- 19 Jan, 2006 40 commits
-
-
YAMAMOTO Takashi authored
Change nfsd_sync_dir to return an error if ->sync fails, and pass that error up through the stack. This involves a number of rearrangements of error paths, and care to distinguish between Linux -errno numbers and NFSERR numbers. In the 'create' routines, we continue with the 'setattr' even if a previous sync_dir failed. This patch is quite different from Takashi's in a few ways, but there is still a strong lineage. Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Roman Zippel authored
Set the correct type and creator for symlinks. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
HFS+ also requires the correct creation date so recent version of OS X recognize it as link. Improve link handling: - if something is wrong with the link, ignore the link attribute and treat it as regular file (this also fixes a missing unlock during lookup). - check for incorrect link counts during unlink. Signed-off-by:
-
Roman Zippel authored
Read the correct ctime from disk (it was written but never read for some reason). Read also creation date, which is used in the next patch. (Problem found by Olivier Castan <olivier.castan@certa.ssi.gouv.fr>) Signed-off-by:
-
David Elliott authored
Add support for HFSX, which allows for case-sensitive filenames. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. Signed-off-by:
-
Roman Zippel authored
Add the log level and a "hfs: " prefix to all kernel prints. (HFS and HFS+ will use the same prefix, as they share some code and could be merged at some point.) Signed-off-by:
-
Arnd Bergmann authored
All standard system calls should be declared in include/linux/syscalls.h. Add some of the new additions that were previously missed. Signed-off-by:
Arnd Bergmann <arndb@de.ibm.com> Signed-off-by:
-
Jason Baron authored
Currently, a negative policy argument passed into the 'sys_sched_setscheduler()' system call, will return with success. However, the manpage for 'sys_sched_setscheduler' says: EINVAL The scheduling policy is not one of the recognized policies, or the parameter p does not make sense for the policy. Signed-off-by:Jason Baron <jbaron@redhat.com> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Eric Van Hensbergen authored
v9fs mmap support was originally removed from v9fs at Al Viro's request, but recently there have been requests from folks who want readpage functionality (primarily to enable execution of files mounted via 9P). This patch adds readpage support (but not writepage which contained most of the objectionable code). It passes fsx-linux (and other regressions) so it should be relatively safe. Signed-off-by:
Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Correct a bit of whitespace problems while working here. Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
When the user specifies both a COW file and its backing file, if the previous backing file is not found, currently UML tries again to use it and fails. This can be corrected by changing same_backing_files() return value in that case, so that the caller will try to change the COW file to point to the new location, as already done in other cases. Additionally, given the change in the meaning of the func, change its name, invert its return value, so all values are inverted except when stat(from_cow,&buf2) fails. And add some comments and two minor bugfixes - remove a fd leak (return err rather than goto out) and a repeated check. Tested well. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
*) mark as "EXPERIMENTAL" various items that either aren't very stable or that are actively crashing the setup of users which don't really need them (i.e. HIGHMEM and 3-level pagetables on x86 - nobody needs either, everybody reports "I'm using it and getting trouble"). *) move net/Kconfig near to the rest of network configurations, and drivers/block/Kconfig near "Block layer" submenu. *) it's useless and doesn't work well to force NETDEVICES on and to disable the prompt like it's done. Better remove the attempt, and change that to a simple "default y if UML". *) drop the warning about "report problems about HPPFS" - it's redundant anyway, as that's the usual procedure, and HPPFS users are especially technical (i.e. they know reporting bugs is _good_). Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Ugly trick to help make malloc not sleeping - we can't do anything else. But this is not yet optimal, since spinlock don't trigger in_atomic() when preemption is disabled. Also, even if ugly, this was already used in one place, and was even more bogus. Fix it. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In a previous patch I shifted an allocation to being atomic. In this patch, a better but more intrusive solution is implemented, i.e. hold the lock only when really needing it, especially not over pipe operations, nor over the culprit allocation. Additionally, while at it, add a missing kfree in the failure path, and make sure that if we fail in forking, write_sigio_pid is -1 and not, say, -ENOMEM. And fix whitespace, at least for things I was touching anyway. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
In this error path, when the interface has had a problem, we call dev_close(), which is disallowed for two reasons: *) takes again the UML internal spinlock, inside the ->stop method of this device *) can be called in process context only, while we're in interrupt context. I've also thought that calling dev_close() may be a wrong policy to follow, but it's not up to me to decide that. However, we may end up with multiple dev_close() queued on the same device. But the initial test for (dev->flags & IFF_UP) makes this harmless, though - and dev_close() is supposed to care about races with itself. So there's no harm in delaying the shutdown, IMHO. Something to mark the interface as "going to shutdown" would be appreciated, but dev_deactivate has the same problems as dev_close(), so we can't use it either. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Pre-clear transport-specific private structure before passing it down. In fact, I just got a slab corruption and kernel panic on exit because kfree() was called on a pointer which probably was never allocated, BUT hadn't been set to NULL by the driver. As the code is full of such errors, I've decided for now to go the safe way (we're talking about drivers), and to do the simple thing. I'm also starting to fix drivers, and already sent a patch for the daemon transport. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
