copy_xstate_to_user() is a weird API - in part due to a bad API inherited
from the regset APIs.

But don't propagate that bad API choice into the FPU code - so as a first
step split the API into kernel and user buffer handling routines.

(Also split the xstate_copyout() internal helper.)

The split API is a dumb duplication that should be obviously correct, the
real splitting will be done in the next patch.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-3-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

x86/fpu: Rename copyin_to_xsaves()/copyout_from_xsaves() to copy_user_to_xstate()/copy_xstate_to_user()

The 'copyin/copyout' nomenclature needlessly departs from what the modern FPU code
uses, which is:

 copy_fpregs_to_fpstate()
 copy_fpstate_to_sigframe()
 copy_fregs_to_user()
 copy_fxregs_to_kernel()
 copy_fxregs_to_user()
 copy_kernel_to_fpregs()
 copy_kernel_to_fregs()
 copy_kernel_to_fxregs()
 copy_kernel_to_xregs()
 copy_user_to_fregs()
 copy_user_to_fxregs()
 copy_user_to_xregs()
 copy_xregs_to_kernel()
 copy_xregs_to_user()

I.e. according to this pattern, the following rename should be done:

  copyin_to_xsaves()    -> copy_user_to_xstate()
  copyout_from_xsaves() -> copy_xstate_to_user()

or, if we want to be pedantic, denote that that the user-space format is ptrace:

  copyin_to_xsaves()    -> copy_user_ptrace_to_xstate()
  copyout_from_xsaves() -> copy_xstate_to_user_ptrace()

But I'd suggest the shorter, non-pedantic name.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20170923130016.21448-2-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull ACPI fixes from Rafael Wysocki:
 "These fix the initialization of resources in the ACPI WDAT watchdog
  driver, a recent regression in the ACPI device properties handling, a
  recent change in behavior causing the ACPI_HANDLE() macro to only work
  for GPL code and create a MAINTAINERS entry for ACPI PMIC drivers in
  order to specify the official reviewers for that code.

  Specifics:

   - Fix the initialization of resources in the ACPI WDAT watchdog
     driver that uses unititialized memory which causes compiler
     warnings to be triggered (Arnd Bergmann).

   - Fix a recent regression in the ACPI device properties handling that
     causes some device properties data to be skipped during enumeration
     (Sakari Ailus).

   - Fix a recent change in behavior that caused the ACPI_HANDLE() macro
     to stop working for non-GPL code which is a problem for the NVidia
     binary graphics driver, for example (John Hubbard).

   - Add a MAINTAINERS entry for the ACPI PMIC drivers to specify the
     official reviewers for that code (Rafael Wysocki)"

* tag 'acpi-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again
  ACPI / watchdog: properly initialize resources
  ACPI / PMIC: Add code reviewers to MAINTAINERS

Pull power management fixes from Rafael Wysocki:
 "These fix a cpufreq regression introduced by recent changes related to
  the generic DT driver, an initialization time memory leak in cpuidle
  on ARM, a PM core bug that may cause system suspend/resume to fail on
  some systems, a request type validation issue in the PM QoS framework
  and two documentation-related issues.

  Specifics:

   - Fix a regression in cpufreq on systems using DT as the source of
     CPU configuration information where two different code paths
     attempt to create the cpufreq-dt device object (there can be only
     one) and fix up the "compatible" matching for some TI platforms on
     top of that (Viresh Kumar, Dave Gerlach).

   - Fix an initialization time memory leak in cpuidle on ARM which
     occurs if the cpuidle driver initialization fails (Stefan Wahren).

   - Fix a PM core function that checks whether or not there are any
     system suspend/resume callbacks for a device, but forgets to check
     legacy callbacks which then may be skipped incorrectly and the
     system may crash and/or the device may become unusable after a
     suspend-resume cycle (Rafael Wysocki).

   - Fix request type validation for latency tolerance PM QoS requests
     which may lead to unexpected behavior (Jan Schönherr).

