- 05 Feb, 2020 40 commits
-
-
Cambda Zhu authored
[ Upstream commit 4fad78ad ] This patch fixes the calculation of queue when we restore flow director filters after resetting adapter. In ixgbe_fdir_filter_restore(), filter's vf may be zero which makes the queue outside of the rx_ring array. The calculation is changed to the same as ixgbe_add_ethtool_fdir_entry(). Signed-off-by:
Cambda Zhu <cambda@linux.alibaba.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Radoslaw Tyl authored
[ Upstream commit aa604651 ] Currently, though the FDB entry is added to VF, it does not appear in RAR filters. VF driver only allows to add 10 entries. Attempting to add another causes an error. This patch removes limitation and allows use of all free RAR entries for the FDB if needed. Fixes: 46ec20ff ("ixgbevf: Add macvlan support in the set rx mode op") Signed-off-by:
Radoslaw Tyl <radoslawx.tyl@intel.com> Acked-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
-
Lubomir Rintel authored
[ Upstream commit 8bea5ac0 ] Determined empirically, no documentation is available. The OLPC XO-1.75 laptop used parent 1, that one being VCTCXO/4 (65MHz), but thought it's a VCTCXO/2 (130MHz). The mmp2 timer driver, not knowing what is going on, ended up just dividing the rate as of commit f36797ee ("ARM: mmp/mmp2: dt: enable the clock")' Link: https://lore.kernel.org/r/20191218190454.420358-3-lkundrak@v3.skSigned-off-by:
Lubomir Rintel <lkundrak@v3.sk> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Markus Theil authored
[ Upstream commit 02a61449 ] The following warning is triggered every time an unestablished mesh peer gets dumped. Checks if a peer link is established before retrieving the airtime link metric. [ 9563.022567] WARNING: CPU: 0 PID: 6287 at net/mac80211/mesh_hwmp.c:345 airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022697] Hardware name: PC Engines apu2/apu2, BIOS v4.10.0.3 [ 9563.022756] RIP: 0010:airtime_link_metric_get+0xa2/0xb0 [mac80211] [ 9563.022838] Call Trace: [ 9563.022897] sta_set_sinfo+0x936/0xa10 [mac80211] [ 9563.022964] ieee80211_dump_station+0x6d/0x90 [mac80211] [ 9563.023062] nl80211_dump_station+0x154/0x2a0 [cfg80211] [ 9563.023120] netlink_dump+0x17b/0x370 [ 9563.023130] netlink_recvmsg+0x2a4/0x480 [ 9563.023140] ____sys_recvmsg+0xa6/0x160 [ 9563.023154] ___sys_recvmsg+0x93/0xe0 [ 9563.023169] __sys_recvmsg+0x7e/0xd0 [ 9563.023210] do_syscall_64+0x4e/0x140 [ 9563.023217] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191203180644.70653-1-markus.theil@tu-ilmenau.de [rewrite commit message] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Dave Gerlach authored
[ Upstream commit 03729cfa ] Any user of wkup_m3_ipc calls wkup_m3_ipc_get to get a handle and this checks the value of the static variable m3_ipc_state to see if the wkup_m3 is ready. Currently this is populated during probe before rproc_boot has been called, meaning there is a window of time that wkup_m3_ipc_get can return a valid handle but the wkup_m3 itself is not ready, leading to invalid IPC calls to the wkup_m3 and system instability. To avoid this, move the population of the m3_ipc_state variable until after rproc_boot has succeeded to guarantee a valid and usable handle is always returned. Reported-by:
Suman Anna <s-anna@ti.com> Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Kishon Vijay Abraham I authored
[ Upstream commit e17e7c49 ] On am57xx-beagle-x15, 5V0 is connected to P16, P17, P18 and P19 connectors. On am57xx-evm, 5V0 regulator is used to get 3V6 regulator which is connected to the COMQ port. Model 5V0 regulator here in order for it to be used in am57xx-evm to model 3V6 regulator. Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Lee Jones authored
A pointer to 'struct si470x_device' is currently used after free: drivers/media/radio/si470x/radio-si470x-i2c.c:462:25-30: ERROR: reference preceded by free on line 460 Shift the call to free() down past its final use. NB: Not sending to Mainline, since the problem does not exist there, it was caused by the backport of 2df200ab ("media: si470x-i2c: add missed operations in remove") to the stable trees. Cc: <stable@vger.kernel.org> # v3.18+ Reported-by:kbuild test robot <lkp@intel.com> Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bin Liu authored
[ Upstream commit 09ed259f ] VBUS should be turned off when leaving the host mode. Set GCTL_PRTCAP to device mode in teardown to de-assert DRVVBUS pin to turn off VBUS power. Fixes: 5f94adfe ("usb: dwc3: core: refactor mode initialization to its own function") Cc: stable@vger.kernel.org Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 11eb85ec upstream. Syzbot managed to trigger a use after free "KASAN: use-after-free Write in hci_sock_bind". I have reviewed the code manually and one possibly cause I have found is that we are not holding lock_sock(sk) when we do the hci_dev_put(hdev) in hci_sock_release(). My theory is that the bind and the release are racing against each other which results in this use after free. Reported-by: syzbot+eba992608adf3d796bcc@syzkaller.appspotmail.com Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Zhenzhong Duan authored
