The UMAC and LMAC scan_stop functions are now nearly identical, so
they can be combined into a single function instead.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

We can only have one scan per type at the same time, so the code that
tries to stop several scans of a type is unnecessary.  Remove that to
reduce code complexity.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

We can only have one scan of each type running at the same time, so we
can remove one attribute in the UID information we save.  We had array
index, UID and type, but only UID (== array_index) and type are
necessary.  Refactor the code to use this simplified array.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add support for scan priority API with 8 levels instead of the
existing 3 levels. This API is needed to define the priority of
new ooc activities, e.g. gscan.
Add a TLV flag to indicate if the new API is supported so that
devices that does not support the new API will continue to use
the old one.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Some LMAC specific functions had too generic names
(i.e. *_scan_offload_*) and were hard to distinguish from functions
that are really generic.  Rename these functions to *_lmac_scan_* in
to make it more consistent and easier to read.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

For consistency with the LMAC functions, rename the UMAC scan stop
function to iwl_mvm_umac_scan_stop().  Additionally, move things
around a bit to avoid an unnecessary forward declaration.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

For UMAC scans, we were simply jumping into another function when scan
stop functions were called, while for LMAC scans, the flow continued.
To make the flows cleaner and more balanced, combine the UMAC part
into the main stop functions.  This also makes us take one step closer
into combining the state flags for both APIs.

Note that some STOPPING flags will be dangling in UMAC scans, but it
doesn't matter because they are not used in UMAC yet (and this will be
fixed in subsequent patches).
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

It is not necessary to stop regular scans when going out of idle
state.  Previously, we were doing so for LMAC scans because the
iwl_mvm_scan_offload_stop() function was stopping both kinds of scans.
Now that we have more granularity, we can skip it.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The iwl_mvm_scan_offload_stop() function is used to stop LMAC regular
scan, stop LMAC scheduled scan and stop UMAC scheduled scans (but not
UMAC regular scans), making it very difficult to read.

Reorganize the scan stopping functions by creating separate functions
to stop regular and scheduled scans, separating the LMAC stopping part
of the code from the rest and renaming the offload_stop function to
iwl_mvm_lmac_scan_stop().
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The commit below fixed this for the old firmware API only.
Since the new firmware API hasn't been released yet, this
doesn't fix anything on currently existing firmwares.
This completes:

commit afcee962
Author: Eyal Shapira <eyal@wizery.com>
Date:   Mon Feb 9 15:18:17 2015 +0200

    iwlwifi: mvm: fix BT coex shared antenna activity check

type=bugfix
bug=not-tracked
fixes=unknown
Reviewed-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The iwl_mvm_config_sched_scan_profiles() function is only used in
scan.c, so remove the declaration from mvm.h and make it static.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

After the scan refactor, the order of the SSIDs passed to the firmware
in all scans (including net-detect) are inverted.  This was causing
the reporting code to use the wrong SSIDs.  To fix this, invert the
array index when accessing the saved match SSIDs to report the
wake-up.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add UMAC scan iteration complete notification. This notification can
be enabled by setting scan_iter_notif_enabled through debugfs.
Upon receiving this notification, print the list of channels that
have been scanned in this iteration. This is useful for debugging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

When receiving scan iteration complete notification, print a list of
the channels that have been scanned in this iteration.
This is useful for debugging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The BT_CONFIG command used to be very long, hence it was
allocated on the heap in the previous API. In the new API,
this command is much smaller, and can now safely be
allocated on the stack.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Since we don't need to configure the Ack / CTS kill mask
anymore in the new API, we don't need to iterate all the
interfaces upon rssi event on one of the interfaces.
Remove that code.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

There is no need to have separate definitions for the UMAC scan types,
since they are the same as the LMAC types.  Remove UMAC scan types and
use the generic ones instead.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

In order to imeplement the extended VI session feature for Miracast, the FW
requires to detect the VI queue. The detection of the VI queue is done when
it is assigned to a STA with ADD_STA command, so by this time the FW expects
the queue to be already configured (mapped to VI AC and aggregation enabled).
Previously, the queue configuration was done after STA modificaton which
broke the extended VI session feature and resulted in higher latencies.
Fix this by calling iwl_mvm_enable_agg_txq before station modification.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

If the device fails to start correctly prior to loading the
regular runtime firmware (after having run the INIT firmware),
treat that error correctly by actually checking the return
value of _iwl_trans_start_hw() and stopping the device again
before returning an error.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

According to the nl80211 documentation, we can neither advertise
scheduled scan nor netdetect address randomisation. However, all
the products that currently require this don't have a need for
the full randomisation.

