An error occurred fetching the project authors.
- 27 Jun, 2008 1 commit
-
-
Michael Buesch authored
This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
- 26 Jun, 2008 39 commits
-
-
Harvey Harrison authored
Removes now unused fc local var and uses the new ieee80211_hdrlen which directly uses the le16 frame control value. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
This modifies mac80211 to only have a single function calling the TX handlers rather than them being invoked in multiple places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
We don't need these two dump-files anymore, as we can easily do this in userspace now. Use b43-fwdump from the b43-tools repository to dump microcode registers. Use "b43-fwdump -s" to dump SHM (or use -S to do a binary dump) Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This adds an atomic mask/set capability to the debugfs MMIO interface. This is needed to support mask and/or set operations from the userspace debugging tools. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This adds debugfs files for random SHM access. This is needed in order to implement firmware and driver debugging scripts in userspace. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Michael Buesch authored
This adds debugfs files for reading and writing arbitrary wireless core registers. This is useful for debugging. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
David Ellingsworth posted a bug that was only noticable on UP/NO-PREEMPT and Michael correctly analysed it to be a spin_lock_bh() section within a spin_lock_irqsave() section. This adds a separate spinlock for the sta_info flags to fix that issue and avoid having to take much care about where the sta flag manipulation functions are called. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Reported-By: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Adding shared key authentication is not going to happen anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Without the preallocated DMA we can now safely increase the queue size withotu negative impact on the memory requirements of rt2x00. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
Sparse produces warnings about nested contain_of() statements, this means that lines like: interface_to_usbdev(to_usb_interface(rt2x00dev->dev)); will upset sparse. Add a new macro to rt2x00usb.h which will convert to device structure to the usb_device pointer in 2 steps to prevent this sparse warning. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
With a bit of code moving to rt2x00lib within the TX and RX paths we can now remove a lot of EXPORT_SYMBOL_GPL() statements. This cleans up the interface between rt2x00lib and the drivers and has the additional benefit that rt2x00pci and rt2x00usb are trimmed down in size as well since they have less to do. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
The current PCI drivers require a lot of pre-allocated DMA buffers. Reduce this by using dynamically mapped skb's (using pci_map_single) instead of the pre- allocated DMA buffers that are allocated at device start-up time. At the same time move common RX path code into rt2x00lib from rt2x00pci and rt2x00usb, as the RX paths now are now almost the same. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
In preparation of replacing the statically allocated DMA buffers with dynamically mapped skbs, centralize the allocation of RX skbs to rt2x00queue.c and let rt2x00pci already use them. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
At the same time clean up the device administration a bit, by storing a pointer to struct device instead of a void pointer that is dependent on the type of device. The normal PCI and USB subsystem provided macros can be used to convert the device pointer to the right type. This makes the rt2x00 driver a bit more type-safe. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Gertjan van Wingerde authored
The skbs containing the beacons weren't properly cleaned up for rt2400pci, rt2500pci, rt61pci, and rt73usb. Clean up those skbs in the manner appropriate for each driver. Signed-off-by: Gertjan van Wingerde <gwingerde@kpnplanet.nl> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Ivo van Doorn authored
With the introduction of the ieee80211 fc handlers we can now remove the rt2x00.h versions to use the global versions. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Reviewed-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Stephen Rothwell authored
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Assaf Krauss authored
This patch handles the 11h measurement request information element. This is minimal requested implementation - refuse measurement. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Assaf Krauss authored
This patch introduces parsing of 11h and 11d related elements from incoming management frames. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Harvey Harrison authored
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Adrian Bunk authored
The latest trace about usage of this driver I found was an (unanswered) request for help by a user trying to get it working reliably five years ago with kernel 2.4 . And even if it was still working the use cases of this driver (requiring both the hardware and someone providing this kind of wireless network) have become practically nonexisting. This patch therefore removes the strip driver. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Improve the documentation of how to use the rfkill class in kernel drivers, based on the doubts that came up in a thread in linux-wireless. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
The current naming of rfkill_state causes a lot of confusion: not only the "kill" in rfkill suggests negative logic, but also the fact that rfkill cannot turn anything on (it can just force something off or stop forcing something off) is often forgotten. Rename RFKILL_STATE_OFF to RFKILL_STATE_SOFT_BLOCKED (transmitter is blocked and will not operate; state can be changed by a toggle_radio request), and RFKILL_STATE_ON to RFKILL_STATE_UNBLOCKED (transmitter is not blocked, and may operate). Also, add a new third state, RFKILL_STATE_HARD_BLOCKED (transmitter is blocked and will not operate; state cannot be changed through a toggle_radio request), which is used by drivers to indicate a wireless transmiter was blocked by a hardware rfkill line that accepts no overrides. Keep the old names as #defines, but document them as deprecated. This way, drivers can be converted to the new names *and* verified to actually use rfkill correctly one by one. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Rework the documentation so as to make sure driver writers understand exactly where the boundaries are for input drivers related to rfkill switches, buttons and keys, and rfkill class drivers. Also fix a small error in the documentation: setting the state of a normal instance of the rfkill class does not affect the state of any other devices (unless they are tied by firmware/hardware somehow). Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
