- 14 Jan, 2020 13 commits
-
-
Matt Roper authored
I don't think we've ever hit these new error codes, but they're documented in the gen11 pcode document, so we might as well add them to the handler. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200111014511.2988923-1-matthew.d.roper@intel.comReviewed-by:
José Roberto de Souza <jose.souza@intel.com>
-
José Roberto de Souza authored
Renaming to match the BSpec and struct name. BSpec: 20150 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110235045.176640-1-jose.souza@intel.com
-
José Roberto de Souza authored
TGL has now a table for RBR and HBR and another table for HBR2 over combo phys. The HBR2 one has some small changes comparing to the ICL one, so adding two new tables and adding a function to return TGL combo phy tables. v2: - reordered the tgl_combo_phy_ddi_translations_dp_hbr2 to reduce diff (Matt) - removed definition of rates, kept using raw number(Jani and Ville) - changed code to use icl_get_combo_buf_trans() for non-DP as those are equal between TGL and ICL(Matt) BSpec: 49291 Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Chris Wilson authored
Add a i915_vma to the mock_engine/mock_ring so that the core code can always assume the presence of ring->vma. Fixes: 8ccfc20a ("drm/i915/gt: Mark ring->vma as active while pinned") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200114160030.2468927-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
intel_prepare_plane_fb() will always pin plane_state->hw.fb whenever it is present. We copy that from the master plane to the slave plane, but we fail to copy the corresponding ggtt view. Thus when it comes time to pin the slave plane's fb we use some stale ggtt view left over from the last time the plane was used as a non-slave plane. If that previous use involved 90/270 degree rotation or remapping we'll try to shuffle the pages of the new fb around accordingingly. However the new fb may be backed by a bo with less pages than what the ggtt view rotation/remapped info requires, and so we we trip a GEM_BUG(). Steps to reproduce on icl: 1. plane 1: whatever plane 6: largish !NV12 fb + 90 degree rotation 2. plane 1: smallish NV12 fb plane 6: make invisible so it gets slaved to plane 1 3. GEM_BUG() Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/951 Fixes: 1f594b20 ("drm/i915: Remove special case slave handling during hw programming, v3.") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110183228.8199-1-ville.syrjala@linux.intel.comReviewed-by:
-
Chris Wilson authored
Take and hold a reference to each of the vma (and their objects) as we process them with the cmdparser. This stops them being freed during the work if the GEM execbuf is interrupted and the request we expected to keep the objects alive is incomplete. Fixes: 686c7c35 ("drm/i915/gem: Asynchronous cmdparser") Closes: https://gitlab.freedesktop.org/drm/intel/issues/970Signed-off-by:
-
Michal Wajdeczko authored
While we have function that returns "next fence" that can be used by new CT request, we internally store value of the last used fence. Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Michal Wajdeczko authored
Update GuC CTB action helpers to benefit from new CT_ERROR macro. Signed-off-by:
-
Michal Wajdeczko authored
We should start using dev variants of error logging and to simplify that introduce helper macro that will do any necessary conversions to obtain pointer to device struct. Signed-off-by:
-
Michal Wajdeczko authored
We need CT message size in bytes so just use that in helper var. Signed-off-by:
-
Chris Wilson authored
On suspend, the rc6 residency counters (stored in HW registers) will be lost and cleared. However, we keep track of the rc6 residency to provide a continuous 64b sampling, and if we see the HW value go backwards, we assume it overflowed and add on 32b/40b -- an interesting artifact when sampling across suspend. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200114105648.2172026-2-chris@chris-wilson.co.uk
-
Chris Wilson authored
The rc6 residency starts ticking from 0 from BIOS POST, but the kernel starts measuring the time from its boot. If we start measuruing I915_PMU_RC6_RESIDENCY while the GT is idle, we start our sampling from 0 and then upon first activity (park/unpark) add in all the rc6 residency since boot. After the first park with the sampler engaged, the sleep/active counters are aligned. v2: With a wakeref to be sure Closes: https://gitlab.freedesktop.org/drm/intel/issues/973 Fixes: df6a4205 ("drm/i915/pmu: Ensure monotonic rc6") Signed-off-by:
-
Jani Nikula authored
Signed-off-by:
-
- 13 Jan, 2020 8 commits
-
-
Chris Wilson authored
Currently, we reset the timer after a pre-eemption event. This has the side-effect that the timeslice runs into the second context after the first is completed after a normal promotion event, causing the second context to be swapped out early and switched for a third context. To be more fair, we want to reset the clock after promotion as well. Signed-off-by:
-
Zhang Xiaoxu authored
