1. 18 Mar, 2004 40 commits
    • Andrew Morton's avatar
      [PATCH] pte_chain comment fix · f1802d1c
      Andrew Morton authored
      From: Carl Spalletta <ioanamitu@yahoo.com>
      
      Fix a comment bug.
      f1802d1c
    • Andrew Morton's avatar
      [PATCH] EDD: split assembly code · b6187328
      Andrew Morton authored
      From: Matt Domsch <Matt_Domsch@dell.com>
      
      Split EDD assembly code from setup.S into edd.S.  This will enable it to be
      #included into x86-64 too.
      b6187328
    • Andrew Morton's avatar
      [PATCH] EDD: move code from i386-specific locations to generic · 51900ee5
      Andrew Morton authored
      From: Matt Domsch <Matt_Domsch@dell.com>
      
      move edd.c from arch/i386/kernel to new dir drivers/firmware.  Fix up
      makefiles and Kconfigs.
      51900ee5
    • Andrew Morton's avatar
      [PATCH] EDD: move code from i386-specific locations to generic · 927f7639
      Andrew Morton authored
      From: Matt Domsch <Matt_Domsch@dell.com>
      
      Three patches to move the BIOS Enhanced Disk Drive code from i386-specific
      locations into more generic locations, which will allow it to be used on
      x86-64 as well.
      
      move edd.h from include/asm-i386 to include/linux
      927f7639
    • Andrew Morton's avatar
      [PATCH] Fix uninlined memcmp on i386 · d50e304a
      Andrew Morton authored
      From: DHollenbeck <dick@softplc.com>
      
      This patch was needed against a pristine 2.6.4 kernel when compiling with
      "gcc 3.4 _very recent_" using the -Os option.
      
      Without this patch, modules would use a non-inline memcmp() and then not
      find it in the kernel, causing depmod to complain and some modules not to
      load.
      d50e304a
    • Andrew Morton's avatar
      [PATCH] fix HZ leaking to userspace in BSD accounting · aa550c0d
      Andrew Morton authored
      From: Tim Schmielau <tim@physik3.uni-rostock.de>
      
      BSD accounting was missed in the conversion from HZ to USER_HZ.  I thought
      nobody cared, but apparently there are still users to it.
      aa550c0d
    • Andrew Morton's avatar
      [PATCH] zlib: use kernel min/max · 65a0fc80
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Michael Veeck <michael.veeck@gmx.net>
      
      Remove unnecessary min/max macros and changes calls to use kernel.h macros
      instead.
      65a0fc80
    • Andrew Morton's avatar
      [PATCH] sound: use kernel min/max · 688d6d30
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Michael Veeck <michael.veeck@gmx.net>
      
      Remove unnecessary min/max macros and changes calls to use kernel.h macros
      instead.
      688d6d30
    • Andrew Morton's avatar
      [PATCH] reiserfs: use kernel min/max · aee768e0
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Michael Veeck <michael.veeck@gmx.net>
      
      Remove unnecessary min/max macros and changes calls to use kernel.h macros
      instead.
      aee768e0
    • Andrew Morton's avatar
      [PATCH] procfs: use kernel min/max · f4358df8
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Michael Veeck <michael.veeck@gmx.net>
      
      Patch (against 2.6.3) removes unnecessary min/max macros and changes calls to
      use kernel.h macros instead.
      f4358df8
    • Andrew Morton's avatar
      [PATCH] ip2: fix double operator · ac1a964d
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      This trivial patch fixes the bug #320:
      
      http://bugme.osdl.org/show_bug.cgi?id=320
      
      The additional comment:
      
      http://bugme.osdl.org/show_bug.cgi?id=320#c1
      
      Is wrong, because it will send the command twice.
      
      We only want to see if the command got success, thus is not necessary
      to test against < 0 (if the return value is not 1, we got a error).
      