commit 9a655c77 upstream. tpk_write()/tpk_close() could be interrupted when holding a mutex, then in timer handler tpk_write() may be called again trying to acquire same mutex, lead to deadlock. Google syzbot reported this issue with CONFIG_DEBUG_ATOMIC_SLEEP enabled: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:938 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/1 1 lock held by swapper/1/0: ... Call Trace: <IRQ> dump_stack+0x197/0x210 ___might_sleep.cold+0x1fb/0x23e __might_sleep+0x95/0x190 __mutex_lock+0xc5/0x13c0 mutex_lock_nested+0x16/0x20 tpk_write+0x5d/0x340 resync_tnc+0x1b6/0x320 call_timer_fn+0x1ac/0x780 run_timer_softirq+0x6c3/0x1790 __do_softirq+0x262/0x98c irq_exit+0x19b/0x1e0 smp_apic_timer_interrupt+0x1a3/0x610 apic_timer_interrupt+0xf/0x20 </IRQ> See link https://syzkaller.appspot.com/bug?extid=2eeef62ee31f9460ad65 for more details. Fix it by using spinlock in process context instead of mutex and having interrupt disabled in critical section. Reported-by: syzbot+2eeef62ee31f9460ad65@syzkaller.appspotmail.com Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20200113034842.435-1-zhenzhong.duan@gmail.comSigned-off-by:
-
Hans Verkuil authored
commit 569bc8d6 upstream. This fixes a syzbot failure since actlen could be uninitialized, but it was still used. Syzbot link: https://syzkaller.appspot.com/bug?extid=6bf9606ee955b646c0e1 Reported-and-tested-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Hans Verkuil authored
commit de89d086 upstream. Allocate gspca_dev->usb_buf with kzalloc instead of kmalloc to ensure it is property zeroed. This fixes various syzbot errors about uninitialized data. Syzbot links: https://syzkaller.appspot.com/bug?extid=32310fc2aea76898d074 https://syzkaller.appspot.com/bug?extid=99706d6390be1ac542a2 https://syzkaller.appspot.com/bug?extid=64437af5c781a7f0e08e Reported-and-tested-by: syzbot+32310fc2aea76898d074@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+99706d6390be1ac542a2@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+64437af5c781a7f0e08e@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit 51d0c99b upstream. If usb_bulk_msg() fails, actual_length can be uninitialized. Reported-by: syzbot+9d42b7773d2fecd983ab@syzkaller.appspotmail.com Signed-off-by:
-
Sean Young authored
commit eecc70d2 upstream. This results in an uninitialized variable read. Reported-by: syzbot+6bf9606ee955b646c0e1@syzkaller.appspotmail.com Signed-off-by:
-
Jan Kara authored
commit 5474ca7d upstream. When a filesystem is mounted with jdev mount option, we store the journal device name in an allocated string in superblock. However we fail to ever free that string. Fix it. Reported-by: syzbot+1c6756baf4b16b94d2a6@syzkaller.appspotmail.com Fixes: c3aa0776 ("reiserfs: Properly display mount options in /proc/mounts") CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dan Carpenter authored
commit c7a91bc7 upstream. What we are trying to do is change the '=' character to a NUL terminator and then at the end of the function we restore it back to an '='. The problem is there are two error paths where we jump to the end of the function before we have replaced the '=' with NUL. We end up putting the '=' in the wrong place (possibly one element before the start of the buffer). Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com Fixes: 095f1fc4 ("mempolicy: rework shmem mpol parsing and display") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dirk Behme authored
commit d7bbd6c1 upstream. Since v4.3-rc1 commit 0723c05f ("arm64: enable more compressed Image formats"), it is possible to build Image.{bz2,lz4,lzma,lzo} AArch64 images. However, the commit missed adding support for removing those images on 'make ARCH=arm64 (dist)clean'. Fix this by adding them to the target list. Make sure to match the order of the recipes in the makefile. Cc: stable@vger.kernel.org # v4.3+ Fixes: 0723c05f ("arm64: enable more compressed Image formats") Signed-off-by:
Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Vitaly Chikunov authored