   - Fix a broken link to PM documentation from a header file and a typo
     in a PM document (Geert Uytterhoeven, Rafael Wysocki)"

* tag 'pm-4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  ARM: cpuidle: Avoid memleak if init fail
  cpufreq: dt-platdev: Add some missing platforms to the blacklist
  PM: core: Fix device_pm_check_callbacks()
  PM: docs: Drop an excess character from devices.rst
  PM / QoS: Use the correct variable to check the QoS request type
  driver core: Fix link to device power management documentation

Pull input fixes from Dmitry Torokhov:

 - fixes for two long standing issues (lock up and a crash) in force
   feedback handling in uinput driver

 - tweak to firmware update timing in Elan I2C touchpad driver.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - extend Flash-Write delay
  Input: uinput - avoid crash when sending FF request to device going away
  Input: uinput - avoid FF flush when destroying device

Pull seccomp updates from Kees Cook:
 "Major additions:

   - sysctl and seccomp operation to discover available actions
     (tyhicks)

   - new per-filter configurable logging infrastructure and sysctl
     (tyhicks)

   - SECCOMP_RET_LOG to log allowed syscalls (tyhicks)

   - SECCOMP_RET_KILL_PROCESS as the new strictest possible action

   - self-tests for new behaviors"

[ This is the seccomp part of the security pull request during the merge
  window that was nixed due to unrelated problems   - Linus ]

* tag 'seccomp-v4.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  samples: Unrename SECCOMP_RET_KILL
  selftests/seccomp: Test thread vs process killing
  seccomp: Implement SECCOMP_RET_KILL_PROCESS action
  seccomp: Introduce SECCOMP_RET_KILL_PROCESS
  seccomp: Rename SECCOMP_RET_KILL to SECCOMP_RET_KILL_THREAD
  seccomp: Action to log before allowing
  seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
  seccomp: Selftest for detection of filter flag support
  seccomp: Sysctl to configure actions that are allowed to be logged
  seccomp: Operation for checking if an action is available
  seccomp: Sysctl to display available actions
  seccomp: Provide matching filter for introspection
  selftests/seccomp: Refactor RET_ERRNO tests
  selftests/seccomp: Add simple seccomp overhead benchmark
  selftests/seccomp: Add tests for basic ptrace actions

Merge tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "Various SMB3 fixes for stable and security improvements from the
  recently completed SMB3/Samba test events

* tag '4.14-smb3-fixes-from-recent-test-events-for-stable' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags
  SMB3: handle new statx fields
  SMB: Validate negotiate (to protect against downgrade) even if signing off
  cifs: release auth_key.response for reconnect.
  cifs: release cifs root_cred after exit_cifs
  CIFS: make arrays static const, reduces object code size
  [SMB3] Update session and share information displayed for debugging SMB2/SMB3
  cifs: show 'soft' in the mount options for hard mounts
  SMB3: Warn user if trying to sign connection that authenticated as guest
  SMB3: Fix endian warning
  Fix SMB3.1.1 guest authentication to Samba

Pull ceph fixes from Ilya Dryomov:
 "Two small but important fixes: RADOS semantic change in upcoming v12.2.1
  release and a rare NULL dereference in create_session_open_msg()"

* tag 'ceph-for-4.14-rc2' of git://github.com/ceph/ceph-client:
  ceph: avoid panic in create_session_open_msg() if utsname() returns NULL
  libceph: don't allow bidirectional swap of pg-upmap-items

Signed-off-by: Steve French <smfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Pull PCI fixes from Bjorn Helgaas:

 - fix endpoint "end of test" interrupt issue (introduced in v4.14-rc1)
   (John Keeping)

 - fix MIPS use-after-free map_irq() issue (introduced in v4.14-rc1)
   (Lorenzo Pieralisi)

* tag 'pci-v4.14-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: endpoint: Use correct "end of test" interrupt
  MIPS: PCI: Move map_irq() hooks out of initdata

Pull IOMMU fixes from Joerg Roedel:

 - two Kconfig fixes to fix dependencies that cause compile failures
   when they are not fulfilled.

