This is already included at genericirq.rst. Adding it twice
causes C namespace duplication:

	.../Documentation/core-api/kernel-api:237: ../kernel/irq/manage.c:100: WARNING: Duplicate C declaration, also defined in 'genericirq'.
	Declaration is 'synchronize_hardirq'.
	.../Documentation/core-api/kernel-api:237: ../kernel/irq/manage.c:128: WARNING: Duplicate C declaration, also defined in 'genericirq'.
	Declaration is 'synchronize_irq'.
	.../Documentation/core-api/kernel-api:237: ../kernel/irq/manage.c:443: WARNING: Duplicate C declaration, also defined in 'genericirq'.
	Declaration is 'irq_set_affinity_notifier'.
	...
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently, kernel/irq/chip.c is included twice, one for
export functions, and then for internal ones. However, as
the :export:  and :internal: tags are missing, they ended
being included twice.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some warnings produced with Sphinx 3.x:

	Documentation/networking/ieee802154.rst:29: WARNING: Error in declarator or parameters
	Invalid C declaration: Expecting "(" in parameters. [error at 7]
	  int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
	  -------^
	Documentation/networking/ieee802154.rst:134: WARNING: Invalid C declaration: Expected end of definition. [error at 81]
	  void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb, u8 lqi):
	  ---------------------------------------------------------------------------------^
	Documentation/networking/ieee802154.rst:139: WARNING: Invalid C declaration: Expected end of definition. [error at 95]
	  void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb, bool ifs_handling):
	  -----------------------------------------------------------------------------------------------^
	Documentation/networking/ieee802154.rst:158: WARNING: Invalid C declaration: Expected end of definition. [error at 35]
	  int start(struct ieee802154_hw *hw):
	  -----------------------------------^
	Documentation/networking/ieee802154.rst:162: WARNING: Invalid C declaration: Expected end of definition. [error at 35]
	  void stop(struct ieee802154_hw *hw):
	  -----------------------------------^
	Documentation/networking/ieee802154.rst:166: WARNING: Invalid C declaration: Expected end of definition. [error at 61]
	  int xmit_async(struct ieee802154_hw *hw, struct sk_buff *skb):
	  -------------------------------------------------------------^
	Documentation/networking/ieee802154.rst:171: WARNING: Invalid C declaration: Expected end of definition. [error at 43]
	  int ed(struct ieee802154_hw *hw, u8 *level):
	  -------------------------------------------^
	Documentation/networking/ieee802154.rst:176: WARNING: Invalid C declaration: Expected end of definition. [error at 62]
	  int set_channel(struct ieee802154_hw *hw, u8 page, u8 channel):
	  --------------------------------------------------------------^

Caused by some bad c:function: prototypes. Fix them.
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The C domain functions there collide with the English ones,
due to namespace collision, generating lots of warnings with
Sphinx 3.x:

	./include/linux/mutex.h:121: WARNING: Duplicate C declaration, also defined in 'translations/it_IT/kernel-hacking/locking'.
	Declaration is 'mutex_init'.
	./include/linux/mutex.h:152: WARNING: Duplicate C declaration, also defined in 'translations/it_IT/kernel-hacking/locking'.
	Declaration is 'mutex_is_locked'.
	./include/linux/mutex.h:226: WARNING: Duplicate C declaration, also defined in 'translations/it_IT/kernel-hacking/locking'.
	Declaration is 'mutex_trylock_recursive'.
	./kernel/locking/mutex.c:281: WARNING: Duplicate C declaration, also defined in 'translations/it_IT/kernel-hacking/locking'.
	Declaration is 'mutex_lock'.
	...

Add a namespace tag there, in order to prevent that.
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some c-domain tags that are wrong. While this won't
cause problems with Sphinx < 3.0, this cause troubles with
newer versions, as the C parser won't recognize the contents
of the tag, and will drop it from the output.

Let's just place them at literal blocks.
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The :c:type:`foo` only works properly with structs before
Sphinx 3.x.