      Note that I'm using the function (bad) style.
      ac1a964d
    • Andrew Morton's avatar
      [PATCH] doc. updates/typos · 56b586b8
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      Remove the rest of references to smp.tex
      Documentation/cpufreq => Documentation/cpu-freq
      DocBook/tulip.{pdf,ps,html} => DocBook/tulip-user.{pdf,ps,html}
      Bunch of other typos.
      56b586b8
    • Andrew Morton's avatar
      [PATCH] slab: start_cpu_timer() can be __init · 85328e8b
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Luiz Fernando Capitulino <lcapitulino@prefeitura.sp.gov.br>
      85328e8b
    • Andrew Morton's avatar
      [PATCH] 8250_pnp: probe and remove can be __devinit/__devexit · 02bb9156
      Andrew Morton authored
      From: "Randy.Dunlap" <rddunlap@osdl.org>
      
      From: Luiz Fernando Capitulino <lcapitulino@prefeitura.sp.gov.br>
      02bb9156
    • Andrew Morton's avatar
      [PATCH] config: choice fix · 5a87d187
      Andrew Morton authored
      From: Roman Zippel <zippel@linux-m68k.org>
      
      When a boolean choice value has a dependency of 'm' it can be shortly
      treated as a tristate symbol.  This fixes this and also add a small
      optimization to precompute the value of the module symbol instead of
      checking it all the time.
      5a87d187
    • Andrew Morton's avatar
      [PATCH] config: persistent qconf configuration · 6fa4a50c
      Andrew Morton authored
      From: Roman Zippel <zippel@linux-m68k.org>
      
      This patch is by Andreas Fester <Andreas.Fester@gmx.de> and saves and
      restores various runtime options of qconf.
      6fa4a50c
    • Andrew Morton's avatar
      [PATCH] config: disable debug prints · a72c5f31
      Andrew Morton authored
      From: Roman Zippel <zippel@linux-m68k.org>
      
      This disables some debug prints, which are more confusing than helpful for
      normal users.
      a72c5f31
    • Andrew Morton's avatar
      [PATCH] kconfig: don't rename target dir when saving config · 86b5b992
      Andrew Morton authored
      From: Roman Zippel <zippel@linux-m68k.org>
      
      conf_write() now checks the target path whether it's a directory, so it
      saves the config in the directory instead of renaming it.
      86b5b992
    • Andrew Morton's avatar
      [PATCH] kconfig: fix xconfig on /lib64 properly · dfc78642
      Andrew Morton authored
      From: Roman Zippel <zippel@linux-m68k.org>
      
      The correct link path is needed at config time to find the correct library,
      so let's ask gcc for the real path.
      dfc78642
    • Andrew Morton's avatar
      [PATCH] don't abuse empty_zero_page (x86) · 10f0bf6b
      Andrew Morton authored
      From: Brian Gerst <bgerst@didntduck.org>
      
      Don't abuse empty_zero_page as temporary storage for boot parameters and
      command line.  This is a holdover from the days before discardable init
      sections.
      10f0bf6b
    • Andrew Morton's avatar
      [PATCH] proper alignment of init task in kernel image · 8a87e758
      Andrew Morton authored
      From: Matt Mackall <mpm@selenic.com>
      
      This keeps the alignment of the init task matched with the stack size.
      8a87e758
    • Andrew Morton's avatar
      [PATCH] sysfs: pin kobjects to fix use-after-free crashes · 2c0e195b
      Andrew Morton authored
      From: Maneesh Soni <maneesh@in.ibm.com>
      
      Fix a sysfs use-after-free crash.  The problem we have is of the kobject
      going away while we have a live dentry (the corresponding sysfs directory)
      still pointing to it throuh d_fsdata pointer.  The patch makes sure to keep
      the kobject alive by taking a reference to it during the life-time of
      corresponding dentry.
      
      
      o The following pins the kobject when sysfs assigns dentry and inode to
        the kobject. This ensures that kobject is alive during the life time of
        the dentry and inode, and people holding ref. to the dentry can access the
        kobject without any problems.
      
      o The ref. taken for the kobject is released through dentry->d_op->d_iput()
        call when the dentry ref. count drops to zero and it is being freed. For
        this sysfs_dentry_operations is introduced.
      
      For testing one has to run the following test on a SMP box:
      
      1) Do insmod/rmmod "dummy.o" network driver in a forever loop.
      