 - a section mismatch fix for Intel VT-d

 - a fix for PCI topology detection in ARM device-tree code

* tag 'iommu-fixes-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/of: Remove PCI host bridge node check
  iommu/qcom: Depend on HAS_DMA to fix compile error
  iommu/vt-d: Fix harmless section mismatch warning
  iommu: Add missing dependencies

Pull arch/tile fixes from Chris Metcalf:
 "These are a code cleanup and config cleanup, respectively"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: array underflow in setup_maxnodemem()
  tile: defconfig: Cleanup from old Kconfig options

Pull arm64 fixes from Catalin Marinas:

 - #ifdef CONFIG_EFI around __efi_fpsimd_begin/end

 - Assembly code alignment reduced to 4 bytes from 16

 - Ensure the kernel is compiled for LP64 (there are some arm64
   compilers around defaulting to ILP32)

 - Fix arm_pmu_acpi memory leak on the error path

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  drivers/perf: arm_pmu_acpi: Release memory obtained by kasprintf
  arm64: ensure the kernel is compiled for LP64
  arm64: relax assembly code alignment from 16 byte to 4 byte
  arm64: efi: Don't include EFI fpsimd save/restore code in non-EFI kernels

We weren't returning the creation time or the two easily supported
attributes (ENCRYPTED or COMPRESSED) for the getattr call to
allow statx to return these fields.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>\
Acked-by: Jeff Layton <jlayton@poochiereds.net>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Some architectures define the no-op macros/functions copy_segments,
release_segments and forget_segments. These are used nowhere in the
tree, so removed them.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Vineet Gupta <vgupta@synopsys.com>   [for arch/arc]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-pmic:
  ACPI / PMIC: Add code reviewers to MAINTAINERS

* acpi-bus:
  ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again

* acpi-wdat:
  ACPI / watchdog: properly initialize resources

* acpi-properties:
  ACPI: properties: Return _DSD hierarchical extension (data) sub-nodes correctly

* pm-cpufreq:
  cpufreq: ti-cpufreq: Support additional am43xx platforms
  cpufreq: dt-platdev: Add some missing platforms to the blacklist

* pm-cpuidle:
  ARM: cpuidle: Avoid memleak if init fail

* pm-core:
  PM: core: Fix device_pm_check_callbacks()

* pm-qos:
  PM / QoS: Use the correct variable to check the QoS request type

* pm-docs:
  PM: docs: Drop an excess character from devices.rst
  driver core: Fix link to device power management documentation

The original 20ms delay is only marginally enough delay after a block write
operation during firmware update. Let's increase the delay to ensure that
the controller finishes up storing the page to avoid failures in the
firmware updates.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Pull xen fixes from Juergen Gross:
 "A fix for a missing __init annotation and two cleanup patches"

* tag 'for-linus-4.14b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen, arm64: drop dummy lookup_address()
  xen: don't compile pv-specific parts if XEN_PV isn't configured
  xen: x86: mark xen_find_pt_base as __init

Pull powerpc fixes from Michael Ellerman:
 "It turns out our single-fix pull from last week was too good to be
  true. I missed a few fixes in that pull that had already come in
  because I was on leave, but also we hadn't found the bugs yet. So this
  week it's a bit bigger, though not ridiculous. Hopefully things will
  settle down from here on.

  Four fixes for the new instruction emulation code. A fix for CPU
  offline on bare metal machines when certain idle states are not
  supported, and a fix for a device_node refcounting oops during CPU
  hotplug, caused by recent changes.

  Going to stable are a fix for an oops during core dump on machines
  that have TM (Transactional Memory) disabled. Reordering some EEH
  initialisation to avoid trashing memory, and another device_node
  refcounting fix.

