- 06 Aug, 2019 23 commits
-
-
Vladimir Oltean authored
After a meta frame is received, it is associated with the cached sp->data->stampable_skb from the DSA tagger private structure. Cached means its refcount is incremented with skb_get() in order for dsa_switch_rcv() to not free it when the tagger .rcv returns NULL. The mistake is that skb_unref() is not the correct function to use. It will correctly decrement the refcount (which will go back to zero) but the skb memory will not be freed. That is the job of kfree_skb(), which also calls skb_unref(). But it turns out that freeing the cached stampable_skb is in fact not necessary. It is still a perfectly valid skb, and now it is even annotated with the partial RX timestamp. So remove the skb_copy() altogether and simply pass the stampable_skb with a refcount of 1 (incremented by us, decremented by dsa_switch_rcv) up the stack. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The IS_ERR_OR_NULL(priv->clock) check inside sja1105_ptp_clock_unregister() is preventing cancel_delayed_work_sync from actually being run. Additionally, sja1105_ptp_clock_unregister() does not actually get run, when placed in sja1105_remove(). The DSA switch gets torn down, but the sja1105 module does not get unregistered. So sja1105_ptp_clock_unregister needs to be moved to sja1105_teardown, to be symmetrical with sja1105_ptp_clock_register which is called from the DSA sja1105_setup. It is strange to fix a "fixes" patch, but the probe failure can only be seen when the attached PHY does not respond to MDIO (issue which I can't pinpoint the reason to) and it goes away after I power-cycle the board. This time the patch was validated on a failing board, and the kernel panic from the fixed commit's message can no longer be seen. Fixes: 29dd908d ("net: dsa: sja1105: Cancel PTP delayed work on unregister") Signed-off-by:
-
Vladimir Oltean authored
It looks like the FDB dump taken from first-generation switches also contains information on whether entries are static or not. So use that instead of searching through the driver's tables. Fixes: d7637782 ("net: dsa: sja1105: Implement is_static for FDB entries on E/T") Signed-off-by:
-
Vladimir Oltean authored
When put under a bridge with vlan_filtering 0, the SJA1105 ports will flood all traffic as if learning was broken. This is because learning interferes with the rx_vid's configured by dsa_8021q as unique pvid's. So learning technically still *does* work, it's just that the learnt entries never get matched due to their unique VLAN ID. The setting that saves the day is Shared VLAN Learning, which on this switch family works exactly as desired: VLAN tagging still works (untagged traffic gets the correct pvid) and FDB entries are still populated with the correct contents including VID. Also, a frame cannot violate the forwarding domain restrictions enforced by its classified VLAN. It is just that the VID is ignored when looking up the FDB for taking a forwarding decision (selecting the egress port). This patch activates SVL, and the result is that frames with a learnt DMAC are no longer flooded in the scenario described above. Now exactly *because* SVL works as desired, we have to revisit some earlier patches: - It is no longer necessary to manipulate the VID of the 'bridge fdb {add,del}' command when vlan_filtering is off. This is because now, SVL is enabled for that case, so the actual VID does not matter*. - It is still desirable to hide dsa_8021q VID's in the FDB dump callback. But right now the dump callback should no longer hide duplicates (one per each front panel port's pvid, plus one for the VLAN that the CPU port is going to tag a TX frame with), because there shouldn't be any (the switch will match a single FDB entry no matter its VID anyway). * Not really... It's no longer necessary to transform a 'bridge fdb add' into 5 fdb add operations, but the user might still add a fdb entry with any vid, and all of them would appear as duplicates in 'bridge fdb show'. So force a 'bridge fdb add' to insert the VID of 0**, so that we can prune the duplicates at insertion time. ** The VID of 0 is better than 1 because it is always guaranteed to be in the ports' hardware filter. DSA also avoids putting the VID inside the netlink response message towards the bridge driver when we return this particular VID, which makes it suitable for FDB entries learnt with vlan_filtering off. Fixes: 227d07a0 ("net: dsa: sja1105: Add support for traffic through standalone ports") Signed-off-by:Georg Waibel <georg.waibel@sensor-technik.de> Signed-off-by:
-
Nishka Dasgupta authored
Each iteration of for_each_available_child_of_node() puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put() before the return. Additionally, the local variable ports in the function qca8k_setup_mdio_bus() takes the return value of of_get_child_by_name(), which gets a node but does not put it. If the function returns without putting ports, it may cause a memory leak. Hence put ports before the mid-loop return statement, and also outside the loop after its last usage in this function. Issues found with Coccinelle. Signed-off-by:
Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by:
-
David S. Miller authored
Vlad Buslov says: ==================== action fixes for flow_offload infra compatibility Fix rcu warnings due to usage of action helpers that expect rcu read lock protection from rtnl-protected context of flow_offload infra. ==================== Signed-off-by: -
Vlad Buslov authored
Recently implemented support for sample action in flow_offload infra leads to following rcu usage warning: [ 1938.234856] ============================= [ 1938.234858] WARNING: suspicious RCU usage [ 1938.234863] 5.3.0-rc1+ #574 Not tainted [ 1938.234866] ----------------------------- [ 1938.234869] include/net/tc_act/tc_sample.h:47 suspicious rcu_dereference_check() usage! [ 1938.234872] other info that might help us debug this: [ 1938.234875] rcu_scheduler_active = 2, debug_locks = 1 [ 1938.234879] 1 lock held by tc/19540: [ 1938.234881] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1938.234900] stack backtrace: [ 1938.234905] CPU: 2 PID: 19540 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1938.234908] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1938.234911] Call Trace: [ 1938.234922] dump_stack+0x85/0xc0 [ 1938.234930] tc_setup_flow_action+0xed5/0x2040 [ 1938.234944] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1938.234965] fl_change+0xd24/0x1b30 [cls_flower] [ 1938.234990] tc_new_tfilter+0x3e0/0x970 [ 1938.235021] ? tc_del_tfilter+0x720/0x720 [ 1938.235028] rtnetlink_rcv_msg+0x389/0x4b0 [ 1938.235038] ? netlink_deliver_tap+0x95/0x400 [ 1938.235044] ? rtnl_dellink+0x2d0/0x2d0 [ 1938.235053] netlink_rcv_skb+0x49/0x110 [ 1938.235063] netlink_unicast+0x171/0x200 [ 1938.235073] netlink_sendmsg+0x224/0x3f0 [ 1938.235091] sock_sendmsg+0x5e/0x60 [ 1938.235097] ___sys_sendmsg+0x2ae/0x330 [ 1938.235111] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235125] ? __handle_mm_fault+0x12cd/0x19e0 [ 1938.235138] ? find_held_lock+0x2b/0x80 [ 1938.235147] ? do_user_addr_fault+0x22d/0x490 [ 1938.235160] __sys_sendmsg+0x59/0xa0 [ 1938.235178] do_syscall_64+0x5c/0xb0 [ 1938.235187] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1938.235192] RIP: 0033:0x7ff9a4d597b8 [ 1938.235197] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1938.235200] RSP: 002b:00007ffcfe381c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1938.235205] RAX: ffffffffffffffda RBX: 000000005d4497f9 RCX: 00007ff9a4d597b8 [ 1938.235208] RDX: 0000000000000000 RSI: 00007ffcfe381cb0 RDI: 0000000000000003 [ 1938.235211] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1938.235214] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1938.235217] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_sample_psample_group() helper to allow using it from both rtnl and rcu protected contexts. Fixes: a7a7be60 ("net/sched: add sample action to the hardware intermediate representation") Signed-off-by:Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
