- 08 Dec, 2016 31 commits
-
-
Stéphan Rafin authored
commit ac95330b upstream. commit cfa63688 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") introduced a regression for m factor computation in sun4i_get_apb1_factors function. The old code reassigned the "parent_rate" parameter to the targeted divisor value and was buggy for the returned frequency but not for the computed factors. Now, returned frequency is good but m factor is incorrectly computed (its max value 31 is always set resulting in a significantly slower frequency than the requested one...) This patch simply restores the original proper computation for m while keeping the good changes for returned rate. Fixes: cfa63688 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") Signed-off-by:
Stéphan Rafin <stephan@soliotek.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Weiner authored
commit ae31fe51 upstream. The following commit: 75925e1a ("perf/x86: Optimize stack walk user accesses") ... switched from copy_from_user_nmi() to __copy_from_user_nmi() with a manual access_ok() check. Unfortunately, copy_from_user_nmi() does an explicit check against TASK_SIZE, whereas the access_ok() uses whatever the current address limit of the task is. We are getting NMIs when __probe_kernel_read() has switched to KERNEL_DS, and then see vmalloc faults when we access what looks like pointers into vmalloc space: [] WARNING: CPU: 3 PID: 3685731 at arch/x86/mm/fault.c:435 vmalloc_fault+0x289/0x290 [] CPU: 3 PID: 3685731 Comm: sh Tainted: G W 4.6.0-5_fbk1_223_gdbf0f40 #1 [] Call Trace: [] <NMI> [<ffffffff814717d1>] dump_stack+0x4d/0x6c [] [<ffffffff81076e43>] __warn+0xd3/0xf0 [] [<ffffffff81076f2d>] warn_slowpath_null+0x1d/0x20 [] [<ffffffff8104a899>] vmalloc_fault+0x289/0x290 [] [<ffffffff8104b5a0>] __do_page_fault+0x330/0x490 [] [<ffffffff8104b70c>] do_page_fault+0xc/0x10 [] [<ffffffff81794e82>] page_fault+0x22/0x30 [] [<ffffffff81006280>] ? perf_callchain_user+0x100/0x2a0 [] [<ffffffff8115124f>] get_perf_callchain+0x17f/0x190 [] [<ffffffff811512c7>] perf_callchain+0x67/0x80 [] [<ffffffff8114e750>] perf_prepare_sample+0x2a0/0x370 [] [<ffffffff8114e840>] perf_event_output+0x20/0x60 [] [<ffffffff8114aee7>] ? perf_event_update_userpage+0xc7/0x130 [] [<ffffffff8114ea01>] __perf_event_overflow+0x181/0x1d0 [] [<ffffffff8114f484>] perf_event_overflow+0x14/0x20 [] [<ffffffff8100a6e3>] intel_pmu_handle_irq+0x1d3/0x490 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff81197191>] ? vunmap_page_range+0x1a1/0x2f0 [] [<ffffffff811972f1>] ? unmap_kernel_range_noflush+0x11/0x20 [] [<ffffffff814f2056>] ? ghes_copy_tofrom_phys+0x116/0x1f0 [] [<ffffffff81040d1d>] ? x2apic_send_IPI_self+0x1d/0x20 [] [<ffffffff8100411d>] perf_event_nmi_handler+0x2d/0x50 [] [<ffffffff8101ea31>] nmi_handle+0x61/0x110 [] [<ffffffff8101ef94>] default_do_nmi+0x44/0x110 [] [<ffffffff8101f13b>] do_nmi+0xdb/0x150 [] [<ffffffff81795187>] end_repeat_nmi+0x1a/0x1e [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] [<ffffffff8147daf7>] ? copy_user_enhanced_fast_string+0x7/0x10 [] <<EOE>> <IRQ> [<ffffffff8115d05e>] ? __probe_kernel_read+0x3e/0xa0 Fix this by moving the valid_user_frame() check to before the uaccess that loads the return address and the pointer to the next frame. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: linux-kernel@vger.kernel.org Fixes: 75925e1a ("perf/x86: Optimize stack walk user accesses") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matthias Brugger authored
commit 5ad45307 upstream. The probe function requests the interrupt before initializing the ddp component. Which leads to a null pointer dereference at boot. Fix this by requesting the interrput after all components got initialized properly. Fixes: 119f5173 ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit 0e1614ac upstream. Make sure to drop the reference to the parent device taken by class_find_device() after "unexporting" any children when deregistering a PWM chip. Fixes: 0733424c ("pwm: Unexport children before chip removal") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Thierry Reding <thierry.reding@gmail.com> Signed-off-by:
-
Dan Carpenter authored
