Commits · f0b70cc48cc282cb326a4d71b3d1dda7d8fafd2a · nexedi / linux

10 Jun, 2014 3 commits

tracing: Fix leak of per cpu max data in instances · f0b70cc4

Steven Rostedt (Red Hat) authored Jun 10, 2014

The freeing of an instance, if max data is configured, there will be
per cpu data structures created. But these are not freed when the instance
is deleted, which causes a memory leak.

A new helper function is added that frees the individual buffers within a
trace array, instead of duplicating the code. This way changes made for one
are applied to the other (normal buffer vs max buffer).

Link: http://lkml.kernel.org/r/87k38pbake.fsf@sejong.aot.lge.comReported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

f0b70cc4

tracing: Cleanup saved_cmdlines_size changes · a6af8fbf

Namhyung Kim authored Jun 10, 2014

The recent addition of saved_cmdlines_size file had some remaining
(minor - mostly coding style) issues.  Fix them by passing pointer
name to sizeof() and using scnprintf().

Link: http://lkml.kernel.org/p/1402384295-23680-1-git-send-email-namhyung@kernel.org

Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

a6af8fbf

ring-buffer: Check if buffer exists before polling · 8b8b3683

Steven Rostedt (Red Hat) authored Jun 10, 2014

The per_cpu buffers are created one per possible CPU. But these do
not mean that those CPUs are online, nor do they even exist.

With the addition of the ring buffer polling, it assumes that the
caller polls on an existing buffer. But this is not the case if
the user reads trace_pipe from a CPU that does not exist, and this
causes the kernel to crash.

Simple fix is to check the cpu against buffer bitmask against to see
if the buffer was allocated or not and return -ENODEV if it is
not.

More updates were done to pass the -ENODEV back up to userspace.

Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.comReported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

8b8b3683

07 Jun, 2014 1 commit

tracing: Fix memory leak on instance deletion · a9fcaaac

Steven Rostedt (Red Hat) authored Jun 06, 2014

When an instance is created, it also gets a snapshot ring buffer
allocated (with minimum of pages). But when it is deleted the snapshot
buffer is not. There was a helper function added to match the allocation
of these ring buffers to a way to free them, but it wasn't used by
the deletion of an instance. Using that helper function solves this
memory leak.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

a9fcaaac

06 Jun, 2014 5 commits

tracing: Fix leak of ring buffer data when new instances creation fails · 23aaa3c1

Steven Rostedt (Red Hat) authored Jun 06, 2014

Yoshihiro Yunomae reported that the ring buffer data for a trace
instance does not get properly cleaned up when it fails. He proposed
a patch that manually cleaned the data up and addad a bunch of labels.
The labels are not needed because all trace array is allocated with
a kzalloc which initializes it to 0 and all kfree()s can take a NULL
pointer and will ignore it.

Adding a new helper function free_trace_buffers() that can also take
null buffers to free the buffers that were allocated by
allocate_trace_buffers().

Link: http://lkml.kernel.org/r/20140605223522.32311.31664.stgit@yunodevelReported-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

23aaa3c1

tracing/kprobes: Avoid self tests if tracing is disabled on boot up · 748ec3a2

Yoshihiro YUNOMAE authored Jun 06, 2014

If tracing is disabled on boot up, the kernel should not execute tracing
self tests. The kernel should check whether tracing is disabled or not
before executing any of the tracing self tests.

Link: http://lkml.kernel.org/p/20140605223520.32311.56097.stgit@yunodevelAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

748ec3a2

tracing: Return error if ftrace_trace_arrays list is empty · dc81e5e3

Yoshihiro YUNOMAE authored Jun 06, 2014

ftrace_trace_arrays links global_trace.list. However, global_trace
is not added to ftrace_trace_arrays if trace_alloc_buffers() failed.
As the result, ftrace_trace_arrays becomes an empty list. If
ftrace_trace_arrays is an empty list, current top_trace_array() returns
an invalid pointer. As the result, the kernel can induce memory corruption
or panic.

Current implementation does not check whether ftrace_trace_arrays is empty
list or not. So, in this patch, if ftrace_trace_arrays is empty list,
top_trace_array() returns NULL. Moreover, this patch makes all functions
calling top_trace_array() handle it appropriately.

Link: http://lkml.kernel.org/p/20140605223517.32311.99233.stgit@yunodevelSigned-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

dc81e5e3

tracing: Only calculate stats of tracepoint benchmarks for 2^32 times · 34839f5a

Steven Rostedt (Red Hat) authored Jun 05, 2014

When calculating the average and standard deviation, it is required that
the count be less than UINT_MAX, otherwise the do_div() will get
undefined results. After 2^32 counts of data, the average and standard
deviation should pretty much be set anyway.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

34839f5a

tracing: Convert stddev into u64 in tracepoint benchmark · 72e2fe38

Steven Rostedt (Red Hat) authored Jun 05, 2014

I've been told that do_div() expects an unsigned 64 bit number, and
is undefined if a signed is used. This gave a warning on the MIPS
build. I'm not sure if a signed 64 bit dividend is really an issue
or not, but the calculation this is used for is standard deviation,
and that isn't going to be negative. We can just convert it to
unsigned and be safe.
Reported-by: David Daney <ddaney.cavm@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

72e2fe38

05 Jun, 2014 1 commit

tracing: Introduce saved_cmdlines_size file · 939c7a4f

Yoshihiro YUNOMAE authored Jun 05, 2014

Introduce saved_cmdlines_size file for changing the number of saved pid-comms.
saved_cmdlines currently stores 128 command names using SAVED_CMDLINES, but
'no-existing processes' names are often lost in saved_cmdlines when we
read the trace data. So, by introducing saved_cmdlines_size file, we can
now change the 128 command names saved to something much larger if needed.