  And a few other minor things.

 Thanks to: Anton Blanchard, Benjamin Herrenschmidt, Cyril Bur, Gautham
 R. Shenoy, Gustavo Romero, Kamalesh Babulal, Matthew Weber, Matt Weber,
 Naveen N. Rao, Nicholas Piggin, Pavithra Prakash, Ravi Bangoria, Ronak
 Desai, Scott Wood, Tyrel Datwyler"

* tag 'powerpc-4.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Fix parent_dn reference leak in add_dt_node()
  powerpc/pseries: Fix "OF: ERROR: Bad of_node_put() on /cpus" during DLPAR
  powerpc/eeh: Create PHB PEs after EEH is initialized
  powerpc/kprobes: Update optprobes to use emulate_update_regs()
  powerpc/powernv: Clear LPCR[PECE1] via stop-api only for deep state offline
  powerpc/sstep: mullw should calculate a 64 bit signed result
  powerpc/sstep: Fix issues with mcrf
  powerpc/sstep: Fix issues with set_cr0()
  powerpc/tm: Flush TM only if CPU has TM feature
  powerpc/sysrq: Fix oops whem ppmu is not registered
  powerpc/configs: Update for CONFIG_SND changes
  powerpc/e6500: Update machine check for L1D cache err

Pull MIPS fixes from Ralf Baechle:

 - Fix a build error on MSP71xx which used to rely on somehow magically
   <asm/setup.h> being pulled in which no longer happens.

 - Fix the __write_64bit_c0_split inline assembler where there was the
   theoretical possibility of GCC interpret the constraints such that
   bad code could result.

 - A __init was causing section mismatch errors on Alchemy. Just to be
   on the safe side, Manuel's patch does away with all of them.

 - Fix perf event init.

* '4.14-fixes' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: PCI: fix pcibios_map_irq section mismatch
  MIPS: Fix input modify in __write_64bit_c0_split()
  MIPS: MSP71xx: Include asm/setup.h
  MIPS: Fix perf event init

Pull s390 fixes from Martin Schwidefsky:

 - A couple of bug fixes: memory management, perf, cio, dasd and
   scm_blk.

 - A larger change in regard to the CPU topology to improve performance
   for systems running under z/VM or KVM.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/topology: enable / disable topology dynamically
  s390/topology: alternative topology for topology-less machines
  s390/mm: fix write access check in gup_huge_pmd()
  s390/mm: make pmdp_invalidate() do invalidation only
  s390/cio: recover from bad paths
  s390/scm_blk: consistently use blk_status_t as error type
  s390/dasd: fix race during dasd initialization
  s390/perf: fix bug when creating per-thread event

Pull crypto fixes from Herbert Xu:
 - Fix compiler warnings in inside-secure
 - Fix LS1021A support in caam
 - Avoid using RBP in x86 crypto code
 - Fix bug in talitos that prevents hashing with algif
 - Fix bugs talitos hashing code that cause incorrect hash result
 - Fix memory freeing path bug in drbg
 - Fix af_alg crash when two SG lists are chained

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: af_alg - update correct dst SGL entry
  crypto: caam - fix LS1021A support on ARMv7 multiplatform kernel
  crypto: inside-secure - fix gcc-4.9 warnings
  crypto: talitos - Don't provide setkey for non hmac hashing algs
  crypto: talitos - fix hashing
  crypto: talitos - fix sha224
  crypto: x86/twofish - Fix RBP usage
  crypto: sha512-avx2 - Fix RBP usage
  crypto: x86/sha256-ssse3 - Fix RBP usage
  crypto: x86/sha256-avx2 - Fix RBP usage
  crypto: x86/sha256-avx - Fix RBP usage
  crypto: x86/sha1-ssse3 - Fix RBP usage
  crypto: x86/sha1-avx2 - Fix RBP usage
  crypto: x86/des3_ede - Fix RBP usage
  crypto: x86/cast6 - Fix RBP usage
  crypto: x86/cast5 - Fix RBP usage
  crypto: x86/camellia - Fix RBP usage
  crypto: x86/blowfish - Fix RBP usage
  crypto: drbg - fix freeing of resources