commit a0f1d21c upstream. We should move the ops->destroy(dev) after the list_del(&dev->vm_node) so that we don't use "dev" after freeing it. Fixes: a28ebea2 ("KVM: Protect device ops->create and list_add with kvm->lock") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Sudeep Holla authored
commit 909e481e upstream. The core and the cluster sleep state entry latencies can't be same as cluster sleep involves more work compared to core level e.g. shared cache maintenance. Experiments have shown on an average about 100us more latency for the cluster sleep state compared to the core level sleep. This patch fixes the entry latency for the cluster sleep state. Fixes: 28e10a8f ("arm64: dts: juno: Add idle-states to device tree") Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: "Jon Medhurst (Tixy)" <tixy@linaro.org> Reviewed-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Alex Deucher authored
commit bcfdd5d5 upstream. The ATPX method does not always exist on the dGPU, it may be located at the iGPU. The parent device of the iGPU is the root port for which bridge_d3 is false. This accidentally enables the legacy PM method which conflicts with port PM and prevented the dGPU from powering on. Ported from amdgpu commit: drm/amdgpu: fix check for port PM availability from Peter Wu. Fixes: d3ac31f3 (drm/radeon: fix power state when port pm is unavailable (v2)) Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Peter Wu authored
commit 7ac33e47 upstream. The ATPX method does not always exist on the dGPU, it may be located at the iGPU. The parent device of the iGPU is the root port for which bridge_d3 is false. This accidentally enables the legacy PM method which conflicts with port PM and prevented the dGPU from powering on. Fixes: 1db4496f ("drm/amdgpu: fix power state when port pm is unavailable") Reported-and-tested-by:
Mike Lothian <mike@fireburn.co.uk> Signed-off-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Peter Wu authored
commit d3ac31f3 upstream. When PCIe port PM is not enabled (system BIOS is pre-2015 or the pcie_port_pm=off parameter is set), legacy ATPX PM should still be marked as supported. Otherwise the GPU can fail to power on after runtime suspend. This affected a Dell Inspiron 5548. Ideally the BIOS date in the PCI core is lowered to 2013 (the first year where hybrid graphics platforms using power resources was introduced), but that seems more risky at this point and would not solve the pcie_port_pm=off issue. v2: agd: fix typo Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Signed-off-by:
-
Peter Wu authored
commit 1db4496f upstream. When PCIe port PM is not enabled (system BIOS is pre-2015 or the pcie_port_pm=off parameter is set), legacy ATPX PM should still be marked as supported. Otherwise the GPU can fail to power on after runtime suspend. This affected a Dell Inspiron 5548. Ideally the BIOS date in the PCI core is lowered to 2013 (the first year where hybrid graphics platforms using power resources was introduced), but that seems more risky at this point and would not solve the pcie_port_pm=off issue. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98505Reported-and-tested-by:
Nayan Deshmukh <nayan26deshmukh@gmail.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
-
Matthew Auld authored
commit e411072d upstream. We grab the struct_mutex in intel_crtc_page_flip, but if we are wedged or a reset is in progress we bail early but never seem to actually release the lock. Fixes: 7f1847eb ("drm/i915: Simplify checking of GPU reset_counter in display pageflips") Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161128103648.9235-1-matthew.auld@intel.comReviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 2420489b upstream. On the DMA mapping error path, sg may be NULL (it has already been marked as the last scatterlist entry), and we should avoid dereferencing it again. Reported-by:
-
Marc Zyngier authored