When we write a value to saved_cmdlines_size, the number of the value will
be stored in pid-comm list:

	# echo 1024 > /sys/kernel/debug/tracing/saved_cmdlines_size

Here, 1024 command names can be stored. The default number is 128 and the maximum
number is PID_MAX_DEFAULT (=32768 if CONFIG_BASE_SMALL is not set). So, if we
want to avoid losing any command names, we need to set 32768 to
saved_cmdlines_size.

We can read the maximum number of the list:

	# cat /sys/kernel/debug/tracing/saved_cmdlines_size
	128

Link: http://lkml.kernel.org/p/20140605012427.22115.16173.stgit@yunodevelSigned-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

939c7a4f

04 Jun, 2014 2 commits

tracing: Add __get_dynamic_array_len() macro for trace events · beba4bb0

Steven Rostedt (Red Hat) authored Jun 04, 2014

If a trace event uses a dynamic array for something other than a string
then there's currently no way the TP_printk() can figure out what size
it is. A __get_dynamic_array_len() is required to know the length.

This also simplifies the __get_bitmask() macro which required it as well,
but instead just hardcoded it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

beba4bb0

tracing: Remove unused variable in trace_benchmark · 195d2802

Steven Rostedt (Red Hat) authored Jun 04, 2014

Somehow this unused variable warning sneaked past my warnings check
(probably due to it depending on a new config).

kernel/trace/trace_benchmark.c: In function 'trace_do_benchmark':
kernel/trace/trace_benchmark.c:38:6: warning: unused variable 'seedsq' [-Wunused-variable]
  u64 seedsq;
      ^

Link: http://lkml.kernel.org/r/20140604160921.4f4e69c4@canb.auug.org.auReported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

195d2802

03 Jun, 2014 2 commits

tracing: Eliminate double free on failure of allocation on boot up · 198376cd

Yoshihiro YUNOMAE authored Jun 03, 2014

If allocation of the max_buffer fails on boot up, the error path will
free both per_cpu data structures from the buffers. With the new redesign
of the code, those structures are freed if allocations failed. That is,
the helper function that allocates the buffers will free the per cpu data
on failure. No need to do it again. In fact, the second free will cause
a bug as the code can not handle a double free.

Link: http://lkml.kernel.org/p/20140603042803.27308.30956.stgit@yunodevelSigned-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

198376cd

ftrace/x86: Call text_ip_addr() instead of the duplicated code · 964f7b6b

Petr Mladek authored Jun 03, 2014

I just went over this when looking at some Xen-related ftrace initialization
problems. They were related to Xen code that is not upstream but this clean up
would make sense here.

I think that this was already the intention when text_ip_addr() was introduced
in the commit 87fbb2ac (ftrace/x86: Use breakpoints for converting
function graph caller). Anyway, better do it now before it shots people into
their leg ;-)

Link: http://lkml.kernel.org/p/1401812601-2359-1-git-send-email-pmladek@suse.czSigned-off-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

964f7b6b

02 Jun, 2014 1 commit

tracing: Print max callstack on stacktrace bug · e3172181

Minchan Kim authored Jun 02, 2014

While I played with my own feature(ex, something on the way to reclaim),
the kernel would easily oops. I guessed that the reason had to do with
stack overflow and wanted to prove it.

I discovered the stack tracer which proved to be very useful for me but
the kernel would oops before my user program gather the information via
"watch cat /sys/kernel/debug/tracing/stack_trace" so I couldn't get any
message from that. What I needed was to have the stack tracer emit the
kernel stack usage before it does the oops so I could find what was
hogging the stack.

This patch shows the callstack of max stack usage right before an oops so
we can find a culprit.

So, the result is as follows.