Free memory region, if arm_pmu_acpi_probe is not successful.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

of_pci_iommu_init() tries to be clever and stop its alias walk at the
device represented by master_np, in case of weird PCI topologies where
the bridge to the IOMMU and the rest of the system is not at the root.
It turns out this is a bit short-sighted, since there are plenty of
other callers of pci_for_each_dma_alias() which would also need the same
behaviour in that situation, and the only platform so far with such a
topology (Cavium ThunderX2) already solves it more generally via a PCI
quirk. As this check is effectively redundant, and returning a boolean
value as an int is a bit broken anyway, let's just get rid of it.
Reported-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Fixes: d87beb74 ("iommu/of: Handle PCI aliases properly")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull libnvdimm fixes from Dan Williams:
 "A crash fix and corresponding regression test enabling for the crash
  scenario. The unit test for this crash is available in ndctl-v58.2.

  This branch has received a build success notification from the
  0day-kbuild robot over 148 configs. The fix is tagged for -stable /
  backport to 4.13"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, namespace: fix btt claim class crash
  tools/testing/nvdimm: disable labels for nfit_test.1

If FF request comes in while uinput device is going away,
uinput_request_send() will fail with -ENODEV, and uinput_request_submit()
will attempt to mark the slot as unused by calling uinput_request_done().
Unfortunately in this case we haven't initialized request->done completion
yet, and we get a crash:

[   39.402036] BUG: spinlock bad magic on CPU#1, fftest/3108
[   39.402046]  lock: 0xffff88006a93bb00, .magic: 00000000, .owner: /39, .owner_cpu: 1217155072
[   39.402055] CPU: 1 PID: 3108 Comm: fftest Tainted: G        W 4.13.0+ #15
[   39.402059] Hardware name: LENOVO 20HQS0EG02/20HQS0EG02, BIOS N1MET37W (1.22 ) 07/04/2017
[   39.402064]  0000000000000086 f0fad82f3ceaa120 ffff88006a93b9a0 ffffffff9de941bb
[   39.402077]  ffff88026df8ae00 ffff88006a93bb00 ffff88006a93b9c0 ffffffff9dca62b7
[   39.402088]  ffff88006a93bb00 ffff88006a93baf8 ffff88006a93b9e0 ffffffff9dca62e7
[   39.402099] Call Trace:
[   39.402112]  [<ffffffff9de941bb>] dump_stack+0x4d/0x63
[   39.402123]  [<ffffffff9dca62b7>] spin_dump+0x97/0x9c
[   39.402130]  [<ffffffff9dca62e7>] spin_bug+0x2b/0x2d
[   39.402138]  [<ffffffff9dca6373>] do_raw_spin_lock+0x28/0xfd
[   39.402147]  [<ffffffff9e3055cd>] _raw_spin_lock_irqsave+0x19/0x1f
[   39.402154]  [<ffffffff9dca05b7>] complete+0x1d/0x48
[   39.402162]  [<ffffffffc04f30af>] 0xffffffffc04f30af
[   39.402167]  [<ffffffffc04f468c>] 0xffffffffc04f468c
[   39.402177]  [<ffffffff9dd59c16>] ? __slab_free+0x22f/0x359
[   39.402184]  [<ffffffff9dcc13e9>] ? tk_clock_read+0xc/0xe
[   39.402189]  [<ffffffffc04f471f>] 0xffffffffc04f471f
[   39.402195]  [<ffffffff9dc9ffe5>] ? __wake_up+0x44/0x4b
[   39.402200]  [<ffffffffc04f3240>] ? 0xffffffffc04f3240
[   39.402207]  [<ffffffff9e0f57f3>] erase_effect+0xa1/0xd2
[   39.402214]  [<ffffffff9e0f58c6>] input_ff_flush+0x43/0x5c
[   39.402219]  [<ffffffffc04f32ad>] 0xffffffffc04f32ad
[   39.402227]  [<ffffffff9e0f174f>] input_flush_device+0x3d/0x51
[   39.402234]  [<ffffffff9e0f69ae>] evdev_flush+0x49/0x5c
[   39.402243]  [<ffffffff9dd62d6e>] filp_close+0x3f/0x65
[   39.402253]  [<ffffffff9dd7dcf7>] put_files_struct+0x66/0xc1
[   39.402261]  [<ffffffff9dd7ddeb>] exit_files+0x47/0x4e
[   39.402270]  [<ffffffff9dc6b329>] do_exit+0x483/0x969
[   39.402278]  [<ffffffff9dc73211>] ? recalc_sigpending_tsk+0x3d/0x44
[   39.402285]  [<ffffffff9dc6c7a2>] do_group_exit+0x42/0xb0
[   39.402293]  [<ffffffff9dc767e1>] get_signal+0x58d/0x5bf
[   39.402300]  [<ffffffff9dc03701>] do_signal+0x37/0x53e
[   39.402307]  [<ffffffff9e0f8401>] ? evdev_ioctl_handler+0xac8/0xb04
[   39.402314]  [<ffffffff9e0f8464>] ? evdev_ioctl+0x10/0x12
[   39.402321]  [<ffffffff9dd74cfa>] ? do_vfs_ioctl+0x42e/0x501
[   39.402328]  [<ffffffff9dc0170e>] prepare_exit_to_usermode+0x66/0x90
[   39.402333]  [<ffffffff9dc0181b>] syscall_return_slowpath+0xe3/0xec
[   39.402339]  [<ffffffff9e305b7b>] int_ret_from_sys_call+0x25/0x8f

