Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

Group boards from the same manufacturer together on the "Devices:" line
to avoid repeating the "[Manufacturer]" tag unnecessarily.

Also fix a couple of typos in the board names on the "Devices:" line:
"p16r16dio" was used twice, but one of them should be "p8r8dio";
"prearl-mm-p" should be "pearl-mm-p".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.

Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.

Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the supported devices listed on the "Devices:" line currently use
the comedi driver name as the comedi board name.  Historically, this
documented the name that should be passed to the "comedi_config" program
to "attach" the device via the COMEDI_DEVCONFIG ioctl.  Some drivers
expected the driver name and others expected the board name.  Since this
driver no longer supports the legacy "attach" mechanism, change the
"Devices:" list to show the board names, as that is probably more
useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style.  In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

Change the original "Devices:" line to a "Description:" line.

Remove the "Version:" line as we don't care about driver version numbers
in the kernel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a module containing common code for the "das08_cs", "das08_isa"
and "das08_pci" comedi drivers.  It does not need its own comedi
"driver" comment block, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style.  In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

The original comment indicated the number of input and output channels
in each item on the "Devices:" line.  Move this information into a
separate paragraph moved from a block comment found elsewhere in the
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line.  The line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style.  In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:

  [Manufacturer] BOARD-NAME (comedi-board-name)

The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used.  The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).

The original comment indicated the number of DIO channels in each item
on the "Devices:" line.  Move this information into separate paragraphs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Before:
      1 ERROR: code indent should use tabs where possible
      1 WARNING: please, no spaces at the start of a line

After:
  (none)
Signed-off-by: David Decotigny <ddecotig@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 This is a patch to the comedi_bond.c file that fixes up a blank line after
 declaration warning found by the checkpatch.pl tool
Signed-off-by: Frederic Jacob <frederic.jacob.78@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

 This is a patch to the s626.c file that fixes a spacing error found by the checkpatch.pl tool
Signed-off-by: Jacob L Close <drumber01@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt used by this driver is shared. If the board did not cause
the interrupt the driver should return IRQ_NONE so that another driver
can handle it. Fix the interrupt handler so this happens.

Tidy up the interrupt handler a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>