On Sphinx 3.x, structs should now be declared using the
.. c:struct, and referenced via :c:struct tag.

As we now have the automarkup.py macro, that automatically
convert:
	struct foo

into cross-references, let's get rid of that, solving
several warnings when building docs with Sphinx 3.x.

Reviewed-by: André Almeida <andrealmeid@collabora.com> # blk-mq.rst
Reviewed-by: Takashi Iwai <tiwai@suse.de> # sound
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are three files with replace macros for structs,
mapping them into Sphinx 2.x C domain references.

Well, this is broken on Sphinx 3.x. Also, for Sphinx 2.x,
the automarkup macro should be able to take care of them.

So, let's just drop those.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The new C domain code on Sphinx 3 doesn't allow anymore
to use c:type:: for structs.

Now that cdomain.py has backward support, let's use
c:struct:: instead.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3.x broke support for the cdomain.py extension, as the
c domain code was rewritten. Due to that, the c tags need to
be re-written, in order to use the new c domain notation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Sphinx 3 added support for declaring C macros with parameters using the
:c:macro role.

To support automarkup for both functions and parametrized macros using
the same regex (words ending in ()), try to cross-reference to both, and
only fall back to regular text if neither exist.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

With the transition to Sphinx 3, new warnings were caused by
automarkup, exposing bugs in the name matching.

When automarkup parsed a text like "struct struct" in the documentation,
it tried to cross-reference to a "struct" symbol, which is recognized as
a C reserved word by Sphinx 3, generating a warning.

Add some C reserved words (only the ones that were causing warnings) to
a list and skip them while trying to cross-reference.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

With the transition to Sphinx 3, new warnings were generated by
automarkup, exposing bugs in the regexes.

The warnings were caused by the expressions matching words in the
translated versions of the documentation, since any unicode character
was matched.

Fix the regular expression by making the C regexes use ASCII and
ensuring the expressions only match the beginning of words,
in order to avoid warnings like this:

	WARNING: Unparseable C cross-reference: '调用debugfs_rename'

That's probably due to the lack of using spaces between words
on Chinese.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While Sphinx 2 used a single c:type role for struct, union, enum and
typedef, Sphinx 3 uses a specific role for each one.
To keep backward compatibility, detect the Sphinx version and use the
correct roles for that version.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@protonmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Currently, there's no way to exclude identifiers from
a kernel-doc markup. Add support for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Finding where an error like this was generated:
	../lib/math/div64.c:73: WARNING: Duplicate C declaration, also defined in 'kernel-api'.

Can take some time, as there's no glue about what kernel-doc
tag generated it. It is a way better to display it as:

	.../Documentation/core-api/kernel-api:171: ../lib/math/div64.c:73: WARNING: Duplicate C declaration, also defined in 'kernel-api'.
	Declaration is 'div_s64_rem'.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While most of the C domain parsing is done via kernel-doc,
some RST files use C domain tags directly.

While several of them can be removed for Sphinx < 3.0, due
to automarkup.py, and several others that could be
converted into kernel-doc markups, changes like that are
time-consuming, and may not fit all cases.

As we already have the cdomain.py for handing backward
compatibility with Sphinx versions below 3.0, let's
make it more complete, in order to cover any usage of the
newer tags outside kernel-doc.

This way, it should be feasible to use the new tags inside
the Kernel tree, without losing backward compatibility.

This should allow fixing the remaining warnings with
the Kernel tags.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Since Sphinx 3.0, the C domain code was rewritten, but only
after version 3.1 it got support for setting namespaces on
C domains, with is something that it is required, in order to
document system calls, like ioctl() and others.

As part of changing the documentation subsystem to properly
build with Sphinx 3.1+, add support for such new tag:

	.. c:namespace::"

Such tag optionally replaces the optional "name" tag for functions,
setting a single namespace domain for all C references found
at the file.