commit 8ca18eec upstream. When we inject a level triggerered interrupt (and unless it is backed by the physical distributor - timer style), we request a maintenance interrupt. Part of the processing for that interrupt is to feed to the rest of KVM (and to the eventfd subsystem) the information that the interrupt has been EOIed. But that notification only makes sense for SPIs, and not PPIs (such as the PMU interrupt). Skip over the notification if the interrupt is not an SPI. Fixes: 140b086d ("KVM: arm/arm64: vgic-new: Add GICv2 world switch backend") Fixes: 59529f69 ("KVM: arm/arm64: vgic-new: Add GICv3 world switch backend") Reported-by:
Catalin Marinas <catalin.marinas@arm.com> Tested-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Brian Norris authored
commit fcd2042e upstream. SSIDs aren't guaranteed to be 0-terminated. Let's cap the max length when we print them out. This can be easily noticed by connecting to a network with a 32-octet SSID: [ 3903.502925] mwifiex_pcie 0000:01:00.0: info: trying to associate to '0123456789abcdef0123456789abcdef <uninitialized mem>' bssid xx:xx:xx:xx:xx:xx Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Johannes Thumshirn authored
commit e42010d8 upstream. Per PCIe spec r3.0, sec 2.3.1.1, the Read Completion Boundary (RCB) determines the naturally aligned address boundaries on which a Read Request may be serviced with multiple Completions: - For a Root Complex, RCB is 64 bytes or 128 bytes This value is reported in the Link Control Register Note: Bridges and Endpoints may implement a corresponding command bit which may be set by system software to indicate the RCB value for the Root Complex, allowing the Bridge/Endpoint to optimize its behavior when the Root Complex’s RCB is 128 bytes. - For all other system elements, RCB is 128 bytes Per sec 7.8.7, if a Root Port only supports a 64-byte RCB, the RCB of all downstream devices must be clear, indicating an RCB of 64 bytes. If the Root Port supports a 128-byte RCB, we may optionally set the RCB of downstream devices so they know they can generate larger Completions. Some BIOSes supply an _HPX that tells us to set RCB, even though the Root Port doesn't have RCB set, which may lead to Malformed TLP errors if the Endpoint generates completions larger than the Root Port can handle. The IBM x3850 X6 with BIOS version -[A8E120CUS-1.30]- 08/22/2016 supplies such an _HPX and a Mellanox MT27500 ConnectX-3 device fails to initialize: mlx4_core 0000:41:00.0: command 0xfff timed out (go bit not cleared) mlx4_core 0000:41:00.0: device is going to be reset mlx4_core 0000:41:00.0: Failed to obtain HW semaphore, aborting mlx4_core 0000:41:00.0: Fail to reset HCA ------------[ cut here ]------------ kernel BUG at drivers/net/ethernet/mellanox/mlx4/catas.c:193! After 6cd33649 ("PCI: Add pci_configure_device() during enumeration") and 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link"), we apply _HPX settings to *all* devices, not just those hot-added after boot. Before 7a1562d4, we didn't touch the Mellanox RCB, and the device worked. After 7a1562d4, we set its RCB to 128, and it failed. Set the RCB to 128 iff the Root Port supports a 128-byte RCB. Otherwise, set RCB to 64 bytes. This effectively ignores what _HPX tells us about RCB. Note that this change only affects _HPX handling. If we have no _HPX, this does nothing with RCB. [bhelgaas: changelog, clear RCB if not set for Root Port] Fixes: 6cd33649 ("PCI: Add pci_configure_device() during enumeration") Fixes: 7a1562d4 ("PCI: Apply _HPX Link Control settings to all devices with a link") Link: https://bugzilla.kernel.org/show_bug.cgi?id=187781Tested-by:
Frank Danapfel <fdanapfe@redhat.com> Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Myron Stowe <myron.stowe@redhat.com> Signed-off-by:
-
Johannes Thumshirn authored
commit e784930b upstream. Export pcie_find_root_port() so we can use it outside of PCIe-AER error injection. Signed-off-by:
-
Michal Hocko authored