Avoid uninitialized data in the daemon_data structure. I used this transport before doing proper setup before-hand, and I got some very nice SLAB corruption due to freeing crap pointers. So just make sure to clear everything when appropriate. Signed-off-by:
-
Paolo 'Blaisorblade' Giarrusso authored
I added this line to share this file with UML, but now it's no longer shared so remove this useless leftover. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Bodo Stroesser authored
Some fixes to make softints work in tt mode. Signed-off-by:
-
Jeff Dike authored
Now that we are doing soft interrupts, there's no point in using sigsetjmp and siglongjmp. Using setjmp and longjmp saves a sigprocmask on every jump. Signed-off-by:
-
Jeff Dike authored
This patch implements soft interrupts. Interrupt enabling and disabling no longer map to sigprocmask. Rather, a flag is set indicating whether interrupts may be handled. If a signal comes in and interrupts are marked as OK, then it is handled normally. If interrupts are marked as off, then the signal handler simply returns after noting that a signal needs handling. When interrupts are enabled later on, this pending signals flag is checked, and the IRQ handlers are called at that point. The point of this is to reduce the cost of local_irq_save et al, since they are very much more common than the signals that they are enabling and disabling. Soft interrupts produce a speed-up of ~25% on a kernel build. Subtleties - UML uses sigsetjmp/siglongjmp to switch contexts. sigsetjmp has been wrapped in a save_flags-like macro which remembers the interrupt state at setjmp time, and restores it when it is longjmp-ed back to. The enable_signals function has to loop because the IRQ handler disables interrupts before returning. enable_signals has to return with signals enabled, and signals may come in between the disabling and the return to enable_signals. So, it loops for as long as there are pending signals, ensuring that signals are enabled when it finally returns, and that there are no pending signals that need to be dealt with. Signed-off-by: -
Jeff Dike authored
Stop using global variables to hold the file descriptor and offset used to map the skas0 stubs. Instead, calculate them using the page physical addresses. Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel/skas dir). This moves all systemcalls from skas/process.c file under os-Linux dir and join skas/process.c and skas/process_kern.c files. Signed-off-by:
Gennady Sharapov <gennady.v.sharapov@intel.com> Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel/skas dir). This moves all systemcalls from skas/mem_user.c file under os-Linux dir and join skas/mem_user.c and skas/mem.c files. Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves skas headers to arch/um/include. Signed-off-by:
-
Bodo Stroesser authored
Current implementation of boot_timer_handler isn't usable for s390. So I changed its name to do_boot_timer_handler, taking (struct sigcontext *)sc as argument. do_boot_timer_handler is called from new boot_timer_handler() in arch/um/os-Linux/signal.c, which uses the same mechanisms as other signal handler to find out sigcontext pointer. Signed-off-by:
Bodo Stroesser <bstroesser@fujitsu-siemens.com> Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from time.c file under os-Linux dir and joins time.c and tine_kernel.c files Signed-off-by:
-
Gennady Sharapov authored
The serial UML OS-abstraction layer patch (um/kernel dir). This moves all systemcalls from user_util.c file under os-Linux dir Signed-off-by:
-
Bodo Stroesser authored
s390 doesn't have a LDT. So MM_COPY_SEGMENTS will not be supported on s390. The only user of MM_COPY_SEGMENTS is new_mm(), but that's no longer useful, as arch/sys-i386/ldt.c defines init_new_ldt(), which is called immediately after new_mm(). So we should copy host's LDT in init_new_ldt(), if /proc/mm is available, to have this subarch specific call in subarch code. Signed-off-by:
-
Jeff Dike authored
Add implementations of the write* and __raw_write* functions. __raw_writel is needed by lib/iocopy.c, which shouldn't be used in UML, but which is unconditionally linked in anyway. Signed-off-by:
-
Christoph Lameter authored
Move the interrupt check from slab_node into ___cache_alloc and adds an "unlikely()" to avoid pipeline stalls on some architectures. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Christoph Lameter authored
This patch fixes a regression in 2.6.14 against 2.6.13 that causes an imbalance in memory allocation during bootup. The slab allocator in 2.6.13 is not numa aware and simply calls alloc_pages(). This means that memory policies may control the behavior of alloc_pages(). During bootup the memory policy is set to MPOL_INTERLEAVE resulting in the spreading out of allocations during bootup over all available nodes. The slab allocator in 2.6.13 has only a single list of slab pages. As a result the per cpu slab cache and the spinlock controlled page lists may contain slab entries from off node memory. The slab allocator in 2.6.13 makes no effort to discern the locality of an entry on its lists. The NUMA aware slab allocator in 2.6.14 controls locality of the slab pages explicitly by calling alloc_pages_node(). The NUMA slab allocator manages slab entries by having lists of available slab pages for each node. The per cpu slab cache can only contain slab entries associated with the node local to the processor. This guarantees that the default allocation mode of the slab allocator always assigns local memory if available. Setting MPOL_INTERLEAVE as a default policy during bootup has no effect anymore. In 2.6.14 all node unspecific slab allocations are performed on the boot processor. This means that most of key data structures are allocated on one node. Most processors will have to refer to