With that, it should be possible to convert existing
documentation to be compatible with both Sphinx 1.x/2.x and
3.1+.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are a few namespace clashes by using c:macro everywhere:

basically, when using it, we can't have something like:

	.. c:struct:: pwm_capture

	.. c:macro:: pwm_capture

So, we need to use, instead:

	.. c:function:: int pwm_capture (struct pwm_device * pwm, struct pwm_capture * result, unsigned long timeout)

for the function declaration.

The kernel-doc change was proposed by Jakob Lykke Andersen here:

	https://github.com/jakobandersen/linux_docs/commit/6fd2076ec001cca7466857493cd678df4dfe4a65

Although I did a different implementation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Address several issues related to pointing to the wrong line
number:

1) ensure that line numbers will always be initialized

   When section is the default (Description), the line number
   is not initializing, producing this:

	$ ./scripts/kernel-doc --enable-lineno ./drivers/media/v4l2-core/v4l2-mem2mem.c|less

	**Description**

	#define LINENO 0
	In case of streamoff or release called on any context,
	1] If the context is currently running, then abort job will be called
	2] If the context is queued, then the context will be removed from
	   the job_queue

  Which is not right. Ensure that the line number will always
  be there. After applied, the result now points to the right location:

	**Description**

	#define LINENO 410
	In case of streamoff or release called on any context,
	1] If the context is currently running, then abort job will be called
	2] If the context is queued, then the context will be removed from
	   the job_queue

2) The line numbers for function prototypes are always + 1,
   because it is taken at the line after handling the prototype.
   Change the logic to point to the next line after the /** */
   block;

3) The "DOC:" line number should point to the same line as this
   markup is found, and not to the next one.

Probably part of the issues were due to a but that was causing
the line number offset to be incremented by one, if --export
were used.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When kernel-doc is called via kerneldoc.py, there's no need to
auto-detect the Sphinx version, as the Sphinx module already
knows it. So, add an optional parameter to allow changing the
Sphinx dialect.

As kernel-doc can also be manually called, keep the auto-detection
logic if the parameter was not specified. On such case, emit
a warning if sphinx-build can't be found at PATH.

I ended using a suggestion from Joe for using a more readable
regex, instead of using a complex one with a hidden group like:

	m/^(\d+)\.(\d+)(?:\.?(\d+)?)/

in order to get the optional <patch> argument.

Thanks-to: Joe Perches <joe@perches.com>
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

While kernel-doc needs to parse parameters in order to
identify its name, it shouldn't be touching the type,
as parsing it is very difficult, and errors happen.

One current error is when parsing this parameter:

	const u32 (*tab)[256]

Found at ./lib/crc32.c, on this function:

	u32 __pure crc32_be_generic (u32 crc, unsigned char const *p, size_t len, const u32 (*tab)[256], u32 polynomial);

The current logic mangles it, producing this output:

	const u32 ( *tab

That's something that it is not recognizeable.

So, instead, let's push the argument as-is, and use it
when printing the function prototype and when describing
each argument.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Some typedef expressions are output as normal functions.

As we need to be clearer about the type with Sphinx 3.x,
detect such cases.

While here, fix a wrongly-indented block.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, the build system doesn't use -nofunction, as
it is pretty much useless, because it doesn't consider
the other output modes (extern, internal), working only
with all.

Also, it is limited to exclude functions.

Re-implement it in order to allow excluding any symbols from
the document output, no matter what mode is used.

The parameter was also renamed to "-nosymbol", as it express
better its meaning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's currently a bug with the way kernel-doc script
counts line numbers that can be seen with:

	$ ./scripts/kernel-doc -rst  -enable-lineno include/linux/math64.h >all && ./scripts/kernel-doc -rst -internal -enable-lineno include/linux/math64.h >int && diff -U0 int all

	--- int	2020-09-28 12:58:08.927486808 +0200
	+++ all	2020-09-28 12:58:08.905486845 +0200
	@@ -1 +1 @@
	-#define LINENO 27
	+#define LINENO 26
	@@ -3 +3 @@
	-#define LINENO 16
	+#define LINENO 15
	@@ -9 +9 @@
	-#define LINENO 17
	+#define LINENO 16
	...