commit 6c4798d3 upstream. Disable a couple of compilation warnings (which are treated as errors) on strlcpy() definition and declaration, allowing users to compile perf and kernel (objtool) when: 1. glibc have strlcpy() (such as in ALT Linux since 2004) objtool and perf build fails with this (in gcc): In file included from exec-cmd.c:3: tools/include/linux/string.h:20:15: error: redundant redeclaration of ‘strlcpy’ [-Werror=redundant-decls] 20 | extern size_t strlcpy(char *dest, const char *src, size_t size); 2. clang ignores `-Wredundant-decls', but produces another warning when building perf: CC util/string.o ../lib/string.c:99:8: error: attribute declaration must precede definition [-Werror,-Wignored-attributes] size_t __weak strlcpy(char *dest, const char *src, size_t size) ../../tools/include/linux/compiler.h:66:34: note: expanded from macro '__weak' # define __weak __attribute__((weak)) /usr/include/bits/string_fortified.h:151:8: note: previous definition is here __NTH (strlcpy (char *__restrict __dest, const char *__restrict __src, Committer notes: The #pragma GCC diagnostic directive was introduced in gcc 4.6, so check for that as well. Fixes: ce990917 ("perf tools: Move strlcpy() from perf to tools/lib/string.c") Fixes: 0215d59b ("tools lib: Reinstate strlcpy() header guard with __UCLIBC__") Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=118481Signed-off-by:
Vitaly Chikunov <vt@altlinux.org> Reviewed-by:
Dmitry Levin <ldv@altlinux.org> Cc: Dmitry Levin <ldv@altlinux.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: kbuild test robot <lkp@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Link: http://lore.kernel.org/lkml/20191224172029.19690-1-vt@altlinux.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit 45a4e422 ] Add proper support for L3GD20H gyroscope sensor. In particular: - use L3GD20H as device name instead of L3GD20 - fix available full scales - fix available sample frequencies Note that the original patch listed first below introduced broken support for this part. The second patch drops the support as it didn't work. This new patch brings in working support. Fixes: 9444a300 (IIO: Add support for L3GD20H gyroscope) Fixes: a0657716 ("iio:gyro: bug on L3GD20H gyroscope support") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit d8594fa2 ] We have #defines for all the individual sensor registers and value/mask pairs #defined at the top of the file and used at exactly one spot. This is usually good if the #defines give a meaning to the opaque magic numbers. However in this case, the semantic meaning is inherent in the name of the C99-addressable fields, and that means duplication of information, and only makes the code hard to maintain since you every time have to add a new #define AND update the site where it is to be used. Get rid of the #defines and just open code the values into the appropriate struct elements. Make sure to explicitly address the .hz and .value fields in the st_sensor_odr_avl struct so that the meaning of all values is clear. This patch is purely syntactic should have no semantic effect. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 07bfd9bd ] On module unload of pcrypt we must unregister the crypto algorithms first and then tear down the padata structure. As otherwise the crypto algorithms are still alive and can be used while the padata structure is being freed. Fixes: 5068c7a8 ("crypto: pcrypt - Add pcrypt crypto...") Cc: <stable@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Al Viro authored
commit 6404674a upstream. Brown paperbag time: fetching ->i_uid/->i_mode really should've been done from nd->inode. I even suggested that, but the reason for that has slipped through the cracks and I went for dir->d_inode instead - made for more "obvious" patch. Analysis: - at the entry into do_last() and all the way to step_into(): dir (aka nd->path.dentry) is known not to have been freed; so's nd->inode and it's equal to dir->d_inode unless we are already doomed to -ECHILD. inode of the file to get opened is not known. - after step_into(): inode of the file to get opened is known; dir might be pointing to freed memory/be negative/etc. - at the call of may_create_in_sticky(): guaranteed to be out of RCU mode; inode of the file to get opened is known and pinned; dir might be garbage. The last was the reason for the original patch. Except that at the do_last() entry we can be in RCU mode and it is possible that nd->path.dentry->d_inode has already changed under us. In that case we are going to fail with -ECHILD, but we need to be careful; nd->inode is pointing to valid struct inode and it's the same as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we should use that. Reported-by:
"Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com> Reported-by: syzbot+190005201ced78a74ad6@syzkaller.appspotmail.com Wearing-brown-paperbag: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@kernel.org Fixes: d0cb5018 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late") Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Herbert Xu authored