-
Vlad Buslov authored
Recently implemented support for police action in flow_offload infra leads to following rcu usage warning: [ 1925.881092] ============================= [ 1925.881094] WARNING: suspicious RCU usage [ 1925.881098] 5.3.0-rc1+ #574 Not tainted [ 1925.881100] ----------------------------- [ 1925.881104] include/net/tc_act/tc_police.h:57 suspicious rcu_dereference_check() usage! [ 1925.881106] other info that might help us debug this: [ 1925.881109] rcu_scheduler_active = 2, debug_locks = 1 [ 1925.881112] 1 lock held by tc/18591: [ 1925.881115] #0: 00000000b03cb918 (rtnl_mutex){+.+.}, at: tc_new_tfilter+0x47c/0x970 [ 1925.881124] stack backtrace: [ 1925.881127] CPU: 2 PID: 18591 Comm: tc Not tainted 5.3.0-rc1+ #574 [ 1925.881130] Hardware name: Supermicro SYS-2028TP-DECR/X10DRT-P, BIOS 2.0b 03/30/2017 [ 1925.881132] Call Trace: [ 1925.881138] dump_stack+0x85/0xc0 [ 1925.881145] tc_setup_flow_action+0x1771/0x2040 [ 1925.881155] fl_hw_replace_filter+0x11f/0x2e0 [cls_flower] [ 1925.881175] fl_change+0xd24/0x1b30 [cls_flower] [ 1925.881200] tc_new_tfilter+0x3e0/0x970 [ 1925.881231] ? tc_del_tfilter+0x720/0x720 [ 1925.881243] rtnetlink_rcv_msg+0x389/0x4b0 [ 1925.881250] ? netlink_deliver_tap+0x95/0x400 [ 1925.881257] ? rtnl_dellink+0x2d0/0x2d0 [ 1925.881264] netlink_rcv_skb+0x49/0x110 [ 1925.881275] netlink_unicast+0x171/0x200 [ 1925.881284] netlink_sendmsg+0x224/0x3f0 [ 1925.881299] sock_sendmsg+0x5e/0x60 [ 1925.881305] ___sys_sendmsg+0x2ae/0x330 [ 1925.881309] ? task_work_add+0x43/0x50 [ 1925.881314] ? fput_many+0x45/0x80 [ 1925.881329] ? __lock_acquire+0x248/0x1930 [ 1925.881342] ? find_held_lock+0x2b/0x80 [ 1925.881347] ? task_work_run+0x7b/0xd0 [ 1925.881359] __sys_sendmsg+0x59/0xa0 [ 1925.881375] do_syscall_64+0x5c/0xb0 [ 1925.881381] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1925.881384] RIP: 0033:0x7feb245047b8 [ 1925.881388] Code: 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 65 8f 0c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 48 83 ec 28 89 54 [ 1925.881391] RSP: 002b:00007ffc2d2a5788 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 1925.881395] RAX: ffffffffffffffda RBX: 000000005d4497ed RCX: 00007feb245047b8 [ 1925.881398] RDX: 0000000000000000 RSI: 00007ffc2d2a57f0 RDI: 0000000000000003 [ 1925.881400] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000006 [ 1925.881403] R10: 0000000000404ec2 R11: 0000000000000246 R12: 0000000000000001 [ 1925.881406] R13: 0000000000480640 R14: 0000000000000012 R15: 0000000000000001 Change tcf_police_rate_bytes_ps() and tcf_police_tcfp_burst() helpers to allow using them from both rtnl and rcu protected contexts. Fixes: 8c8cfc6e ("net/sched: add police action to the hardware intermediate representation") Signed-off-by: -
David S. Miller authored
Jiangfeng Xiao says: ==================== net: hisilicon: Fix a few problems with hip04_eth During the use of the hip04_eth driver, several problems were found, which solved the hip04_tx_reclaim reentry problem, fixed the problem that hip04_mac_start_xmit never returns NETDEV_TX_BUSY and the dma_map_single failed on the arm64 platform. ==================== Signed-off-by: -
Jiangfeng Xiao authored
On the arm64 platform, executing "ifconfig eth0 up" will fail, returning "ifconfig: SIOCSIFFLAGS: Input/output error." ndev->dev is not initialized, dma_map_single->get_dma_ops-> dummy_dma_ops->__dummy_map_page will return DMA_ERROR_CODE directly, so when we use dma_map_single, the first parameter is to use the device of platform_device. Signed-off-by:
Jiangfeng Xiao <xiaojiangfeng@huawei.com> Signed-off-by:
-
Jiangfeng Xiao authored
TX_DESC_NUM is 256, in tx_count, the maximum value of mod(TX_DESC_NUM - 1) is 254, the variable "count" in the hip04_mac_start_xmit function is never equal to (TX_DESC_NUM - 1), so hip04_mac_start_xmit never return NETDEV_TX_BUSY. tx_count is modified to mod(TX_DESC_NUM) so that the maximum value of tx_count can reach (TX_DESC_NUM - 1), then hip04_mac_start_xmit can reurn NETDEV_TX_BUSY. Signed-off-by:
-
Jiangfeng Xiao authored
If hip04_tx_reclaim is interrupted while it is running and then __napi_schedule continues to execute hip04_rx_poll->hip04_tx_reclaim, reentrancy occurs and oops is generated. So you need to mask the interrupt during the hip04_tx_reclaim run. The kernel oops exception stack is as follows: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = c0003000 [00000050] *pgd=80000000a04003, *pmd=00000000 Internal error: Oops: 206 [#1] SMP ARM Modules linked in: hip04_eth mtdblock mtd_blkdevs mtd ohci_platform ehci_platform ohci_hcd ehci_hcd vfat fat sd_mod usb_storage scsi_mod usbcore usb_common CPU: 0 PID: 0 Comm: swapper/0 Tainted: G O 4.4.185 #1 Hardware name: Hisilicon A15 task: c0a250e0 task.stack: c0a00000 PC is at hip04_tx_reclaim+0xe0/0x17c [hip04_eth] LR is at hip04_tx_reclaim+0x30/0x17c [hip04_eth] pc : [<bf30c3a4>] lr : [<bf30c2f4>] psr: 600e0313 sp : c0a01d88 ip : 00000000 fp : c0601f9c r10: 00000000 r9 : c3482380 r8 : 00000001 r7 : 00000000 r6 : 000000e1 r5 : c3482000 r4 : 0000000c r3 : f2209800 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 32c5387d Table: 03d28c80 DAC: 55555555 Process swapper/0 (pid: 0, stack limit = 0xc0a00190) Stack: (0xc0a01d88 to 0xc0a02000) [<bf30c3a4>] (hip04_tx_reclaim [hip04_eth]) from [<bf30d2e0>] (hip04_rx_poll+0x88/0x368 [hip04_eth]) [<bf30d2e0>] (hip04_rx_poll [hip04_eth]) from [<c04c2d9c>] (net_rx_action+0x114/0x34c) [<c04c2d9c>] (net_rx_action) from [<c021eed8>] (__do_softirq+0x218/0x318) [<c021eed8>] (__do_softirq) from [<c021f284>] (irq_exit+0x88/0xac) [<c021f284>] (irq_exit) from [<c0240090>] (msa_irq_exit+0x11c/0x1d4) [<c0240090>] (msa_irq_exit) from [<c02677e0>] (__handle_domain_irq+0x110/0x148) [<c02677e0>] (__handle_domain_irq) from [<c0201588>] (gic_handle_irq+0xd4/0x118) [<c0201588>] (gic_handle_irq) from [<c0551700>] (__irq_svc+0x40/0x58) Exception stack(0xc0a01f30 to 0xc0a01f78) 1f20: c0ae8b40 00000000 00000000 00000000 1f40: 00000002 ffffe000 c0601f9c 00000000 ffffffff c0a2257c c0a22440 c0831a38 1f60: c0a01ec4 c0a01f80 c0203714 c0203718 600e0213 ffffffff [<c0551700>] (__irq_svc) from [<c0203718>] (arch_cpu_idle+0x20/0x3c) [<c0203718>] (arch_cpu_idle) from [<c025bfd8>] (cpu_startup_entry+0x244/0x29c) [<c025bfd8>] (cpu_startup_entry) from [<c054b0d8>] (rest_init+0xc8/0x10c) [<c054b0d8>] (rest_init) from [<c0800c58>] (start_kernel+0x468/0x514) Code: a40599e5 016086e2 018088e2 7660efe6 (503090e5) ---[ end trace 1db21d6d09c49d74 ]--- Kernel panic - not syncing: Fatal exception in interrupt CPU3: stopping CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D O 4.4.185 #1 Signed-off-by: -
David S. Miller authored
Roman Mashak says: ==================== Fix batched event generation for vlan action When adding or deleting a batch of entries, the kernel sends up to TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user space. However it does not consider that the action sizes may vary and require different skb sizes. For example, consider the following script adding 32 entries with all supported vlan parameters (in order to maximize netlink messages size): % cat tc-batch.sh TC="sudo /mnt/iproute2.git/tc/tc" $TC actions flush action vlan for i in `seq 1 $1`; do cmd="action vlan push protocol 802.1q id 4094 priority 7 pipe \ index $i cookie aabbccddeeff112233445566778800a1 " args=$args$cmd done $TC actions add $args % % ./tc-batch.sh 32 Error: Failed to fill netlink attributes while adding TC action. We have an error talking to the kernel % patch 1 adds callback in tc_action_ops of vlan action, which calculates the action size, and passes size to tcf_add_notify()/tcf_del_notify(). patch 2 updates the TDC test suite with relevant vlan test cases. ==================== Acked-by:Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Roman Mashak authored
Update TDC tests with cases varifying ability of TC to install or delete batches of vlan actions. Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
Roman Mashak authored
Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b968 ("sched: introduce vlan action") Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fixes for -net Couple of fixes for -net. More info in commit log. ==================== Signed-off-by: -
Jose Abreu authored
Do not try to return a fragment entry from TC list. Otherwise we may not clean properly allocated entries. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
When queues >= 4 we use different registers but we were not subtracting the offset of 4. Fix this. Found out by Coverity. Signed-off-by:
-
Jose Abreu authored
Fixup the XGMAC selftests by correctly finishing the implementation of set_filter callback. Result: $ ethtool -t enp4s0 The test result is PASS The test extra info: 1. MAC Loopback 0 2. PHY Loopback -95 3. MMC Counters -95 4. EEE -95 5. Hash Filter MC 0 6. Perfect Filter UC 0 7. MC Filter 0 8. UC Filter 0 9. Flow Control 0 Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-for-davem-2019-08-06' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.3 Second set of fixes for 5.3. Lots of iwlwifi fixes have accumulated which consists most of patches in this pull request. Only most notable iwlwifi fixes are listed below. mwifiex * fix a regression related to WPA1 networks since v5.3-rc1 iwlwifi * fix use-after-free issues * fix DMA mapping API usage errors * fix frame drop occurring due to reorder buffer handling in RSS in certain conditions * fix rate scale locking issues * disable TX A-MSDU on older NICs as it causes problems and was never supposed to be supported * new PCI IDs * GEO_TX_POWER_LIMIT API issue that many people were hitting ==================== Signed-off-by:
-
Denis Kirjanov authored
be_process_mcc() is invoked in 3 different places and always with BHs disabled except the be_poll function but since it's invoked from softirq with BHs disabled it won't hurt. v1->v2: added explanation to the patch v2->v3: add a missing call from be_cmds.c Signed-off-by:
Denis Kirjanov <kda@linux-powerpc.org> Signed-off-by:
-
Christophe JAILLET authored
A call to 'kfree_skb()' is missing in the error handling path of 'init_one()'. This is already present in 'remove_one()' but is missing here. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Chen-Yu Tsai authored
The sun4i-emac uses the "phy" property to find the PHY it's supposed to use. This property was deprecated in favor of "phy-handle" in commit 8c5b0944 ("dt-bindings: net: sun4i-emac: Convert the binding to a schemas"). Add support for this new property name, and fall back to the old one in case the device tree hasn't been updated. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
- 05 Aug, 2019 17 commits
-
-
David S. Miller authored
Merge tag 'linux-can-fixes-for-5.3-20190802' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-08-02 this is a pull request of 4 patches for net/master. The first two patches are by Wang Xiayang, they force that the string buffer during a dev_info() is properly NULL terminated. The last two patches are by Tomas Bortoli and fix both a potential info leak of kernel memory to USB devices. ==================== Signed-off-by:
-
Nikolay Aleksandrov authored
Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389Reported-by:michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Arnaud Patard (Rtp) authored
Orion5.x systems are still using machine files and not device-tree. Commit 96cb4342 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") has replaced devm_clk_get() with of_clk_get(), leading to a oops at boot and not working network, as reported in https://lists.debian.org/debian-arm/2019/07/msg00088.html and possibly in https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=908712. Link: https://lists.debian.org/debian-arm/2019/07/msg00088.html Fixes: 96cb4342 ("net: mvmdio: allow up to three clocks to be specified for orion-mdio") Signed-off-by:
Arnaud Patard <arnaud.patard@rtp-net.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Ursula Braun authored