This is happening with perl version 5.30.3, but I'm not
so sure if this is a perl bug, or if this is due to something
else.

In any case, fixing it is easy. Basically, when "-internal"
parameter is used, the process_export_file() function opens the
handle "IN". This makes the line number to be incremented, as the
handler for the main open is also "IN".

Fix the problem by using a different handler for the
main open().

While here, add a missing close for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Unfortunately, Sphinx 3.x parser for c functions is too pedantic:

	https://github.com/sphinx-doc/sphinx/issues/8241

While it could be relaxed with some configurations, there are
several corner cases that it would make it hard to maintain,
and will require teaching conf.py about several macros.

So, let's instead use the :c:macro notation. This will
produce an output that it is not as nice as currently, but it
should still be acceptable, and will provide cross-references,
removing thousands of warnings when building with newer
versions of Sphinx.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

With Sphinx 3.x, the ".. c:type:" tag was changed to accept either:

	.. c:type:: typedef-like declaration
	.. c:type:: name

Using it for other types (including functions) don't work anymore.

So, there are newer tags for macro, enum, struct, union, and others,
which doesn't exist on older versions.

Add a check for the Sphinx version and change the produced tags
accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The PHY kernel-doc markup has gained support for documenting
a typedef enum.

However, right now the parser was not prepared for it.

So, add support for parsing it.

Fixes: 4069a572 ("net: phy: Document core PHY structures")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Pull SPDX updates from Greg KH:
 "Here are some SPDX-specific changes for 5.10-rc1.

  They include:

   - driver fixes to make spdxcheck.pl work properly

   - add GFDL licenses as "deprecated" but required due to some of our
     documentation using them

   - add Zlib license as "deprecated" but required because we have code
     with this license in the tree.

   - convert some drivers to have SPDX identifiers that previously
     didn't have them.

  All have been in linux-next for a very long time with no reported
  issues"

* tag 'spdx-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  scripts/spdxcheck.py: handle license identifiers in XML comments
  net/mlx5: IPsec: make spdxcheck.py happy
  LICENSES/deprecated: add Zlib license text
  LICENSE: add GFDL deprecated licenses
  net/qla3xxx: Convert to SPDX license identifiers
  net/qlge: Convert to SPDX license identifiers
  net/qlcnic: Convert to SPDX license identifiers
  scsi/qla2xxx: Convert to SPDX license identifiers
  scsi/qla4xxx: Convert to SPDX license identifiers

Merge tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the "big" set of driver core patches for 5.10-rc1

  They include a lot of different things, all related to the driver core
  and/or some driver logic:

   - sysfs common write functions to make it easier to audit sysfs
     attributes

   - device connection cleanups and fixes

   - devm helpers for a few functions

   - NOIO allocations for when devices are being removed

   - minor cleanups and fixes

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
  regmap: debugfs: use semicolons rather than commas to separate statements
  platform/x86: intel_pmc_core: do not create a static struct device
  drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
  drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
  mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
  drivers core: Miscellaneous changes for sysfs_emit
  drivers core: Reindent a couple uses around sysfs_emit
  drivers core: Remove strcat uses around sysfs_emit and neaten
  drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
  sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
  dyndbg: use keyword, arg varnames for query term pairs
  driver core: force NOIO allocations during unplug
  platform_device: switch to simpler IDA interface
  driver core: platform: Document return type of more functions
  Revert "driver core: Annotate dev_err_probe() with __must_check"
  Revert "test_firmware: Test platform fw loading on non-EFI systems"
  iio: adc: xilinx-xadc: use devm_krealloc()
  hwmon: pmbus: use more devres helpers
  devres: provide devm_krealloc()
  syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
  ...