commit 37f96694 upstream. As af_alg_release_parent may be called from BH context (most notably due to an async request that only completes after socket closure, or as reported here because of an RCU-delayed sk_destruct call), we must use bh_lock_sock instead of lock_sock. Reported-by: syzbot+c2f1558d49e25cc36e5e@syzkaller.appspotmail.com Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: c840ac6a ("crypto: af_alg - Disallow bind/setkey/...") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 55cd9f67 ] It is possible for malicious userspace to set TCF_EM_SIMPLE bit even for matches that should not have this bit set. This can fool two places using tcf_em_is_simple() 1) tcf_em_tree_destroy() -> memory leak of em->data if ops->destroy() is NULL 2) tcf_em_tree_dump() wrongly report/leak 4 low-order bytes of a kernel pointer. BUG: memory leak unreferenced object 0xffff888121850a40 (size 32): comm "syz-executor927", pid 7193, jiffies 4294941655 (age 19.840s) hex dump (first 32 bytes): 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f67036ea>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000f67036ea>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000f67036ea>] slab_alloc mm/slab.c:3320 [inline] [<00000000f67036ea>] __do_kmalloc mm/slab.c:3654 [inline] [<00000000f67036ea>] __kmalloc_track_caller+0x165/0x300 mm/slab.c:3671 [<00000000fab0cc8e>] kmemdup+0x27/0x60 mm/util.c:127 [<00000000d9992e0a>] kmemdup include/linux/string.h:453 [inline] [<00000000d9992e0a>] em_nbyte_change+0x5b/0x90 net/sched/em_nbyte.c:32 [<000000007e04f711>] tcf_em_validate net/sched/ematch.c:241 [inline] [<000000007e04f711>] tcf_em_tree_validate net/sched/ematch.c:359 [inline] [<000000007e04f711>] tcf_em_tree_validate+0x332/0x46f net/sched/ematch.c:300 [<000000007a769204>] basic_set_parms net/sched/cls_basic.c:157 [inline] [<000000007a769204>] basic_change+0x1d7/0x5f0 net/sched/cls_basic.c:219 [<00000000e57a5997>] tc_new_tfilter+0x566/0xf70 net/sched/cls_api.c:2104 [<0000000074b68559>] rtnetlink_rcv_msg+0x3b2/0x4b0 net/core/rtnetlink.c:5415 [<00000000b7fe53fb>] netlink_rcv_skb+0x61/0x170 net/netlink/af_netlink.c:2477 [<00000000e83a40d0>] rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 [<00000000d62ba933>] netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] [<00000000d62ba933>] netlink_unicast+0x223/0x310 net/netlink/af_netlink.c:1328 [<0000000088070f72>] netlink_sendmsg+0x2c0/0x570 net/netlink/af_netlink.c:1917 [<00000000f70b15ea>] sock_sendmsg_nosec net/socket.c:639 [inline] [<00000000f70b15ea>] sock_sendmsg+0x54/0x70 net/socket.c:659 [<00000000ef95a9be>] ____sys_sendmsg+0x2d0/0x300 net/socket.c:2330 [<00000000b650f1ab>] ___sys_sendmsg+0x8a/0xd0 net/socket.c:2384 [<0000000055bfa74a>] __sys_sendmsg+0x80/0xf0 net/socket.c:2417 [<000000002abac183>] __do_sys_sendmsg net/socket.c:2426 [inline] [<000000002abac183>] __se_sys_sendmsg net/socket.c:2424 [inline] [<000000002abac183>] __x64_sys_sendmsg+0x23/0x30 net/socket.c:2424 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+03c4738ed29d5d366ddf@syzkaller.appspotmail.com Cc: Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Laura Abbott authored
[ Upstream commit bc3bdb12 ] Steve Ellis reported incorrect block sizes and alignement offsets with a SATA enclosure. Adding a quirk to disable UAS fixes the problems. Reported-by:
Steven Ellis <sellis@redhat.com> Cc: Pacho Ramos <pachoramos@gmail.com> Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 30780d08 ] With -O3, gcc has found an actual unintialized variable stored into an mmio register in two instances: drivers/atm/eni.c: In function 'discard': drivers/atm/eni.c:465:13: error: 'dma[1]' is used uninitialized in this function [-Werror=uninitialized] writel(dma[i*2+1],eni_dev->rx_dma+dma_wr*8+4); ^ drivers/atm/eni.c:465:13: error: 'dma[3]' is used uninitialized in this function [-Werror=uninitialized] Change the code to always write zeroes instead. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit c5706c7d ] Driver fails to compile in a minimized kernel's configuration because of the missing dependency on GPIOLIB_IRQCHIP. error: ‘struct gpio_chip’ has no member named ‘irq’ 44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset); Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.comSigned-off-by:
-
Krzysztof Kozlowski authored
[ Upstream commit 00c0688c ] Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Fenghua Yu authored
[ Upstream commit f11421ba ] Atomic operations that span cache lines are super-expensive on x86 (not just to the current processor, but also to other processes as all memory operations are blocked until the operation completes). Upcoming x86 processors have a switch to cause such operations to generate a #AC trap. It is expected that some real time systems will enable this mode in BIOS. In preparation for this, it is necessary to fix code that may execute atomic instructions with operands that cross cachelines because the #AC trap will crash the kernel. Since "pwol_mask" is local and never exposed to concurrency, there is no need to set bits in pwol_mask using atomic operations. Directly operate on the byte which contains the bit instead of using __set_bit() to avoid any big endian concern due to type cast to unsigned long in __set_bit(). Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