commit 20ab67a5 upstream. Commit 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") has made the workingset shadow nodes shrinker memcg aware. The implementation is not correct though because memcg_kmem_enabled() might become true while we are doing a global reclaim when the sc->memcg might be NULL which is exactly what Marek has seen: BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff8122d520>] mem_cgroup_node_nr_lru_pages+0x20/0x40 PGD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 60 Comm: kswapd0 Tainted: G O 4.8.10-12.pvops.qubes.x86_64 #1 task: ffff880011863b00 task.stack: ffff880011868000 RIP: mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP: e02b:ffff88001186bc70 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88001186bd20 RCX: 0000000000000002 RDX: 000000000000000c RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001186bc70 R08: 28f5c28f5c28f5c3 R09: 0000000000000000 R10: 0000000000006c34 R11: 0000000000000333 R12: 00000000000001f6 R13: ffffffff81c6f6a0 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880013c00000(0000) knlGS:ffff880013d00000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000400 CR3: 00000000122f2000 CR4: 0000000000042660 Call Trace: count_shadow_nodes+0x9a/0xa0 shrink_slab.part.42+0x119/0x3e0 shrink_node+0x22c/0x320 kswapd+0x32c/0x700 kthread+0xd8/0xf0 ret_from_fork+0x1f/0x40 Code: 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 3b 35 dd eb b1 00 55 48 89 e5 73 2c 89 d2 31 c9 31 c0 4c 63 ce 48 0f a3 ca 73 13 <4a> 8b b4 cf 00 04 00 00 41 89 c8 4a 03 84 c6 80 00 00 00 83 c1 RIP mem_cgroup_node_nr_lru_pages+0x20/0x40 RSP <ffff88001186bc70> CR2: 0000000000000400 ---[ end trace 100494b9edbdfc4d ]--- This patch fixes the issue by checking sc->memcg rather than memcg_kmem_enabled() which is sufficient because shrink_slab makes sure that only memcg aware shrinkers will get non-NULL memcgs and only if memcg_kmem_enabled is true. Fixes: 0a6b76dd ("mm: workingset: make shadow node shrinker memcg aware") Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.orgSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Tested-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Ding Tianhong authored
commit bedc1969 upstream. Carrying out the following steps results in a softlockup in the RCU callback-offload (rcuo) kthreads: 1. Connect to ixgbevf, and set the speed to 10Gb/s. 2. Use ifconfig to bring the nic up and down repeatedly. [ 317.005148] IPv6: ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 368.106005] BUG: soft lockup - CPU#1 stuck for 22s! [rcuos/1:15] [ 368.106005] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 368.106005] task: ffff88057dd8a220 ti: ffff88057dd9c000 task.ti: ffff88057dd9c000 [ 368.106005] RIP: 0010:[<ffffffff81579e04>] [<ffffffff81579e04>] fib_table_lookup+0x14/0x390 [ 368.106005] RSP: 0018:ffff88061fc83ce8 EFLAGS: 00000286 [ 368.106005] RAX: 0000000000000001 RBX: 00000000020155c0 RCX: 0000000000000001 [ 368.106005] RDX: ffff88061fc83d50 RSI: ffff88061fc83d70 RDI: ffff880036d11a00 [ 368.106005] RBP: ffff88061fc83d08 R08: 0000000000000001 R09: 0000000000000000 [ 368.106005] R10: ffff880036d11a00 R11: ffffffff819e0900 R12: ffff88061fc83c58 [ 368.106005] R13: ffffffff816154dd R14: ffff88061fc83d08 R15: 00000000020155c0 [ 368.106005] FS: 0000000000000000(0000) GS:ffff88061fc80000(0000) knlGS:0000000000000000 [ 368.106005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 368.106005] CR2: 00007f8c2aee9c40 CR3: 000000057b222000 CR4: 00000000000407e0 [ 368.106005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.106005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.106005] Stack: [ 368.106005] 00000000010000c0 ffff88057b766000 ffff8802e380b000 ffff88057af03e00 [ 368.106005] ffff88061fc83dc0 ffffffff815349a6 ffff88061fc83d40 ffffffff814ee146 [ 368.106005] ffff8802e380af00 00000000e380af00 ffffffff819e0900 020155c0010000c0 [ 368.106005] Call Trace: [ 368.106005] <IRQ> [ 368.106005] [ 368.106005] [<ffffffff815349a6>] ip_route_input_noref+0x516/0xbd0 [ 368.106005] [<ffffffff814ee146>] ? skb_release_data+0xd6/0x110 [ 368.106005] [<ffffffff814ee20a>] ? kfree_skb+0x3a/0xa0 [ 368.106005] [<ffffffff8153698f>] ip_rcv_finish+0x29f/0x350 [ 368.106005] [<ffffffff81537034>] ip_rcv+0x234/0x380 [ 368.106005] [<ffffffff814fd656>] __netif_receive_skb_core+0x676/0x870 [ 368.106005] [<ffffffff814fd868>] __netif_receive_skb+0x18/0x60 [ 368.106005] [<ffffffff814fe4de>] process_backlog+0xae/0x180 [ 368.106005] [<ffffffff814fdcb2>] net_rx_action+0x152/0x240 [ 368.106005] [<ffffffff81077b3f>] __do_softirq+0xef/0x280 [ 368.106005] [<ffffffff8161619c>] call_softirq+0x1c/0x30 [ 368.106005] <EOI> [ 368.106005] [ 368.106005] [<ffffffff81015d95>] do_softirq+0x65/0xa0 [ 368.106005] [<ffffffff81077174>] local_bh_enable+0x94/0xa0 [ 368.106005] [<ffffffff81114922>] rcu_nocb_kthread+0x232/0x370 [ 368.106005] [<ffffffff81098250>] ? wake_up_bit+0x30/0x30 [ 368.106005] [<ffffffff811146f0>] ? rcu_start_gp+0x40/0x40 [ 368.106005] [<ffffffff8109728f>] kthread+0xcf/0xe0 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 [ 368.106005] [<ffffffff816147d8>] ret_from_fork+0x58/0x90 [ 368.106005] [<ffffffff810971c0>] ? kthread_create_on_node+0x140/0x140 ==================================cut here============================== It turns out that the rcuos callback-offload kthread is busy processing a very large quantity of RCU callbacks, and it is not reliquishing the CPU while doing so. This commit therefore adds an cond_resched_rcu_qs() within the loop to allow other tasks to run. Signed-off-by:
Ding Tianhong <dingtianhong@huawei.com> [ paulmck: Substituted cond_resched_rcu_qs for cond_resched. ] Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Dhaval Giani <dhaval.giani@oracle.com> Signed-off-by:
-
Dmitry Torokhov authored
commit e9fb7cc6 upstream. BYD automatic protocol detection is extremely unreliable and is often triggers false positives on regular mice, Sentelic touchpads, and other devices. BYD has several documents that have recommended detection sequence, but they conflict with each other and, as far as I can see, still would not produce unique enough output to reliably differentiate BYD from other PS/2 devices. OEMs sourcing BYD devices also do not do us any favors by not supplying any reasonable DMI data and instead leaving turds like "To Be Filled By O.E.M." in place of vendor data, or "System Serial Number" as serial number. On top of that BYD is not truly modern multitouch controller, but rather a single-touch transitional device that only reports absolute coordinates at the beginning of finger contact and then reverts to reporting displacements, and thus not very precise; the only benefit from using BYD mode vs the legacy PS/2 mode is possibility of edge scrolling. Given the above, and the fact that BYD devices are somewhat uncommon, let's disable automatic detection of BYD devices. Users who know they have BYD trackpads or want to experiment can attempt to activate BYD protocol via sysfs: echo -n "byd" > /sys/bus/serio/devices/serio1/drvctl Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=151691 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=175421 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=120781 Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=121281 Fixes: 98ee3771 ("Input: byd - add BYD PS/2 touchpad driver") Reviewed-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ping Cheng authored
commit 2425f180 upstream. 0x275 is used by KEY_FASTREVERSE. Fixes: 48832694 ("Input: add HDMI CEC specific keycodes") Signed-off-by:
Ping Cheng <ping.cheng@wacom.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Miklos Szeredi authored
commit c4fcfc16 upstream. Handling of recursion in d_real() is completely broken. Recursion is only done in the 'inode != NULL' case. But when opening the file we have 'inode == NULL' hence d_real() will return an overlay dentry. This won't work since overlayfs doesn't define its own file operations, so all file ops will fail. Fix by doing the recursion first and the check against the inode second. Bash script to reproduce the issue written by Quentin: - 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - - tmpdir=$(mktemp -d) pushd ${tmpdir} mkdir -p {upper,lower,work} echo -n 'rocks' > lower/ksplice mount -t overlay level_zero upper -o lowerdir=lower,upperdir=upper,workdir=work cat upper/ksplice tmpdir2=$(mktemp -d) pushd ${tmpdir2} mkdir -p {upper,work} mount -t overlay level_one upper -o lowerdir=${tmpdir}/upper,upperdir=upper,workdir=work ls -l upper/ksplice cat upper/ksplice - 8< - - - - - 8< - - - - - 8< - - - - - 8< - - - - Reported-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 2d902671 ("vfs: merge .d_select_inode() into .d_real()") Signed-off-by:
-
Kirill A. Shutemov authored