      2) Parallely do "find /sys/class/net | xargs cat" also in a forever loop.
      2c0e195b
    • Andrew Morton's avatar
      [PATCH] Fix dentry refcounting in sysfs_remove_group() · b67cee68
      Andrew Morton authored
      From: Maneesh Soni <maneesh@in.ibm.com>
      
      The following patch fixes the dentry refcounting, during
      sysfs_remove_group() and also adds the missing dput() for the "extra" ref
      taken during sysfs_create() for the sub-directory dentry corresponding to
      attribute group.
      b67cee68
    • Andrew Morton's avatar
      [PATCH] sysfs_remove_dir-vs-dcache_readdir race fix · f8f71d1b
      Andrew Morton authored
      From: Maneesh Soni <maneesh@in.ibm.com>
      
      I have re-done the patch fixing the race between sysfs_remove_dir() and
      dcache_readdir().  If you recall, sysfs_remove_dir(kobj) manipulates the
      ->d_subdirs list for the dentry corresponding to the sysfs directory being
      removed.  It can end up deleting the cursor dentry which is added to the
      ->d_subdirs list during a concurrent dcache_dir_open() ==> dcache_readdir()
      for the same directory.  And as a result dcache_readdir() can loop for ever
      holding dcache_lock.
      
      The earlier patch which was included in -mm1 created problems which
      resulted in list_del() BUG hits in prune_dcache().  The reason I think is
      that in the main loop in sysfs_remove_dir(), dcache_lock is dropped and
      re-acquired, and this could result in inconsistent ->d_subdirs list and
      prune_dcache() may try to delete an already deleted dentry.  I have
      corrected this in the new patch as below.
      
      I could do sysfs_remove_dir() more neatly on sysfs backing store patch set
      as there I don't use the ->d_subdirs list.  Instead the list of children
      sysfs_dirent works out well.  But untill sysfs backing store patch is
      picked up the existing code suffer from this race.  This can be easily
      tested by running following two loops on a SMP box
      
      # while true; do insmod drivers/net/dummy.ko; rmmod dummy; done
      # while true; do find /sys/class/net > /dev/null; done
      
      
      o This patch fixes sysfs_remove_dir race with dcache_readdir.  There is
        no need for sysfs_remove_dir to modify the d_subdirs list for the
        directory being deleted as it is taken care in the final dput.  Modifying
        this list results in inconsistent d_subdirs list and causes infinite loop
        in concurrently occurring dcache_readdir.
      
      o The main loop is restarted every time, dcache_lock is re-acquired in
        order to maintain consistency.
      f8f71d1b
    • Andrew Morton's avatar
      [PATCH] Add dma_error() and pci_dma_error() · 78576382
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Introduce dma_error() and pci_dma_error() which are used to detect failures
      in pci_map_single.
      78576382
    • Andrew Morton's avatar
      [PATCH] ppc64: Fix POWER3 TCE allocation · 1c4c0ff6
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      - Fix for machines with 3GB IO holes (eg nighthawk).
      - Increase the maximum number of PHBs and warn if we exceed this (we used
        to walk off the end of the array)
      - Only allocate an 8MB TCE table on POWER4
      1c4c0ff6
    • Andrew Morton's avatar
      [PATCH] ppc64: Fix SLB reload bug · f75bd853
      Andrew Morton authored
      From: Paul Mackerras <paulus@samba.org>
      
      Recently we found a particularly nasty bug in the segment handling in the
      ppc64 kernel.  It would only happen rarely under heavy load, but when it
      did the machine would lock up with the whole of memory filled with
      exception stack frames.
      
      The primary cause was that we were losing the translation for the kernel
      stack from the SLB, but we still had it in the ERAT for a while longer.
      Now, there is a critical region in various exception exit paths where we
      have loaded the SRR0 and SRR1 registers from GPRs and we are loading those
      GPRs and the stack pointer from the exception frame on the kernel stack.
      If we lose the ERAT entry for the kernel stack in that region, we take an
      SLB miss on the next access to the kernel stack.  Taking the exception
      overwrites the values we have put into SRR0 and SRR1, which means we lose
      state.  In fact we ended up repeating that last section of the exception
      exit path, but using the user stack pointer this time.  That caused another
      exception (or if it didn't, we loaded a new value from the user stack and
      then went around and tried to use that).  And it spiralled downwards from
      there.
      