SW_RFKILL_ALL is the "emergency power-off all radios" input event. It must be handled, and must always do the same thing as far as the rfkill system is concerned: all transmitters are to go *immediately* offline. For safety, do NOT allow userspace to override EV_SW SW_RFKILL_ALL OFF. As long as rfkill-input is loaded, that event will *always* be processed, and it will *always* force all rfkill switches to disable all wireless transmitters, regardless of user_claim attribute or anything else. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Fabien Crespel authored
The whole current_state thing seems completely useless and a source of problems in rfkill-input, since state comparison is already done in rfkill, and rfkill-input is more than likely to become out of sync with the real state. Signed-off-by: Fabien Crespel <fabien@crespel.net> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Use the notification chains to also send uevents, so that userspace can be notified of state changes of every rfkill switch. Userspace should use these events for OSD/status report applications and rfkill GUI frontends. HAL might want to broadcast them over DBUS, for example. It might be also useful for userspace implementations of rfkill-input, or to use HAL as the platform driver which promotes rfkill switch change events into input events (to synchronize all other switches) when necessary for platforms that lack a convenient platform-specific kernel module to do it. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
We will need access to the rfkill switch type in string format for more than just sysfs. Therefore, move it to a generic helper. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Add a notifier chain for use by the rfkill class. This notifier chain signals the following events (more to be added when needed): 1. rfkill: rfkill device state has changed A pointer to the rfkill struct will be passed as a parameter. The notifier message types have been added to include/linux/rfkill.h instead of to include/linux/notifier.h in order to avoid the madness of modifying a header used globally (and that triggers an almost full tree rebuild every time it is touched) with information that is of interest only to code that includes the rfkill.h header. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
The resume handler should reset the wireless transmitter rfkill state to exactly what it was when the system was suspended. Do it, and do it using the normal routines for state change while at it. The suspend handler should force-switch the transmitter to blocked state, ignoring caches. Do it. Also take an opportunity shot to rfkill_remove_switch() and also force the transmitter to blocked state there, bypassing caches. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Unfortunately, instead of adding a generic Wireless WAN type, a technology- specific type (WiMAX) was added. That's useless for other WWAN devices, such as EDGE, UMTS, X-RTT and other such radios. Add a WWAN rfkill type for generic wireless WAN devices. No keys are added as most devices really want to use KEY_WLAN for WWAN control (in a cycle of none, WLAN, WWAN, WLAN+WWAN) and need no specific keycode added. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Iñaky Pérez-González <inaky.perez-gonzalez@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Currently, rfkill support for read/write rfkill switches is hacked through a round-trip over the input layer and rfkill-input to let a driver sync rfkill->state to hardware changes. This is buggy and sub-optimal. It causes real problems. It is best to think of the rfkill class as supporting only write-only switches at the moment. In order to implement the read/write functionality properly: Add a get_state() hook that is called by the class every time it needs to fetch the current state of the switch. Add a call to this hook every time the *current* state of the radio plays a role in a decision. Also add a force_state() method that can be used to forcefully syncronize the class' idea of the current state of the switch. This allows for a faster implementation of the read/write functionality, as a driver which get events on switch changes can avoid the need for a get_state() hook. If the get_state() hook is left as NULL, current behaviour is maintained, so this change is fully backwards compatible with the current rfkill drivers. For hardware that issues events when the rfkill state changes, leave get_state() NULL in the rfkill struct, set the initial state properly before registering with the rfkill class, and use the force_state() method in the driver to keep the rfkill interface up-to-date. get_state() can be called by the class from atomic context. It must not sleep. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Currently, radios are always enabled when their rfkill interface is registered. This is not optimal, the safest state for a radio is to be offline unless the user turns it on. Add a module parameter that causes all radios to be disabled when their rfkill interface is registered. The module default is not changed so unless the parameter is used, radios will still be forced to their enabled state when they are registered. The new rfkill module parameter is called "default_state". Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Teach rfkill-input how to handle SW_RFKILL_ALL events (new name for the SW_RADIO event). SW_RFKILL_ALL is an absolute enable-or-disable command that is tied to all radios in a system. Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Henrique de Moraes Holschuh authored
Fix a minor typo in an exported function documentation Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-