these structures making the boot node a potential bottleneck. This may reduce performance and cause unnecessary memory pressure on the boot node. This patch implements NUMA policies in the slab layer. There is the need of explicit application of NUMA memory policies by the slab allcator itself since the NUMA slab allocator does no longer let the page_allocator control locality. The check for policies is made directly at the beginning of __cache_alloc using current->mempolicy. The memory policy is already frequently checked by the page allocator (alloc_page_vma() and alloc_page_current()). So it is highly likely that the cacheline is present. For MPOL_INTERLEAVE kmalloc() will spread out each request to one node after another so that an equal distribution of allocations can be obtained during bootup. It is not possible to push the policy check to lower layers of the NUMA slab allocator since the per cpu caches are now only containing slab entries from the current node. If the policy says that the local node is not to be preferred or forbidden then there is no point in checking the slab cache or local list of slab pages. The allocation better be directed immediately to the lists containing slab entries for the allowed set of nodes. This way of applying policy also fixes another strange behavior in 2.6.13. alloc_pages() is controlled by the memory allocation policy of the current process. It could therefore be that one process is running with MPOL_INTERLEAVE and would f.e. obtain a new page following that policy since no slab entries are in the lists anymore. A page can typically be used for multiple slab entries but lets say that the current process is only using one. The other entries are then added to the slab lists. These are now non local entries in the slab lists despite of the possible availability of local pages that would provide faster access and increase the performance of the application. Another process without MPOL_INTERLEAVE may now run and expect a local slab entry from kmalloc(). However, there are still these free slab entries from the off node page obtained from the other process via MPOL_INTERLEAVE in the cache. The process will then get an off node slab entry although other slab entries may be available that are local to that process. This means that the policy if one process may contaminate the locality of the slab caches for other processes. This patch in effect insures that a per process policy is followed for the allocation of slab entries and that there cannot be a memory policy influence from one process to another. A process with default policy will always get a local slab entry if one is available. And the process using memory policies will get its memory arranged as requested. Off-node slab allocation will require the use of spinlocks and will make the use of per cpu caches not possible. A process using memory policies to redirect allocations offnode will have to cope with additional lock overhead in addition to the latency added by the need to access a remote slab entry. Changes V1->V2 - Remove #ifdef CONFIG_NUMA by moving forward declaration into prior #ifdef CONFIG_NUMA section. - Give the function determining the node number to use a saner name. Signed-off-by:
-
Ingo Molnar authored
Convert mm/swapfile.c's swapon_sem to swapon_mutex. Signed-off-by:
-
Christoph Lameter authored
proc support for zone reclaim This patch creates a proc entry /proc/sys/vm/zone_reclaim_mode that may be used to override the automatic determination of the zone reclaim made on bootup. Signed-off-by:
-
Christoph Lameter authored
Some bits for zone reclaim exists in 2.6.15 but they are not usable. This patch fixes them up, removes unused code and makes zone reclaim usable. Zone reclaim allows the reclaiming of pages from a zone if the number of free pages falls below the watermarks even if other zones still have enough pages available. Zone reclaim is of particular importance for NUMA machines. It can be more beneficial to reclaim a page than taking the performance penalties that come with allocating a page on a remote zone. Zone reclaim is enabled if the maximum distance to another node is higher than RECLAIM_DISTANCE, which may be defined by an arch. By default RECLAIM_DISTANCE is 20. 20 is the distance to another node in the same component (enclosure or motherboard) on IA64. The meaning of the NUMA distance information seems to vary by arch. If zone reclaim is not successful then no further reclaim attempts will occur for a certain time period (ZONE_RECLAIM_INTERVAL). This patch was discussed before. See http://marc.theaimsgroup.com/?l=linux-kernel&m=113519961504207&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113408418232531&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113389027420032&w=2 http://marc.theaimsgroup.com/?l=linux-kernel&m=113380938612205&w=2Signed-off-by:
-
Christoph Lameter authored
Zone reclaim has a huge impact on NUMA performance (f.e. our maximum throughput with XFS is raised from 4GB to 6GB/sec / page cache contamination of numa nodes destroys locality if one just does a large copy operation which results in performance dropping for good until reboot). This patch: Resurrect may_swap in struct scan_control Signed-off-by:
-
Christoph Lameter authored
Simplify migrate_page_add after feedback from Hugh. This also allows us to drop one parameter from migrate_page_add. Signed-off-by:
-
Nick Piggin authored
Migration code currently does not take a reference to target page properly, so between unlocking the pte and trying to take a new reference to the page with isolate_lru_page, anything could happen to it. Fix this by holding the pte lock until we get a chance to elevate the refcount. Other small cleanups while we're here. Signed-off-by:
Nick Piggin <npiggin@suse.de> Signed-off-by:
-
Andrew Morton authored
Ravikiran reports that this variable is bouncing all around nodes on NUMA machines, causing measurable performance problems. Fix that up by only writing to it when it actually changed. And put it in a new cacheline to prevent it sharing with other things (this happened). Signed-off-by:
Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by:
-