[ 1116.522206] init: lightdm main process (1246) terminated with status 1
[ 1119.922916] init: failsafe-x main process (1272) terminated with status 1
[ 3887.728131] kworker/u24:1 (6637) used greatest stack depth: 256 bytes left
[ 6397.629227] cc1 (9554) used greatest stack depth: 128 bytes left
[ 7174.467392]         Depth    Size   Location    (47 entries)
[ 7174.467392]         -----    ----   --------
[ 7174.467785]   0)     7248     256   get_page_from_freelist+0xa7/0x920
[ 7174.468506]   1)     6992     352   __alloc_pages_nodemask+0x1cd/0xb20
[ 7174.469224]   2)     6640       8   alloc_pages_current+0x10f/0x1f0
[ 7174.469413]   3)     6632     168   new_slab+0x2c5/0x370
[ 7174.469413]   4)     6464       8   __slab_alloc+0x3a9/0x501
[ 7174.469413]   5)     6456      80   __kmalloc+0x1cb/0x200
[ 7174.469413]   6)     6376     376   vring_add_indirect+0x36/0x200
[ 7174.469413]   7)     6000     144   virtqueue_add_sgs+0x2e2/0x320
[ 7174.469413]   8)     5856     288   __virtblk_add_req+0xda/0x1b0
[ 7174.469413]   9)     5568      96   virtio_queue_rq+0xd3/0x1d0
[ 7174.469413]  10)     5472     128   __blk_mq_run_hw_queue+0x1ef/0x440
[ 7174.469413]  11)     5344      16   blk_mq_run_hw_queue+0x35/0x40
[ 7174.469413]  12)     5328      96   blk_mq_insert_requests+0xdb/0x160
[ 7174.469413]  13)     5232     112   blk_mq_flush_plug_list+0x12b/0x140
[ 7174.469413]  14)     5120     112   blk_flush_plug_list+0xc7/0x220
[ 7174.469413]  15)     5008      64   io_schedule_timeout+0x88/0x100
[ 7174.469413]  16)     4944     128   mempool_alloc+0x145/0x170
[ 7174.469413]  17)     4816      96   bio_alloc_bioset+0x10b/0x1d0
[ 7174.469413]  18)     4720      48   get_swap_bio+0x30/0x90
[ 7174.469413]  19)     4672     160   __swap_writepage+0x150/0x230
[ 7174.469413]  20)     4512      32   swap_writepage+0x42/0x90
[ 7174.469413]  21)     4480     320   shrink_page_list+0x676/0xa80
[ 7174.469413]  22)     4160     208   shrink_inactive_list+0x262/0x4e0
[ 7174.469413]  23)     3952     304   shrink_lruvec+0x3e1/0x6a0
[ 7174.469413]  24)     3648      80   shrink_zone+0x3f/0x110
[ 7174.469413]  25)     3568     128   do_try_to_free_pages+0x156/0x4c0
[ 7174.469413]  26)     3440     208   try_to_free_pages+0xf7/0x1e0
[ 7174.469413]  27)     3232     352   __alloc_pages_nodemask+0x783/0xb20
[ 7174.469413]  28)     2880       8   alloc_pages_current+0x10f/0x1f0
[ 7174.469413]  29)     2872     200   __page_cache_alloc+0x13f/0x160
[ 7174.469413]  30)     2672      80   find_or_create_page+0x4c/0xb0
[ 7174.469413]  31)     2592      80   ext4_mb_load_buddy+0x1e9/0x370
[ 7174.469413]  32)     2512     176   ext4_mb_regular_allocator+0x1b7/0x460
[ 7174.469413]  33)     2336     128   ext4_mb_new_blocks+0x458/0x5f0
[ 7174.469413]  34)     2208     256   ext4_ext_map_blocks+0x70b/0x1010
[ 7174.469413]  35)     1952     160   ext4_map_blocks+0x325/0x530
[ 7174.469413]  36)     1792     384   ext4_writepages+0x6d1/0xce0
[ 7174.469413]  37)     1408      16   do_writepages+0x23/0x40
[ 7174.469413]  38)     1392      96   __writeback_single_inode+0x45/0x2e0
[ 7174.469413]  39)     1296     176   writeback_sb_inodes+0x2ad/0x500
[ 7174.469413]  40)     1120      80   __writeback_inodes_wb+0x9e/0xd0
[ 7174.469413]  41)     1040     160   wb_writeback+0x29b/0x350
[ 7174.469413]  42)      880     208   bdi_writeback_workfn+0x11c/0x480
[ 7174.469413]  43)      672     144   process_one_work+0x1d2/0x570
[ 7174.469413]  44)      528     112   worker_thread+0x116/0x370
[ 7174.469413]  45)      416     240   kthread+0xf3/0x110
[ 7174.469413]  46)      176     176   ret_from_fork+0x7c/0xb0
[ 7174.469413] ------------[ cut here ]------------
[ 7174.469413] kernel BUG at kernel/trace/trace_stack.c:174!
[ 7174.469413] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 7174.469413] Dumping ftrace buffer:
[ 7174.469413]    (ftrace buffer empty)
[ 7174.469413] Modules linked in:
[ 7174.469413] CPU: 0 PID: 440 Comm: kworker/u24:0 Not tainted 3.14.0+ #212
[ 7174.469413] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 7174.469413] Workqueue: writeback bdi_writeback_workfn (flush-253:0)
[ 7174.469413] task: ffff880034170000 ti: ffff880029518000 task.ti: ffff880029518000
[ 7174.469413] RIP: 0010:[<ffffffff8112336e>]  [<ffffffff8112336e>] stack_trace_call+0x2de/0x340
[ 7174.469413] RSP: 0000:ffff880029518290  EFLAGS: 00010046
[ 7174.469413] RAX: 0000000000000030 RBX: 000000000000002f RCX: 0000000000000000
[ 7174.469413] RDX: 0000000000000000 RSI: 000000000000002f RDI: ffffffff810b7159
[ 7174.469413] RBP: ffff8800295182f0 R08: ffffffffffffffff R09: 0000000000000000
[ 7174.469413] R10: 0000000000000001 R11: 0000000000000001 R12: ffffffff82768dfc
[ 7174.469413] R13: 000000000000f2e8 R14: ffff8800295182b8 R15: 00000000000000f8
[ 7174.469413] FS:  0000000000000000(0000) GS:ffff880037c00000(0000) knlGS:0000000000000000
[ 7174.469413] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 7174.469413] CR2: 00002acd0b994000 CR3: 0000000001c0b000 CR4: 00000000000006f0
[ 7174.469413] Stack:
[ 7174.469413]  0000000000000000 ffffffff8114fdb7 0000000000000087 0000000000001c50
[ 7174.469413]  0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 7174.469413]  0000000000000002 ffff880034170000 ffff880034171028 0000000000000000
[ 7174.469413] Call Trace:
[ 7174.469413]  [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920
[ 7174.469413]  [<ffffffff816eee3f>] ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70
[ 7174.469413]  [<ffffffff810a23fa>] ? __bfs+0x11a/0x270
[ 7174.469413]  [<ffffffff81165065>] ? next_zones_zonelist+0x5/0x70