commit 5cbc198a upstream. Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or PUD_SIZE), not in PAGE_SIZE as other types of pages. This means we cannot user page_to_pgoff() to check whether we've got the right page for the radix-tree index. Let's introduce page_to_index() which would return radix-tree index for given page. We will be able to get rid of this once hugetlb will be switched to multi-order entries. Fixes: fc127da0 ("truncate: handle file thp") Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Doug Nelson <doug.nelson@intel.com> Tested-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Dmitry Vyukov authored
commit 045d599a upstream. kasan_global struct is part of compiler/runtime ABI. gcc revision 241983 has added a new field to kasan_global struct. Update kernel definition of kasan_global struct to include the new field. Without this patch KASAN is broken with gcc 7. Link: http://lkml.kernel.org/r/1479219743-28682-1-git-send-email-dvyukov@google.comSigned-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Signed-off-by:
-
Takashi Iwai authored
commit 529e71e1 upstream. The zram hot removal code calls idr_remove() even when zram_remove() returns an error (typically -EBUSY). This results in a leftover at the device release, eventually leading to a crash when the module is reloaded. As described in the bug report below, the following procedure would cause an Oops with zram: - provision three zram devices via modprobe zram num_devices=3 - configure a size for each device + echo "1G" > /sys/block/$zram_name/disksize - mkfs and mount zram0 only - attempt to hot remove all three devices + echo 2 > /sys/class/zram-control/hot_remove + echo 1 > /sys/class/zram-control/hot_remove + echo 0 > /sys/class/zram-control/hot_remove - zram0 removal fails with EBUSY, as expected - unmount zram0 - try zram0 hot remove again + echo 0 > /sys/class/zram-control/hot_remove - fails with ENODEV (unexpected) - unload zram kernel module + completes successfully - zram0 device node still exists - attempt to mount /dev/zram0 + mount command is killed + following BUG is encountered BUG: unable to handle kernel paging request at ffffffffa0002ba0 IP: get_disk+0x16/0x50 Oops: 0000 [#1] SMP CPU: 0 PID: 252 Comm: mount Not tainted 4.9.0-rc6 #176 Call Trace: exact_lock+0xc/0x20 kobj_lookup+0xdc/0x160 get_gendisk+0x2f/0x110 __blkdev_get+0x10c/0x3c0 blkdev_get+0x19d/0x2e0 blkdev_open+0x56/0x70 do_dentry_open.isra.19+0x1ff/0x310 vfs_open+0x43/0x60 path_openat+0x2c9/0xf30 do_filp_open+0x79/0xd0 do_sys_open+0x114/0x1e0 SyS_open+0x19/0x20 entry_SYSCALL_64_fastpath+0x13/0x94 This patch adds the proper error check in hot_remove_store() not to call idr_remove() unconditionally. Fixes: 17ec4cd9 ("zram: don't call idr_remove() from zram_remove()") Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1010970 Link: http://lkml.kernel.org/r/20161121132140.12683-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
David Disseldorp <ddiss@suse.de> Reported-by:
Minchan Kim <minchan@kernel.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 655548bf upstream. The following program triggers BUG() in munlock_vma_pages_range(): // autogenerated by syzkaller (http://github.com/google/syzkaller) #include <sys/mman.h> int main() { mmap((void*)0x20105000ul, 0xc00000ul, 0x2ul, 0x2172ul, -1, 0); mremap((void*)0x201fd000ul, 0x4000ul, 0xc00000ul, 0x3ul, 0x203f0000ul); return 0; } The test-case constructs the situation when munlock_vma_pages_range() finds PTE-mapped THP-head in the middle of page table and, by mistake, skips HPAGE_PMD_NR pages after that. As result, on the next iteration it hits the middle of PMD-mapped THP and gets upset seeing mlocked tail page. The solution is only skip HPAGE_PMD_NR pages if the THP was mlocked during munlock_vma_page(). It would guarantee that the page is PMD-mapped as we never mlock PTE-mapeed THPs. Fixes: e90309c9 ("thp: allow mlocked THP again") Link: http://lkml.kernel.org/r/20161115132703.7s7rrgmwttegcdh4@black.fi.intel.comSigned-off-by:
-
Jérémy Lefaure authored