Pull tty/serial updates from Greg KH:
 "Here is the big set of tty and serial driver patches for 5.10-rc1.

  Lots of little things in here, including:

   - tasklet_setup api conversions

   - sysrq support for capital letters

   - vt and vc cleanups and unwinding the mess some more

   - serial driver updates and minor tweaks

   - new device ids

   - rs485 support for some drivers

   - serial binding documentation updates

   - lots of small serial driver changes for reported issues

  All have been in linux-next for a while with no reported issues"

* tag 'tty-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  serial: mcf: add sysrq capability
  serial: fsl_lpuart: add sysrq support when using dma
  fbcon: remove no-op fbcon_set_origin()
  tty/sysrq: Extend the sysrq_key_table to cover capital letters
  serial: max310x: rework RX interrupt handling
  serial: 8250_dw: Fix clk-notifier/port suspend deadlock
  serial: 8250: Skip uninitialized TTY port baud rate update
  serial: 8250: Discard RTS/DTS setting from clock update method
  tty: serial: imx: disable TXDC IRQ in imx_uart_shutdown() to avoid IRQ storm
  serial: 8250_fsl: Fix TX interrupt handling condition
  serial: pl011: Fix lockdep splat when handling magic-sysrq interrupt
  tty: serial: fsl_lpuart: fix lpuart32_poll_get_char
  tty: serial: lpuart: fix lpuart32_write usage
  serial: qcom_geni_serial: To correct QUP Version detection logic
  serial: mvebu-uart: fix unused variable warning
  vt_ioctl: make VT_RESIZEX behave like VT_RESIZE
  serial: mvebu-uart: simplify the return expression of mvebu_uart_probe()
  tty: serial: imx: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  tty: hvc: fix link error with CONFIG_SERIAL_CORE_CONSOLE=n
  pch_uart: drop double zeroing
  ...

A recent change to the checksum code removed usage of some extra
arguments, alongside with storage on the stack for those, and the stack
pointer no longer needed to be adjusted in the function prologue.

But a left over subtraction wasn't removed in the function epilogue,
causing the function to return with the stack pointer moved 16 bytes
away from where it should have.  This corrupted local state and lead to
weird crashes.

This simply removes the leftover instruction from the epilogue.

Fixes: 70d65cd5 ("ppc: propagate the calling conventions change down to csum_partial_copy_generic()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull backlight updates from Lee Jones:
 "New Drivers:
   - Add support for KTD253

  Fix-ups:
   - Add Device Tree documentation; common, kinetic,ktd253
   - Use correct header(s); tosa_lcd, tosa_bl

  Bug Fixes:
   - Fix refcount imbalance; sky81452-backlight"

* tag 'backlight-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: tosa_bl: Include the right header
  backlight: tosa_lcd: Include the right header
  backlight: Add Kinetic KTD253 backlight driver
  dt-bindings: backlight: Add Kinetic KTD253 bindings
  dt-bindings: backlight: Add some common backlight properties
  backlight: sky81452-backlight: Fix refcount imbalance on error

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for initialising shared (between children) Regmaps
   - Add support for Kontron SL28CPLD
   - Add support for ENE KB3930 Embedded Controller
   - Add support for Intel FPGA PAC MAX 10 BMC

  New Device Support:
   - Add support for Power to Ricoh RN5T618
   - Add support for UART to Intel Lakefield
   - Add support for LP87524_Q1 to Texas Instruments LP87565

  New Functionality:
   - Device Tree; ene-kb3930, sl28cpld, syscon, lp87565, lp87524-q1
   - Use new helper dev_err_probe(); madera-core, stmfx, wcd934x
   - Use new GPIOD API; dm355evm_msp
   - Add wake-up capability; sprd-sc27xx-spi
   - Add ACPI support; kempld-core