FASTOPEN is not possible with SMC. sendmsg() with msg_flag MSG_FASTOPEN triggers a fallback to TCP if the socket is in state SMC_INIT. But if a nonblocking connect is already started, fallback to TCP is no longer possible, even though the socket may still be in state SMC_INIT. And if a nonblocking connect is already started, a listen() call does not make sense. Reported-by: syzbot+bd8cc73d665590a1fcad@syzkaller.appspotmail.com Fixes: 50717a37 ("net/smc: nonblocking connect rework") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
The setsockopts options TCP_NODELAY and TCP_CORK may schedule the tx worker. Make sure the socket is not yet moved into SMC_CLOSED state (for instance by a shutdown SHUT_RDWR call). Reported-by: syzbot+92209502e7aab127c75f@syzkaller.appspotmail.com Reported-by: syzbot+b972214bb803a343f4fe@syzkaller.appspotmail.com Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Signed-off-by:
-
Catherine Sullivan authored
desc_cnt and data_cnt should always be equal. In the case of a dropped packet desc_cnt was still getting updated (correctly), data_cnt was not. To eliminate this bug and prevent it from recurring this patch combines them into one ring level cnt. Signed-off-by:
Catherine Sullivan <csully@google.com> Reviewed-by:
Sagi Shahar <sagis@google.com> Signed-off-by:
-
David Ahern authored
The nexthop path in rt6_update_exception_stamp_rt needs to call rcu_read_unlock if it fails to find a fib6_nh match rather than just returning. Fixes: e659ba31 ("ipv6: Handle all fib6_nh in a nexthop in exception handling") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Make sure that shutdown never works, and at the same time document how I tested to came to the conclusion that currently reuse is not possible. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
Looks like we were slightly overzealous with the shutdown() cleanup. Even though the sock->sk_state can reach CLOSED again, socket->state will not got back to SS_UNCONNECTED once connections is ESTABLISHED. Meaning we will see EISCONN if we try to reconnect, and EINVAL if we try to listen. Only listen sockets can be shutdown() and reused, but since ESTABLISHED sockets can never be re-connected() or used for listen() we don't need to try to clean up the ULP state early. Fixes: 32857cf5 ("net/tls: fix transition through disconnect with close") Signed-off-by:
-
David S. Miller authored
Jesper Dangaard Brouer says: ==================== net: fix regressions for generic-XDP Thanks to Brandon Cazander, who wrote a very detailed bug report that even used perf probe's on xdp-newbies mailing list, we discovered that generic-XDP contains some regressions when using bpf_xdp_adjust_head(). First issue were that my selftests script, that use bpf_xdp_adjust_head(), by mistake didn't use generic-XDP any-longer. That selftest should have caught the real regression introduced in commit 458bf2f2 ("net: core: support XDP generic on stacked devices."). To verify this patchset fix the regressions, you can invoked manually via: cd tools/testing/selftests/bpf/ sudo ./test_xdp_vlan_mode_generic.sh sudo ./test_xdp_vlan_mode_native.sh ==================== Link: https://www.spinics.net/lists/xdp-newbies/msg01231.html Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.") Reported by: Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
When generic-XDP was moved to a later processing step by commit 458bf2f2 ("net: core: support XDP generic on stacked devices.") a regression was introduced when using bpf_xdp_adjust_head. The issue is that after this commit the skb->network_header is now changed prior to calling generic XDP and not after. Thus, if the header is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header also need to be updated again. Fix by calling skb_reset_network_header(). Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.") Reported-by:
Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by:
-
Jesper Dangaard Brouer authored
Given the increasing number of BPF selftests, it makes sense to reduce the time to execute these tests. The ping parameters are adjusted to reduce the time from measures 9 sec to approx 2.8 sec. Signed-off-by:
-
Jesper Dangaard Brouer authored
In-order to test both native-XDP (xdpdrv) and generic-XDP (xdpgeneric) create two wrapper test scripts, that start the test_xdp_vlan.sh script with these modes. Signed-off-by:
-
Jesper Dangaard Brouer authored
Change BPF selftest test_xdp_vlan.sh to (default) use generic XDP. This selftest was created together with a fix for generic XDP, in commit 29724956 ("net: fix generic XDP to handle if eth header was mangled"). And was suppose to catch if generic XDP was broken again. The tests are using veth and assumed that veth driver didn't support native driver XDP, thus it used the (ip link set) 'xdp' attach that fell back to generic-XDP. But veth gained native-XDP support in 948d4f21 ("veth: Add driver XDP"), which caused this test script to use native-XDP. Fixes: 948d4f21 ("veth: Add driver XDP") Fixes: 97396ff0 ("selftests/bpf: add XDP selftests for modifying and popping VLAN headers") Signed-off-by:
-
Qian Cai authored
The commit 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") introduced an undefined behaviour below due to "frag->last_in_page" is only initialized in mlx5e_init_frags_partition() when, if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE) or after bailed out the loop, for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) As the result, there could be some "frag" have uninitialized value of "last_in_page". Later, get_frag() obtains those "frag" and check "frag->last_in_page" in mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always initializing "frag->last_in_page" to "false" in mlx5e_init_frags_partition(). UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12 load of value 170 is not a valid value for type 'bool' (aka '_Bool') Call trace: dump_backtrace+0x0/0x264 show_stack+0x20/0x2c dump_stack+0xb0/0x104 __ubsan_handle_load_invalid_value+0x104/0x128 mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core] mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core] mlx5e_napi_poll+0x17c/0xa30 [mlx5_core] net_rx_action+0x248/0x940 __do_softirq+0x350/0x7b8 irq_exit+0x200/0x26c __handle_domain_irq+0xc8/0x128 gic_handle_irq+0x138/0x228 el1_irq+0xb8/0x140 arch_cpu_idle+0x1a4/0x348 do_idle+0x114/0x1b0 cpu_startup_entry+0x24/0x28 rest_init+0x1ac/0x1dc arch_call_rest_init+0x10/0x18 start_kernel+0x4d4/0x57c Fixes: 069d1146 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme") Signed-off-by:
Qian Cai <cai@lca.pw> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Dmytro Linkin authored
Currently init call of all actions (except ipt) init their 'parm' structure as a direct pointer to nla data in skb. This leads to race condition when some of the filter actions were initialized successfully (and were assigned with idr action index that was written directly into nla data), but then were deleted and retried (due to following action module missing or classifier-initiated retry), in which case action init code tries to insert action to idr with index that was assigned on previous iteration. During retry the index can be reused by another action that was inserted concurrently, which causes unintended action sharing between filters. To fix described race condition, save action idr index to temporary stack-allocated variable instead on nla data. Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Signed-off-by:
Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Hubert Feurstein authored
We have to drop the adjust_link callback in order to finally migrate to phylink. Otherwise we get the following warning during startup: "mv88e6xxx 2188000.ethernet-1:10: Using legacy PHYLIB callbacks. Please migrate to PHYLINK!" The warning is generated in the function dsa_port_link_register_of in dsa/port.c: int dsa_port_link_register_of(struct dsa_port *dp) { struct dsa_switch *ds = dp->ds; if (!ds->ops->adjust_link) return dsa_port_phylink_register(dp); dev_warn(ds->dev, "Using legacy PHYLIB callbacks. Please migrate to PHYLINK!\n"); [...] } Signed-off-by:Hubert Feurstein <h.feurstein@gmail.com> Reviewed-by:
-