commit e1465d12 upstream. Commit b46e756f ("thp: extract khugepaged from mm/huge_memory.c") moved code from huge_memory.c to khugepaged.c. Some of this code should be compiled only when CONFIG_SYSFS is enabled but the condition around this code was not moved into khugepaged.c. The result is a compilation error when CONFIG_SYSFS is disabled: mm/built-in.o: In function `khugepaged_defrag_store': khugepaged.c:(.text+0x2d095): undefined reference to `single_hugepage_flag_store' mm/built-in.o: In function `khugepaged_defrag_show': khugepaged.c:(.text+0x2d0ab): undefined reference to `single_hugepage_flag_show' This commit adds the #ifdef CONFIG_SYSFS around the code related to sysfs. Link: http://lkml.kernel.org/r/20161114203448.24197-1-jeremy.lefaure@lse.epita.frSigned-off-by:
Jérémy Lefaure <jeremy.lefaure@lse.epita.fr> Acked-by:
Hillf Danton <hillf.zj@alibaba-inc.com> Signed-off-by:
-
Vineet Gupta authored
commit 3c7c7a2f upstream. Apparenty this is coming in the way of gcc fix which inhibits the usage of LP_COUNT as a gpr. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Yuriy Kolerov authored
commit 6a8b2ca7 upstream. commit 1c3c9093 broke PAE40. Macro pfn_pte(pfn, prot) creates paddr from pfn, but the page shift was getting truncated to 32 bits since we lost the proper cast to 64 bits (for PAE400 Instead of reverting that commit, use a better helper which is 32/64 bits safe just like ARM implementation. Fixes: 1c3c9093 ("ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS") Signed-off-by:
Yuriy Kolerov <yuriy.kolerov@synopsys.com> [vgupta: massaged changelog] Signed-off-by:
-
Johannes Thumshirn authored
commit 208da78e upstream. Commit 540eb1ee ("scsi: libfc: fix seconds_since_last_reset calculation") removed the use of 'struct timespec' from fc_get_host_stats(). This broke the output of 'fcoeadm -s' after kernel 4.8-rc1. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Hannes Reinecke authored
commit 7630b3a5 upstream. Older controllers use SCSI target id '0' for the first internal disk. As the controllers are now placed on the same bus as the internal disks this leads to a clash with the SCSI target id of controller. This patch checks the SCSI revision, and moves older controller to bus '3' to be compatible with older releases and avoid this problem. [mkp: fixed uninitialized variable] Fixes: 09371d62 ("hpsa: Change SAS transport devices to bus 0.") Signed-off-by:
Hannes Reinecke <hare@suse.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Hannes Reinecke authored
commit e0029dcb upstream. There's a typo in ata_gen_passthru_sense(), where the first byte would be overwritten incorrectly later on. Reported-by:
Charles Machalow <csm10495@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 02 Dec, 2016 9 commits
-
-
Greg Kroah-Hartman authored
-
Suganath Prabu S authored
commit 7ff723ad upstream. While issuing any ATA passthrough command to firmware the driver will block the device. But it will unblock the device only if the I/O completes through the ISR path. If a controller reset occurs before command completion the device will remain in blocked state. Make sure we unblock the device following a controller reset if an ATA passthrough command was queued. [mkp: clarified patch description] Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset") Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Eric Dumazet authored
commit c9b8af13 upstream. Andre Noll reported panics after my recent fix (commit 34fad54c "net: __skb_flow_dissect() must cap its return value") After some more headaches, Alexander root caused the problem to init_default_flow_dissectors() being called too late, in case a network driver like IGB is not a module and receives DHCP message very early. Fix is to call init_default_flow_dissectors() much earlier, as it is a core infrastructure and does not depend on another kernel service. Fixes: 06635a35 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Andre Noll <maan@tuebingen.mpg.de> Diagnosed-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michal Hocko authored
