- 05 Dec, 2018 15 commits
-
-
Willem de Bruijn authored
[ Upstream commit 5cd8d46e ] tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f ("net: TX_RING and packet mmap") Reported-by:
Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lorenzo Bianconi authored
[ Upstream commit ef2a7cf1 ] Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f5 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Andreas Fiedler authored
[ Upstream commit 07093b76 ] The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by:
Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 605108ac ] Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d303 ("net: gro: add a per device gro flush timer") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Bryan Whitehead authored
[ Upstream commit cc592205 ] The lan743x driver, when under heavy traffic load, has been noticed to sometimes hang, or cause a kernel panic. Debugging reveals that the TX napi poll routine was returning the wrong value, 'weight'. Most other drivers return 0. And call napi_complete, instead of napi_complete_done. Additionally when creating the tx napi poll routine. Changed netif_napi_add, to netif_tx_napi_add. Updates for v3: changed 'fixes' tag to match defined format Updates for v2: use napi_complete, instead of napi_complete_done in lan743x_tx_napi_poll use netif_tx_napi_add, instead of netif_napi_add for registration of tx napi poll routine fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
Bryan Whitehead authored
[ Upstream commit 4df5ce9b ] This driver was designed to work with both LAN7430 and LAN7431. The only difference between the two is the LAN7431 has support for external phy. This change adds LAN7431 to the list of recognized devices supported by this driver. Updates for v2: changed 'fixes' tag to match defined format fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:
-
Hugh Dickins authored
commit 06a5e126 upstream. collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before it holds page lock of the first page, racing truncation then extension might conceivably have inserted a hugepage there already. Fail with the SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or otherwise mishandling the unexpected hugepage - though later we might code up a more constructive way of handling it, with SCAN_SUCCESS. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hugh Dickins authored
commit 87c460a0 upstream. khugepaged's collapse_shmem() does almost all of its work, to assemble the huge new_page from 512 scattered old pages, with the new_page's refcount frozen to 0 (and refcounts of all old pages so far also frozen to 0). Including shmem_getpage() to read in any which were out on swap, memory reclaim if necessary to allocate their intermediate pages, and copying over all the data from old to new. Imagine the frozen refcount as a spinlock held, but without any lock debugging to highlight the abuse: it's not good, and under serious load heads into lockups - speculative getters of the page are not expecting to spin while khugepaged is rescheduled. One can get a little further under load by hacking around elsewhere; but fortunately, freezing the new_page turns out to have been entirely unnecessary, with no hacks needed elsewhere. The huge new_page lock is already held throughout, and guards all its subpages as they are brought one by one into the page cache tree; and anything reading the data in that page, without the lock, before it has been marked PageUptodate, would already be in the wrong. So simply eliminate the freezing of the new_page. Each of the old pages remains frozen with refcount 0 after it has been replaced by a new_page subpage in the page cache tree, until they are all unfrozen on success or failure: just as before. They could be unfrozen sooner, but cause no problem once no longer visible to find_get_entry(), filemap_map_pages() and other speculative lookups. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Hugh Dickins authored
commit 042a3082 upstream. Several cleanups in collapse_shmem(): most of which probably do not really matter, beyond doing things in a more familiar and reassuring order. Simplify the failure gotos in the main loop, and on success update stats while interrupts still disabled from the last iteration. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit 2af8ff29 upstream. Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp flags khugepaged uses to allocate a huge page - in all common cases it would just be a waste of effort - so collapse_shmem() must remember to clear out any holes that it instantiates. The obvious place to do so, where they are put into the page cache tree, is not a good choice: because interrupts are disabled there. Leave it until further down, once success is assured, where the other pages are copied (before setting PageUptodate). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit aaa52e34 upstream. Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later closed and unlinked. khugepaged's collapse_shmem() was forgetting to update mapping->nrpages on the rollback path, after it had added but then needs to undo some holes. There is indeed an irritating asymmetry between shmem_charge(), whose callers want it to increment nrpages after successfully accounting blocks, and shmem_uncharge(), when __delete_from_page_cache() already decremented nrpages itself: oh well, just add a comment on that to them both. And shmem_recalc_inode() is supposed to be called when the accounting is expected to be in balance (so it can deduce from imbalance that reclaim discarded some pages): so change shmem_charge() to update nrpages earlier (though it's rare for the difference to matter at all). Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils Fixes: 800d8c63 ("shmem: add huge pages support") Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
-
Hugh Dickins authored
commit 701270fa upstream. Huge tmpfs testing showed that although collapse_shmem() recognizes a concurrently truncated or hole-punched page correctly, its handling of holes was liable to refill an emptied extent. Add check to stop that. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils Fixes: f3f0e1d2 ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by:
Matthew Wilcox <willy@infradead.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by:
-
Hugh Dickins authored
commit 006d3ff2 upstream. Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that __split_huge_page() was using i_size_read() while holding the irq-safe lru_lock and page tree lock, but the 32-bit i_size_read() uses an irq-unsafe seqlock which should not be nested inside them. Instead, read the i_size earlier in split_huge_page_to_list(), and pass the end offset down to __split_huge_page(): all while holding head page lock, which is enough to prevent truncation of that extent before the page tree lock has been taken. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils Fixes: baa355fd ("thp: file pages support for split_huge_page()") Signed-off-by:
-
Hugh Dickins authored
commit 173d9d9f upstream. Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page). Move the setting of mapping and index up before the page_ref_unfreeze() in __split_huge_page_tail() to fix this: so that a page cache lookup cannot get a reference while the tail's mapping and index are unstable. In fact, might as well move them up before the smp_wmb(): I don't see an actual need for that, but if I'm missing something, this way round is safer than the other, and no less efficient. You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is misplaced, and should be left until after the trylock_page(); but left as is has not crashed since, and gives more stringent assurance. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Requires: 605ca5ed ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()") Signed-off-by:
-
Hugh Dickins authored
commit 906f9cdf upstream. The term "freeze" is used in several ways in the kernel, and in mm it has the particular meaning of forcing page refcount temporarily to 0. freeze_page() is just too confusing a name for a function that unmaps a page: rename it unmap_page(), and rename unfreeze_page() remap_page(). Went to change the mention of freeze_page() added later in mm/rmap.c, but found it to be incorrect: ordinary page reclaim reaches there too; but the substance of the comment still seems correct, so edit it down. Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils Fixes: e9b61f19 ("thp: reintroduce split_huge_page()") Signed-off-by:
-
- 01 Dec, 2018 25 commits
-
-
Greg Kroah-Hartman authored
-
Hugues Fruchet authored
commit a8f438c6 upstream. When switching from auto to manual mode, V4L2 core is calling g_volatile_ctrl() in manual mode in order to get the manual initial value. Remove the manual mode check/return to not break this behaviour. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Tested-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Hugues Fruchet authored
commit c2c3f42d upstream. ov5640_set_mode_exposure_calc() is checking binning value but binning value read is buggy, fix this. Rename ov5640_binning_on() to ov5640_get_binning() as per other similar functions. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Hugues Fruchet authored
commit 3cca8ef5 upstream. Ensure that auto gain and auto exposure are well restored when changing mode. Signed-off-by:
-
Hugues Fruchet authored
commit dc29a1c1 upstream. Symptom was black image when capturing HD or 5Mp picture due to manual exposure set to 1 while it was intended to set autoexposure to "manual", fix this. Fixes: bf4a4b51 ("media: ov5640: Don't force the auto exposure state at start time"). Signed-off-by:
-
Jacopo Mondi authored