While we could solve this by simply initializing the completion earlier, we
are better off rearranging the code a bit so we avoid calling complete() on
requests that we did not send out. This patch consolidates marking request
slots as free in one place (in uinput_request_submit(), the same place
where we acquire them) and having everyone else simply signal completion
of the requests.

Fixes: 00ce756c ("Input: uinput - mark failed submission requests as free")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Normally, when input device supporting force feedback effects is being
destroyed, we try to "flush" currently playing effects, so that the
physical device does not continue vibrating (or executing other effects).
Unfortunately this does not work well for uinput as flushing of the effects
deadlocks with the destroy action:

- if device is being destroyed because the file descriptor is being closed,
  then there is noone to even service FF requests;

- if device is being destroyed because userspace sent UI_DEV_DESTROY,
  while theoretically it could be possible to service FF requests,
  userspace is unlikely to do so (they'd need to make sure FF handling
  happens on a separate thread) even if kernel solves the issue with FF
  ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex.

To avoid lockups like the one below, let's install a custom input device
flush handler, and avoid trying to flush force feedback effects when we
destroying the device, and instead rely on uinput to shut off the device
properly.

NMI watchdog: Watchdog detected hard LOCKUP on cpu 3
...
 <<EOE>>  [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40
 [<ffffffff810e633d>] complete+0x1d/0x50
 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput]
 [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput]
 [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput]
 [<ffffffff815d91ad>] erase_effect+0xad/0xf0
 [<ffffffff815d929d>] flush_effects+0x4d/0x90
 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60
 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0
 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60
 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150
 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70
 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput]
 [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput]
 [<ffffffff811231ab>] ? do_futex+0x12b/0xad0
 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput]
 [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480
 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60
 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90
 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71
Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Reported-by: Clément VUCHENER <clement.vuchener@gmail.com>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Merge tag 'kbuild-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
 "Here are some early Kbuild fixes.

  The in-kernel firmware was removed during the previous merge window.
  Since then, some bug reports of broken rpm building are flying in ML.
  We need to fix it now.