If 'CONFIG_DRM_I915_CAPTURE_ERROR' not configured, there is an error when compile the kernel: drivers/gpu/drm/i915/gt/intel_reset.c: In function intel_gt_handle_error: drivers/gpu/drm/i915/gt/intel_reset.c:1233:3: error: too few arguments to function i915_capture_error_state i915_capture_error_state(gt->i915); ^~~~~~~~~~~~~~~~~~~~~~~~ In file included from ./drivers/gpu/drm/i915/i915_drv.h:97:0, from ./drivers/gpu/drm/i915/display/intel_display_types.h:46, from drivers/gpu/drm/i915/gt/intel_reset.c:10: ./drivers/gpu/drm/i915/i915_gpu_error.h:267:20: note: declared here static inline void i915_capture_error_state(struct drm_i915_private *dev_priv, Fixes: 742379c0 ("drm/i915: Start chopping up the GPU error capture") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by:
-
Zhang Xiaoxu authored
If 'CONFIG_DRM_I915_CAPTURE_ERROR' not configured, there are some errors like: drivers/gpu/drm/i915/i915_irq.o: In function `i915_vma_capture_finish': ./drivers/gpu/drm/i915/i915_gpu_error.h:312: multiple definition of `i915_vma_capture_finish' drivers/gpu/drm/i915/i915_drv.o: ./drivers/gpu/drm/i915/i915_gpu_error.h:312: first defined here So, add 'static inline' on the defineation of the 'i915_vma_capture_finish' Fixes: d713e3ab("drm/i915: Correct typo in i915_vma_compress_finish stub") Reported-by:
-
Ville Syrjälä authored
Just use the passed in encoder instead of digging it out via the legacy drm_connector->encoder pointer (which we'll want to stop using). Signed-off-by:
Ramalingam C <ramalingam.c@intel.com>
-
Ville Syrjälä authored
Lots of enc_to_foo(&encoder->base) around. Simplify by passing in the intel_encoder instead. @find@ identifier F =~ "^enc_to_.*"; identifier E; @@ F(struct drm_encoder *E) { ... } @@ identifier find.F; identifier find.E; @@ F( - struct drm_encoder *E + struct intel_encoder *encoder ) { <... - E + &encoder->base ...> } @@ identifier find.F; expression E; @@ - F(E) + F(to_intel_encoder(E)) @@ expression E; @@ - to_intel_encoder(&E->base) + E Signed-off-by:Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
-
Ville Syrjälä authored
Life is usually easier when we pass around intel_ types instead of drm_ types. In this case it might not be, but I think being consistent is a good thing anyway. Also some of this might get cleaned up a bit more later as we keep propagating the intel_ types further. @find@ identifier F =~ "^intel_attached_.*"; identifier C; @@ F(struct drm_connector *C) { ... } @@ identifier find.F; identifier find.C; @@ F( - struct drm_connector *C + struct intel_connector *connector ) { <... - C + &connector->base ...> } @@ identifier find.F; expression C; @@ - F(C) + F(to_intel_connector(C)) @@ expression C; @@ - to_intel_connector(&C->base) + C Signed-off-by:Mika Kahola <mika.kahola@intel.com>
-
Stanislav Lisovskiy authored
There seems to be some undocumented bandwidth bottleneck/dependency which scales with CDCLK, causing FIFO underruns when CDCLK is too low, even when it's correct from BSpec point of view. Currently for TGL platforms we calculate min_cdclk initially based on pixel_rate divided by 2, accounting for also plane requirements, however in some cases the lowest possible CDCLK doesn't work and causing the underruns. We've found experimentally that raising cdclk to at least pixel_rate (rather than pixel_rate/2) eliminates these underruns, so let's use this as a temporary workaround until the hardware team can suggest a more precise remedy. Explicitly stating here that this seems to be currently rather a Hack, than final solution. v2: Use clamp operation instead of min(Matt Roper) v3: - Fixed commit message(Matt Roper) - Now using pixel_rate instead of max_cdclk(Jani Nikula) - Switched to max from clamp(Ville Syrjälä) Hopefully this hybrid satisfies everyone :) Reviewed-by:Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Closes: https://gitlab.freedesktop.org/drm/intel/issues/402Signed-off-by:
-
Tvrtko Ursulin authored
We use PCI device path in the registered PMU name in order to distinguish between multiple GPUs. But since tools/perf reserves a special meaning to dash and colon characters we need to transliterate them to something else. We choose an underscore. v2: * Use strreplace. (Chris) * Dashes are not good either. (Chris) Signed-off-by:
Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com> Fixes: 05488673 ("drm/i915/pmu: Support multiple GPUs") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Reviewed-by:
-
- 11 Jan, 2020 5 commits
-
-
Chris Wilson authored
A copy and paste error in setting up the !CONFIG_DRM_I915_CAPTURE_ERROR stubs left a conflicting duplicate declaration. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200111083007.1619228-1-chris@chris-wilson.co.uk
-
Michal Wajdeczko authored
uC sanitization is only meaningful if we are running with uC present or enabled. Make this function part of the uc_ops. Signed-off-by:
-
Michal Wajdeczko authored
uC preparation and cleanup steps are only meaningful if we are running with uC enabled. Make these functions part of the uc_ops. Signed-off-by:
-
Michal Wajdeczko authored
Firmware fetching and cleanup steps are only meaningful if we are running with uC enabled. Make these functions part of the uc_ops. Signed-off-by:
-
Michal Wajdeczko authored
Instead of spreading multiple conditionals across the uC code to find out current mode of uC operation, start using predefined set of function pointers that reflect that mode. Begin with pair of init_hw/fini_hw functions that are responsible for uC hardware initialization and cleanup. v2: drop ops_none, use macro to generate ops helpers v3: reuse __uc_check_hw to avoid redundant comment v4: forward declare ops struct vs functions Signed-off-by:
-
- 10 Jan, 2020 14 commits
-
-
Chris Wilson authored
We need to hold the runtime-pm wakeref to update the global PTEs (as they exist behind a PCI BAR). However, some systems invoke ACPI during runtime resume and so require allocations, which is verboten inside the vm->mutex. Ergo, we must not use intel_runtime_pm_get() inside the mutex, but lift the call outside. Closes: https://gitlab.freedesktop.org/drm/intel/issues/958Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200110144418.1415639-1-chris@chris-wilson.co.uk
-
Vivek Kasireddy authored
Parsing the i2c element is mainly done to transfer the payload from the MIPI sequence block to the relevant slave device. In some cases, the commands that are part of the payload can be used to turn on the backlight. This patch is actually a refactored version of this old patch: https://lists.freedesktop.org/archives/intel-gfx/2014-December/056897.html In addition to the refactoring, the original patch is augmented by looking up the i2c bus from ACPI NS instead of relying on the bus number provided in the VBT. This patch was tested on Aava Mobile's Inari 10 tablet. It enabled turning on the backlight by transferring the payload to the device. v2: - Add DRM_DEV_ERROR for invalid adapter and failed transfer and also drop the DRM_DEBUG that existed originally. (Hans) - Add two gotos instead of one to clean things up properly. v3: - Identify the device on which this patch was tested in the commit message (Ville) Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nabendu Maiti <nabendu.bikash.maiti@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
-
Chris Wilson authored
The list of requests from after the hang tells little about the hang itself, only how busy userspace was after the fact. As it pertains nothing to the HW state, drop it from the error state. Signed-off-by:
-
Chris Wilson authored
The shadow ring regs (ring->head, ring->tail) are meaningless in the post-mortem dump as they do not related to anything on HW. Remove them from the coredump. Signed-off-by:
-
Chris Wilson authored
While this is technically the batch as executed by the HW (in part at least), it is confusing, and only used for a minority of gen. Signed-off-by:
-
Chris Wilson authored
In the near future, we will want to start a GPU error capture from a new context, from inside the softirq region of a forced preemption. To do so requires us to break up the monolithic error capture to provide new entry points with finer control; in particular focusing on one engine/gt, and being able to compose an error state from little pieces of HW capture. Signed-off-by:
-
Chris Wilson authored
As we use the active state to keep the vma alive while we are reading its contents during GPU error capture, we need to mark the ring->vma as active during execution if we want to include the rinbuffer in the error state. Reported-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: b1e3177b ("drm/i915: Coordinate i915_active with its own mutex") Signed-off-by:
-
Chris Wilson authored
As we use the active state to keep the vma alive while we are reading its contents during GPU error capture, we need to mark the context->state vma as active during execution if we want to include it in the error state. Reported-by:
-
Chris Wilson authored
Currently we first to try to unbind the VMA (and lazily rebind on next use) as an optimisation during restore_ggtt_mappings. Ideally, the only objects in the GGTT upon resume are the pinned kernel objects which can't be unbound and need to be restored. As the unbind interferes with the plan to mark those objects as active for error capture, forgo the optimisation. Signed-off-by:
-
Wambui Karuga authored
Convert to the use of new struct drm_device based logging macros to replace the use of the printk based macros in i915/intel_uncore.c Signed-off-by:
Wambui Karuga <wambui.karugax@gmail.com> Signed-off-by:
-
Wambui Karuga authored
Replace the use of printk based debugging macros with the struct drm_device based logging macros in i915/intel_sideband.c. Signed-off-by:
-
Wambui Karuga authored
Replace instances of printk based logging macros with the new struct drm_device logging macros in i915/intel_region_lmem.c. Signed-off-by:
-
Wambui Karuga authored
This converts various instances of the struct device and printk based logging macros with the new struct drm_device based logging macros in i915/intel_pm.c Signed-off-by:
-
Wambui Karuga authored
Convert the use of the DRM_DEBUG_KMS() logging macro to the new struct drm_device based drm_dbg_kms() logging macro in i915/intel_pch.c. Signed-off-by:
-