[ 7174.469413]  [<ffffffff8114fdb7>] ? get_page_from_freelist+0xa7/0x920
[ 7174.469413]  [<ffffffff8119092f>] ? alloc_pages_current+0x10f/0x1f0
[ 7174.469413]  [<ffffffff811507fd>] __alloc_pages_nodemask+0x1cd/0xb20
[ 7174.469413]  [<ffffffff810a4de6>] ? check_irq_usage+0x96/0xe0
[ 7174.469413]  [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0
[ 7174.469413]  [<ffffffff81199cd5>] ? new_slab+0x2c5/0x370
[ 7174.469413]  [<ffffffff81199cd5>] new_slab+0x2c5/0x370
[ 7174.469413]  [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff816db002>] __slab_alloc+0x3a9/0x501
[ 7174.469413]  [<ffffffff8119af8b>] ? __kmalloc+0x1cb/0x200
[ 7174.469413]  [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200
[ 7174.469413]  [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200
[ 7174.469413]  [<ffffffff8141dc46>] ? vring_add_indirect+0x36/0x200
[ 7174.469413]  [<ffffffff8119af8b>] __kmalloc+0x1cb/0x200
[ 7174.469413]  [<ffffffff8141de10>] ? vring_add_indirect+0x200/0x200
[ 7174.469413]  [<ffffffff8141dc46>] vring_add_indirect+0x36/0x200
[ 7174.469413]  [<ffffffff8141e402>] virtqueue_add_sgs+0x2e2/0x320
[ 7174.469413]  [<ffffffff8148e35a>] __virtblk_add_req+0xda/0x1b0
[ 7174.469413]  [<ffffffff8148e503>] virtio_queue_rq+0xd3/0x1d0
[ 7174.469413]  [<ffffffff8134aa0f>] __blk_mq_run_hw_queue+0x1ef/0x440
[ 7174.469413]  [<ffffffff8134b0d5>] blk_mq_run_hw_queue+0x35/0x40
[ 7174.469413]  [<ffffffff8134b7bb>] blk_mq_insert_requests+0xdb/0x160
[ 7174.469413]  [<ffffffff8134be5b>] blk_mq_flush_plug_list+0x12b/0x140
[ 7174.469413]  [<ffffffff81342237>] blk_flush_plug_list+0xc7/0x220
[ 7174.469413]  [<ffffffff816e60ef>] ? _raw_spin_unlock_irqrestore+0x3f/0x70
[ 7174.469413]  [<ffffffff816e16e8>] io_schedule_timeout+0x88/0x100
[ 7174.469413]  [<ffffffff816e1665>] ? io_schedule_timeout+0x5/0x100
[ 7174.469413]  [<ffffffff81149415>] mempool_alloc+0x145/0x170
[ 7174.469413]  [<ffffffff8109baf0>] ? __init_waitqueue_head+0x60/0x60
[ 7174.469413]  [<ffffffff811e246b>] bio_alloc_bioset+0x10b/0x1d0
[ 7174.469413]  [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0
[ 7174.469413]  [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0
[ 7174.469413]  [<ffffffff81184110>] get_swap_bio+0x30/0x90
[ 7174.469413]  [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0
[ 7174.469413]  [<ffffffff81184660>] __swap_writepage+0x150/0x230
[ 7174.469413]  [<ffffffff810ab405>] ? do_raw_spin_unlock+0x5/0xa0
[ 7174.469413]  [<ffffffff81184230>] ? end_swap_bio_read+0xc0/0xc0
[ 7174.469413]  [<ffffffff81184515>] ? __swap_writepage+0x5/0x230
[ 7174.469413]  [<ffffffff81184782>] swap_writepage+0x42/0x90
[ 7174.469413]  [<ffffffff8115ae96>] shrink_page_list+0x676/0xa80
[ 7174.469413]  [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff8115b872>] shrink_inactive_list+0x262/0x4e0
[ 7174.469413]  [<ffffffff8115c1c1>] shrink_lruvec+0x3e1/0x6a0
[ 7174.469413]  [<ffffffff8115c4bf>] shrink_zone+0x3f/0x110
[ 7174.469413]  [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff8115c9e6>] do_try_to_free_pages+0x156/0x4c0
[ 7174.469413]  [<ffffffff8115cf47>] try_to_free_pages+0xf7/0x1e0
[ 7174.469413]  [<ffffffff81150db3>] __alloc_pages_nodemask+0x783/0xb20
[ 7174.469413]  [<ffffffff8119092f>] alloc_pages_current+0x10f/0x1f0
[ 7174.469413]  [<ffffffff81145c0f>] ? __page_cache_alloc+0x13f/0x160
[ 7174.469413]  [<ffffffff81145c0f>] __page_cache_alloc+0x13f/0x160
[ 7174.469413]  [<ffffffff81146c6c>] find_or_create_page+0x4c/0xb0
[ 7174.469413]  [<ffffffff811463e5>] ? find_get_page+0x5/0x130
[ 7174.469413]  [<ffffffff812837b9>] ext4_mb_load_buddy+0x1e9/0x370
[ 7174.469413]  [<ffffffff81284c07>] ext4_mb_regular_allocator+0x1b7/0x460
[ 7174.469413]  [<ffffffff81281070>] ? ext4_mb_use_preallocated+0x40/0x360
[ 7174.469413]  [<ffffffff816eee3f>] ? ftrace_call+0x5/0x2f
[ 7174.469413]  [<ffffffff81287eb8>] ext4_mb_new_blocks+0x458/0x5f0
[ 7174.469413]  [<ffffffff8127d83b>] ext4_ext_map_blocks+0x70b/0x1010
[ 7174.469413]  [<ffffffff8124e6d5>] ext4_map_blocks+0x325/0x530
[ 7174.469413]  [<ffffffff81253871>] ext4_writepages+0x6d1/0xce0
[ 7174.469413]  [<ffffffff812531a0>] ? ext4_journalled_write_end+0x330/0x330
[ 7174.469413]  [<ffffffff811539b3>] do_writepages+0x23/0x40
[ 7174.469413]  [<ffffffff811d2365>] __writeback_single_inode+0x45/0x2e0
[ 7174.469413]  [<ffffffff811d36ed>] writeback_sb_inodes+0x2ad/0x500
[ 7174.469413]  [<ffffffff811d39de>] __writeback_inodes_wb+0x9e/0xd0
[ 7174.469413]  [<ffffffff811d40bb>] wb_writeback+0x29b/0x350
[ 7174.469413]  [<ffffffff81057c3d>] ? __local_bh_enable_ip+0x6d/0xd0
[ 7174.469413]  [<ffffffff811d6e9c>] bdi_writeback_workfn+0x11c/0x480
[ 7174.469413]  [<ffffffff81070610>] ? process_one_work+0x170/0x570
[ 7174.469413]  [<ffffffff81070672>] process_one_work+0x1d2/0x570
[ 7174.469413]  [<ffffffff81070610>] ? process_one_work+0x170/0x570
[ 7174.469413]  [<ffffffff81071bb6>] worker_thread+0x116/0x370
[ 7174.469413]  [<ffffffff81071aa0>] ? manage_workers.isra.19+0x2e0/0x2e0
[ 7174.469413]  [<ffffffff81078e53>] kthread+0xf3/0x110
[ 7174.469413]  [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150
[ 7174.469413]  [<ffffffff816ef0ec>] ret_from_fork+0x7c/0xb0
[ 7174.469413]  [<ffffffff81078d60>] ? flush_kthread_worker+0x150/0x150
[ 7174.469413] Code: c0 49 bc fc 8d 76 82 ff ff ff ff e8 44 5a 5b 00 31 f6 8b 05 95 2b b3 00 48 39 c6 7d 0e 4c 8b 04 f5 20 5f c5 81 49 83 f8 ff 75 11 <0f> 0b 48 63 05 71 5a 64 01 48 29 c3 e9 d0 fd ff ff 48 8d 5e 01
[ 7174.469413] RIP  [<ffffffff8112336e>] stack_trace_call+0x2de/0x340
[ 7174.469413]  RSP <ffff880029518290>
[ 7174.469413] ---[ end trace c97d325b36b718f3 ]---