Therefore, advertise the feature anyway which results in host-
based randomisation, done whenever the system suspends. This is
sufficient for the platforms currently requiring this feature.

If we ever extend this in the future to do full randomisation in
the firmware, then certainly this will still be sufficient for
the current requirements, so it doesn't make a lot of sense to
split the feature bits.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

8000 devices have different thermal throttling values from previous
generations.
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Set a default NVM in case the userspace specifies a file
that doesn't match the hardware version. This allows not
to change the boot scripts when someone replaces the device
with a newer hardware step.
Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Add debugfs entry for showing the different Tx power restrictions that are
caused due to various reasons.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This was spot by Coccinelle.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The iwlmvm driver is now able to handle -14.ucode.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The transport modules all need to allocate memory and set up
certain values. Refactor that code into a new common function
to share it and to simplify the error handling.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The UMAC API supports multiple scan schedules, but now we use only a
single one.  Change the comment to make this clear and avoid
confusion.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

This removes the use of the two deprecated calls to the
macro PTR_RET in iwl_mvm_get_regdomain and replaces them
both to PTR_ERR_OR_ZERO.
Signed-off-by: Nicholas Krause <xerofoify@gmail.com>
[Commit message editing]
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

commit b112889c ("iwlwifi: mvm: add Aux ROC request/response flow")
added aux ROC flow in addition to the existing ROC flow. While doing
it, it moved the ROC reference release to a common work item, which
is being called for both the ROC and aux ROC flows.

This resulted in invalid reference accounting, as no reference was
taken in case of aux ROC, while a reference was released on completion.

Fix it by adding a reference for the aux ROC as well, and release
only the relevant references on completion (according to the set bits).

While at it, convert cancel_work_sync() to flush_work(), in order
to make sure the references are being cleaned properly.

Fixes: b112889c ("iwlwifi: mvm: add Aux ROC request/response flow")
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

We should not call the iwl_pcie_set_pwr() functions in the
suspend/resume flows for family 8000, because the register used is
locked in devices from this family.  Doing this causes an NMI
protection error (RT_NMI_INTERRUPT_PREG_PROTECTION).

To fix this, skip those calls if the device family is
IWL_DEVICE_FAMILY_8000.
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Conflicts:
	drivers/net/wireless/iwlwifi/Kconfig

qos_seq points (to a struct) inside the command response data.

Make sure to free the response only after qos_seq is not
needed anymore.
Reported-by: Heng Luo <heng.luo@intel.com>
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

If the device is reset during suspend with net-detect enabled, we
leave the net-detect information dangling and this causes the next
suspend to fail with a warning:

[21795.351010] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/d3.c:989 __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]()
[21795.353253] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) [...]
[21795.366168] CPU: 1 PID: 3645 Comm: bash Tainted: G           O 3.10.29-dev #1
[21795.368785] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012
[21795.371441]  f8ec6748 f8ec6748 e51f3ce8 c168aa62 e51f3d10 c103a824 c1871238 f8ec6748
[21795.374228]  000003dd f8eb982e f8eb982e 00000000 c3408ed4 c41edbbc e51f3d20 c103a862
[21795.377006]  00000009 00000000 e51f3da8 f8eb982e c41ee3dc 00000004 e7970000 e51f3d74
[21795.379792] Call Trace:
[21795.382461]  [<c168aa62>] dump_stack+0x16/0x18
[21795.385133]  [<c103a824>] warn_slowpath_common+0x64/0x80
[21795.387803]  [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.390485]  [<f8eb982e>] ? __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.393124]  [<c103a862>] warn_slowpath_null+0x22/0x30
[21795.395787]  [<f8eb982e>] __iwl_mvm_suspend.isra.6+0x2be/0x460 [iwlmvm]
[21795.398464]  [<f8eb9d7c>] iwl_mvm_suspend+0xec/0x140 [iwlmvm]
[21795.401127]  [<c104be11>] ? del_timer_sync+0xa1/0xc0
[21795.403800]  [<f8d4107e>] __ieee80211_suspend+0x1de/0xff0 [mac80211]
[21795.406459]  [<c168e43d>] ? mutex_lock_nested+0x25d/0x350
[21795.409084]  [<c1586b64>] ? rtnl_lock+0x14/0x20
[21795.411685]  [<f8cf0076>] ieee80211_suspend+0x16/0x20 [mac80211]
[21795.414318]  [<f8c4e014>] wiphy_suspend+0x74/0x710 [cfg80211]
[21795.416916]  [<c141e612>] __device_suspend+0x1e2/0x220
[21795.419521]  [<f8c4dfa0>] ? addresses_show+0xa0/0xa0 [cfg80211]
[21795.422097]  [<c141f997>] dpm_suspend+0x67/0x210
[21795.424661]  [<c141fd6f>] dpm_suspend_start+0x4f/0x60
[21795.427219]  [<c108d8e0>] suspend_devices_and_enter+0x60/0x480
[21795.429768]  [<c168646a>] ? printk+0x4d/0x4f
[21795.432295]  [<c108de76>] pm_suspend+0x176/0x210
[21795.434830]  [<c108ca5d>] state_store+0x5d/0xb0
[21795.437410]  [<c108ca00>] ? wakeup_count_show+0x50/0x50
[21795.439961]  [<c13208db>] kobj_attr_store+0x1b/0x30
[21795.442514]  [<c11e3a4b>] sysfs_write_file+0xab/0x100
[21795.445088]  [<c11e39a0>] ? sysfs_poll+0xa0/0xa0
[21795.447659]  [<c1179655>] vfs_write+0xa5/0x1c0
[21795.450212]  [<c1179af7>] SyS_write+0x57/0xa0
[21795.452699]  [<c1699ec1>] sysenter_do_call+0x12/0x32
[21795.455146] ---[ end trace faf5321baba2bfdb ]---

To fix this, call the iwl_mvm_free_nd() function in case of any error
during resume.  Additionally, rename the "out_unlock" label to err to
make it clearer that it's only called in error conditions.

Cc: stable@vger.kernel.org [3.19+]
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

The __iwl_mvm_resume() function always returns 1, which causes
mac80211 to do a reconfig with IEEE80211_RECONFIG_TYPE_RESTART.  This
type of reconfig calls iwl_mvm_restart_complete(), where we unref the
IWL_MVM_REF_UCODE_DOWN, so we should always take the reference in this
case.

This prevents this kind of warning from happening:

[40026.103025] WARNING: at /root/iwlwifi/iwlwifi-stack-dev/drivers/net/wireless/iwlwifi/mvm/mac80211.c:236 iwl_mvm_unref+0xc9/0xd0 [iwlmvm]()
[40026.105145] Modules linked in: iwlmvm(O) iwlwifi(O) mac80211(O) cfg80211(O) compat(O) ctr ccm arc4 autofs4 snd_hda_codec_hdmi snd_hda_codec_idt joydev coretemp kvm_intel kvm aesni_intel ablk_helper cryptd lrw aes_i586 snd_hda_intel xts snd_hda_codec gf128mul snd_hwdep snd_pcm snd_seq_midi dell_wmi snd_rawmidi sparse_keymap snd_seq_midi_event snd_seq uvcvideo dell_laptop videobuf2_core dcdbas microcode videodev psmouse snd_timer videobuf2_vmalloc videobuf2_memops serio_raw snd_seq_device btusb i915 snd bluetooth lpc_ich drm_kms_helper soundcore snd_page_alloc drm i2c_algo_bit wmi parport_pc ppdev video binfmt_misc rpcsec_gss_krb5 nfsd mac_hid nfs_acl nfsv4 auth_rpcgss nfs fscache lockd sunrpc msdos lp parport sdhci_pci sdhci ahci libahci e1000e mmc_core ptp pps_core [last unloaded: compat]
[40026.117640] CPU: 2 PID: 3827 Comm: bash Tainted: G        W  O 3.10.29-dev #1
[40026.120216] Hardware name: Dell Inc. Latitude E6430/0CPWYR, BIOS A09 12/13/2012
[40026.122815]  f8effd18 f8effd18 e740fd18 c168aa62 e740fd40 c103a824 c1871238 f8effd18
[40026.125527]  000000ec f8ec79c9 f8ec79c9 d5d29ba4 d5d2a20c 00000000 e740fd50 c103a862
[40026.128209]  00000009 00000000 e740fd7c f8ec79c9 f1c591c4 00000400 00000000 f8efb490
[40026.130886] Call Trace:
[40026.133506]  [<c168aa62>] dump_stack+0x16/0x18
[40026.136115]  [<c103a824>] warn_slowpath_common+0x64/0x80
[40026.138727]  [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.141319]  [<f8ec79c9>] ? iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.143881]  [<c103a862>] warn_slowpath_null+0x22/0x30
[40026.146453]  [<f8ec79c9>] iwl_mvm_unref+0xc9/0xd0 [iwlmvm]
[40026.149030]  [<f8ec7a4d>] iwl_mvm_mac_reconfig_complete+0x7d/0x210 [iwlmvm]
[40026.151645]  [<f8b74b20>] ? ftrace_raw_event_drv_reconfig_complete+0xc0/0xe0 [mac80211]
[40026.154291]  [<f8b6769e>] ieee80211_reconfig+0x28e/0x2620 [mac80211]
[40026.156920]  [<c10ef0ea>] ? ring_buffer_unlock_commit+0xba/0x100
[40026.159585]  [<f8b4a04d>] ieee80211_resume+0x6d/0x80 [mac80211]
[40026.162206]  [<f8a79722>] wiphy_resume+0x72/0x260 [cfg80211]
[40026.164799]  [<c141e2e7>] ? device_resume+0x57/0x150
[40026.167425]  [<f8a796b0>] ? wiphy_suspend+0x710/0x710 [cfg80211]
[40026.170075]  [<c141e26e>] dpm_run_callback+0x2e/0x50
[40026.172695]  [<c141e321>] device_resume+0x91/0x150
[40026.175334]  [<c141f636>] dpm_resume+0xf6/0x200
[40026.177922]  [<c141f920>] dpm_resume_end+0x10/0x20
[40026.180489]  [<c108d9f7>] suspend_devices_and_enter+0x177/0x480
[40026.183037]  [<c168646a>] ? printk+0x4d/0x4f
[40026.185559]  [<c108de76>] pm_suspend+0x176/0x210
[40026.188065]  [<c108ca5d>] state_store+0x5d/0xb0
[40026.190581]  [<c108ca00>] ? wakeup_count_show+0x50/0x50
[40026.193052]  [<c13208db>] kobj_attr_store+0x1b/0x30
[40026.195608]  [<c11e3a4b>] sysfs_write_file+0xab/0x100
[40026.198055]  [<c11e39a0>] ? sysfs_poll+0xa0/0xa0
[40026.200469]  [<c1179655>] vfs_write+0xa5/0x1c0
[40026.202893]  [<c1179af7>] SyS_write+0x57/0xa0
[40026.205245]  [<c1699ec1>] sysenter_do_call+0x12/0x32
[40026.207619] ---[ end trace db1d5a72a0381b0a ]---
Signed-off-by: Luciano Coelho <luciano.coelho@intel.com>
Reviewed-by: EliadX Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

There are buses that can't handle ASYNC command without
copying them. Duplicate the host command instead.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Take the MAC address from the OTP even if one is present in
the NVM, if that MAC address happens to be a reserved one.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

fw_status is the only pointer pointing to a block of memory
allocated above and should be freed after use.
Note: this come from Klockwork static analyzer.

Cc: stable@vger.kernel.org [3.19+]
Fixes: 2021a89d ("iwlwifi: mvm: treat netdetect wake up separately")
Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

A few triggers have status = MLME_SUCCESS and they are still
interesting. E.g. if we want to collect data upon deauth,
the status will be MLME_SUCCESS. Fix that.

Fixes: d42f5350 ("iwlwifi: mvm: add trigger for firmware dump upon MLME failures")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

Disabling the clocks is a standard procedure while stopping the
device. On family 8000 however, disabling the bus master DMA clock
increases the NIC's power consumption.

To fix this, skip this call if the device family is
IWL_DEVICE_FAMILY_8000.
Signed-off-by: Avri Altman <avri.altman@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

3165 really needs to load iwlwifi-7265D-13.ucode. This
device is supported starting from -13.ucode, update the
MIN and OK defines accordingly. While at it, add 3165 to
the device list in the Kconfig file.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>