  Summary:

   - remove firmware install from rpm-pkg / deb-pkg

   - fix mismatch between release number and UTS_VERSION for rpm-pkg"

* tag 'kbuild-fixes-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: rpm-pkg: fix version number handling
  kbuild: deb-pkg: remove firmware package support
  kbuild: rpm-pkg: delete firmware_install to fix build error

Pull misc fixes from Al Viro:
 "A couple of regression fixes, one for this merge window, one for the
  previous cycle"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ipc/shm: Fix order of parameters when calling copy_compat_shmid_to_user
  iov_iter: fix page_copy_sane for compound pages

Pull mtd fixes from Boris Brezillon:
 "SPI NOR:
   - Fix the SFDP parsing code (bugs reported by Geert Uytterhoeven)

  NAND:
   - Fix a resource leak in the lpc32xx_mlc driver
   - Fix a build warning in the core"

* tag 'mtd/fixes-for-4.14-rc2' of git://git.infradead.org/linux-mtd:
  mtd: nand: remove unused blockmask variable
  mtd: nand: lpc32xx_mlc: Fix an error handling path in lpc32xx_nand_probe()
  mtd: spi-nor: fix DMA unsafe buffer issue in spi_nor_read_sfdp()
  mtd: spi-nor: Check consistency of the memory size extracted from the SFDP

Pull drm fixes from Dave Airlie:
 "amdkfd, i915 and exynos fixes.

  I've ended up on unplanned + planned leave this week, but there were
  some fixes I decided to dequeue, some amdkfd bits missed the next pull
  but they are pretty trivial, so I included them.

  I'm not sure I'll see much else for rc2, lots of people are at XDC"

* tag 'drm-fixes-for-v4.14-rc2' of git://people.freedesktop.org/~airlied/linux:
  drm/exynos/hdmi: Fix unsafe list iteration
  drm: exynos: include linux/irq.h
  drm/exynos: Fix suspend/resume support
  drm/exynos: Fix locking in the suspend/resume paths
  drm/i915: Remove unused 'in_vbl' from i915_get_crtc_scanoutpos()
  drm/i915/cnp: set min brightness from VBT
  Revert "drm/i915/bxt: Disable device ready before shutdown command"
  drm/i915/bxt: set min brightness from VBT
  drm/i915: Fix an error handling in 'intel_framebuffer_init()'
  drm/i915/gvt: Fix incorrect PCI BARs reporting
  drm/amdkfd: pass queue's mqd when destroying mqd
  drm/amdkfd: remove memset before memcpy
  uapi linux/kfd_ioctl.h: only use __u32 and __u64

Pull dma mapping fix from Christoph Hellwig:
 "A fix for a fix that went in this merge window from Arnd"

* tag 'dma-mapping-4.14-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-coherent: fix rmem_dma_device_init regression

Drop  the __init from pcibios_map_irq() to make this section mis-
match go away:

WARNING: vmlinux.o(.text+0x56acd4): Section mismatch in reference from the function pcibios_scanbus() to the function .init.text:pcibios_map_irq()
The function pcibios_scanbus() references
the function __init pcibios_map_irq().
This is often because pcibios_scanbus lacks a __init
annotation or the annotation of pcibios_map_irq is wrong.

Run-Tested only on Alchemy.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17267/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The inline asm in __write_64bit_c0_split() modifies the 64-bit input
operand by shifting the high register left by 32, and constructing the
full 64-bit value in the low register (even on a 32-bit kernel), so if
that value is used again it could cause breakage as GCC would assume the
registers haven't changed when they have.

To quote the GCC extended asm documentation:
> Warning: Do not modify the contents of input-only operands (except for
> inputs tied to outputs). The compiler assumes that on exit from the
> asm statement these operands contain the same values as they had
> before executing the statement.