commit bad1774e upstream. As of: commit 476dec01 ("media: ov5640: Add horizontal and vertical totals") the timings parameters gets programmed separately from the static register values array. When changing capture mode, the vertical and horizontal totals gets inspected by the set_mode_exposure_calc() functions, and only later programmed with the new values. This means exposure, light banding filter and shutter gain are calculated using the previous timings, and are thus not correct. Fix this by programming timings right after the static register value table has been sent to the sensor in the ov5640_load_regs() function. Fixes: 476dec01 ("media: ov5640: Add horizontal and vertical totals") Tested-by: Steve Longerbeam <slongerbeam@gmail.com> # i.MX6q SabreSD, CSI-2 Tested-by: Loic Poulain <loic.poulain@linaro.org> # Dragonboard-410c, CSI-2 Signed-off-by:
Samuel Bobrowicz <sam@elite-embedded.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Jacopo Mondi authored
commit aa4bb8b8 upstream. Rework the MIPI interface startup sequence with the following changes: - Remove MIPI bus initialization from the initial settings blob - At set_power(1) time power up MIPI Tx/Rx and set data and clock lanes in LP11 during 'sleep' and 'idle' with MIPI clock in non-continuous mode. - At s_stream time enable/disable the MIPI interface output. - Restore default settings at set_power(0) time. Before this commit the sensor MIPI interface was initialized with settings that require a start/stop sequence at power-up time in order to force lanes into LP11 state, as they were initialized in LP00 when in 'sleep mode', which is assumed to be the sensor manual definition for the D-PHY defined stop mode. The stream start/stop was performed by enabling disabling clock gating, and had the side effect to change the lanes sleep mode configuration when stream was stopped. Clock gating/ungating: - ret = ov5640_mod_reg(sensor, OV5640_REG_MIPI_CTRL00, BIT(5), - on ? 0 : BIT(5)); - if (ret) Set lanes in LP11 when in 'sleep mode': - ret = ov5640_write_reg(sensor, OV5640_REG_PAD_OUTPUT00, - on ? 0x00 : 0x70); This commit fixes an issue reported by Jagan Teki on i.MX6 platforms that prevents the host interface from powering up correctly: https://lkml.org/lkml/2018/6/1/38 It also improves MIPI capture operations stability on my testing platform where MIPI capture often failed and returned all-purple frames. Fixes: f22996db ("media: ov5640: add support of DVP parallel interface") Tested-by: Steve Longerbeam <slongerbeam@gmail.com> (i.MX6q SabreSD, CSI-2) Tested-by: Loic Poulain <loic.poulain@linaro.org> (Dragonboard-410c, CSI-2) Reported-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Paul E. McKenney authored
commit 92aa39e9 upstream. The per-CPU rcu_dynticks.rcu_urgent_qs variable communicates an urgent need for an RCU quiescent state from the force-quiescent-state processing within the grace-period kthread to context switches and to cond_resched(). Unfortunately, such urgent needs are not communicated to need_resched(), which is sometimes used to decide when to invoke cond_resched(), for but one example, within the KVM vcpu_run() function. As of v4.15, this can result in synchronize_sched() being delayed by up to ten seconds, which can be problematic, to say nothing of annoying. This commit therefore checks rcu_dynticks.rcu_urgent_qs from within rcu_check_callbacks(), which is invoked from the scheduling-clock interrupt handler. If the current task is not an idle task and is not executing in usermode, a context switch is forced, and either way, the rcu_dynticks.rcu_urgent_qs variable is set to false. If the current task is an idle task, then RCU's dyntick-idle code will detect the quiescent state, so no further action is required. Similarly, if the task is executing in usermode, other code in rcu_check_callbacks() and its called functions will report the corresponding quiescent state. Reported-by:
Marius Hillenbrand <mhillenb@amazon.de> Reported-by:
David Woodhouse <dwmw2@infradead.org> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: Backported to make patch apply cleanly on older versions. ] Tested-by:
-
Andreas Gruenbacher authored
commit c26b5aa8 upstream. GFS2 passes the inode buffer head (dibh) from gfs2_iomap_begin to gfs2_iomap_end in iomap->private. It sets that private pointer in gfs2_iomap_get. Users of gfs2_iomap_get other than gfs2_iomap_begin would have to release iomap->private, but this isn't done correctly, leading to a leak of buffer head references. To fix this, move the code for setting iomap->private from gfs2_iomap_get to gfs2_iomap_begin. Fixes: 64bc06bb ("gfs2: iomap buffered write support") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit b97b3d9f upstream. If we are not echoing the data to userspace or the console is in icanon mode, then perhaps it is a "secret" so we should wipe it once we are done with it. This mirrors the logic that the audit code has. Reported-by:
aszlig <aszlig@nix.build> Tested-by:
Milan Broz <gmazyland@gmail.com> Tested-by:
Daniel Zatovic <daniel.zatovic@gmail.com> Tested-by:
-
Linus Torvalds authored
commit c9a8e5fc upstream. After we are done with the tty buffer, zero it out. Reported-by:
-
Sebastien Boisvert authored
commit 4d54954a upstream. Tracing the event "fs_dax:dax_pmd_insert_mapping" with perf produces this warning: [fs_dax:dax_pmd_insert_mapping] unknown op '~' It is printed in process_op (tools/lib/traceevent/event-parse.c) because '~' is parsed as a binary operator. perf reads the format of fs_dax:dax_pmd_insert_mapping ("print fmt") from /sys/kernel/debug/tracing/events/fs_dax/dax_pmd_insert_mapping/format . The format contains: ~(((u64) ~(~(((1UL) << 12)-1))) ^ \ interpreted as a binary operator by process_op(). This part is generated in the declaration of the event class dax_pmd_insert_mapping_class in include/trace/events/fs_dax.h : __print_flags_u64(__entry->pfn_val & PFN_FLAGS_MASK, "|", PFN_FLAGS_TRACE), This patch adds a pair of parentheses in the declaration of PFN_FLAGS_MASK to make sure that '~' is parsed as a unary operator by perf. The part of the format that was problematic is now: ~(((u64) (~(~(((1UL) << 12)-1)))) Now, all the '~' are parsed as unary operators. Link: http://lkml.kernel.org/r/20181021145939.8760-1-sebhtml@videotron.qc.caSigned-off-by:
Sebastien Boisvert <sebhtml@videotron.qc.ca> Acked-by:
Dan Williams <dan.j.williams@intel.com> Cc: "Steven Rostedt (VMware)" <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Tzvetomir Stoyanov (VMware)" <tz.stoyanov@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Elenie Godzaridis <arangradient@gmail.com> Cc: <stable@vger.kerenl.org> Signed-off-by:
-
Matthew Wilcox authored
commit 25bbe21b upstream. After calling get_unlocked_entry(), you have to call put_unlocked_entry() to avoid subsequent waiters losing wakeups. Fixes: c2a7d2a1 ("filesystem-dax: Introduce dax_lock_mapping_entry()") Cc: stable@vger.kernel.org Signed-off-by:
-
Michal Hocko authored
[ Upstream commit c63ae43b ] Konstantin has noticed that kvmalloc might trigger the following warning: WARNING: CPU: 0 PID: 6676 at mm/vmstat.c:986 __fragmentation_index+0x54/0x60 [...] Call Trace: fragmentation_index+0x76/0x90 compaction_suitable+0x4f/0xf0 shrink_node+0x295/0x310 node_reclaim+0x205/0x250 get_page_from_freelist+0x649/0xad0 __alloc_pages_nodemask+0x12a/0x2a0 kmalloc_large_node+0x47/0x90 __kmalloc_node+0x22b/0x2e0 kvmalloc_node+0x3e/0x70 xt_alloc_table_info+0x3a/0x80 [x_tables] do_ip6t_set_ctl+0xcd/0x1c0 [ip6_tables] nf_setsockopt+0x44/0x60 SyS_setsockopt+0x6f/0xc0 do_syscall_64+0x67/0x120 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 the problem is that we only check for an out of bound order in the slow path and the node reclaim might happen from the fast path already. This is fixable by making sure that kvmalloc doesn't ever use kmalloc for requests that are larger than KMALLOC_MAX_SIZE but this also shows that the code is rather fragile. A recent UBSAN report just underlines that by the following report UBSAN: Undefined behaviour in mm/page_alloc.c:3117:19 shift exponent 51 is too large for 32-bit type 'int' CPU: 0 PID: 6520 Comm: syz-executor1 Not tainted 4.19.0-rc2 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xd2/0x148 lib/dump_stack.c:113 ubsan_epilogue+0x12/0x94 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x2b6/0x30b lib/ubsan.c:425 __zone_watermark_ok+0x2c7/0x400 mm/page_alloc.c:3117 zone_watermark_fast mm/page_alloc.c:3216 [inline] get_page_from_freelist+0xc49/0x44c0 mm/page_alloc.c:3300 __alloc_pages_nodemask+0x21e/0x640 mm/page_alloc.c:4370 alloc_pages_current+0xcc/0x210 mm/mempolicy.c:2093 alloc_pages include/linux/gfp.h:509 [inline] __get_free_pages+0x12/0x60 mm/page_alloc.c:4414 dma_mem_alloc+0x36/0x50 arch/x86/include/asm/floppy.h:156 raw_cmd_copyin drivers/block/floppy.c:3159 [inline] raw_cmd_ioctl drivers/block/floppy.c:3206 [inline] fd_locked_ioctl+0xa00/0x2c10 drivers/block/floppy.c:3544 fd_ioctl+0x40/0x60 drivers/block/floppy.c:3571 __blkdev_driver_ioctl block/ioctl.c:303 [inline] blkdev_ioctl+0xb3c/0x1a30 block/ioctl.c:601 block_ioctl+0x105/0x150 fs/block_dev.c:1883 vfs_ioctl fs/ioctl.c:46 [inline] do_vfs_ioctl+0x1c0/0x1150 fs/ioctl.c:687 ksys_ioctl+0x9e/0xb0 fs/ioctl.c:702 __do_sys_ioctl fs/ioctl.c:709 [inline] __se_sys_ioctl fs/ioctl.c:707 [inline] __x64_sys_ioctl+0x7e/0xc0 fs/ioctl.c:707 do_syscall_64+0xc4/0x510 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Note that this is not a kvmalloc path. It is just that the fast path really depends on having sanitzed order as well. Therefore move the order check to the fast path. Link: http://lkml.kernel.org/r/20181113094305.GM15120@dhcp22.suse.czSigned-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Byoungyoung Lee <lifeasageek@gmail.com> Cc: "Dae R. Jeong" <threeearcat@gmail.com> Signed-off-by:
-
Yufen Yu authored
[ Upstream commit 1a413646 ] Other filesystems such as ext4, f2fs and ubifs all return ENXIO when lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset. man 2 lseek says : EINVAL whence is not valid. Or: the resulting file offset would be : negative, or beyond the end of a seekable device. : : ENXIO whence is SEEK_DATA or SEEK_HOLE, and the file offset is beyond : the end of the file. Make tmpfs return ENXIO under these circumstances as well. After this, tmpfs also passes xfstests's generic/448. [akpm@linux-foundation.org: rewrite changelog] Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.comSigned-off-by:
Yufen Yu <yuyufen@huawei.com> Reviewed-by:
-
Michal Hocko authored
[ Upstream commit 9d789999 ] Page state checks are racy. Under a heavy memory workload (e.g. stress -m 200 -t 2h) it is quite easy to hit a race window when the page is allocated but its state is not fully populated yet. A debugging patch to dump the struct page state shows has_unmovable_pages: pfn:0x10dfec00, found:0x1, count:0x0 page:ffffea0437fb0000 count:1 mapcount:1 mapping:ffff880e05239841 index:0x7f26e5000 compound_mapcount: 1 flags: 0x5fffffc0090034(uptodate|lru|active|head|swapbacked) Note that the state has been checked for both PageLRU and PageSwapBacked already. Closing this race completely would require some sort of retry logic. This can be tricky and error prone (think of potential endless or long taking loops). Workaround this problem for movable zones at least. Such a zone should only contain movable pages. Commit 15c30bc0 ("mm, memory_hotplug: make has_unmovable_pages more robust") has told us that this is not strictly true though. Bootmem pages should be marked reserved though so we can move the original check after the PageReserved check. Pages from other zones are still prone to races but we even do not pretend that memory hotremove works for those so pre-mature failure doesn't hurt that much. Link: http://lkml.kernel.org/r/20181106095524.14629-1-mhocko@kernel.org Fixes: 15c30bc0 ("mm, memory_hotplug: make has_unmovable_pages more robust") Signed-off-by:
Baoquan He <bhe@redhat.com> Tested-by:
Oscar Salvador <osalvador@suse.de> Acked-by:
Balbir Singh <bsingharora@gmail.com> Signed-off-by:
-
Vitaly Wool authored
[ Upstream commit ca0246bb ] Reclaim and free can race on an object which is basically fine but in order for reclaim to be able to map "freed" object we need to encode object length in the handle. handle_to_chunks() is then introduced to extract object length from a handle and use it during mapping. Moreover, to avoid racing on a z3fold "headless" page release, we should not try to free that page in z3fold_free() if the reclaim bit is set. Also, in the unlikely case of trying to reclaim a page being freed, we should not proceed with that page. While at it, fix the page accounting in reclaim function. This patch supersedes "[PATCH] z3fold: fix reclaim lock-ups". Link: http://lkml.kernel.org/r/20181105162225.74e8837d03583a9b707cf559@gmail.comSigned-off-by:
Vitaly Wool <vitaly.vul@sony.com> Signed-off-by:
Jongseok Kim <ks77sj@gmail.com> Reported-by-by:
Snild Dolkow <snild@sony.com> Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit 33412b86 ] Commit: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT") deferred the unmap of the early mapping of the UEFI memory map to accommodate the ACPI BGRT code, which looks up the memory type that backs the BGRT table to validate it against the requirements of the UEFI spec. Unfortunately, this causes problems on ARM, which does not permit early mappings to persist after paging_init() is called, resulting in a WARN() splat. Since we don't support the BGRT table on ARM anway, let's revert ARM to the old behaviour, which is to take down the early mapping at the end of efi_init(). Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 3ea86495 ("efi/arm: preserve early mapping of UEFI memory ...") Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Satheesh Rajendran authored
[ Upstream commit 437ccdc8 ] When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e39d8a18 ] If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Prarit Bhargava authored
[ Upstream commit c2b94c72 ] gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Cc: Jonathan Toppins <jtoppins@redhat.com> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: kgdb-bugreport@lists.sourceforge.net Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Philip Yang authored
[ Upstream commit c837243f ] The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Olof Johansson authored
[ Upstream commit ef3a6140 ] Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
David Abdurachmanov authored
[ Upstream commit f157d411 ] Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by:
David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit e3d5e573 ] Signed-off-by:
-