Link: http://lkml.kernel.org/p/1401683592-1651-1-git-send-email-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

e3172181

30 May, 2014 5 commits

tracing: Move locking of trace_cmdline_lock into start/stop seq calls · 4c27e756

Steven Rostedt (Red Hat) authored May 30, 2014

With the conversion of the saved_cmdlines output to use seq_read, there
is now a race between accessing the values of the saved_cmdlines and
the writing to them. The trace_cmdline_lock needs to be taken at
the start and stop of the seq calls.

A new __trace_find_cmdline() call is created to allow for the look up
to happen without taking the lock.

Fixes: 42584c81 tracing: Have saved_cmdlines use the seq_read infrastructure
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

4c27e756

tracing: Try again for saved cmdline if failed due to locking · 379cfdac

Steven Rostedt (Red Hat) authored May 30, 2014

In order to prevent the saved cmdline cache from being filled when
tracing is not active, the comms are only recorded after a trace event
is recorded.

The problem is, a comm can fail to be recorded if the trace_cmdline_lock
is held. That lock is taken via a trylock to allow it to happen from
any context (including NMI). If the lock fails to be taken, the comm
is skipped. No big deal, as we will try again later.

But! Because of the code that was added to only record after an event,
we may not try again later as the recording is made as a oneshot per
event per CPU.

Only disable the recording of the comm if the comm is actually recorded.

Fixes: 7ffbd48d "tracing: Cache comms only after an event occurred"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

379cfdac

tracing: Have saved_cmdlines use the seq_read infrastructure · 42584c81

Yoshihiro YUNOMAE authored Feb 20, 2014

Current tracing_saved_cmdlines_read() implementation is naive; It allocates
a large buffer, constructs output data to that buffer for each read
operation, and then copies a portion of the buffer to the user space
buffer. This has several issues such as slow memory allocation, high
CPU usage, and even corruption of the output data.

The seq_read infrastructure is made to handle this type of work.
By converting it to use seq_read() the code becomes smaller, simplified,
as well as correct.