Avoid modifying the input by using a temporary variable as an output
which is modified instead of the input and not otherwise used. The asm
is always __volatile__ so GCC shouldn't optimise it out. The low
register of the temporary output is written before the high register of
the input is read, so we have two constraint alternatives, one where
both use the same registers (for when the input value isn't subsequently
used), and one with an early clobber on the output in case the low
output uses the same register as the high input. This allows the
resulting assembly to remain mostly unchanged.

A diff of a MIPS32r6 kernel reveals only three differences, two in
relation to write_c0_r10k_diag() in cpu_probe() (register allocation
rearranged slightly but otherwise identical), and one in relation to
write_c0_cvmmemctl2() in kvm_vz_local_flush_guesttlb_all(), but the
octeon CPU is only supported on 64-bit kernels where
__write_64bit_c0_split() isn't used so that shouldn't matter in
practice. So there currently doesn't appear to be anything broken by
this bug.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/17315/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

msp71xx_defconfig can not be built at the in v4.14-rc1

arch/mips/pmcs-msp71xx/msp_smp.c:72:2: error: implicit declaration of function 'set_vi_handler' [-Werror=implicit-function-declaration]

I don't know what caused the regression, but including the right
header is the obvious fix.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/17309/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

A reference to the parent device node is held by add_dt_node() for the
node to be added. If the call to dlpar_configure_connector() fails
add_dt_node() returns ENOENT and that reference is not freed.

Add a call to of_node_put(parent_dn) prior to bailing out after a
failed dlpar_configure_connector() call.

Fixes: 8d5ff320 ("powerpc/pseries: Make dlpar_configure_connector parent node aware")
Cc: stable@vger.kernel.org # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 215ee763 ("powerpc: pseries: remove dlpar_attach_node
dependency on full path") reworked dlpar_attach_node() to no longer
look up the parent node "/cpus", but instead to have the parent node
passed by the caller in the function parameter list.

As a result dlpar_attach_node() is no longer responsible for freeing
the reference to the parent node. However, commit 215ee763 failed
to remove the of_node_put(parent) call in dlpar_attach_node(), or to
take into account that the reference to the parent in the caller
dlpar_cpu_add() needs to be held until after dlpar_attach_node()
returns.

As a result doing repeated cpu add/remove dlpar operations will
eventually result in the following error:

  OF: ERROR: Bad of_node_put() on /cpus
  CPU: 0 PID: 10896 Comm: drmgr Not tainted 4.13.0-autotest #1
  Call Trace:
   dump_stack+0x15c/0x1f8 (unreliable)
   of_node_release+0x1a4/0x1c0
   kobject_put+0x1a8/0x310
   kobject_del+0xbc/0xf0
   __of_detach_node_sysfs+0x144/0x210
   of_detach_node+0xf0/0x180
   dlpar_detach_node+0xc4/0x120
   dlpar_cpu_remove+0x280/0x560
   dlpar_cpu_release+0xbc/0x1b0
   arch_cpu_release+0x6c/0xb0
   cpu_release_store+0xa0/0x100
   dev_attr_store+0x68/0xa0
   sysfs_kf_write+0xa8/0xf0
   kernfs_fop_write+0x2cc/0x400
   __vfs_write+0x5c/0x340
   vfs_write+0x1a8/0x3d0
   SyS_write+0xa8/0x1a0
   system_call+0x58/0x6c

Fix the issue by removing the of_node_put(parent) call from
dlpar_attach_node(), and ensuring that the reference to the parent
node is properly held and released by the caller dlpar_cpu_add().

Fixes: 215ee763 ("powerpc: pseries: remove dlpar_attach_node dependency on full path")
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
[mpe: Add a comment in the code and frob the change log slightly]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Otherwise we end up not yet having computed the right diag data size
on powernv where EEH initialization is delayed, thus causing memory
corruption later on when calling OPAL.

Fixes: 5cb1f8fd ("powerpc/powernv/pci: Dynamically allocate PHB diag data")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>