31e49bfd ("mm, oom: protect !costly allocations some more for !CONFIG_COMPACTION") was an attempt to reduce chances of pre-mature OOM killer invocation for high order requests. It seemed to work for most users just fine but it is far from bullet proof and obviously not sufficient for Marc who has reported pre-mature OOM killer invocations with 4.8 based kernels. 4.9 will all the compaction improvements seems to be behaving much better but that would be too intrusive to backport to 4.8 stable kernels. Instead this patch simply never declares OOM for !costly high order requests. We rely on order-0 requests to do that in case we are really out of memory. Order-0 requests are much more common and so a risk of a livelock without any way forward is highly unlikely. Reported-by:
Marc MERLIN <marc@merlins.org> Tested-by:
-
Oliver Hartkopp authored
commit 5499a6b2 upstream. Since commit 6f3b911d ("can: bcm: add support for CAN FD frames") the CAN broadcast manager supports CAN and CAN FD data frames. As these data frames are embedded in struct can[fd]_frames which have a different length the access to the provided array of CAN frames became dependend of op->cfsiz. By using a struct canfd_frame pointer for the array of CAN frames the new offset calculation based on op->cfsiz was accidently applied to CAN FD frame element lengths. This fix makes the pointer to the arrays of the different CAN frame types a void pointer so that the offset calculation in bytes accesses the correct CAN frame elements. Reference: http://marc.info/?l=linux-netdev&m=147980658909653Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Tested-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Oliver O'Halloran authored
commit a1ff5741 upstream. When configured with CONFIG_PPC_EARLY_DEBUG_OPAL=y the kernel expects the OPAL entry and base addresses to be passed in r8 and r9 respectively. Currently the wrapper does not attempt to restore these values before entering the decompressed kernel which causes the kernel to branch into whatever happens to be in r9 when doing a write to the OPAL console in early boot. This patch adds a platform_ops hook that can be used to branch into the new kernel. The OPAL console driver patches this at runtime so that if the console is used it will be restored just prior to entering the kernel. Fixes: 656ad58e ("powerpc/boot: Add OPAL console to epapr wrappers") Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 984d7a1e upstream. With commit e58e87ad ("powerpc/mm: Update _PAGE_KERNEL_RO") we started using the ppp value 0b110 to map kernel readonly. But that facility was only added as part of ISA 2.04. For earlier ISA version only supported ppp bit value for readonly mapping is 0b011. (This implies both user and kernel get mapped using the same ppp bit value for readonly mapping.). Update the code such that for earlier architecture version we use ppp value 0b011 for readonly mapping. We don't differentiate between power5+ and power5 here and apply the new ppp bits only from power6 (ISA 2.05). This keep the changes minimal. This fixes issue with PS3 spu usage reported at https://lkml.kernel.org/r/rep.1421449714.geoff@infradead.org Fixes: e58e87ad ("powerpc/mm: Update _PAGE_KERNEL_RO") Tested-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 7a43906f upstream. There is a new bit, LPCR_PECE_HVEE (Hypervisor Virtualization Exit Enable), which controls wakeup from STOP states on Hypervisor Virtualization Interrupts (which happen to also be all external interrupts in host or bare metal mode). It needs to be set or we will miss wakeups. Fixes: 9baaef0a ("powerpc/irq: Add support for HV virtualization interrupts") Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rename it to HVEE to match the name in the ISA] Signed-off-by:
-
Dan Williams authored
commit 4cb19355 upstream. The device-dax implementation originally tried to be tricky and allow private read-only mappings, but in the process allowed writable MAP_PRIVATE + MAP_NORESERVE mappings. For simplicity and predictability just fail all private mapping attempts since device-dax memory is statically allocated and will never support overcommit. Cc: Dave Hansen <dave.hansen@linux.intel.com> Fixes: dee41079 ("/dev/dax, core: file operations and dax-mmap") Reported-by:
Pawel Lebioda <pawel.lebioda@intel.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