Link: http://lkml.kernel.org/p/20140220084431.3839.51793.stgit@yunodevelSigned-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Yoshihiro YUNOMAE <yoshihiro.yunomae.ez@hitachi.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

42584c81

tracing: Add tracepoint benchmark tracepoint · 81dc9f0e

Steven Rostedt (Red Hat) authored May 29, 2014

In order to help benchmark the time tracepoints take, a new config
option is added called CONFIG_TRACEPOINT_BENCHMARK. When this option
is set a tracepoint is created called "benchmark:benchmark_event".
When the tracepoint is enabled, it kicks off a kernel thread that
goes into an infinite loop (calling cond_sched() to let other tasks
run), and calls the tracepoint. Each iteration will record the time
it took to write to the tracepoint and the next iteration that
data will be passed to the tracepoint itself. That is, the tracepoint
will report the time it took to do the previous tracepoint.
The string written to the tracepoint is a static string of 128 bytes
to keep the time the same. The initial string is simply a write of
"START". The second string records the cold cache time of the first
write which is not added to the rest of the calculations.

As it is a tight loop, it benchmarks as hot cache. That's fine because
we care most about hot paths that are probably in cache already.

An example of the output:

     START
     first=3672 [COLD CACHED]
     last=632 first=3672 max=632 min=632 avg=316 std=446 std^2=199712
     last=278 first=3672 max=632 min=278 avg=303 std=316 std^2=100337
     last=277 first=3672 max=632 min=277 avg=296 std=258 std^2=67064
     last=273 first=3672 max=632 min=273 avg=292 std=224 std^2=50411
     last=273 first=3672 max=632 min=273 avg=288 std=200 std^2=40389
     last=281 first=3672 max=632 min=273 avg=287 std=183 std^2=33666
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

81dc9f0e

tracing: Print nasty banner when trace_printk() is in use · 2184db46

Steven Rostedt authored May 28, 2014

trace_printk() is used to debug fast paths within the kernel. Places
that gets called in any context (interrupt or NMI) or thousands of
times a second. Something you do not want to do with a printk().

In order to make it completely lockless as it needs a temporary buffer
to handle some of the string formatting, a page is created per cpu for
every context (four per cpu; normal, softirq, irq, NMI).

Since trace_printk() should only be used for debugging purposes,
there's no reason to waste memory on these buffers on a production
system. That means, trace_printk() should never be used unless a
developer is debugging their kernel. There's macro magic to allocate
the buffers if trace_printk() is used anywhere in the kernel.

To help enforce that trace_printk() isn't used outside of development,
when it is used, a nasty banner is displayed on bootup (or when a module
is loaded that uses trace_printk() and the kernel core does not).

Here's the banner:

**********************************************************
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
** **
** trace_printk() being used. Allocating extra memory. **
** **
** This means that this is a DEBUG kernel and it is **
** unsafe for produciton use. **
** **
** If you see this message and you are not debugging **
** the kernel, report this immediately to your vendor! **
** **
** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
**********************************************************

That should hopefully keep developers from trying to sneak in a
trace_printk() or two.

Link: http://lkml.kernel.org/p/20140528131440.2283213c@gandalf.local.homeSigned-off-by: Steven Rostedt <rostedt@goodmis.org>

2184db46

21 May, 2014 2 commits

tracing: Add funcgraph_tail option to print function name after closing braces · 607e3a29

Robert Elliott authored May 20, 2014

In the function-graph tracer, add a funcgraph_tail option
to print the function name on all } lines, not just
functions whose first line is no longer in the trace
buffer.

If a function calls other traced functions, its total
time appears on its } line.  This change allows grep
to be used to determine the function for which the
line corresponds.

Update Documentation/trace/ftrace.txt to describe
this new option.

Link: http://lkml.kernel.org/p/20140520221041.8359.6782.stgit@beardog.cce.hp.comSigned-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

607e3a29

tracing: Eliminate duplicate TRACE_GRAPH_PRINT_xx defines · ccdb5946

Robert Elliott authored May 20, 2014

Eliminate duplicate TRACE_GRAPH_PRINT_xx defines
in trace_functions_graph.c that are already in
trace.h.

Add TRACE_GRAPH_PRINT_IRQS to trace.h, which is
the only one that is missing.

Link: http://lkml.kernel.org/p/20140520221031.8359.24733.stgit@beardog.cce.hp.comSigned-off-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ccdb5946

15 May, 2014 1 commit

tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks · 4449bf92

Steven Rostedt (Red Hat) authored May 06, 2014

Being able to show a cpumask of events can be useful as some events
may affect only some CPUs. There is no standard way to record the
cpumask and converting it to a string is rather expensive during
the trace as traces happen in hotpaths. It would be better to record
the raw event mask and be able to parse it at print time.

The following macros were added for use with the TRACE_EVENT() macro:

  __bitmask()
  __assign_bitmask()
  __get_bitmask()

To test this, I added this to the sched_migrate_task event, which
looked like this:

TRACE_EVENT(sched_migrate_task,

	TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus),

	TP_ARGS(p, dest_cpu, cpus),

	TP_STRUCT__entry(
		__array(	char,	comm,	TASK_COMM_LEN	)
		__field(	pid_t,	pid			)
		__field(	int,	prio			)
		__field(	int,	orig_cpu		)
		__field(	int,	dest_cpu		)
		__bitmask(	cpumask, num_possible_cpus()	)
	),

	TP_fast_assign(
		memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
		__entry->pid		= p->pid;
		__entry->prio		= p->prio;
		__entry->orig_cpu	= task_cpu(p);
		__entry->dest_cpu	= dest_cpu;
		__assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus());
	),

	TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s",
		  __entry->comm, __entry->pid, __entry->prio,
		  __entry->orig_cpu, __entry->dest_cpu,
		  __get_bitmask(cpumask))
);

With the output of:

        ksmtuned-3613  [003] d..2   485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f
     migration/1-13    [001] d..5   485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f
             awk-3615  [002] d.H5   485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff
     migration/2-18    [002] d..5   485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f

Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com
Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.homeSuggested-by: Javi Merino <javi.merino@arm.com>
Tested-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

4449bf92

14 May, 2014 8 commits

ftrace/x86: Move the mcount/fentry code out of entry_64.S · e18eead3

Steven Rostedt authored May 08, 2014

As the mcount code gets more complex, it really does not belong
in the entry.S file. By moving it into its own file "mcount.S"
keeps things a bit cleaner.

Link: http://lkml.kernel.org/p/20140508152152.2130e8cf@gandalf.local.homeAcked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

e18eead3

ftrace: Remove FTRACE_UPDATE_MODIFY_CALL_REGS flag · f1b2f2bd

Steven Rostedt (Red Hat) authored May 07, 2014

As the decision to what needs to be done (converting a call to the
ftrace_caller to ftrace_caller_regs or to convert from ftrace_caller_regs
to ftrace_caller) can easily be determined from the rec->flags of
FTRACE_FL_REGS and FTRACE_FL_REGS_EN, there's no need to have the
ftrace_check_record() return either a UPDATE_MODIFY_CALL_REGS or a
UPDATE_MODIFY_CALL. Just he latter is enough. This added flag causes
more complexity than is required. Remove it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

f1b2f2bd

ftrace: Use the ftrace_addr helper functions to find the ftrace_addr · 7c0868e0

Steven Rostedt (Red Hat) authored May 08, 2014

With the moving of the functions that determine what the mcount call site
should be replaced with into the generic code, there is a few places
in the generic code that can use them instead of hard coding it as it
does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

7c0868e0

ftrace: Make get_ftrace_addr() and get_ftrace_addr_old() global · 7413af1f

Steven Rostedt (Red Hat) authored May 06, 2014

Move and rename get_ftrace_addr() and get_ftrace_addr_old() to
ftrace_get_addr_new() and ftrace_get_addr_curr() respectively.

This moves these two helper functions in the generic code out from
the arch specific code, and renames them to have a better generic
name. This will allow other archs to use them as well as makes it
a bit easier to work on getting separate trampolines for different
functions.

ftrace_get_addr_new() returns the trampoline address that the mcount
call address will be converted to.

ftrace_get_addr_curr() returns the trampoline address of what the
mcount call address currently jumps to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

7413af1f

ftrace/x86: Get the current mcount addr for add_breakpoint() · 94792ea0

Steven Rostedt (Red Hat) authored May 06, 2014

The add_breakpoint() code in the ftrace updating gets the address
of what the call will become, but if the mcount address is changing
from regs to non-regs ftrace_caller or vice versa, it will use what
the record currently is.

This is rather silly as the code should always use what is currently
there regardless of if it's changing the regs function or just converting
to a nop.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

94792ea0

ftrace: Always inline ftrace_hash_empty() helper function · 68f40969

Steven Rostedt (Red Hat) authored May 01, 2014

The ftrace_hash_empty() function is a simple test:

	return !hash || !hash->count;

But gcc seems to want to make it a call. As this is in an extreme
hot path of the function tracer, there's no reason it needs to be
a call. I only wrote it to be a helper function anyway, otherwise
it would have been inlined manually.

Force gcc to inline it, as it could have also been a macro.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

68f40969

ftrace: Write in missing comment from a very old commit · 19eab4a4

Steven Rostedt (Red Hat) authored May 07, 2014

Back in 2011 Commit ed926f9b "ftrace: Use counters to enable
functions to trace" changed the way ftrace accounts for enabled
and disabled traced functions. There was a comment started as:

	/*
	 *
	 */

But never finished. Well, that's rather useless. I probably forgot
to save the file before committing it. And it passed review from all
this time.

Anyway, better late than never. I updated the comment to express what
is happening in that somewhat complex code.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

19eab4a4

ftrace: Remove boolean of hash_enable and hash_disable · 66209a5b

Steven Rostedt (Red Hat) authored May 06, 2014

Commit 4104d326 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler, but it left a variable "hash_enable" that was used
to know if the hash functions should be updated or not. It was
updated if the global_ops did not override them. As the global_ops
are now no different than any other ftrace_ops, the hash always
gets updated and there's no reason to use the hash_enable boolean.

The same goes for hash_disable used in ftrace_shutdown().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

66209a5b

07 May, 2014 1 commit

tracing: Add trace_<tracepoint>_enabled() function · 7c65bbc7

Steven Rostedt (Red Hat) authored May 06, 2014

There are some code paths in the kernel that need to do some preparations
before it calls a tracepoint. As that code is worthless overhead when
the tracepoint is not enabled, it would be prudent to have that code
only run when the tracepoint is active. To accomplish this, all tracepoints
now get a static inline function called "trace_<tracepoint-name>_enabled()"
which returns true when the tracepoint is enabled and false otherwise.

As an added bonus, that function uses the static_key of the tracepoint
such that no branch is needed.

  if (trace_mytracepoint_enabled()) {
	arg = process_tp_arg();
	trace_mytracepoint(arg);
  }

Will keep the "process_tp_arg()" (which may be expensive to run) from
being executed when the tracepoint isn't enabled.