  Fix-ups:
   - Trivial (spelling/whitespace); Kconfig, ab8500
   - Fix for unused variables; khadas-mcu, kempld-core
   - Remove unused header file(s); mt6360-core
   - Use correct IRQ flags in docs; act8945a, gateworks-gsc, rohm,bd70528-pmic
   - Add COMPILE_TEST support; asic3, tmio_core
   - Add dependency on I2C; SL28CPLD

  Bug Fixes:
   - Fix memory leak(s); sm501
   - Do not free regmap_config's 'name' until exit; syscon"

* tag 'mfd-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (34 commits)
  mfd: kempld-core: Fix unused variable 'kempld_acpi_table' when !ACPI
  mfd: sl28cpld: Depend on I2C
  mfd: asic3: Build if COMPILE_TEST=y
  dt-bindings: mfd: Correct interrupt flags in examples
  mfd: Add ACPI support to Kontron PLD driver
  mfd: intel-m10-bmc: Add Intel MAX 10 BMC chip support for Intel FPGA PAC
  mfd: lp87565: Add LP87524-Q1 variant
  dt-bindings: mfd: Add LP87524-Q1
  dt-bindings: mfd: lp87565: Convert to yaml
  mfd: mt6360: Remove unused include <linux/version.h>
  mfd: sm501: Fix leaks in probe()
  mfd: syscon: Don't free allocated name for regmap_config
  dt-bindings: mfd: syscon: Document Exynos3 and Exynos5433 compatibles
  dt-bindings: mfd: syscon: Merge Samsung Exynos Sysreg bindings
  dt-bindings: mfd: ab8500: Remove weird Unicode characters
  mfd: sprd: Add wakeup capability for PMIC IRQ
  mfd: intel-lpss: Add device IDs for UART ports for Lakefield
  mfd: dm355evm_msp: Convert LEDs to GPIO descriptor table
  mfd: wcd934x: Simplify with dev_err_probe()
  mfd: stmfx: Simplify with dev_err_probe()
  ...

Pull devicetree updates from Rob Herring:

 - Update dtc to upstream version v1.6.0-31-gcbca977ea121

 - dtx_diff help text reformatting

 - Speed-up validation time for binding and dtb checks using json for
   intermediate files

 - Add support for running yamllint on DT schema files

 - Remove old booting-without-of.rst

 - Extend the example schema to address common issues

 - Cleanup handling of additionalProperties/unevaluatedProperties

 - Ensure all DSI controller schemas reference dsi-controller.yaml

 - Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
   DFI, and Cisco Meraki

 - Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
   SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
   schema

 - Convert HiSilicon SoC and syscon bindings to DT schema

 - Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema

 - Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
   GPIO, and UART to DT schema

 - Add i.MX 8M compatible strings

 - Add LM81 and DS1780 as trivial devices

 - Various missing properties added to fix dtb validation warnings

* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
  dt-bindings: misc: explicitly add #address-cells for slave mode
  spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
  dt: Remove booting-without-of.rst
  dt-bindings: update usb-c-connector example
  dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
  dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
  dt-bindings: pwm: imx: document i.MX compatibles
  scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
  dt-bindings: Add running yamllint to dt_binding_check
  dt-bindings: powerpc: Add a schema for the 'sleep' property
  dt-bindings: pinctrl: sirf: Fix typo abitrary
  dt-bindings: pinctrl: qcom: Fix typo abitrary
  dt-bindings: Explicitly allow additional properties in common schemas
  dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
  dt-bindings: Add missing 'unevaluatedProperties'
  Docs: Fixing spelling errors in Documentation/devicetree/bindings/
  dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
  dt-bindings: riscv: convert pwm bindings to json-schema
  dt-bindings: riscv: convert plic bindings to json-schema
  dt-bindings: fu540: prci: convert PRCI bindings to json-schema
  ...

Pull pin control updates from Linus Walleij:
 "Core changes:

   - NONE whatsoever, we don't even touch the core files this time
     around.

  New drivers:

   - New driver for the Toshiba Visconti SoC.