      The patch below fixes the primary problem by making sure that we really
      never cast out the SLB entry for the kernel stack.  It also improves
      debuggability in case anything like this happens again by:
      
      - In our exception exit paths, we now check whether the RI bit in the
        SRR1 value is 0.  We already set the RI bit to 0 before starting the
        critical region, but we never checked it.  Now, if we do ever get an
        exception in one of the critical regions, we will detect it before
        returning to the critical region, and instead we will print a nasty
        message and oops.
      
      - In the exception entry code, we now check that the kernel stack pointer
        value we're about to use isn't a userspace address.  If it is, we print a
        nasty message and oops.
      
      This has been tested on G5 and pSeries (both with and without hypervisor)
      and compile-tested on iSeries.
      f75bd853
    • Andrew Morton's avatar
      [PATCH] ppc64: Add numa=off command line option · 973a4e70
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Add numa=off command line option to disable NUMA support at runtime.
      Useful if there are issues with our parsing of the NUMA toplogy or for
      testing NUMA gains.
      973a4e70
    • Andrew Morton's avatar
      [PATCH] ppc64: remove IO_DEBUG · a800d7b1
      Andrew Morton authored
      From: Anton Blanchard <anton@samba.org>
      
      Remove the old __IO_DEBUG stuff and add some nice comments courtesy of x86.
      a800d7b1
    • Andrew Morton's avatar
      [PATCH] ppc64: iSeries virtual tape driver · 590b0a82
      Andrew Morton authored
      From: Stephen Rothwell <sfr@canb.auug.org.au>
      
      This patch adds the driver for the PPC64 iSeries virtual tape.
      590b0a82
    • Alexander Viro's avatar
      [PATCH] add touch_atime() helper · df8781b5
      Alexander Viro authored
      Preparation for per-mountpoint noatime, nodiratime and later -
      per-mountpoint r/o.  Depends on file_accessed() patch, should go after
      it.
      
      New helper - touch_atime(mnt, dentry).  It's a wrapper for
      update_atime() and that's where all future per-mountpoint checks will
      go.
      df8781b5
    • Alexander Viro's avatar
      [PATCH] add file_accessed() helper · 5f9861a6
      Alexander Viro authored
      New inlined helper - file_accessed(file) (wrapper for update_atime())
      5f9861a6
    • Alexander Viro's avatar
      [PATCH] missing check in do_add_mount() · d2a4a177
      Alexander Viro authored
      Make sure that we don't end up with symlink mounted over something
      
      (mount --bind is safe since we use LOOKUP_FOLLOW in pathname resolution
      there).
      d2a4a177
    • David S. Miller's avatar
      Merge nuts.davemloft.net:/disk1/BK/sparcwork-2.6 · 4143a413
      David S. Miller authored
      into nuts.davemloft.net:/disk1/BK/sparc-2.6
      4143a413
    • William Lee Irwin III's avatar
      bce3bd85
    • Jason Wever's avatar
    • David Howells's avatar
      [PATCH] FD_CLOEXEC fcntl cleanup · dc5178fa
      David Howells authored
      This fixes a minor problem with fcntl.
      
      get_close_on_exec() uses FD_ISSET() to determine the fd state, but this
      is not guaranteed to be either 0 of FD_CLOEXEC.  Make that explicit.
      
      Also, the argument of set_close_on_exec() is being AND'ed with the
      literal constant 1.  Make it use an explicit FD_CLOEXEC test.
      dc5178fa
    • Linus Torvalds's avatar
      Make ppc64 __FD_ISSET() return a proper boolean return value. · 437117bf
      Linus Torvalds authored
      (The broken macro only triggers for non-gcc compiles, but
      still..)
      437117bf
    • Bartlomiej Zolnierkiewicz's avatar
      [PATCH] add missing MODULE_DEVICE_TABLE() to IDE PCI drivers · 2b34fa5f
      Bartlomiej Zolnierkiewicz authored
      Original patch from Hannes Reinecke <hare@suse.de>.
      
      This is required to have modular IDE drivers announce themselves
      properly in modules.pcimap.
      2b34fa5f
    • Linus Torvalds's avatar
      1ddcf61a