Andreas Kemnade authored
[ Upstream commit a76dfb85 ] Platform device aliases were missing so module autoloading did not work. Signed-off-by:
Andreas Kemnade <andreas@kemnade.info> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.infoSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Randy Dunlap authored
[ Upstream commit 1928b36c ] Fix kconfig warning for arch/arc/plat-eznps/Kconfig allmodconfig: WARNING: unmet direct dependencies detected for CLKSRC_NPS Depends on [n]: GENERIC_CLOCKEVENTS [=y] && !PHYS_ADDR_T_64BIT [=y] Selected by [y]: - ARC_PLAT_EZNPS [=y] Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ofer Levi <oferle@mellanox.com> Cc: linux-snps-arc@lists.infradead.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Johan Hovold authored
commit 2d68bb26 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: a1030e92 ("[PATCH] zd1211rw: Convert installer CDROM device into WLAN device") Cc: stable <stable@vger.kernel.org> # 2.6.19 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johan Hovold authored
commit 39a4281c upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26f1fad2 ("New driver: rtl8xxxu (mac80211)") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Johan Hovold authored
commit 3428fbcd upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 71bb244b ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets") Cc: stable <stable@vger.kernel.org> # 3.4 Cc: Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Johan Hovold authored
commit 0ef33295 upstream. Make sure to use the current alternate setting when verifying the storage interface descriptors to avoid submitting an URB to an invalid endpoint. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 36bcce43 ("ath9k_htc: Handle storage devices") Cc: stable <stable@vger.kernel.org> # 2.6.39 Signed-off-by:
-
Lukas Wunner authored
commit dc76697d upstream. Unbinding the bcm2835aux UART driver raises the following error if the maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS): (NULL device *): Removing wrong port: a6f80333 != fa20408b That's because bcm2835aux_serial_probe() retrieves UART line number 1 from the devicetree and stores it in data->uart.port.line, while serial8250_register_8250_port() instead uses UART line number 0, which is stored in data->line. On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line, which contains the wrong number. Fix it. The issue does not occur if the maximum number of 8250 UARTs is >= 2. Fixes: bdc5f300 ("serial: bcm2835: add driver for bcm2835-aux-uart") Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.6+ Cc: Martin Sperl <kernel@martin.sperl.org> Reviewed-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Tested-by:
-
Malcolm Priestley authored
commit 9dd631fa upstream. The driver reporting IEEE80211_TX_STAT_ACK is not being handled correctly. The driver should only report on TSR_TMO flag is not set indicating no transmission errors and when not IEEE80211_TX_CTL_NO_ACK is being requested. Cc: stable <stable@vger.kernel.org> Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/340f1f7f-c310-dca5-476f-abc059b9cd97@gmail.comSigned-off-by:
-
Malcolm Priestley authored
commit d579c43c upstream. It appears that the drivers does not go into power save correctly the NULL data packets are not being transmitted because it not enabled in mac80211. The driver needs to capture ieee80211_is_nullfunc headers and copy the duration_id to it's own duration data header. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Malcolm Priestley authored
commit d971fdd3 upstream. It appears that the driver still transmits in CTS protect mode even though it is not enabled in mac80211. That is both packet types PK_TYPE_11GA and PK_TYPE_11GB both use CTS protect. The only difference between them GA does not use B rates. Find if only B rate in GB or GA in protect mode otherwise transmit packets as PK_TYPE_11A. Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Colin Ian King authored
commit 4cc41cbc upstream. Currently when the call to prism2sta_ifst fails a netdev_err error is reported, error return variable result is set to -1 but the function always returns 0 for success. Fix this by returning the error value in variable result rather than 0. Addresses-Coverity: ("Unused value") Fixes: 00b3ed16 ("Staging: add wlan-ng prism2 usb driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200114181604.390235-1-colin.king@canonical.comSigned-off-by:
-
