spinlock. Otherwise, it could cause race or error in usb core. This patch could be backported to stable kernels with version later than v3.14. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Dan Carpenter authored
commit 9a6dc644 upstream. set_bit() and clear_bit() take the bit number so this code is really doing "1 << (1 << irq)" which is a double shift bug. It's done consistently so it won't cause a problem unless "irq" is more than 4. Fixes: 70c6cce0 ('mfd: Support 88pm80x in 80x driver') Signed-off-by:
-
Uwe Kleine-König authored
commit 88003fb1 upstream. This fixes a compile failure: drivers/built-in.o: In function `wm8350_i2c_probe': core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c' Makefile:953: recipe for target 'vmlinux' failed Fixes: 52b461b8 ("mfd: Add regmap cache support for wm8350") Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
-
Gavin Shan authored
commit 5adaf862 upstream. This fixes the warnings reported from sparse: pci.c:312:33: warning: restricted __be64 degrades to integer pci.c:313:33: warning: restricted __be64 degrades to integer Fixes: cee72d5b ("powerpc/powernv: Display diag data on p7ioc EEH errors") Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