   - New subdriver for the Qualcomm MSM8226 SoC.

   - New subdriver for the Actions Semiconductor S500 SoC.

   - New subdriver for the Mediatek MT8192 SoC.

   - New subdriver for the Microchip SAMA7G5 SoC.

  Driver enhancements:

   - Intel Cherryview and Baytrail cleanups and refactorings.

   - Enhanced support for the Renesas R8A7790, more pins and groups.

   - Some optimizations for the MCP23S08 MCP23x17 variant.

   - Some cleanups around the Actions Semiconductor subdrivers.

   - A bunch of cleanups around the SH-PFC and Emma Mobile drivers.

   - The "SH-PFC" (literally SuperH pin function controller, I think)
     subdirectory is now renamed to the more neutral "renesas", as these
     are not very much centered around SuperH anymore.

   - Non-critical fixes for the Aspeed driver.

   - Non-critical fixes for the Ingenic (MIPS!) driver.

   - Fix a bunch of missing pins on the AMD pinctrl driver"

* tag 'pinctrl-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (78 commits)
  pinctrl: amd: Add missing pins to the pin group list
  dt-bindings: pinctrl: sunxi: Allow pinctrl with more interrupt banks
  pinctrl: visconti: PINCTRL_TMPV7700 should depend on ARCH_VISCONTI
  pinctrl: mediatek: Free eint data on failure
  pinctrl: single: fix debug output when #pinctrl-cells = 2
  pinctrl: single: fix pinctrl_spec.args_count bounds check
  pinctrl: sunrisepoint: Modify COMMUNITY macros to be consistent
  pinctrl: cannonlake: Modify COMMUNITY macros to be consistent
  pinctrl: tigerlake: Fix register offsets for TGL-H variant
  pinctrl: Document pinctrl-single,pins when #pinctrl-cells = 2
  pinctrl: mediatek: use devm_platform_ioremap_resource_byname()
  pinctrl: nuvoton: npcm7xx: Constify static ops structs
  pinctrl: mediatek: mt7622: add antsel pins/groups
  pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()
  pinctrl: at91-pio4: add support for sama7g5 SoC
  dt-bindings: pinctrl: at91-pio4: add microchip,sama7g5
  pinctrl: spear: simplify the return expression of tvc_connect()
  pinctrl: spear: simplify the return expression of spear310_pinctrl_probe
  pinctrl: sprd: use module_platform_driver to simplify the code
  pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.
  ...

Pull LED updates from Pavel Machek:
 "Quite a lot of stuff is going on here. Great cleanups/fixes from Marek
  and others are biggest part.

  I limited CPU LED trigger to 8 LEDs, because it was willing to
  register 1024 'triggers' on machine with 1024 CPUs. I don't believe it
  will cause any problems, but we can raise the limit if it does"

* tag 'leds-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (84 commits)
  leds: pwm: Remove platform_data support
  leds: lm3697: Fix out-of-bound access
  leds: ns2: do not guard OF match pointer with of_match_ptr
  leds: ns2: convert to fwnode API
  leds: tlc591xx: fix leak of device node iterator
  leds: pca963x: use struct led_init_data when registering
  leds: pca963x: register LEDs immediately after parsing, get rid of platdata
  leds: tca6507: remove binding comment
  leds: tca6507: cosmetic change: use helper variable
  leds: tca6507: do not set GPIO names
  dt-bindings: leds: tca6507: convert to YAML
  ledtrig-cpu: Limit to 8 CPUs
  leds: TODO: Add documentation about possible subsystem improvements
  leds: pca9532: read pwm settings from device tree
  leds: pca9532: correct shift computation in pca9532_getled
  leds: lm36274: Fix warning for undefined parameters
  leds: lm3532: Fix warnings for undefined parameters
  leds: pca963x: use flexible array
  leds: pca963x: cosmetic: rename variables
  leds: pca963x: cosmetic: rename variables
  ...