It's best to encapsulate the tracepoint itself in the if statement
just to keep races. For example, if you had:

  if (trace_mytracepoint_enabled())
	arg = process_tp_arg();
  trace_mytracepoint(arg);

There's a chance that the tracepoint could be enabled just after the
if statement, and arg will be undefined when calling the tracepoint.

Link: http://lkml.kernel.org/r/20140506094407.507b6435@gandalf.local.homeAcked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

7c65bbc7

06 May, 2014 1 commit

tracing: Replace __get_cpu_var uses with this_cpu_ptr · bdffd893

Christoph Lameter authored Apr 29, 2014

Replace uses of &__get_cpu_var for address calculation with this_cpu_ptr.

Link: http://lkml.kernel.org/p/alpine.DEB.2.10.1404291415560.18364@gentwo.orgAcked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

bdffd893

05 May, 2014 1 commit

tracing: Remove myself as a tracing maintainer · 3415c28c

Frederic Weisbecker authored May 03, 2014

It has been a while since I last sent a tracing patch. I always keep an
eye on tracing evolutions and contributions in general but given
how busy I am with nohz, isolation and more generally core cleanups stuff,
I seldom have time left to provide deep reviews of tracing patches nor
simply for reviews to begin with.

I've been very lucky to start kernel development on a very young subsystem
with tons of low hanging fruits back in 2008. Given that it deals with
a lot of tricky stuffs all around (sched, timers, irq, preemption, NMIs,
SMP, RCU, ....) I basically learned everything there.

Steve has been doing most of the incredible work these last years.
Thanks a lot!

Of course consider me always available to help on tracing if any hard
days happen.

Link: http://lkml.kernel.org/p/1399131991-13216-1-git-send-email-fweisbec@gmail.com

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

3415c28c

02 May, 2014 1 commit

ftrace: Have function graph tracer use global_ops for filtering · fd06a549

Steven Rostedt (Red Hat) authored May 01, 2014

Commit 4104d326 "ftrace: Remove global function list and call
function directly" cleaned up the global_ops filtering and made
the code simpler. But it left out function graph filtering which
also depended on that code. The function graph filtering still
needs to use global_ops as the filter otherwise it wont filter
at all.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

fd06a549

30 Apr, 2014 1 commit

tracing: Remove mock up poll wait function · b1169cc6

Steven Rostedt (Red Hat) authored Apr 29, 2014

Now that the ring buffer has a built in way to wake up readers
when there's data, using irq_work such that it is safe to do it
in any context. But it was still using the old "poor man's"
wait polling that checks every 1/10 of a second to see if it
should wake up a waiter. This makes the latency for a wake up
excruciatingly long. No need to do that anymore.

Completely remove the different wait_poll types from the tracers
and have them all use the default one now.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

b1169cc6

29 Apr, 2014 1 commit

tracing: Break out of tracing_wait_pipe() before wait_pipe() is called · f4874261

Steven Rostedt (Red Hat) authored Apr 29, 2014

When reading from trace_pipe, if tracing is off but nothing was read
it should block. If something is read and tracing is off, then EOF
is returned. If tracing is on and there's nothing to read, it will block.

But because the check of whether tracing is off and something was read
is done after the block on the pipe, it is hit or miss if the EOF is
returned or not leading to inconsistent behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

f4874261

24 Apr, 2014 2 commits

tracing: Fix documentation of ftrace_set_global_{filter,notrace}() · 8d1b065d

Jiaxing Wang authored Apr 20, 2014

The functions ftrace_set_global_filter() and ftrace_set_global_notrace()
still have their old names in the kernel doc (ftrace_set_filter and
ftrace_set_notrace respectively). Replace these with the real names.

Link: http://lkml.kernel.org/p/1398006644-5935-3-git-send-email-wangjiaxing@insigma.com.cnSigned-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

8d1b065d

tracing/stack_trace: Skip 4 instead of 3 when using ftrace_ops_list_func · 7eea4fce

Jiaxing Wang authored Apr 20, 2014

When using ftrace_ops_list_func, we should skip 4 instead of 3,
to avoid ftrace_call+0x5/0xb appearing in the stack trace:

        Depth    Size   Location    (110 entries)
        -----    ----   --------
  0)     2956       0   update_curr+0xe/0x1e0
  1)     2956      68   ftrace_call+0x5/0xb
  2)     2888      92   enqueue_entity+0x53/0xe80
  3)     2796      80   enqueue_task_fair+0x47/0x7e0
  4)     2716      28   enqueue_task+0x45/0x70
  5)     2688      12   activate_task+0x22/0x30

Add a function using_ftrace_ops_list_func() to test for this while keeping
ftrace_ops_list_func to remain static.

Link: http://lkml.kernel.org/p/1398006644-5935-2-git-send-email-wangjiaxing@insigma.com.cnSigned-off-by: Jiaxing Wang <wangjiaxing@insigma.com.cn>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

7eea4fce

21 Apr, 2014 1 commit

tracing: Add static to local functions · ad1438a0

Fabian Frederick authored Apr 17, 2014

This patch adds static to the following functions:
-cycle_t buffer_ftrace_now
-void free_snapshot
-int trace_selftest_startup_dynamic_tracing

Link: http://lkml.kernel.org/p/20140417214442.d7abc7c0b0e4b90e7fedecc9@skynet.beSigned-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ad1438a0